User Manual

FCC ID: 2AD5YBCBH5680

Users Manual

Download: PDF
FCCID_4457531


FCC Statement Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help The device must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 1

LOCATION OF CONTROLS: FRONT: REAR: 2 1 3 4 4 5 7 6 1. Top Cover 2. Charging for Left Earbud 3. Charging for Right Earbud 4. LED Indicators 5. Button 6. Micro USB Port (for charging only) 7. Charging Station 1 EARBUDS: 2 2 1. Control Button 4 4 2. Microphone 3. Contacts for Charging 4. LED Indicators 3 3 2

POWER SOURCE: The Charging Station and Earbuds equipped built-in Li-ion rechargeable battery; recharge it before use or when it is drained as below. Charging Station: 1. Connect the Micro USB Plug from the supplied USB Connection Cable to the Micro USB Port on the rear of Charging Station. 2. Connect the full sized USB Plug from the supplied USB Connection Cable to the USB Port on the Computer or USB Charger. (Computer and USB Charger NOT Supplied). 3. When charging, the Red Charging Indicator on the front of Charging Station will blink. When charging is complete, it will stop blinking. To Computer or USB Charger To Micro USB Port Earbuds: 1. Open the Top Cover on the top of the Charging Station. 2. Place the Left Earbud into the Left Charging Port. 3. Place the Right Earbud into the Right Charging Port as illustrated below: 3

4. Press the Button on the front of Charging Station to start charging:  The Blue Indicator on the front of Charging Station will illuminate. (If the Charging Station is also on recharging, the Blue Indicator will turn off, and the Red Indicator will illuminate and blink).  The Red Indicators inside Left/Right Charging Ports will illuminate. When charging is complete, the color of it will turn to Blue. A few minutes later, all indicators will turn off for energy saving. Notes:  The charging time period of Left and Right earbuds may vary. It is normal.  When charging the Charging Station, you can also charge the Earbuds through the station at the same time. (In this settings, only the Red Indicator on front of Charging Station will illuminate and blink. The Blue Charging Indicator will NOT illuminate).  Your battery will last longer if you’re following these simple guidelines for caring and storing:  Before first time use, charge the Charging Station and Earbuds approximately 2 hours until there are fully charged.  Recharge and store the Charging Station and Earbuds within the temperature range of 5℃~ 35℃ (40°F ~ 95°F).  Do not charge longer than 24 hours. Excessive charging or running until battery completely flat will damage battery. Battery life will be extended if you keep the battery fully charged.  Battery life naturally shortens slowly over time.  The rechargeable battery incorporated in this product is not user replaceable. OPERATION: To use the Left Earbud alone: For first time pairing to the Left Earbud to the BT Device ( or repair to a new BT Device ) alone, follow the steps below: 1. Recharge the Earbud as previously instructed. 2. Press and hold the Control Button on the Left Earbud a few seconds to power on:  The Red and Blue Indicators on the Earbud will illuminate and blink. You will also hear an audible prompt from Earbud to say “Power on”. 4

 Power on the external BT Device and enter to BT searching mode. Start pairing following the on screen instructions from the external BT Device. Note:  When the external BT Device searches for the unit, the BT Device name “CBH568” will appear on the BT Device Name List on your external BT Device. Pair your BT Device with it. 3. When paired:  You will hear an audible prompt from Earbud to say “Connected”.  On the Earbud, the Red Indicators will turn off. The Blue Indicator will start blinking slowly. 4. If pairing is complete you may now play music and answer calls with your external BT Device. 5. During Playback:  Using the controls on the paired BT Device to adjust sound level; skip tracks…as usual.  Or, press and hold the Control Button on the Earbud approximately 1 second to skip tracks.  Press the Control Button on the Earbud to pause, press again to resume normal playback. 6. If the Earbud is paired to a Cell Phone and a call is incoming during an active music session:  Press the Control Button on the Earbud then speak to the Microphone to answer the call. When your call is complete, press the button again to disconnect or end the phone call and resume to music playback.  Or, press and hold the Control Button on the Earbud approximately 1 second to decline the incoming call then resume to music playback.  Quick press the button twice to redial the last telephone number your cell phone called. 7. When finished listening, press and hold the Control Button on the Earbud until you hear an audible prompt from Earbud to say “Power off” to shut off the Earbud. To use the Right Earbud alone: For first time pair the Right Earbud to the BT Device ( or repair to a new BT Device) alone, follow the steps below: 1. Recharge the Earbud as previously instructed. 5

2. Press and hold the Control Button on the Right Earbud a few seconds to power on:  The Red and Blue Indicators on the Earbud will illuminate and blink. You will also hear an audible prompt from Earbud to say “Power on”.  Power on the external BT Device and enter to BT searching mode. Start pairing following the on screen instructions from the external BT Device. Note:  When the external BT Device searches for the unit, the BT Device Name “CBH568” will appear on the BT Device Name List of external BT Device. Pair your BT Device with it.  If the Left Earphone was paired to the same BT Device before, another new BT Device name “CBH568” will appear on the BT Device Name List on your BT Device. Pair your BT Device with the NEW name. 3. When paired:  You will hear an audible prompt from Earbud to say “Connected”.  On the Earbud, the Red Indicators will turn off. The Blue Indicator will start blinking slowly. 4. If pairing is complete you may now play music and answer calls with your external BT Device. 5. Other operations is same as Left Earbud. To use both Left & Right Earbuds at the same time: 1. Press and hold the Control Button on the Left and Right Earbuds a few seconds at the same time to power on both earbuds:  Red and Blue indicators on each Earbud will illuminate and blink.  You will also hearing and audible prompt from the Left and Right Earbuds to say “Power on”.  Then, the Red indicators on one Earbud will turn off, and the Blue Indicator on it will start blink slowly. The Red & Blue indicators on the other Earbud will keep illuminating and blinking. 2. Power on the external BT Device and enter to BT searching mode. Start pairing following the on screen instructions from the external BT Device. Note:  When the external BT Device searches for the unit, the BT Device name “CBH568” will appear on the BT Device Name List on your external BT Device. Pair your BT Device with it. 6

 If Left and Right Earbuds was already paired to the same BT Device before. Wait a few seconds, the earbuds will automatically pair to the external BT Device. 3. When paired:  You will hear an audible prompt from Earbuds to say “Connected”.  The Red Indicator on the other Earbud will also turn off, and the Blue Indicator on it will start blink slowly. 4. If pairing is complete you may now play music and answer calls with your external BT Device. 5. During playback:  Using the controls on the paired BT Device to adjust sound level; skip tracks … as usual.  Or, press and hold either one of the Control Button on the Earbuds approximately 1 second to skip tracks.  Press either one of Control Button on the Earbuds to pause, press again to resume normal playback. 6. If the Earbuds are paired to a Cell Phone and a call is incoming during an active music session:  Press either one of the Control Button on the Earbuds then speak to the Microphones to answer the call. When your call is complete, press the button again to disconnect or end the phone call and resume to music playback.  Or, press and hold the Control Button on the Earbud approximately 1 second to decline the incoming call then resume to music playback.  Quick press either one of Control Button twice to redial the last telephone number your cell phone called. 7. When finished listening, press and hold either one of Control Button on the Earbuds until you hear an audible prompt from Earbuds to say “Power off” to shut off the Left and Right Earbuds. Normal Operation after pairing: 1. Power on the external BT Device and enter to BT playback mode. 2. Power on the Left and Right Earbuds as previously instruction. 3. Wait a few seconds, the earbud will automatically pair to the external BT Device. (Some of cell phones may not have the automatically repairing function. Then enter to the BT searching mode in your external BT Device again, start repairing following the on screen instructions from your external BT Device.) 7

4. If pairing is complete you may now play music and answer calls with your external BT Device. TROUBLESHOOTING: Check the following before requesting service: SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION Recharge the built-in battery Can’t power on Buit-in battery drained of Charging Station and Earbuds as page 3-4 Press the Button on the front of Charging The Button on the Station to start charging, Charging Station is in off The Red Indicator on the Position Earbud Charging Port will Illuminate. The Earbuds can NOT be recharging The Charging contacts on the Charging Station and/or Clear it before charging Is dirty The Earbud had not insert to Insert the Earbud the Charging Port firmly into Charging Port firmly Volume level of paired Rise the volume level of No sound or sound weak Device is in low level The paired device Volume level of the paired Reduce the volume level Sound distortion Device too high of the paired device The external BT Device Pair the external BT Device had NOT paired to the unit to the unit as page 4-7 BT not functioning The external BT Device Place the external BT too far from the Earbud Device close to the Earbud 8

GENERAL SPECIFICATIONS: Charging Station: Built-in DC 3.7V, 350mAh (1.295WH) rechargeable Li-ion Battery; Recharge by DC 5V through Micro USB Port Power Source Earbuds: Built-in DC 3.7V, 40 mAh (0.148 WH) rechargeable Li-ion Battery per each Earbud; Recharge by the Charging Station Impedance of the Earbuds 2x20mW; 16 ohm Audio Power 19 mW per channel (Total 38mW, RMS) BT Version 5.0 BT Operation Distance Up to 32 feet in open area PACKAGE INCLUDES: 1 X User’s Manual 1 X Charging Station 2 X Earbuds 1 X USB Connection Cable (For charging the Charging Station only) SPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGE WITHOUT NOTICE 9



Document Created: 2019-09-16 13:15:16
Document Modified: 2019-09-16 13:15:16
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC