Labels and Locations

FCC ID: 2ACTZMSS9019

ID Label/Location Info

Download: PDF
FCCID_4478012

12 11 10 9 8 7 6 5 4 3 2 1 NOTICE EXPORT NOTICE REVISIONS PROPRIETARY NOTICE THIS DOCUMENT AND THE INFORMATION DISCLOSED HEREIN ARE FREEDOM OF INFORMATION ACT (5 USC 552) AND DISCLOSURE THIS TECHNOLOGY IS CONTROLLED UNDER THE EXPORT ECR NO. REV ZONE DESCRIPTION DATE OF CONFIDENTIAL INFORMATION GENERALLY (18 USC 1905) THIS ADMINISTRATION REGULATIONS (EAR) AND MAY NOT BE PROPRIETARY DATA OF AVIATION COMMUNICATION & SURVEILLANCE H H DOCUMENT IS BEING FURNISHED IN CONFIDENCE BY AVIATION 015922 ‐ INITIAL RELEASE 03‐03‐15 SYSTEMS, LLC. NEITHER THIS DOCUMENT NOR THE INFORMATION EXPORTED TO A FOREIGN PERSON, EITHER IN THE U.S. OR COMMUNICATION & SURVEILLANCE SYSTEMS, LLC. THE INFORMATION CONTAINED HEREIN SHALL BE REPRODUCED, USED, OR DISCLOSED DISCLOSED HEREIN FALLS WITHIN EXEMPTION (b) (4) ABROAD, WITHOUT THE PROPER AUTHORIZATION BY THE 016104 A ADDED NOTE 5. 05‐15‐15 TO OTHERS WITHOUT THE WRITTEN AUTHORIZATION OF AVIATION OF 5 USC 552 AND THE PROHIBITIONS OF 18 USC 1905. U.S. DEPARTMENT OF COMMERCE COMMUNICATION & SURVEILLANCE SYSTEMS, LLC. 016284 B UPDATED TITLE. 07‐29‐15 016744 C WAS SH 1 OF 1. 12‐22‐15 017094 D THIS SHEET NOT AFFECTED. SEE SHEET 2. 05‐03‐16 017148 E THIS SHEET NOT AFFECTED. SEE SHEET 2. 05‐18‐16 017230 F THIS SHEET NOT AFFECTED. SEE SHEET 2. 06‐24‐16 017758 G UPDATED ITEM 2. 03‐17‐17 018265 H PL AFFECTED ONLY. 09‐04‐18 G 018906 J ADD HDWR MOD C AND LABEL CHANGE, SEE SHEETS 2 AND 3. 08‐19‐19 G 4 3 2 3 F F 1 E E D D C C NOTES: 1. THIS ASSEMBLY INCLUDES COMPONENTS WHICH ARE SUBJECT CAUTION TO DAMAGE BY ELECTROSTATIC CHARGES; THEREFORE, ALL INTERPRET Aviation Communication & B ELECTROSTATIC SENSITIVE EQUIPMENT COMPONENTS SHALL BE HANDLED IN ACCORDANCE WITH DIMENSIONS AND Surveillance Systems B SPECIAL HANDLING REQUIRED GUIDELINES FOR ELECTROSTATIC DISCHARGE DAMAGE. TOLERANCES PER 19810 North 7th Avenue ASME Y14.5-2009 Phoenix, Arizona 85027-4400 An L3Harris & Thales Company 2. TEST PER ITEM 702. UNLESS OTHERWISE SPECIFIED, DIMENSIONS TITLE: 3 ENTER APPLICABLE SERIAL NUMBER AND DATE OF MANUFACTURE ON LABEL, ITEM 2, AND INSTALL ARE IN INCHES APPROXIMATELY AS SHOWN, PER ITEM 701. TOLERANCES: NGT‐9000RD 4 REFERENCE ITEM 3 FOR INSTRUCTIONS TO PRINT A FW/SW LABEL AND INSTALL APPROXIMATELY AS ANGLES 2 PL DEC N/A N/A END ITEM ASSEMBLY SHOWN PER ITEM 701. 3 PL DEC N/A 5. INSTALLATION KITS ARE IDENTIFIED IN THE INSTALLATION MANUAL, DOCUMENT NUMBER 0040‐17001‐01. DRAWING NO. REV THIRD ANGLE A 9029000‐40000 9029000‐40000 PROJECTION A NEXT ASSY END ITEM 9029000‐40000 J CAGE CODE: SHEET OF APPLICATION 1WYD3 1 4 12 11 10 9 8 7 6 5 4 3 2 1

12 11 10 9 8 7 6 5 4 3 2 1 REVISIONS ECR NO. REV ZONE DESCRIPTION DATE H 016744 C ADDED THIS SHEET. 12‐22‐15 H 017094 D ADDED HDWR MOD B. 05‐03‐16 017148 E HDWR MOD B REV WAS ‐ THRU L. MIN REV WAS M. 05‐18‐16 017230 F HDWR MOD B REV WAS ‐ THRU M. MIN REV WAS N. 06‐24‐16 018906 J HDWR MOD C ADDED FOR FCC ID CHANGE/PA UPDATE. 08‐19‐19 G G F F LYNX NGT‐9000 MODIFICATION STATUS TABLE E E AFFECTED ASSEMBLY MODIFICATION MIN REV HDWR MOD S/W MOD REMARKS NUMBER PART NUMBER REV REPLACED 100mW RESISTORS WITH 250mW ANTI‐SURGE 9020020‐001 ‐ THRU R T N/A A RESISTORS IN THE SURGE PROTECTION CIRCUITRY. 9200‐17500‐01 ‐ THRU N P N/A B NOTCH FOIL TAPE ON J9 COAX CONNECTOR OVER CAL PORT. 9020020‐003 ‐ THRU F G D 9002040‐004 ‐ ‐ N/A C UDPATED POWER AMPLIFIER AND FCC IDENTIFIER D C C B B DRAWING NO. REV A USE OR DISCLOSURE OF INFORMATION ON THIS SHEET IS SUBJECT TO THE 9029000‐40000 J A RESTRICTIONS ON THE FIRST SHEET OF THIS DOCUMENT CAGE CODE: SHEET An L3Harris & Thales Company 1WYD3 2 12 11 10 9 8 7 6 5 4 3 2 1

PRODUCT ENGINEER CONTRACT NO. FSCM NO. REVISION LETTER PARTS LIST 1WYD3 J DESIGN CHECKER END ITEM DRAWING NO. PART ACSS SPECIAL DESIGNATION 9029000-40000 NEXT ASSY LIST TITLE PL9029000-40000 SHEET TABULATION 9029000-40000 NGT-9000RD END ITEM ASSEMBLY 3 UNIT FIND QTY OF ACSS PART OR NOMENCLATURE DESCRIPTION REFERENCE DESIGNATORS CODES NO REQD MEAS PART NUMBER IDENTIFYING NUMBER 1 1 EA 9200-17500-01 TRANSPONDER REMOTE MOUNT WITH DIVERSITY 2 1 EA 9002040-004 LABEL, END ITEM 3 1 EA 9002041 LABEL, COMPOSITE FW/SW 4 X AR 9002044-003 BOOTLOADER MASTER MEDIA 701 X AR M4061949 MANUFACTURING SPECIFICATION 5 702 X AR 8002500-051 TEST SPECIFICATION 5 SPECIAL SYMBOLS FIND (ITEM) NUMBERS 1 TO 999 CODE LEGEND (FOR ACSS REFERENCE ONLY) X NO SPECIFIC QTY REQD (QTY TABLE) - ASSY OR DETAIL ITEMS - REF DOCUMENTS, BULK SUNDRIES OR ACCEPTABLE 1 SELECT AT ASSEMBLY 4 BULK OR SUNDRY ITEM 8 SELECT PER AO OR MI * ORIGINAL CONFIGURATION (QTY TABLE) - AW/PS CRITICAL ITEMS SUBSTITUTES (ALTERNATE ITEMS) (FIRST SELECT ITEM) 5 REFERENCE DOCUMENT V VENDOR (SUPPLIER) ITEM- MATERIAL CODE (NOT A DWG) - SPECIAL CONFIGURATION - EMP/RADIATION HARD ITEMS 2 SUBSEQUENT SELECT (ITEMS) 7 MACHINED CASTING DWG SPEC SOURCE DWG _ NOT APPLICABLE CONTROL ITEMS 3 ASSEMBLY * CUSTOMER-FURNISHED ITEM NOTE: SEE BASIC DRAWING FOR PROPRIETARY OR DATA RIGHTS NOTATION.

PRODUCT ENGINEER CONTRACT NO. FSCM NO. REVISION LETTER PARTS LIST 1WYD3 J DESIGN CHECKER END ITEM DRAWING NO. REVISION ACSS SPECIAL DESIGNATION 9029000-40000 NEXT ASSY LIST TITLE PL9029000-40000 SHEET RECORD 9029000-40000 NGT-9000RD END ITEM ASSEMBLY 4 REV DESCRIPTION OF REVISIONS DATE APPROVAL LTR - INITIAL RELEASE. PER ECR 015922. 03/03/15 A PL NOT AFFECTED. PER ECR 016104. 5/15/2015 B PL NOT AFFECTED. PER ECR 016284. 7/29/2015 C PL NOT AFFECTED. PER ECR 016744. 12/22/2015 D PL NOT AFFECTED. PER ECR 017094. 5/3/2016 E PL NOT AFFECTED. PER ECR 017148. 5/18/2016 F PL NOT AFFECTED. PER ECR 017230. 6/24/2016 G PL NOT AFFECTED. PER ECR 017758. 3/17/2017 H ITEM 4 WAS 9002044-002. PER ECR 018265. 9/4/2018 J ITEM 2 WAS 9002040-002. PER ECR 018906. 8/19/2019 SPECIAL SYMBOLS FIND (ITEM) NUMBERS 1 TO 999 CODE LEGEND (FOR ACSS REFERENCE ONLY) X NO SPECIFIC QTY REQD (QTY TABLE) - ASSY OR DETAIL ITEMS - REF DOCUMENTS, BULK SUNDRIES OR ACCEPTABLE 1 SELECT AT ASSEMBLY 4 BULK OR SUNDRY ITEM 8 SELECT PER AO OR MI * ORIGINAL CONFIGURATION (QTY TABLE) - AW/PS CRITICAL ITEMS SUBSTITUTES (ALTERNATE ITEMS) (FIRST SELECT ITEM) 5 REFERENCE DOCUMENT V VENDOR (SUPPLIER) ITEM- MATERIAL CODE (NOT A DWG) - SPECIAL CONFIGURATION - EMP/RADIATION HARD ITEMS 2 SUBSEQUENT SELECT (ITEMS) 7 MACHINED CASTING DWG SPEC SOURCE DWG _ NOT APPLICABLE CONTROL ITEMS 3 ASSEMBLY * CUSTOMER-FURNISHED ITEM NOTE: SEE BASIC DRAWING FOR PROPRIETARY OR DATA RIGHTS NOTATION.

12 11 10 9 8 7 6 5 4 3 2 1 NOTICE EXPORT NOTICE REVISIONS PROPRIETARY NOTICE THIS DOCUMENT AND THE INFORMATION DISCLOSED HEREIN ARE FREEDOM OF INFORMATION ACT (5 USC 552) AND DISCLOSURE THIS TECHNOLOGY IS CONTROLLED UNDER THE EXPORT ECR NO. REV ZONE DESCRIPTION DATE OF CONFIDENTIAL INFORMATION GENERALLY (18 USC 1905) THIS ADMINISTRATION REGULATIONS (EAR) AND MAY NOT BE PROPRIETARY DATA OF AVIATION COMMUNICATION & SURVEILLANCE H H DOCUMENT IS BEING FURNISHED IN CONFIDENCE BY AVIATION 015755 ‐ INITIAL RELEASE 01‐07‐15 SYSTEMS, LLC. NEITHER THIS DOCUMENT NOR THE INFORMATION EXPORTED TO A FOREIGN PERSON, EITHER IN THE U.S. OR COMMUNICATION & SURVEILLANCE SYSTEMS, LLC. THE INFORMATION CONTAINED HEREIN SHALL BE REPRODUCED, USED, OR DISCLOSED DISCLOSED HEREIN FALLS WITHIN EXEMPTION (b) (4) ABROAD, WITHOUT THE PROPER AUTHORIZATION BY THE 015801 A UPDATED NOTE 3. 01‐16‐15 TO OTHERS WITHOUT THE WRITTEN AUTHORIZATION OF AVIATION OF 5 USC 552 AND THE PROHIBITIONS OF 18 USC 1905. U.S. DEPARTMENT OF COMMERCE COMMUNICATION & SURVEILLANCE SYSTEMS, LLC. 016027 016104 B UPDATED LABEL PICTORIAL. ADDED NOTE 5. UPDATEDD NOTE 3. 05‐15‐15 016109 016744 C WAS SH 1 OF 1. 12‐22‐15 017094 D THIS SHEET NOT AFFECTED. SEE SHEET 2. 05‐03‐16 017148 E THIS SHEET NOT AFFECTED. SEE SHEET 2. 05‐18‐16 017230 F THIS SHEET NOT AFFECTED. SEE SHEET 2. 06‐24‐16 4 3 2 3 017758 G UPDATED ITEM 2. 03‐17‐17 G 018265 H PL AFFECTED ONLY. 09‐04‐18 G 018906 J ADD HDWR MOD C AND LABEL CHANGE, SEE SHEETS 2 AND 3. 08‐19‐19 F F E E 1 D D C C NOTES: INTERPRET B 1. THIS ASSEMBLY INCLUDES COMPONENTS WHICH ARE SUBJECT DIMENSIONS AND Aviation Communication & B CAUTION TO DAMAGE BY ELECTROSTATIC CHARGES; THEREFORE, ALL TOLERANCES PER ASME Y14.5-2009 Surveillance Systems 19810 North 7th Avenue ELECTROSTATIC SENSITIVE EQUIPMENT SPECIAL HANDLING REQUIRED COMPONENTS SHALL BE HANDLED IN ACCORDANCE WITH Phoenix, Arizona 85027-4400 GUIDELINES FOR ELECTROSTATIC DISCHARGE DAMAGE. An L3Harris & Thales Company UNLESS OTHERWISE 2. TEST PER ITEM 702. SPECIFIED, DIMENSIONS TITLE: ARE IN INCHES 3 ENTER APPLICABLE SERIAL NUMBER AND DATE OF MANUFACTURE OF LABEL, ITEM 2, AND INSTALL TOLERANCES: NGT‐9000D APPROXIMATELY AS SHOWN, PER ITEM 701. ANGLES 2 PL DEC N/A N/A END ITEM ASSEMBLY 4 REFERENCE ITEM 3 FOR INSTRUCTIONS TO PRINT A FW/SW LABEL AND INSTALL APPROXIMATELY AS 3 PL DEC N/A SHOWN, PER ITEM 701. DRAWING NO. REV THIRD ANGLE A 9029000-20000 9029000-20000 PROJECTION 9029000‐20000 J A 5. INSTALLATION KITS ARE IDENTIFIED IN THE INSTALLATION MANUAL, DOCUMENT NUMBER 0040‐17001‐01. NEXT ASSY END ITEM CAGE CODE: SHEET OF APPLICATION 1WYD3 1 4 12 11 10 9 8 7 6 5 4 3 2 1

12 11 10 9 8 7 6 5 4 3 2 1 REVISIONS ECR NO. REV ZONE DESCRIPTION DATE H 016744 C ADDED THIS SHEET. 12‐22‐15 H 017094 D ADDED HDWR MOD B. 05‐03‐16 017148 E HDWR MOD B REV WAS ‐ THRU AA. MIN REV WAS AB. 05‐18‐16 017230 F HDWR MOD B REV WAS ‐ THRU AB. MIN REV WAS AC. 06‐24‐16 018906 J HDWR MOD C ADDED FOR FCC ID CHANGE/PA UPDATE. 08‐19‐19 G G F F LYNX NGT‐9000 MODIFICATION STATUS TABLE AFFECTED ASSEMBLY MODIFICATION MIN REV NUMBER HDWR MOD S/W MOD REMARKS PART NUMBER REV E 9020020‐001 ‐ THRU R T N/A A REPLACED 100mW RESISTORS WITH 250mW ANTI‐SURGE RESISTORS IN THE SURGE E PROTECTION CIRCUITRY. NOTCH FOIL TAPE ON J9 COAX CONNECTOR 9200‐17000‐01 ‐ THRU AC AD N/A B OVER CAL PORT. 9020020‐003 ‐ THRU F G UPDATED FINAL POWER AMPLIFIER AND FCC N/A C 9002040‐003 ‐ ‐ IDENTIFIER D D C C B B DRAWING NO. REV A USE OR DISCLOSURE OF INFORMATION 9029000‐20000 J A ON THIS SHEET IS SUBJECT TO THE RESTRICTIONS ON THE FIRST SHEET CAGE CODE: SHEET An L3Harris & Thales Company OF THIS DOCUMENT 1WYD3 2 12 11 10 9 8 7 6 5 4 3 2 1

PRODUCT ENGINEER CONTRACT NO. FSCM NO. REVISION LETTER PARTS LIST 1WYD3 J DESIGN CHECKER END ITEM DRAWING NO. PART ACSS SPECIAL DESIGNATION 9029000-20000 NEXT ASSY PL9029000-20000 LIST TITLE SHEET TABULATION 9029000-20000 NGT-9000D END ITEM ASSEMBLY 3 UNIT FIND QTY OF ACSS PART OR NOMENCLATURE DESCRIPTION REFERENCE DESIGNATORS CODES NO REQD MEAS PART NUMBER IDENTIFYING NUMBER 1 1 EA 9200-17000-01 TRANSPONDER PANEL WITH DIVERSITY 2 1 EA 9002040-003 LABEL, END ITEM 3 1 EA 9002041 LABEL, COMPOSITE FW/SW 4 X AR 9002044-003 BOOTLOADER MASTER MEDIA 701 X AR M4061949 MANUFACTURING SPECIFICATION 5 702 X AR 8002500-051 TEST SPECIFICATION 5 SPECIAL SYMBOLS FIND (ITEM) NUMBERS 1 TO 999 CODE LEGEND (FOR ACSS REFERENCE ONLY) X NO SPECIFIC QTY REQD (QTY TABLE) - ASSY OR DETAIL ITEMS - REF DOCUMENTS, BULK SUNDRIES OR ACCEPTABLE 1 SELECT AT ASSEMBLY 4 BULK OR SUNDRY ITEM 8 SELECT PER AO OR MI * ORIGINAL CONFIGURATION (QTY TABLE) - AW/PS CRITICAL ITEMS SUBSTITUTES (ALTERNATE ITEMS) (FIRST SELECT ITEM) 5 REFERENCE DOCUMENT V VENDOR (SUPPLIER) ITEM- MATERIAL CODE (NOT A DWG) - SPECIAL CONFIGURATION - EMP/RADIATION HARD ITEMS 2 SUBSEQUENT SELECT (ITEMS) 7 MACHINED CASTING DWG SPEC SOURCE DWG _ NOT APPLICABLE CONTROL ITEMS 3 ASSEMBLY * CUSTOMER-FURNISHED ITEM NOTE: SEE BASIC DRAWING FOR PROPRIETARY OR DATA RIGHTS NOTATION.

PRODUCT ENGINEER CONTRACT NO. FSCM NO. REVISION LETTER PARTS LIST 1WYD3 J DESIGN CHECKER END ITEM DRAWING NO. REVISION ACSS SPECIAL DESIGNATION 9029000-20000 NEXT ASSY PL9029000-20000 LIST TITLE SHEET RECORD 9029000-20000 NGT-9000D END ITEM ASSEMBLY 4 REV DESCRIPTION OF REVISIONS DATE APPROVAL LTR - INITIAL RELEASE. PER ECR 015755. 01/07/15 A PL NOT AFFECTED. PER ECR 015801. 1/16/2015 B PL NOT AFFECTED. PER ECR 016027, 016104, AND 016109. 5/15/2015 C PL NOT AFFECTED. PER ECR 016744. 12/22/2015 D PL NOT AFFECTED. PER ECR 017094. 5/3/2016 E PL NOT AFFECTED. PER ECR 017148. 5/18/2016 F PL NOT AFFECTED. PER ECR 017230. 6/24/2016 G PL NOT AFFECTED. PER ECR 017758. 3/17/2017 H ITEM 4 WAS 9002044-001. PER ECR018265. 9/4/2018 J ITEM 2 WAS 9002040-001. PER ECR 018906. 8/19/2019 SPECIAL SYMBOLS FIND (ITEM) NUMBERS 1 TO 999 CODE LEGEND (FOR ACSS REFERENCE ONLY) X NO SPECIFIC QTY REQD (QTY TABLE) - ASSY OR DETAIL ITEMS - REF DOCUMENTS, BULK SUNDRIES OR ACCEPTABLE 1 SELECT AT ASSEMBLY 4 BULK OR SUNDRY ITEM 8 SELECT PER AO OR MI * ORIGINAL CONFIGURATION (QTY TABLE) - AW/PS CRITICAL ITEMS SUBSTITUTES (ALTERNATE ITEMS) (FIRST SELECT ITEM) 5 REFERENCE DOCUMENT V VENDOR (SUPPLIER) ITEM- MATERIAL CODE (NOT A DWG) - SPECIAL CONFIGURATION - EMP/RADIATION HARD ITEMS 2 SUBSEQUENT SELECT (ITEMS) 7 MACHINED CASTING DWG SPEC SOURCE DWG _ NOT APPLICABLE CONTROL ITEMS 3 ASSEMBLY * CUSTOMER-FURNISHED ITEM NOTE: SEE BASIC DRAWING FOR PROPRIETARY OR DATA RIGHTS NOTATION.

8 7 6 5 4 3 2 1 NOTICE EXPORT NOTICE REVISIONS PROPRIETARY NOTICE THIS DOCUMENT AND THE INFORMATION DISCLOSED HEREIN ARE FREEDOM OF INFORMATION ACT (5 USC 552) AND DISCLOSURE THIS TECHNOLOGY IS CONTROLLED UNDER THE EXPORT ECR NO. REV ZONE DESCRIPTION DATE OF CONFIDENTIAL INFORMATION GENERALLY (18 USC 1905) THIS ADMINISTRATION REGULATIONS (EAR) AND MAY NOT BE PROPRIETARY DATA OF AVIATION COMMUNICATION & SURVEILLANCE H H DOCUMENT IS BEING FURNISHED IN CONFIDENCE BY AVIATION 018906 ‐ INITIAL RELEASE 08‐20‐19 SYSTEMS, LLC. NEITHER THIS DOCUMENT NOR THE INFORMATION EXPORTED TO A FOREIGN PERSON, EITHER IN THE U.S. OR COMMUNICATION & SURVEILLANCE SYSTEMS, LLC. THE INFORMATION CONTAINED HEREIN SHALL BE REPRODUCED, USED, OR DISCLOSED DISCLOSED HEREIN FALLS WITHIN EXEMPTION (b) (4) ABROAD, WITHOUT THE PROPER AUTHORIZATION BY THE TO OTHERS WITHOUT THE WRITTEN AUTHORIZATION OF AVIATION OF 5 USC 552 AND THE PROHIBITIONS OF 18 USC 1905. U.S. DEPARTMENT OF COMMERCE COMMUNICATION & SURVEILLANCE SYSTEMS, LLC. G G 3.00±.05 F F 1 6 2.00±.05 E E 3 D D 2 5 C C NOTES: 1 SERIAL NO: THE APPLICABLE ARTICLE SHALL BE MARKED WITH A UNIQUE SERIAL NUMBER. INTERPRET B 2 ENTER DATE OF MANUFACTURE IN LOCATION SHOWN IN FORMAT MMYYYY. DIMENSIONS AND Aviation Communication & Surveillance Systems B TOLERANCES PER ASME Y14.5-2009 19810 North 7th Avenue Phoenix, Arizona 85027-4400 3 ENTER QR CODE IN LOCATION SHOWN. An L3Harris & Thales Company UNLESS OTHERWISE SPECIFIED, DIMENSIONS TITLE: 4. MATERIAL: BRADY LABEL, WHITE POLYESTER (B‐483) ADHESIVE BACKED, OR EQUIVALENT. ARE IN INCHES TOLERANCES: NGT‐9000RD 5 WRAPPED TEXT IS PERMISSIBLE. ANGLES 2 PL DEC N/A N/A END ITEM LABEL 3 PL DEC N/A 6 TO CLAIM "MADE IN THE USA", FINAL ACCEPTANCE MUST BE PERFORMED IN THE UNITED STATES. DRAWING NO. REV THIRD ANGLE A 9029000‐40000 9029000‐40000 PROJECTION 9002040‐004 ‐ A NEXT ASSY END ITEM CAGE CODE: SHEET OF APPLICATION 1WYD3 1 1 8 7 6 5 4 3 2 1

8 7 6 5 4 3 2 1 NOTICE EXPORT NOTICE REVISIONS PROPRIETARY NOTICE THIS DOCUMENT AND THE INFORMATION DISCLOSED HEREIN ARE FREEDOM OF INFORMATION ACT (5 USC 552) AND DISCLOSURE THIS TECHNOLOGY IS CONTROLLED UNDER THE EXPORT ECR NO. REV ZONE DESCRIPTION DATE OF CONFIDENTIAL INFORMATION GENERALLY (18 USC 1905) THIS ADMINISTRATION REGULATIONS (EAR) AND MAY NOT BE PROPRIETARY DATA OF AVIATION COMMUNICATION & SURVEILLANCE H H DOCUMENT IS BEING FURNISHED IN CONFIDENCE BY AVIATION 018906 ‐ INITIAL RELEASE 08‐20‐19 SYSTEMS, LLC. NEITHER THIS DOCUMENT NOR THE INFORMATION EXPORTED TO A FOREIGN PERSON, EITHER IN THE U.S. OR COMMUNICATION & SURVEILLANCE SYSTEMS, LLC. THE INFORMATION CONTAINED HEREIN SHALL BE REPRODUCED, USED, OR DISCLOSED DISCLOSED HEREIN FALLS WITHIN EXEMPTION (b) (4) ABROAD, WITHOUT THE PROPER AUTHORIZATION BY THE TO OTHERS WITHOUT THE WRITTEN AUTHORIZATION OF AVIATION OF 5 USC 552 AND THE PROHIBITIONS OF 18 USC 1905. U.S. DEPARTMENT OF COMMERCE COMMUNICATION & SURVEILLANCE SYSTEMS, LLC. G G 3.00±.05 F F 1 6 2.00±.05 E E 3 D D 2 5 C C NOTES: 1 SERIAL NO: THE APPLICABLE ARTICLE SHALL BE MARKED WITH A UNIQUE SERIAL NUMBER. INTERPRET B 2 ENTER DATE OF MANUFACTURE IN LOCATION SHOWN IN FORMAT MMYYYY. DIMENSIONS AND Aviation Communication & Surveillance Systems B TOLERANCES PER ASME Y14.5-2009 19810 North 7th Avenue Phoenix, Arizona 85027-4400 3 ENTER QR CODE IN LOCATION SHOWN. An L3Harris & Thales Company UNLESS OTHERWISE SPECIFIED, DIMENSIONS TITLE: 4. MATERIAL: BRADY LABEL, WHITE POLYESTER (B‐483) ADHESIVE BACKED, OR EQUIVALENT. ARE IN INCHES TOLERANCES: NGT‐9000D 5 WRAPPED TEXT IS PERMISSIBLE. ANGLES 2 PL DEC N/A N/A END ITEM LABEL 3 PL DEC N/A 6 TO CLAIM "MADE IN THE USA", FINAL ACCEPTANCE MUST BE PERFORMED IN THE UNITED STATES. DRAWING NO. REV THIRD ANGLE A 9029000‐20000 9029000‐20000 PROJECTION 9002040‐003 ‐ A NEXT ASSY END ITEM CAGE CODE: SHEET OF APPLICATION 1WYD3 1 1 8 7 6 5 4 3 2 1


Document Created: 2019-10-11 14:41:43
Document Modified: 2019-10-11 14:41:43
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC