2AC23-W7Z

FCC ID

Equipment: WIFI Module

Hui Zhou Gaoshengda Technology Co.,LTD -W7Z

NO.75 Zhongkai Development Area, Huizhou, Guangdong, N/A N/A China

Application
Frequency Range
Final Action Date
Granted
u3HgwDQGxkNjg9qflTyxdQ==
2412.0-2462.0
2018-12-26
APPROVED
u3HgwDQGxkNjg9qflTyxdQ==
2422.0-2452.0
2018-12-26
APPROVED
File NameDocument TypeDateDirect
Test ReportTest Report 2018-12-26 00:00:00 pdf
User ManualUsers Manual 2018-12-26 00:00:00 pdf
Setup PhotosTest Setup Photos 2018-12-26 00:00:00 pdf
Declaration Letter for RF ModuleCover Letter(s) 2018-12-26 00:00:00 pdf
RF Exposure Info.RF Exposure Info 2018-12-26 00:00:00 pdf
Label and Label LocationID Label/Location Info 2018-12-26 00:00:00 pdf
Internal PhotosInternal Photos 2018-12-26 00:00:00 pdf
External PhotosExternal Photos 2018-12-26 00:00:00 pdf
FCC Confidentiality Request LetterCover Letter(s) 2018-12-26 00:00:00 pdf
FCC Agent Auth LetterCover Letter(s) 2018-12-26 00:00:00 pdf
Block DiagramBlock Diagram N/A
Circuit diagramSchematics N/A
Operational DescriptionOperational Description N/A
Operational Description - Antenna Spec.Operational Description N/A

Application Details:

EquipmentWIFI Module
FRN0023889280
Grantee Code2AC23
Product Code-W7Z
Applicant BusinessHui Zhou Gaoshengda Technology Co.,LTD
Business AddressNO.75 Zhongkai Development Area , Huizhou, Guangdong,N/A China
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantHui Guan –
Applicant Phone
Applicant Fax+86-0752-2096698
Applicant Email[email protected]
Applicant MailStop
Test FirmUL Verification Services (Guangzhou) Co., Ltd.
Test Firm ContactStephen Guo
Test Firm Phone
Test Firm Fax
Test Firm Email[email protected]
Certified ByHui Guan – Manager
Comment [u3HgwDQGxkNjg9qflTyxdQ==]: Modular Approval. Listed output power is peak conducted. This device supports 802.11b and 802.11g with 20MHz Bandwidth. This device also supports 802.11n with 20 MHz and 40 MHz bandwidth. This module may be installed only by the OEM or an OEM integrator. This transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC