UM

FCC ID: 2ABV4-BKH928

Users Manual

Download: PDF
FCCID_4466413

User Manual BT&NC Headphone Model Name: BKH928 FCC ID:2ABV4—BKH928

IN THE BOX Brookstone Wireless Headphones Carrying Case CCC Brookstone airphones WIRELESS NOISE—CANCELLING HEADPHONES CCC 3.5mm Audio Cable USB Type—C Cable User Guide Airplane Adaptor







TOUCH CONTROL The headphones include a multifunc— tion touchpad located over the right Multifunction earcup. Use the following gestures to Touchpad control the audio playback and answer calls. Play/Pause: Tap twice. Next Track: Tap 3 times Previous Track: Tap 4 times. Volume: Slowly swipe up or down. Answer a Call: Double tap during an incoming call. Rejecting a Call: Touch and HOLD during an incom— ing call. Voice Assistant: sw /down t Touch . and . HOLD until the100. default wipe UP/Cown 10 change the volume voice assistant of your device is activated. You can touch and HOLD again to cancel (this may not be supported on all devices). Monitor: Place the palm of your hand over the right earcup, the music is muted until you release your palm from the earcup.

LED INDICATORS The headphones include two LED indicators, the Right LED indicator and the Left LED indicator. Both LED Indicators are explained below. RightLED Indicator Bluetooth Pairng Mode Flashes red and blue Connected Slowly fashes blue {every 5 seconds} Not Connected Quickly fashes blue (every second) ANC Noise Cancelling Solid green Ambient Sound Solid white Ambient Sound and or Noise Cancelling Off Battery Left LED Indlicator Charging Tharging Solld red Fully Charged


FCC INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: « Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. «Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. « Consult the dealer or an experienced radio/ TV technician for help Information Regarding Exposure to Radio Frequency Energy Your device is designed and manufactured not to exceed the emission limits for exposure to RF energy set by the Federal Communications Commission of the United States (FCC). Information on your Device is on file with the FCC and can be found under the Display Grant section of http://www.fee.gov/oet/ea/ after searching on the FCC ID for your Device, which can be found on the back of the Device. LITHIUM POLYMER BATTERY WARNINGS This device contains a non—removable Lithium— Polymer battery. The battery must be recycled or disposed of properly. Contact your local waste management office for information on battery recycling or disposal. 11

Rating Label Definitions Direct current symbol. This symbol signifies the product must not be discarded as household & © x waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. This symbol signifies and declares that this equipment has battery charging which complies with California CEC and energy efficiency. This symbol signifies that this is a wireless device powered by Bluetooth® technology. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., used under license. 12





Document Created: 2019-09-27 16:31:10
Document Modified: 2019-09-27 16:31:10
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC