Test report

FCC ID: 2ABQ6-A712

Test Report

Download: PDF
FCCID_2316626

                               Global United Technology Services Co., Ltd.

                                                                                       Report No.: GTSE14060099301




                                TEST REPORT
 Applicant:                            Inspira Technologies LLC
 Address of Applicant:                 6480 Weathers Place Suite 103 San Diego, CA 92121
                                       United States
 Equipment Under Test (EUT)

   Product Name:                       TABLET PC
   Model No.:                          A712
 FCC ID:                               2ABQ6-A712
 Applicable standards:                 FCC CFR Title 47 Part 15 Subpart B:2013

 Date of sample receipt:               June 16, 2014
 Date of Test:                         June 16-27, 2014
 Date of report issue:                 June 27, 2014
 Test Result :                         PASS *
* In the configuration tested, the EUT complied with the standards specified above.




 Authorized Signature:




   Robinson Lo
Laboratory Manager
This report details the results of the testing carried out on one sample. The results contained in this test report do not
relate to other samples of the same product and does not permit the use of the GTS product certification mark. The
manufacturer should ensure that all products in series production are in conformity with the product sample detailed in
this report.
This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other
than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any
mention of GTS or testing done by GTS in connection with, distribution or use of the product described in this report must
be approved by GTS in writing.
This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized
alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be
prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 90 days only.


                                                                                Report No.: GTSE14060099301

2 Version
    Version No.                        Date                                    Description
          00                      June 27, 2014                                  Original




Prepared By:                                                       Date:                June 27, 2014

                                     Project Engineer


Check By:                                                          Date:                June 27, 2014

                                          Reviewer




Global United Technology Services Co., Ltd.                                     Project No.: GTSE140600993RF
2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District,
Shenzhen, China 518102
Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960                                 Page 2 of 25


                                                                                                                 Report No.: GTSE14060099301

3 Contents
                                                                                                                                                          Page
1     COVER PAGE ........................................................................................................................................... 1

2     VERSION .................................................................................................................................................. 2

3     CONTENTS .............................................................................................................................................. 3

4     TEST SUMMARY ..................................................................................................................................... 4

5     GENERAL INFORMATION ...................................................................................................................... 5
    5.1       CLIENT INFORMATION.......................................................................................................................... 5
    5.2       GENERAL DESCRIPTION OF EUT ......................................................................................................... 5
    5.3       TEST MODE ....................................................................................................................................... 5
    5.4       TEST FACILITY .................................................................................................................................... 6
    5.5       TEST LOCATION .................................................................................................................................. 6
    5.6       DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 6
    5.7       DEVIATION FROM STANDARDS ............................................................................................................. 6
    5.8       ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................... 6
    5.9       OTHER INFORMATION REQUESTED BY THE CUSTOMER ......................................................................... 6
6     TEST INSTRUMENTS LIST ..................................................................................................................... 7

7     TEST RESULTS AND MEASUREMENT DATA...................................................................................... 8
    7.1       CONDUCTED EMISSIONS ..................................................................................................................... 8
    7.2       RADIATED EMISSION ......................................................................................................................... 11
8     TEST SETUP PHOTO ............................................................................................................................ 17

9     EUT CONSTRUCTIONAL DETAILS ..................................................................................................... 19




Global United Technology Services Co., Ltd.                                                                        Project No.: GTSE140600993RF
2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District,
Shenzhen, China 518102
Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960                                                                    Page 3 of 25


                                                                               Report No.: GTSE14060099301

4 Test Summary
                  Test Item                               Section in CFR 47                  Result
Conducted Emission                                             Part15.107                     PASS
Radiated Emissions                                             Part15.109                     PASS
PASS: The EUT complies with the essential requirements in the standard.




Global United Technology Services Co., Ltd.                                    Project No.: GTSE140600993RF
2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District,
Shenzhen, China 518102
Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960                           Page 4 of 25


                                                                                Report No.: GTSE14060099301

5 General Information

5.1 Client Information
      Applicant:                         Inspira Technologies LLC
      Address of Applicant:              6480 Weathers Place Suite 103 San Diego, CA 92121
                                         United States
      Manufacturer:                      Inspira Technologies LLC
      Address of Manufacturer:           6480 Weathers Place Suite 103 San Diego, CA 92121
                                         United States
      Factory:                           Shenzhen Iproda Technology Co., LTD
      Address of Factory:                4th-5th Floors ,C Building, wanfeng industrial zone, Tangwei Village,
                                         Gongming town, Guangming New District , Shenzhen , China

5.2 General Description of EUT
      Product Name:                      TABLET PC
      Model No.:                         A712
      Power supply:                      Model No.: SUN-0500150
                                         Input: AC 100-240V, 50/60Hz, 0.3A Max.
                                         Output: DC 5V, 1.5A
                                         DC 3.7V Lithium-ion Polymer Battery

5.3 Test mode
      Test mode:
      PC mode                            Keep the EUT in PC working mode
      Test voltage:
      AC 120V/60Hz




Global United Technology Services Co., Ltd.                                      Project No.: GTSE140600993RF
2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District,
Shenzhen, China 518102
Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960                              Page 5 of 25


                                                                                   Report No.: GTSE14060099301


5.4 Test Facility
      The test facility is recognized, certified, or accredited by the following organizations:
      ● CNAS —Registration No.: CNAS L5775
      CNAS has accredited Global United Technology Services Co., Ltd. To ISO/IEC 17025 General
      Requirements for the competence of testing and calibration laboratories (CNAS-CL01 Accreditation
      Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field
      of testing.
      ● FCC —Registration No.: 600491
      Global United Technology Services Co., Ltd., Shenzhen EMC Laboratory has been registered and
      fuly described in a report filed with the (FCC) Federal Communications Commission. The acceptance
      letter from the FCC is maintained in files. Registration 600491, June 28, 2013.
      ● Industry Canada (IC)
      The 3m Semi-anechoic chamber of Global United Technology Services Co., Ltd. Has been
      Registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing
      with Registration No.: 9079A-2, June 26, 2013.

5.5 Test Location
      All tests were performed at:
      Global United Technology Services Co., Ltd.
      Address: 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen,
      China
      Tel: 0755-27798480
      Fax: 0755-27798960

5.6 Description of Support Units
    Manufacturer              Description                 Model                Serial Number      FCC Approval
        HP                      Printer                  CB495A                  05257893             DoC
        Lenovo                  PC Host                  M6900                 EA05257893              DoC
         DELL                  MONITOR                  E178FPC                    N/A                 DoC
         DELL                 KEYBOARD                  SK-8115                    N/A                 DoC
         DELL                   MOUSE                   MOC5UO                     N/A                 DoC

5.7 Deviation from Standards
      Biconical, log.per. antenna and horn antenna were used instead of dipole antenna.
      Semi-anechoic Chamber was used as alternation of open air test sites, and all test suites were
      performed with radiated method in it.

5.8 Abnormalities from Standard Conditions
      None.

5.9 Other Information Requested by the Customer
      None.




Global United Technology Services Co., Ltd.                                         Project No.: GTSE140600993RF
2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District,
Shenzhen, China 518102
Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960                                 Page 6 of 25


                                                                                    Report No.: GTSE14060099301



6       Test Instruments list
Radiated Emission:
                                                                                                                 Cal.Due
                                                                                Inventory      Cal.Date
Item       Test Equipment            Manufacturer           Model No.                                             date
                                                                                   No.        (mm-dd-yy)
                                                                                                               (mm-dd-yy)
          3m Semi- Anechoic
 1                                ZhongYu Electron    9.0(L)*6.0(W)* 6.0(H)     GTS250       Mar. 28 2014 Mar. 27 2015
              Chamber
 2          Control Room          ZhongYu Electron    6.2(L)*2.5(W)* 2.4(H)     GTS251            N/A              N/A
 3      ESU EMI Test Receiver           R&S                  ESU26              GTS203        Jul. 06 2013     Jul. 05 2014
 4        BiConiLog Antenna       SCHWARZBECK              VULB9163             GTS214       Feb. 23 2014 Feb. 22 2015
       Double -ridged waveguide
 5                                SCHWARZBECK                 9120D             GTS208       June 28 2013 June 27 2014
                  horn
 6           RF Amplifier                HP                   8347A             GTS204        Jul. 06 2013     Jul. 05 2014
 7           Preamplifier                HP                   8349B             GTS206        Jul. 06 2013     Jul. 05 2014
 8        EMI Test Software            AUDIX                   E3                 N/A             N/A              N/A
 9          Coaxial cable               GTS                    N/A              GTS210        Jul. 06 2013     Jul. 05 2014
 10         Coaxial Cable               GTS                    N/A              GTS211        Jul. 06 2013     Jul. 05 2014
 11         Thermo meter                 N/A                   N/A              GTS256        Jul. 06 2013     Jul. 05 2014


Conducted Emission:
                                                                               Inventory      Cal.Date        Cal.Due date
Item       Test Equipment           Manufacturer           Model No.
                                                                                  No.        (mm-dd-yy)       (mm-dd-yy)
 1        Shielding Room          ZhongYu Electron   7.0(L)x3.0(W)x3.0(H)      GTS264       Sep. 07 2013     Sep. 06 2014
 2       EMI Test Receiver        Rohde & Schwarz          ESCS30              GTS223       Jul. 02 2013      Jul. 01 2014
 3       10dB Pulse Limita        Rohde & Schwarz             N/A              GTS224       Jul. 02 2013      Jul. 01 2014
 4         Coaxial Switch         ANRITSU CORP              MP59B              GTS225       Jul. 02 2013      Jul. 01 2014
                                 SCHWARZBECK
 5             LISN                                       NSLK 8127            GTS226       Jul. 02 2013      Jul. 01 2014
                                MESS-ELEKTRONIK
 6         Coaxial Cable               GTS                    N/A              GTS227       Jul. 02 2013      Jul. 01 2014
 7       EMI Test Software            AUDIX                   E3                 N/A            N/A               N/A


General used equipment:
                                                                               Inventory      Cal.Date        Cal.Due date
Item       Test Equipment           Manufacturer           Model No.
                                                                                  No.        (mm-dd-yy)       (mm-dd-yy)
 1           Barometer              ChangChun               DYM3               GTS257       July 09 2013      July 08 2014




Global United Technology Services Co., Ltd.                                            Project No.: GTSE140600993RF
2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District,
Shenzhen, China 518102
Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960                                    Page 7 of 25


                                                                                Report No.: GTSE14060099301



7 Test Results and Measurement Data
7.1 Conducted Emissions
      Test Requirement:                FCC Part15 B Section 15.107
      Test Method:                     ANSI C63.4:2003
      Test Frequency Range:            150KHz to 30MHz
      Class / Severity:                Class B
      Receiver setup:                  RBW=9KHz, VBW=30KHz, Sweep time=auto
      Limit:                                                                         Limit (dBuV)
                                          Frequency range (MHz)
                                                                          Quasi-peak              Average
                                                 0.15-0.5                   66 to 56*             56 to 46*
                                                  0.5-5                         56                   46
                                                   5-30                         60                   50
                                       * Decreases with the logarithm of the frequency.
      Test setup:




      Test procedure:                  1. The E.U.T and simulators are connected to the main power through a
                                          line impedance stabilization network (L.I.S.N.). This provides a
                                          50ohm/50uH coupling impedance for the measuring equipment.
                                       2. The peripheral devices are also connected to the main power through a
                                          LISN that provides a 50ohm/50uH coupling impedance with 50ohm
                                          termination. (Please refer to the block diagram of the test setup and
                                          photographs).
                                       3. Both sides of A.C. line are checked for maximum conducted
                                          interference. In order to find the maximum emission, the relative
                                          positions of equipment and all of the interface cables must be changed
                                          according to ANSI C63.4: 2003 on conducted measurement.
      Test Instruments:                Refer to section 6 for details
      Test mode:                       Refer to section 5.3 for details
      Test results:                    Pass




Global United Technology Services Co., Ltd.                                      Project No.: GTSE140600993RF
2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District,
Shenzhen, China 518102
Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960                              Page 8 of 25


                                                                               Report No.: GTSE14060099301
Measurement Data
Line:




Global United Technology Services Co., Ltd.                                    Project No.: GTSE140600993RF
2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District,
Shenzhen, China 518102
Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960                           Page 9 of 25


                                                                                    Report No.: GTSE14060099301


Neutral:




Notes:
1. An initial pre-scan was performed on the line and neutral lines with peak detector.
2. Quasi-Peak and Average measurement were performed at the frequencies with maximized peak emission.
3. Final Level =Receiver Read level + LISN Factor + Cable Loss
4. If the average limit is met when using a quasi-peak detector receiver, the EUT shall be deemed to meet both limits
      and measurement with the average detector receiver is unnecessary.




Global United Technology Services Co., Ltd.                                           Project No.: GTSE140600993RF
2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District,
Shenzhen, China 518102
Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960                                   Page 10 of 25


                                                                                      Report No.: GTSE14060099301



7.2 Radiated Emission
      Test Requirement:                FCC Part15 B Section 15.109
      Test Method:                     ANSI C63.4:2003
      Test Frequency Range:            30MHz to 6GHz
      Test site:                       Measurement Distance: 3m (Semi-Anechoic Chamber)
      Receiver setup:
                                         Frequency         Detector         RBW           VBW         Remark
                                          30MHz-          Quasi-peak       120kHz        300kHz   Quasi-peak Value
                                           1GHz
                                                             Peak              1MHz      3MHz        Peak Value
                                        Above 1GHz
                                                             Peak              1MHz      10Hz       Average Value
      Limit:
                                                Frequency               Limit (dBuV/m @3m)             Remark
                                              30MHz-88MHz                        40.00            Quasi-peak Value
                                             88MHz-216MHz                        43.50            Quasi-peak Value
                                            216MHz-960MHz                        46.00            Quasi-peak Value
                                              960MHz-1GHz                        54.00            Quasi-peak Value
                                                                                 54.00              Average Value
                                               Above 1GHz
                                                                                 74.00               Peak Value

      Test Procedure:                  1. The EUT was placed on the top of a rotating table 0.8 meters above the
                                          ground at a 3 meter camber. The table was rotated 360 degrees to
                                          determine the position of the highest radiation.
                                       2. The EUT was set 3 meters away from the interference-receiving
                                          antenna, which was mounted on the top of a variable-height antenna
                                          tower.
                                       3. The antenna height is varied from one meter to four meters above the
                                          ground to determine the maximum value of the field strength. Both
                                          horizontal and vertical polarizations of the antenna are set to make the
                                          measurement.
                                       4. For each suspected emission, the EUT was arranged to its worst case
                                          and then the antenna was tuned to heights from 1 meter to 4 meters
                                          and the rota table was turned from 0 degrees to 360 degrees to find the
                                          maximum reading.
                                       5. The test-receiver system was set to Peak Detect Function and Specified
                                          Bandwidth with Maximum Hold Mode.
                                       6. If the emission level of the EUT in peak mode was 10dB lower than the
                                          limit specified, then testing could be stopped and the peak values of the
                                          EUT would be reported. Otherwise the emissions that did not have
                                          10dB margin would be re-tested one by one using peak, quasi-peak or
                                          average method as specified and then reported in a data sheet.
      Test setup:                      Below 1GHz



Global United Technology Services Co., Ltd.                                           Project No.: GTSE140600993RF
2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District,
Shenzhen, China 518102
Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960                                 Page 11 of 25


                                                                                Report No.: GTSE14060099301




                                       Above 1GHz




      Test environment:                Temp.:       25 C         Humid.:      52%       Press.:   1 012mbar
       Measurement Record:                                                               Uncertainty:  4.5dB
      Test Instruments:                Refer to section 6 for details
      Test mode:                       Refer to section 5.3 for details
      Test results:                    Pass


Note:
The field strength is calculated by adding the Antenna Factor, Cable Factor & Preamplifier. The basic
equation with a sample calculation is as follows:

Final Test Level =Receiver Reading + Antenna Factor + Cable Factor – Preamplifier Factor




Global United Technology Services Co., Ltd.                                      Project No.: GTSE140600993RF
2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District,
Shenzhen, China 518102
Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960                            Page 12 of 25


                                                                               Report No.: GTSE14060099301
Measurement Data
Below 1GHz
Horizontal:




Global United Technology Services Co., Ltd.                                    Project No.: GTSE140600993RF
2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District,
Shenzhen, China 518102
Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960                          Page 13 of 25


                                                                               Report No.: GTSE14060099301


Vertical:




Global United Technology Services Co., Ltd.                                    Project No.: GTSE140600993RF
2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District,
Shenzhen, China 518102
Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960                          Page 14 of 25


                                                                               Report No.: GTSE14060099301
Above 1GHz
Horizontal:




Global United Technology Services Co., Ltd.                                    Project No.: GTSE140600993RF
2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District,
Shenzhen, China 518102
Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960                          Page 15 of 25


                                                                               Report No.: GTSE14060099301


Vertical:




Global United Technology Services Co., Ltd.                                    Project No.: GTSE140600993RF
2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District,
Shenzhen, China 518102
Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960                          Page 16 of 25


                                                                               Report No.: GTSE14060099301



8 Test Setup Photo
      Radiated Emission




Global United Technology Services Co., Ltd.                                    Project No.: GTSE140600993RF
2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District,
Shenzhen, China 518102
Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960                          Page 17 of 25


                                                                               Report No.: GTSE14060099301




      Conducted Emission




Global United Technology Services Co., Ltd.                                    Project No.: GTSE140600993RF
2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District,
Shenzhen, China 518102
Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960                          Page 18 of 25


                                                                               Report No.: GTSE14060099301



9 EUT Constructional Details




Global United Technology Services Co., Ltd.                                    Project No.: GTSE140600993RF
2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District,
Shenzhen, China 518102
Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960                          Page 19 of 25


                                                                               Report No.: GTSE14060099301




Global United Technology Services Co., Ltd.                                    Project No.: GTSE140600993RF
2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District,
Shenzhen, China 518102
Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960                          Page 20 of 25


                                                                               Report No.: GTSE14060099301




Global United Technology Services Co., Ltd.                                    Project No.: GTSE140600993RF
2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District,
Shenzhen, China 518102
Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960                          Page 21 of 25


                                                                               Report No.: GTSE14060099301




Global United Technology Services Co., Ltd.                                    Project No.: GTSE140600993RF
2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District,
Shenzhen, China 518102
Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960                          Page 22 of 25


                                                                               Report No.: GTSE14060099301




Global United Technology Services Co., Ltd.                                    Project No.: GTSE140600993RF
2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District,
Shenzhen, China 518102
Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960                          Page 23 of 25


                                                                               Report No.: GTSE14060099301




Global United Technology Services Co., Ltd.                                    Project No.: GTSE140600993RF
2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District,
Shenzhen, China 518102
Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960                          Page 24 of 25


                                                                               Report No.: GTSE14060099301




                                                    ------ End------




Global United Technology Services Co., Ltd.                                    Project No.: GTSE140600993RF
2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District,
Shenzhen, China 518102
Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960                          Page 25 of 25



Document Created: 2014-07-04 11:32:30
Document Modified: 2014-07-04 11:32:30

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC