Users Manual

FCC ID: 2AANZHY-TIMBRE

Users Manual

Download: PDF
FCCID_2739775

y~ * * ~ y~ ~ o (~ _ O O O O (~ _ Thank you for purchasing the Disco Bluetooth® Do not expose batferies, battery pack, or batteries to CHARGING THE SPEAKER 7. If paiting is unsuccessful, tum off the speaker first and CARE AND MAINTENANCE WARRANTY INFORMATION obligation in the event of marginal differences Please observe the following when sending the This equipment has been tested and Note: The manufacturer is not Speaker. Please read all insfructions carefully before installed to excessive heat, such as direct sunlight, or The speaker comes with a built—in rechargeable battery. repair following the aforementioned steps. Once you * Do not expose the speaker to liquid, moisture, or The condition of this warranty and our responsibities compared to the target appearance and workman— product: found to comply with the limits for a responsible for any radio or TV using and retain this manual for future use and open flame. Before using it for the first time, we recommend you have paired the speaker with a device, the earphones humidity to avoid damage to the product‘s infermal under this warranty are as follows: ship provided these have a negligible effect on the 1) Send the product sultably packaged with cartage Class B digital device, pursuant to part interference caused by unauthorized reference. charge the battery fully. Only use the supplied USB cable will remember this device and will poir automatically circuitry. product‘s fitmess for use, in the event of damage and insurance paid. Do not enclose any accessories to charge the speaker. when the device‘s Bluetooth® is activated and in range. * Do not use abrasive cleaning solvents to clean the unit. Supplier‘s warranty is non—transferable. And this warranty is caused by chemical or electrochemical effects, by with the product (cables, chargers, manuals, efc.) 15 of FCC Rules. These limits are modifications to this equipment. such PACKAGE CONTENTS You do not need to re—pair any previously connected * Do not expose the headset to extremely high or low limited to the original purchaser only. watter or generally from abnormal condiitions. unless the Hype® Service Center specifies otherwise. designed to provide reasonable modifications could void the user‘s * Disco Bluetooth® Speaker Connect the USB cable to a computer USB port and the devices. temperaitures as this will shorten the life of the electronic 3) The warranty will be performed in such a way that 2) Mark the RMA number on the outside of the protection against harmful interference authority to operate this equipment. * USB Charging Cable Micro USB plug to the charging jack of the Unit. The red cevice, destroy the battery, and/or distort certain plastic * You must be able to prove the date of original purchase we shall decide whether to repair the defective parts package in such a way thatit is visible and clearly in a residential installation. This * 3.5mm AUX Cable LED light will fluminate while the speakers are charging. legible. Any Changes or modifications not LISTENING TO MUSIC parts. of the unit with a dated receipt. or to replace them with working parts free of charge. equipment generates and can radiate * Operation Manual Once the speaker is poired to your device, you can * Do not dispose of the speaker in fire as they may * The warranty is not applicable if the product has been Hype® reservesthe right to exchange the product for a 3) You must enclose a copy of the sales slip as proof of expressly approved by the party radio frequency energy and, if not A full charge of the battery takes up to 3 hours. When the stream music wirelessly to the speakers. Select the frack explode or combust. subject to physical abuse, improperinstallation, modifica— replacement product of equal value if the product purchase. responsible for compliance could void installed and used in accordance with KEY FEATURES battery is fuly charged the red LED will tum off. you wish to listen to on your device to listen via speaker. * Do not expose the speaker to contact with sharp tion or repair by unauthorized third parrty. sent in cannot be repaired within a reasonable time or 4) Once Hype® has received the product, it will meet its the user‘s authority to operate the * Creates a kaleidoscope effect Disconnect the speakers at this point. The speakers will Should you encounter any problems while streaming, objects as this will cause scratches and damage. * The responsibility of supplier‘s products shaill be limited to at a reasonable cost. Requests cannot be made for warranty obligations in accordance with the warranty the instructions, may cause harmful * Lights project while you play your music then be ready for use. * Do not let the speaker fall from high places, as doing so interference to radio communications. equipment. please refer to your device‘s user manual. the repair of replacement of the product as its sole repairs to be carried out on site. Parts that have been conditions and will return the product to the sender * Built—in rechargeable battery may damage the intemal circuitry. cliscretion. replaced or exchanged become our property. with carrage and insurance paid. However, there is no guarantee that * Media & volume controls TURNING SPEAKERS ON/OFF USING A 3.5MM AUX CABLE * Do not attempt to disassemble the speaker * Specifically exempt from any warranty are limitecHife 4) The warranty claim does not apply if repairs or other interference will not occur in a This device is measured RF output Power On: Move the power switch into the ON position 1. Using the included 3.5mm AUX cable, connect one consumaible components subject to normal wear and work is carried out by unauthorized persons orif our Service outside of warranty particular installation. If this equipment power is less than the SAR exclusion SAFETY INSTRUCTIONS depending how you are using it. end of the cable into the speakers 3.5mm AUX input. In the event that the speaker do not function property, tearsuch as batteries, decorates and other accessories. products are equipped with additional parts or Hype® can refuse any service claim made that is not does cause harmful interference to threshold value for human head and Keep the unit away from heat sources, direct sunlight, 2. Connect the other end into the 3.5mm input of the retum it to the store where it was purchased. * A supplier will not take any responsibility if the failure of accessorles that are not approved for our product. covered by the warranty. radio or television reception, which can body . Therefore, SAR test is not humidity, watter and any otherliquids. Power Off: Move the powerswitch into the OFF position. cevice you wish to play music from. the unit hasresulted from accident, abuse, misuse, or any 5) Warranties that have been activated do not cause 3. Move the power switch into the ON position. SPECIFICATIONS unauthorized repair, modiffication or disassemble. the warranty period to be extended, nor do they If Hype® agrees to provide a service outside the be determined by turning the necessary. Do not operate the unit if it has been exposed to water, PAIRING THE SPEAKERS 4. In order to use with aux cable, you need to hold down Bluetooth®: V2.1 * Modiffication and repair of the unit should be done by trigger a new warranty perlod. The warranty period for warranty, the customer will be invoiced for all repair equipment off and on, the user is moisture or any otherliquids to prevent against electric 1. Ensure the speakeris tumed off. If they are not, please the M button on the front of the speaker to switch to AUX Sensitivity: 750B authorized and qualified service personnel, Center or any replacement parts installed ends with the warranty and fransport costs. Hype® will not accept any encouraged to try to correct the shock, explosion and/or injury to yourself and damage to tum off the speaker first before pairing. mode firstly. Frequency: 180Hz~20kHz returned to the manufacturer. period for the entire product. packages that have not first been approved by Hype® interference by one or more of the the unit. 2. Move the power switch into the ON position and the 5. Begin playing music from your connected device, Operating Distance: Up to 33f (10m) * This warranty gives you specific legal rights, and you 6) Any other further claims are excluded, especially by means of an RMIA (Return Material Authorizattion). following measures: device will then beep. This will indicate your speaker is media buttons on speaker may not work in this mode. Play Time: Up to 1.5 Hours may also have otherrights which vary underlocal laws. those for replacement due to damage caused to the Contact us with questions at: Do not use the unit if it has been dropped or damaged in now in pairing mode. In AUX Mode, the M button will work after pressing play Speaker Power: 3W x 2 outside of the product, provided there is no obligatory Support@dglusa.com ——Reorient or relocate the receiving any way. 3. Place the speaker and the Bluetooth® device to which button on your device. Battery: Built—in Rechargeable The following conditions comprise the requirements legalliability. antenna. you would like to pair it within the operating distance. We 3.7V, 800mAh and scope of our warranty conditions and do not ——Increase the separation between the Repairs to electrical equipment should only be recommend keeping the two devices no further than 33 MANUAL KEY FUNCTIONS Charging Time: Up to 3 Hours affect our legal and contractual warranty obligations. We therefore accept no liability for accidental, indirect equipment and receiver. performed by a qualified electrician. Improper repairs feet apart. The speakeris equipped with a few shortcut keys. We offer a warranty on our products in accordance or other consequential damage of any kind, which ——Connect the equipment into an outlet may place the user at serious risk. 4. Once you have activated Bluetooth® on your device, Please note the following functions. with the following conditions: leads to usage restrictions, data loss, and loss of on a circuit different from that to select "HY—TIMBRE" from the list of available Bluetooth® 1. Increase Volume — Press hold the " ¥+/pm" button 1) Hype® products are covered by a 12 month eamings or interruption to business. Do not puncture or harm the exterior surface of the devices. 2. Decrease Volume — Press and hold the "W@/ V— " button warranty. We will resolve cdamages or defects on Hype® which the receiver is connected. product in any way. 5. Ensure Bluetooth® is enabled on your phone or music 3. Play/Pause — Press M/IMi button products free of charge within 12 months of the Asserting a warranty claim: —Consult the dealer or an experienced device. Refer to the manufacturer‘s instructions for how 4. Previous Track — Press the "W@/ V—" button purchase date under the following warranty 1) To make use of the warranty service for hardware radio/TV technician for help. Keep the unit free from dust, lint, etc. FEATURES/PARTS to enable Bluetooth® on your device. 5. Next Track — Press the "W+/pM " button conditions. For any damage or defect determined issues, you must contact the Hype® Service Center by This device complies with Part 15 of 1. Call/Play/Pause 6. Answering/Ending a call— press M/lM¥ll button later than 12 months affer the purchase date, proof of email at support@dglusa.com FCC Rules. Operation is subject to the Do not use this unit for anything other than its intended 2. Previous Song/Volume Decrease a manufacturing fault must be submitted for repoir 2) Hype® will try to diagnose and solve your problem. If following two conditions: (1)This use or purpose. Doing so may damage the device. 3. Next Song/ Volume Increase SWITCH LED LIGHTS under warranty. it is determined that a warranty claim exists, you will be 4. LED Mode/LED Power 1. Press the LED to cycle through different LED modes. 2) The warranty does not cover batteries and other given an RMA number(Refurn Material Authorization) device may not cause harmful DISCO This product is not a toy. Keep out of reach of children. 5. Micro USB Charge Port The LED lights will not react to music in every mode. parts, which are considered consumables, parts that and will be asked to send the product to Hype®. interference, and (2)This device must Operation Manual HY—TIMBRE 6. AUX Input 2. To turnoff the lights press and hold the LED button. break easily such as glass or plastic or defects based accept any interference received, Do not use the speaker at excessive levels as this may 7. OFF/ON Switch 3. To turn the lights back on, press and hold the on normal wear and tear. There is no warranty IMPORTANT: Hype® will only accept parcels that have including interference that may cause FCC ID: 2AANZHY—TIMBRE damage hearing. 8. Mic LED button. an RMA number. undesired operation. BT ID: BO20865 \ / \ */ *) \ J \ P \e \ \—


Document Created: 2015-09-02 12:48:37
Document Modified: 2015-09-02 12:48:37
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC