MPE

FCC ID: 2AAAS-CE03

RF Exposure Info

Download: PDF
FCCID_2551897

EMC Test Data Client: Vivint Wireless Job Number: J96091 T-Log Number: T96173 Model: 1520 (4x4 5GHz 802.11 Client) Project Manager: Irene Rademacher Contact: Venkat Kalkunte Project Coordinator: - Standard: FCC 15.B / 15.407 (New Rules) Class: N/A Maximum Permissible Exposure Test Specific Details The objective of this test session is to perform final qualification testing of the EUT with respect to the Objective: specification listed above. Date of Test: 2/17/2015 Test Engineer: Mark Hill General Test Configuration Calculation uses the free space transmission formula: S = (PG)/(4 πd2) Where: S is power density (W/m2), P is output power (W), G is antenna gain relative to isotropic, d is separation distance from the transmitting antenna (m). Summary of Results Device complies with Power Density requirements at 20cm Yes ti separation: Use: General Antenna: 6dBi 4x4 antenna, 9dBi effective gain Using worse case channel/mode from each band EUT Cable Loss Ant Power Power Density (S) MPE Limit Freq. Power Loss Gain at Ant EIRP at 20 cm at 20 cm MHz dBm mW* dB dBi dBm mW mW/cm^2 mW/cm^2 5230 20.7 117.5 0 9 20.7 933.25 0.186 1.000 5270 20.9 123.0 0 9 20.9 977.24 0.194 1.000 5710 21.2 132.1 0 9 21.2 1049.31 0.209 1.000 5795 24.1 257.0 0 9 24.1 2041.74 0.406 1.000 Note: For channels that span 5725MHz, the measured power in the UNII2c and UNII3 was summed, as this would be worse case from an RF exposure perspective. T96173 (1520_FCC) MPE Calc Page 1 of 1


Document Created: 2015-03-03 14:00:41
Document Modified: 2015-03-03 14:00:41
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC