Test report

FCC ID: 2AA2U-BS616

Test Report

Download: PDF
FCCID_3121391

Report Number: 68.930.16.020.01 FCC - TEST REPORT Report Number : 68.930.16.020.01 Date of Issue: August 10, 2016 Model : BS616 Product Type : Smart body scale(HiMirror) Applicant : Cal-Comp Electronics & Communications Company Limited Address : 3th FL., No. 99, Sec. 5, Nanjing E. Rd. Taipei, Taiwan 105 Production Facility : Zhongshan Lifesense Electronics Co.,Ltd Address : No.23 Jin’an Road, Minzhong, 528441 Zhongshan, Guangdong, China 528437 Test Result :  Positive  Negative Total pages including Appendices : 29 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch is a subcontractor to TÜV SÜD Product Service GmbH according to the principles outlined in ISO 17025. TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch reports apply only to the specific samples tested under stated test conditions. Construction of the actual test samples has been documented. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. The manufacturer/importer is responsible to the Competent Authorities in Europe for any modifications made to the production units which result in non-compliance to the relevant regulations. TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch shall have no liability for any deductions, inferences or generalizations drawn by the client or others from TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch issued reports. This report is the confidential property of the client. As a mutual protection to our clients, the public and ourselves, extracts from the test report shall not be reproduced except in full without our written approval EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 1 of 29 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.16.020.01 1 Table of Contents 1 Table of Contents ................................................................................................................................................................... 2 2 Details about the Test Laboratory .......................................................................................................................................... 3 3 Description of the Equipment Under Test ............................................................................................................................. 4 4 Summary of Test Standards ................................................................................................................................................... 5 5 Summary of Test Results ....................................................................................................................................................... 6 6 General Remarks.................................................................................................................................................................... 7 7 Test Setups ............................................................................................................................................................................. 8 8 Systems test configuration ..................................................................................................................................................... 9 9 Technical Requirement ........................................................................................................................................................ 10 9.1 Conducted Emission.................................................................................................................................................... 10 9.2 Conducted peak output power ..................................................................................................................................... 13 9.3 Power spectral density................................................................................................................................................. 15 9.4 6 dB Bandwidth and 99% Occupied Bandwidth ......................................................................................................... 17 9.5 Spurious RF conducted emissions ............................................................................................................................... 19 9.6 Band edge testing ........................................................................................................................................................ 23 9.7 Spurious radiated emissions for transmitter ................................................................................................................ 25 10 Test Equipment List ............................................................................................................................................................. 28 11 System Measurement Uncertainty ....................................................................................................................................... 29 EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 2 of 29 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.16.020.01 2 Details about the Test Laboratory Details about the Test Laboratory Test Site 1 Company name: TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China IC Registration 10320A -1 No.: FCC Registration 502708 No.: Telephone: 86 755 8828 6998 Fax: 86 755 8828 5299 EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 3 of 29 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.16.020.01 3 Description of the Equipment Under Test Product: Smart body scale(HiMirror) Model no.: BS616 FCC ID: 2AA2U-BS616 Options and accessories: Nil Rating: 3.7VDC,3000mAh (Supplied by internal lithium battery) or a separate approved AC/DC adaptor) AC/DC adaptor (M/N: EM1005AHUS-050) with following ratings: Input: 100-240VAC, 50-60Hz, 0.6-0.3A; Output: 5.0VDC, 1.2A RF Transmission 2402MHz-2480MHz Frequency: No. of Operated Channel: 40 Modulation: GFSK Antenna Type: Integrated antenna Antenna Gain: 0dBi Description of the EUT: The Equipment Under Test (EUT) is Smart body scale(HiMirror) operated at 2.4GHz EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 4 of 29 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.16.020.01 4 Summary of Test Standards Test Standards FCC Part 15 Subpart C PART 15 - RADIO FREQUENCY DEVICES 10-1-2015 Edition Subpart C - Intentional Radiators All the test methods were according to FCC KDB 558074 DTS Meas Guidance and ANSI C63.10-2013. EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 5 of 29 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.16.020.01 5 Summary of Test Results Technical Requirements FCC Part 15 Subpart C Test Condition Pages Test Result §15.207 Conducted emission AC power port 10 Pass §15.247(b)(1) Conducted peak output power 13 Pass §15.247(e) Power spectral density* 15 Pass §15.247(a)(2) 6dB bandwidth 17 Pass §15.247(a)(1) 20dB bandwidth and 99% Occupied -- N/A Bandwidth §15.247(a)(1) Carrier frequency separation -- N/A §15.247(a)(1)(iii) Number of hopping frequencies -- N/A §15.247(a)(1)(iii) Dwell Time -- N/A §15.247(d) Spurious RF conducted emissions 19 Pass §15.247(d) Band edge 23 Pass §15.247(d) & Spurious radiated emissions for 25 Pass §15.209 & transmitter and receiver §15.203 Antenna requirement See note 1 Pass Note 1: N/A=Not Applicable. Note 2: The EUT uses an integrated antenna, which gain is 0dBi. In accordance to §15.203, it is considered sufficiently to comply with the provisions of this section. EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 6 of 29 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.16.020.01 6 General Remarks Remarks This submittal(s) (test report) is intended for FCC ID: 2AA2U-BS616 complies with Section 15.205, 15.209, 15.247 of the FCC Part 15, Subpart C. This report is for the BT 4.0 part. SUMMARY: All tests according to the regulations cited on page 5 were  - Performed  - Not Performed The Equipment Under Test  - Fulfills the general approval requirements.  - Does not fulfill the general approval requirements. Sample Received Date: July 25, 2016 Testing Start Date: July 25, 2016 Testing End Date: July 27, 2016 - TÜV SÜD CERTIFICATION AND TESTING (CHINA) CO., LTD. SHENZHEN BRANCH - Reviewed by: Prepared by: _______________________ _______________________ Phoebe Hu Aaron Lai EMC Project Manager EMC Project Engineer EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 7 of 29 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.16.020.01 7 Test Setups 7.1 Radiated test setups Below 1GHz Above 1GHz 7.2 Conducted RF test setups Measuring EUT Receiver 7.3 AC Power Line Conducted Emission test setups EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 8 of 29 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.16.020.01 8 Systems test configuration Auxiliary Equipment Used during Test: DESCRIPTION MANUFACTURER MODEL NO.(SHIELD) S/N(LENGTH) PC Lenovo X220 --- Test software: NFgo_Studio, which used to control the EUT in, continues transmitting mode EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 9 of 29 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.16.020.01 9 Technical Requirement 9.1 Conducted Emission Test Method 1. The EUT was placed on a table, which is 0.8m above ground plane 2. The power line of the EUT is connected to the AC mains through a Artificial Mains Network (A.M.N.). 3. Maximum procedure was performed to ensure EUT compliance 4. A EMI test receiver is used to test the emissions from both sides of AC line Limit Frequency QP Limit AV Limit MHz dBμV dBμV 0.150-0.500 66-56* 56-46* 0.500-5 56 46 5-30 60 50 EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 10 of 29 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.16.020.01 Conducted Emission EUT: Smart body scale(HiMirror) M/N: BS616 Operating Condition: TX + Charging Test Specification: Power Line, L Comment: AC120V/60Hz 100 90 80 70 60 Level in dBµV 50 40 30 20 10 0 150k 3 0 0 4 0 05 0 0 8 0 01 M 2M 3M 4M 5M 6 8 10M 20M 30M Fre q u e n c y in H z Frequency QuasiPeak Average Limit Margin Line (MHz) (dBµV) (dBµV) (dBµV) (dB) 0.393500 --- 33.11 47.99 14.88 L1 0.393500 47.24 --- 57.99 10.75 L1 0.421500 --- 40.08 47.42 7.34 L1 0.421500 47.92 --- 57.42 9.50 L1 21.753500 --- 26.91 50.00 23.09 L1 21.753500 41.64 --- 60.00 18.36 L1 EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 11 of 29 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.16.020.01 Conducted Emission EUT: Smart body scale(HiMirror) M/N: BS616 Operating Condition: TX + Charging Test Specification: Power Line, N Comment: AC120V/60Hz 100 90 80 70 60 Level in dBµV 50 40 30 20 10 0 150k 3 0 0 4 0 05 0 0 8 0 01 M 2M 3M 4M 5M 6 8 10M 20M 30M Fre q u e n c y in H z Frequency QuasiPeak Average Limit Margin Line (MHz) (dBµV) (dBµV) (dBµV) (dB) 0.341500 --- 38.45 49.17 10.72 N 0.341500 53.04 --- 59.17 6.13 N 0.398500 --- 36.50 47.88 11.38 N 0.398500 54.04 --- 57.88 3.84 N 0.421500 --- 42.06 47.42 5.36 N 0.421500 54.10 --- 57.42 3.32 N 0.765500 --- 35.63 46.00 10.37 N 0.765500 48.49 --- 56.00 7.51 N 1.101500 --- 30.62 46.00 15.38 N 1.101500 44.19 --- 56.00 11.81 N EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 12 of 29 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.16.020.01 9.2 Conducted peak output power Test Method 1. Use the following spectrum analyzer settings: Span = approximately 5 times the 20 dB bandwidth, centered on a hopping channel RBW > the 20 dB bandwidth of the emission being measured, VBW≥RBW, Sweep = auto, Detector function = peak, Trace = max hold 2. Add a correction factor to the display. 3. Allow the trace to stabilize. Use the marker-to-peak function to set the marker to the peak of the emission. The indicated level is the peak output power Limits Frequency Range Limit Limit MHz W dBm 2400-2483.5 ≤1 ≤30 Conducted peak output power BT 4.0 Bluetooth Mode GFSK modulation Test Result Conducted Peak Frequency Output Power Result MHz dBm Low channel 2402MHz -7.27 Pass Middle channel 2440MHz -6.45 Pass High channel 2480MHz -6.57 Pass Low channel 2402MHz EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 13 of 29 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.16.020.01 Middle channel 2440MHz High channel 2480MHz EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 14 of 29 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.16.020.01 9.3 Power spectral density Test Method This procedure shall be used if maximum peak conducted output power was used to demonstrate compliance: 1. Set analyzer center frequency to DTS channel center frequency. RBW=3kHz,VBW≥3RBW,Span=1.5 times DTS bandwidth, Detector=Peak, Sweep=auto, Trace= max hold 2. Allow trace to fully stabilize, use the peak marker function to determine the maximum amplitude level within the RBW . 3. Repeat above procedures until other frequencies measured were completed Limit Limit [dBm] ≤8 BT 4.0 Bluetooth Mode GFSK modulation Test Result Frequency Power spectral Limit Result MHz density dBm 2402 -19.91 8 Pass 2440 -19.40 8 Pass 2480 -20.14 8 Pass EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 15 of 29 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.16.020.01 EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 16 of 29 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.16.020.01 9.4 6 dB Bandwidth and 99% Occupied Bandwidth Test Method 1. Use the following spectrum analyzer settings: RBW=100K, VBW≥3RBW, Sweep = auto, Detector function = peak, Trace = max hold 2. Use the automatic bandwidth measurement capability of an instrument, may be employed using the X dB bandwidth mode with X set to 6 dB, care shall be taken so that the bandwidth measurement is not influenced by any intermediate power nulls in the fundamental emission that might be ≥ 6 dB. 3. Allow the trace to stabilize, record the X dB Bandwidth value. Limit Limit [kHz] ≥500 BT 4.0 Bluetooth Mode GFSK modulation Test Result Frequency 6 dB Bandwidth 99%Bandwidth Limit Result MHz kHz kHz kHz 2402 629.50 1180.89 500 Pass 2440 633.90 1532.56 500 Pass 2480 633.90 1532.56 500 Pass Low channel 2402MHz EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 17 of 29 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.16.020.01 6 dB Bandwidth Middle channel 2440MHz High channel 2480MHz EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 18 of 29 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.16.020.01 9.5 Spurious RF conducted emissions Test Method 1. Use the following spectrum analyzer settings: Span = wide enough to capture the peak level of the in-band emission and all spurious emissions (e.g., harmonics) from the lowest frequency generated in the EUT up through the 10th harmonic. Typically, several plots are required to cover this entire span. RBW = 100 kHz, VBW≥RBW, Sweep = auto, Detector function = peak, Trace = max hold 2. Allow the trace to stabilize. Set the marker on the peak of any spurious emission recorded. 3. The level displayed must comply with the limit specified in this Section. Submit these plots. 4. Repeat above procedures until all frequencies measured were complete. Limit Frequency Range Limit (dBc) MHz 30-25000 -20 EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 19 of 29 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.16.020.01 Spurious RF conducted emissions BT4.0 GFSK Modulation: 2402MHz 30MHz – 1GHz 1GHz – 25GHz EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 20 of 29 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.16.020.01 2440MHz 30MHz – 1GHz 1GHz – 25GHz EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 21 of 29 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.16.020.01 2480MHz 30MHz – 1GHz 1GHz – 25GHz EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 22 of 29 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.16.020.01 9.6 Band edge testing Test Method 1 Use the following spectrum analyzer settings: Span = wide enough to capture the peak level of the in-band emission and all spurious RBW = 100 kHz, VBW≥RBW, Sweep = auto, Detector function = peak, Trace = max hold 2 Allow the trace to stabilize, use the peak and delta measurement to record the result. 3 The level displayed must comply with the limit specified in this Section. . 4 Repeat the test at the hopping off and hopping on mode, submit all the plots. Limit: In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated device is operating, the RF power that is produced shall be at least 20 dB below that in the100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided that the transmitter demonstrates compliance with the peak conducted power limits. EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 23 of 29 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.16.020.01 Band edge testing BT4.0 GFSK Modulation Test Result EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 24 of 29 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.16.020.01 9.7 Spurious radiated emissions for transmitter Test Method 1: The EUT was place on a turn table which is 1.5m above ground plane for above 1GHz and 0.8m above ground for below 1GHz at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. 2: The EUT was set 3 meters away from the interference – receiving antenna, which was mounted on the top of a variable – height antenna tower. 3: The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. 4: For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. 5: Use the following spectrum analyzer settings According to C63.10: For Above 1GHz Span = wide enough to capture the peak level of the in-band emission and all spurious RBW = 1MHz, VBW≥RBW for peak measurement and VBW = 10Hz for average measurement, Sweep = auto, Detector function = peak, Trace = max hold. For Below 1GHz Use the following spectrum analyzer settings: Span = wide enough to capture the peak level of the in-band emission and all spurious RBW = 100 KHz, VBW≥RBW for peak measurement, Sweep = auto, Detector function = peak, Trace = max hold. Note: 1: The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120 KHz for Quasi-peak detection (QP) at frequency below 1GHz. 2: The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is 3MHz for peak detection (PK) at frequency above 1GHz. 3: The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is 3MHz for RMS Average ((duty cycle ˂ 98%) for Average detection (AV) at frequency above 1GHz, then the measurement results was added to a correction factor (20log(1/duty cycle)). 4: The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is 10Hz (duty cycle ˃ 98%) for Average detection (AV) at frequency above 1GHz. EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 25 of 29 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.16.020.01 Limit The radio emission outside the operating frequency band shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power. Radiated emissions which fall in the restricted bands, as defined in section15.205, must comply with the radiated emission limits specified in section 15.209. Frequency Field Strength Field Strength Detector MHz uV/m dBμV/m 30-88 100 40 QP 88-216 150 43.5 QP 216-960 200 46 QP 960-1000 500 54 QP Above 1000 500 54 AV Above 1000 5000 74 PK EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 26 of 29 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.16.020.01 Spurious radiated emissions for transmitter According to C63.10, if the peak (or quasi-peak) measured value complies with the average limit, it is unnecessary to perform an average measurement, so AV emission value did not show in below table if the peak value complies with average limit. Transmitting spurious emission test result as below: BT4.0 GFSK Modulation 2402MHz Test Result Emission Frequency Frequency Polarization Limit Detector Margin Result Level band MHz dBuV/m dBμV/m dBuV/m 30- 43.25 22.35 H 40.0 QP 17.65 Pass 1000MHz 863.52 28.90 V 46.0 QP 17.10 Pass 1000- 9807.50 42.33 H 74 PK 31.67 Pass 25000MHz 8442.50“*” 39.95 V 74 PK 34.05 Pass BT4.0 GFSK Modulation 2440MHz Test Result Emission Frequency Frequency Polarization Limit Detector Margin Result Level band MHz dBuV/m dBμV/m dBuV/m 30- -- -- H 43.5 QP -- Pass 1000MHz -- -- H 46 QP -- Pass 1000- 7483.00 “*” 39.07 H 74 PK 34.93 Pass 25000MHz 7477.00 “*” 39.18 V 74 PK 34.82 Pass BT4.0 GFSK Modulation 2480MHz Test Result Emission Frequency Frequency Polarization Limit Detector Margin Result Level band MHz dBuV/m dBμV/m dBuV/m 30- -- -- H 43.5 QP -- Pass 1000MHz -- -- H 46 QP -- Pass 1000- 7532.00 “*” 39.93 H 74 PK 34.07 Pass 25000MHz 8730.50 40.86 H 74 PK 33.14 Pass Remark: (1) Data of measurement within this frequency range shown “-” in the table above means the reading of emissions are attenuated more than 20db below the permissible limits or the field strength is too small to be measured. (2) “*” means the emission(s) appear within the restrict bands shall follow the requirement of section 15.205. EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 27 of 29 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.16.020.01 10 Test Equipment List List of Test Instruments CAL. DUE DESCRIPTION MANUFACTURER MODEL NO. SERIAL NO. DATE C Signal Generator Rohde & Schwarz SMB100A 108272 2017-7-15 Signal Analyzer Rohde & Schwarz FSV40 101030 2017-7-15 Vector Signal Rohde & Schwarz 105324 2017-7-15 SMU 200A Generator OSP120/OS 101226/10085 RF Switch Module Rohde & Schwarz 2017-7-15 P-B157 1 EMI Test Receiver Rohde & Schwarz ESR 26 101269 2017-7-15 Trilog Super Broadband Test Schwarzbeck VULB 9163 707 2017-8-13 Antenna RE Horn Antenna Rohde & Schwarz HF907 102294 2017-7-24 Pre-amplifier Rohde & Schwarz SCU 18 102230 2017-7-15 3m Semi-anechoic 2019-5-29 TDK 9X6X6 ---- chamber C - Conducted RF tests  Conducted peak output power  6dB bandwidth  Power spectral density*  Spurious RF conducted emissions  Band edge EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 28 of 29 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.16.020.01 11 System Measurement Uncertainty For a 95% confidence level, the measurement expanded uncertainties for defined systems, in accordance with the recommendations of ISO 17025 were: System Measurement Uncertainty Test Items Extended Uncertainty Uncertainty for Radiated Emission in 3m chamber 30MHz-1000MHz Horizontal: 4.83dB; Vertical: 4.91dB; Uncertainty for Radiated Emission in 3m chamber 1000MHz- Horizontal: 4.89dB; 18000MHz Vertical: 4.88dB; Uncertainty for Conducted Emission 150KHz-30MHz U=3.5dB(k=2) EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 29 of 29 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299


Document Created: 2016-09-02 16:27:43
Document Modified: 2016-09-02 16:27:43
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC