Attachment Attachment

This document pretains to SPC-NEW-20130221-00004 for New Application on a Signaling Point Code filing.

IBFS_SPCNEW2013022100004_986979

Syniverse Technologies, LLC Application for International Signaling Point Codes (Wentzville, MO/Dallas, TX Network) Syniverse Technologies, LLC (“Syniverse”) requests three new international signaling point codes (“ISPCs”) for use in its signaling network. The planned implementation date for the new network is March 1, 2013. Further information to support this request is as follows: • Syniverse is installing new hardware and signal transfer points (“STPs”) which are needed to support growth of its network. • Function of new ISPCs: o One ISPC assigned to Wentzville STP facilities o One ISPC assigned to Dallas STP facilities o One ISPC for use as a capability point code • Type of SS7 equipment: Performance Technologies x401 STPs • Signaling service provided – mobile roaming • Networks other than Syniverse will use the ISPCs for link alignment to Syniverse’s network. The new ISPCs are necessary to ensure proper signaling network management. A network diagram of Syniverse’s network is set forth below. ITU customer #1 Syniverse Wentzville PT STP ITU customer #2 (Requires physical ISPC) (Requires capability [alias] ISPC for loadsharing) ITU Customer #1 Syniverse Dallas PT STP ITU customer #2 (Requires physical ISPC) (Mobile roaming signaling flow)


Document Created: 2013-02-21 16:36:37
Document Modified: 2013-02-21 16:36:37
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC