Attachment E040198

This document pretains to SES-LIC-20040427-00594 for License on a Satellite Earth Station filing.

IBFS_SESLIC2004042700594_374243

From: Craig J Emerick [Craig_J_Emerick@raytheon.com] Sent: Monday, May 24, 2004 10:42 AM To: Towanda Bryant Cc: Steve Hamiel; stephen_e_ellefson@raytheon.com Subject: RE: SES-LIC-20040427-00593 Towanda, Both SES-LIC-20040428-00601 and SES-LIC-20040427-00594 will have the same corrections as follows: EIRP should be 65.66 dBW Eirp Density should be 35.15 dBW / 4kHz Pt should be 12.46 dBW or 17.626 Watts The problem is the same as the last, the incorrect Pt was submitted, and the incorrect EIRP density was used. Hopefully this will be the last batch of applications with this problem. Again I apologize and thank you for your patience. Best Regards Craig J. Emerick Systems Engineer II Raytheon Systems Office 402-682-5151 LAB 402-293-2955 Cell 402-490-8836 or 402-578-9545 Fax 402-293-2901 "Towanda Bryant" <Towanda.Bryant@ To: "Craig J Emerick" <Craig_J_Emerick@Raytheon.com> fcc.gov> cc: Subject: RE: SES-LIC-20040427- 00593 05/24/2004 09:02 AM Tnx. T. -----Original Message----- From: Craig J Emerick [mailto:Craig_J_Emerick@raytheon.com] Sent: Monday, May 24, 2004 8:32 AM To: Towanda Bryant

Cc: stephen_e_ellefson@raytheon.com; Steve Hamiel Subject: RE: SES-LIC-20040427-00593 Towanda, I received the faxes and will get the information back to you within a couple of hours. Thanks again. Best Regards Craig J. Emerick Systems Engineer II Raytheon Systems Office 402-682-5151 LAB 402-293-2955 Cell 402-490-8836 or 402-578-9545 Fax 402-293-2901 "Towanda Bryant" <Towanda.Bryant@ To: "Craig J Emerick" <Craig_J_Emerick@raytheon.com> fcc.gov> cc: Subject: RE: SES-LIC-20040427- 00593 05/21/2004 02:52 PM Sorry, I have another one. SES-LIC-20040428-00601. I will fax in a minute. Tnx. T. -----Original Message----- From: Craig J Emerick [mailto:Craig_J_Emerick@raytheon.com] Sent: Friday, May 21, 2004 12:28 PM To: Towanda Bryant

Cc: stephen_e_ellefson@raytheon.com; Steve Hamiel Subject: SES-LIC-20040427-00593 Towanda, I just had to deal with this on a different license application. I resolved these issues with Bill Howden who was very helpful. The problem is, the gentleman who submitted the application put the input EIRP Density. He also put the size of the amplifier used (8 watts), not the amount of power radiating on the dish. The solution is as follows: a. Pt should equal 4.09 watts b. EIRP should equal 55.32 dBW c. EIRP Density should equal 34.25 dBW / 4kHz I hope this is satisfactory. And again thank you for your patience. Best Regards Craig J. Emerick Systems Engineer II Raytheon Systems Office 402-682-5151 LAB 402-293-2955 Cell 402-490-8836 or 402-578-9545 Fax 402-293-2901


Document Created: 2004-05-25 13:32:29
Document Modified: 2004-05-25 13:32:29
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC