Attachment Narrative

This document pretains to SAT-MOD-20190813-00074 for Modification on a Satellite Space Stations filing.

IBFS_SATMOD2019081300074_1845724

                                    Before the
                      FEDERAL COMMUNICATIONS COMMISSION
                               Washington, D.C. 20554


In the Matter of                                          )
                                                          )
SES AMERICOM, INC.                                        )    File No. SAT-MOD-___________
                                                          )    Call Sign S2433
Application for Modification of AMC-11                    )
Fixed-Satellite Space Station License                     )

                         APPLICATION OF SES AMERICOM, INC.

               SES Americom, Inc. (“SES”) respectfully requests a modification of its license

for the AMC-11 C-band fixed-satellite space station to extend the license term to March 1, 2026.

The requested extension will serve the public interest by enabling SES to continue to offer

services using AMC-11, thus promoting efficient use of satellite and orbital resources. SES also

seeks any necessary further authority to raise the satellite to a disposal orbit at end of life. A

completed FCC Form 312 is attached, and SES incorporates by reference the technical

information previously provided in support of AMC-11.1 In addition, SES is providing an orbital

debris mitigation statement regarding the spacecraft.

               AMC-11 is a C-band satellite that is located at 131° W.L. with a license term that

expires November 4, 2019. SES requests an extension of the AMC-11 license term to March 1,

2026. SES has calculated that there is sufficient fuel onboard AMC-11 for the spacecraft to

continue providing reliable service during the proposed extended license term and to deorbit the

spacecraft to a disposal altitude of at least 281 kilometers above the geostationary arc, as

discussed below.



1
 SES Americom, Inc., Call Sign S2433, File No. SAT-LOA-20020104-00002, grant-stamped
Dec. 29, 2003 (the “AMC-11 License”).


               The satellite’s overall health is good, with all satellite subsystems functioning

nominally. There is no single point of failure in the satellite’s design; and there is no problem

with the satellite’s TT&C links, including the back-up TT&C links. As a result, extending the

license term for AMC-11 will serve the public interest by allowing SES to continue to use the

spacecraft to provide service to customers, promoting the efficient use of satellite and orbital

resources.

               Because SES applied for and was granted the AMC-11 license before the

Commission’s orbital debris mitigation rule in Section 25.283(c) took effect and has not sought

any subsequent modifications of the satellite’s authority, SES has not previously filed an orbital

debris mitigation plan for the satellite. As demonstrated in the plan attached hereto, SES intends

to raise AMC-11 to a disposal altitude with a minimum perigee of 281 kilometers above the

geostationary arc, consistent with Section 25.283(a), to vent all excess propellant and pressurant,

and to passivate the satellite as required by Section 25.283(c). However, AMC-11 is a Lockheed

Martin A2100 series spacecraft, and the oxidizer tanks on the spacecraft were sealed following

completion of the launch phase and will therefore retain residual pressure when the spacecraft is

retired. Given the spacecraft design, it is physically impossible for SES to vent the oxidizer

tanks.

               SES seeks a waiver of Section 25.283(c) with respect to this residual oxidizer.

Grant of the requested waiver is consistent with Commission policy and precedent:

               The Commission may waive a rule for good cause shown. Waiver
               is appropriate if special circumstances warrant a deviation from the
               general rule and such deviation would better serve the public
               interest than would strict adherence to the general rule. Generally,
               the Commission may grant a waiver of its rules in a particular case




                                                 2


                if the relief requested would not undermine the policy objective of
                the rule in question and would otherwise serve the public interest.2

                In a number of cases involving various spacecraft models with similar limitations,

the Commission has waived Section 25.283(c) to permit launch and operation of spacecraft that

do not allow for full venting of pressure vessels at end of life, based on a finding that modifying

the space station design at a late stage of construction would pose an undue hardship.3 AMC-11

was licensed and launched before the venting requirements were adopted, and there is no

question of bringing the satellite into compliance with the rule. The Commission has expressly

recognized this, finding a waiver of Section 25.283(c) to be justified for in-orbit spacecraft that

cannot satisfy the rule’s requirements. For example, in a decision involving the SES AMC-2

satellite, which like AMC-11 was launched before Section 25.283(c) was adopted, the

Commission waived the rule on its own motion, observing that venting the spacecraft’s sealed

oxidizer tanks “would require direct retrieval of the satellite, which is not currently possible.”4




2
    PanAmSat Licensee Corp., 17 FCC Rcd 10483, 10492 (Sat. Div. 2002) (footnotes omitted).
3
  See, e.g., EchoStar Satellite Operating Corp., File No. SAT-LOA-20071221-00183, Call Sign
S2746, grant-stamped Mar. 12, 2008, Attachment at ¶ 4 (granting a partial waiver of
Section 25.283(c) for AMC-14, a Lockheed Martin A2100 model spacecraft, on grounds that
requiring modification of satellite would present an undue hardship); DIRECTV Enterprises
LLC, File No. SAT-LOA-20090807-00086, Call Sign S2797, grant-stamped Dec. 15, 2009,
Attachment at ¶ 4 (same for DIRECTV 12, a Boeing 702 model spacecraft); PanAmSat Licensee
Corp., File Nos. SAT-MOD-20070207-00027, SAT-AMD-20070716-00102, Call Sign S2237,
grant-stamped Oct. 4, 2007, Attachment at ¶ 7 (same for Intelsat 11, an Orbital Sciences Star
model spacecraft).
4
 File No. SAT-MOD-20101215-00261, Call Sign S2134, grant-stamped Mar. 8, 2011,
Attachment at ¶ 4. See also XM Radio Inc., File No. SAT-MOD-20100722-00165, Call Sign
S2616, grant-stamped Oct. 14, 2010, Attachment at ¶ 2 (waiving Section 25.283(c) for XM-4, a
Boeing 702 model spacecraft, because “modification of the spacecraft would present an undue
hardship, since XM-4 is an in-orbit space station and venting XM-4’s helium and xenon tanks
would require direct retrieval of the satellite, which is not currently possible”).

                                                  3


               The same practical obstacle is present here. Because AMC-11 is already in orbit,

SES can do nothing to enable full venting of residual pressure in the oxidizer tanks. Given this

reality, waiver is clearly warranted; there is no possible public interest benefit in requiring strict

adherence to a rule with which the licensee is incapable of complying.

               For the foregoing reasons, SES respectfully requests that the Commission grant a

modification of the AMC-11 license to extend the satellite’s license term through March 1, 2026

and grant the requested Section 25.283(c) waiver to permit retirement of AMC-11 pursuant to

the attached orbital debris mitigation plan.

                                               Respectfully submitted,

                                               SES AMERICOM, INC.

                                               By: /s/ Petra A. Vorwig

Of Counsel                                         Petra A. Vorwig
Karis A. Hastings                                  Senior Legal & Regulatory Counsel
SatCom Law LLC                                     SES Americom, Inc.
1317 F Street, N.W., Suite 400                     1129 20th Street, N.W., Suite 1000
Washington, D.C. 20004                             Washington, D.C. 20036
Tel: (202) 599-0975

Dated: August 13, 2019




                                                   4


                     Annex: AMC-11 Orbital Debris Mitigation Plan


Spacecraft Hardware Design: SES has assessed and limited the amount of debris released in a
planned manner during normal operations of AMC-11 at 131° W.L. No debris is generated
during normal on-station operations, and the spacecraft is in a stable configuration. The satellite
is operating with an E-W stationkeeping tolerance of +/- 0.05 degrees.

SES has also assessed and limited the probability of the space station becoming a source of
orbital debris by collisions with small debris or meteoroids that could cause loss of control and
prevent post-mission disposal. SES requires that spacecraft manufacturers assess the probability
of micrometeorite damage that can cause any loss of functionality. This probability is then
factored into the ultimate spacecraft probability of success. Any significant probability of
damage would need to be mitigated in order for the spacecraft design to meet SES’ required
probability of success of the mission. SES has taken the following steps to limit the effects of
such collisions: (1) critical spacecraft components are located inside the protective body of the
spacecraft and properly shielded; and (2) all spacecraft subsystems have redundant components
to ensure no single-point failures. The spacecraft will not use any subsystems for end-of-life
disposal that are not used for normal operations.

Minimizing Accidental Explosions: SES has assessed and limited the probability of accidental
explosions during and after completion of mission operations. As part of the Safety Data
Package submission for SES spacecraft, an extensive analysis is completed by the spacecraft
manufacturer, reviewing each potential hazard relating to accidental explosions. A matrix is
generated indicating the worst-case effect, the hazard cause, and the hazard controls available to
minimize the severity and the probability of occurrence. Each subsystem is analyzed for
potential hazards, and the Safety Design Package is provided for each phase of the program
running from design phase, qualification, manufacturing and operational phase of the spacecraft.
Also, the spacecraft manufacturer generates a Failure Mode Effects and Criticality Analysis for
the spacecraft to identify all potential mission failures. The risk of accidental explosion is
included as part of this analysis. This analysis indicates failure modes, possible causes, methods
of detection, and compensating features of the spacecraft design.

The design of the AMC-11 spacecraft is such that the risk of explosion is minimized both during
and after mission operations. In designing and building the spacecraft, the manufacturer took
steps to ensure that debris generation will not result from the conversion of energy sources on
board the satellite into energy that fragments the satellite. All propulsion subsystem pressure
vessels, which have high margins of safety at launch, have even higher margins in orbit, since
use of propellants and pressurants during launch decreases the propulsion system pressure. Burst
tests were performed on all pressure vessels during qualification testing to demonstrate a margin
of safety against burst. Bipropellant mixing is prevented by the use of valves that prevent
backwards flow in propellant and pressurization lines. All pressures, including those of the
batteries, are monitored by telemetry.

At the end of operational life, after the satellite has reached its final disposal orbit, onboard
sources of stored energy will be depleted or secured, and the batteries will be discharged.


However, at the end of AMC-11’s operational life, there will be oxidizer remaining in the tanks
that cannot be vented. Following insertion of the spacecraft into orbit, the spacecraft
manufacturer permanently sealed the oxidizer tanks by firing pyrotechnic valves. This is a
design feature of the Lockheed A2100 series spacecraft that cannot now be changed or
remedied. Information regarding the residual oxidizer in the tanks is as follows:

        Tank         Volume (l)      Pressure (bar)   Temp. (deg C)      Oxidizer mass (kg)

          Ox 1           229.1            17.7              20.0                 7.06

          Ox 2           229.1            17.7              20.0                 7.06


Safe Flight Profiles: SES has assessed and limited the probability of the space station becoming
a source of debris by collisions with large debris or other operational space stations.
Specifically, SES has assessed the possibility of collision with satellites located at, or reasonably
expected to be located at, the requested orbital location or assigned in the vicinity of that
location. Regarding avoidance of collisions with controlled objects, in general, if a
geosynchronous satellite is controlled within its specified longitude and latitude stationkeeping
limits, collision with another controlled object (excluding where the satellite is collocated with
another object) is the direct result of that object entering the allocated space.

AMC-11 currently operates at the 131° W.L. orbital location, and on-station operations require
station-keeping within the +/- 0.05 degree N-S and +/- 0.05 degree E-W control box, thereby
ensuring adequate collision avoidance distance from other satellites in geosynchronous orbit.
SES is not aware of any other FCC- or non-FCC licensed spacecraft that are operational or
planned to be deployed at 131° W.L. or to nearby orbital locations such that there would be an
overlap with the stationkeeping volume of AMC-11. Furthermore, SES is not aware of any other
system with an overlapping station-keeping volume with AMC-11 that is either in orbit or
progressing towards launch. Based on the preceding, it is concluded that physical coordination
of the AMC-11 satellite with another party is not required at the present time.

SES uses the Space Data Center (“SDC”) system from the Space Data Association to monitor the
risk of close approach of its satellites with other objects. Any close encounters (separation of
less than 10 km) are flagged and investigated in more detail. If required, avoidance maneuvers
are performed to eliminate the possibility of collisions. During any relocation, the moving
spacecraft is maneuvered such that it is at least 30 km away from the synchronous radius at all
times. In most cases, much larger deviation from the synchronous radius is used. In addition,
the SDC system is used to ensure no close encounter occurs during the move. When de-orbit of
a spacecraft is required, the initial phase is treated as a satellite move, and the same precautions
are used to ensure collision avoidance.

Post-Mission Disposal: Post-mission disposal of the satellite from operational orbit will be
accomplished by carrying out maneuvers to a higher orbit. The upper stage engine remains part
of the satellite, and there is no re-entry phase for either component. The fuel budget for
elevating the satellite to a disposal orbit is included in the satellite design. SES plans to

                                                  2


maneuver AMC-11 to a disposal orbit with a minimum perigee of 281 km above the normal
GSO operational orbit. This proposed disposal orbit altitude results from application of the
IADC formula based on the following calculation:

Total Solar Pressure Area “A” = 29.7 m2
“M” = Dry Mass of Satellite = 911.8 kg
“CR” = Solar Pressure Radiation Coefficient = 1.4
Therefore the Minimum Disposal Orbit Perigee Altitude:
= 36,021 km + 1000 x CR x A / M
= 36,021 km + 1000 x 1.40 x 29.7 / 911.8
= 36,067 km
= 281 km above GSO (35,786 km)

SES intends to reserve 5.1 kg of propellant in order to account for post-mission disposal of
AMC-11. SES has assessed fuel-gauging uncertainty and has provided an adequate margin of
fuel reserve to address the assessed uncertainty.




                                                3


                                        DECLARATION


               I, Charles Law, hereby certify under penalty of perjury that I am the technically

qualified person responsible for preparation of the technical information contained in the

foregoing application; that I am familiar with the technical requirements of Part 25; and that I

either prepared or reviewed the technical information contained in the application and that it is

complete and accurate to the best of my knowledge, information and belief.

                                              _/s/__Charles Law__________________
                                              Senior Manager, Flight Dynamics
                                              SES S.A.


Dated: August 13, 2019



Document Created: 2019-08-13 10:57:46
Document Modified: 2019-08-13 10:57:46

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC