Attachment Sched S Tech Report

This document pretains to SAT-MOD-20170912-00129 for Modification on a Satellite Space Stations filing.

IBFS_SATMOD2017091200129_1274787

Approved by OMB 3060-0678 Estimated Burden: up to 80 hours April 2016 312 File Number: SATMOD2017091200129 Filing Description Question Response Description SW1 MOD to move to 139W

Satellite Question Response Information Select Orbit Type GSO Space Station or Satellite Network Name SPACEWAY 1 Estimated Lifetime of Satellite(s) From Date of Launch 20 Years Will the space station(s) operate on a Common Carrier basis? No

Operating Mode Frequency Nature of service Description Frequency Band(s) Type Bands (4) Fixed-Satellite 19700.0 MHz -20200.0 Transmit Service MHz Fixed-Satellite 18300.0 MHz -18800.0 Transmit Service MHz Fixed-Satellite 28350.0 MHz -28600.0 Receive Service MHz Fixed-Satellite 29250.0 MHz -30000.0 Receive Service MHz

Orbital Section Question Response Information For Geostationary Orbital Longitude Information Orbital Longitude 139.0 Satellites degrees Hemisphere of Orbital W Longitude Longitudinal Tolerance or East Toward West 0.05 /West Station-Keeping degrees Toward East 0.05 degrees Inclination Excursion or North Inclination Excursion or North 0.05 /South Station-Keeping /South Station-Keeping degrees Tolerance Tolerance Antenna Axis Attitude Accuracy Roll 0.1 degrees Pitch 0.1 degrees Yaw 0.1 degrees

Receiving Question Response Beams 1: Beam ID RX2L Receive Beam 29250.0 MHz -30000.0 MHz Frequency Beam Type Spot Polarization LHCP Peak Gain 50.0 dBi Antenna 0.1 degrees Pointing Error Antenna 0.1 degrees Rotational Error Polarization Switchable Polarization 45.0 degrees Alignment Relative to the Equatorial Plane G/T at Max. 22.0 dB/K Gain Point Min. Saturation -100.0 dBW/m2 Flux Density Max. Saturation -90.0 dBW/m2 Flux Density Co- or Cross C Polar Mode Service Area Service area is -6 dB contour. Note that receive beam is not Description fed into transponder as this satellite has on-board processing. Saturation flux density values above were entered to satisfy Schedule S Receiving Question Response Beams 2: Beam ID RX3L

Receive Beam 29250.0 MHz -30000.0 MHz Frequency Beam Type Spot Polarization LHCP Peak Gain 50.2 dBi Antenna 0.1 degrees Pointing Error Antenna 0.1 degrees Rotational Error Polarization Switchable Polarization 45.0 degrees Alignment Relative to the Equatorial Plane G/T at Max. 22.0 dB/K Gain Point Min. Saturation -100.0 dBW/m2 Flux Density Max. Saturation -90.0 dBW/m2 Flux Density Co- or Cross C Polar Mode Service Area Service area is -6 dB contour. Note that receive beam is not Description fed into transponder as this satellite has on-board processing. Saturation flux density values above were entered to satisfy Schedule S Receiving Question Response Beams 3: Beam ID RX4L Receive Beam 29250.0 MHz -30000.0 MHz Frequency Beam Type Spot

Polarization LHCP Peak Gain 50.2 dBi Antenna 0.1 degrees Pointing Error Antenna 0.1 degrees Rotational Error Polarization Switchable Polarization 45.0 degrees Alignment Relative to the Equatorial Plane G/T at Max. 22.0 dB/K Gain Point Min. Saturation -100.0 dBW/m2 Flux Density Max. Saturation -90.0 dBW/m2 Flux Density Co- or Cross C Polar Mode Service Area Service area is -6 dB contour. Note that receive beam is not Description fed into transponder as this satellite has on-board processing. Saturation flux density values above were entered to satisfy Schedule S Receiving Question Response Beams 4: Beam ID RX5L Receive Beam 29250.0 MHz -30000.0 MHz Frequency Beam Type Spot Polarization LHCP Peak Gain 50.1 dBi

Antenna 0.1 degrees Pointing Error Antenna 0.1 degrees Rotational Error Polarization Switchable Polarization 45.0 degrees Alignment Relative to the Equatorial Plane G/T at Max. 22.0 dB/K Gain Point Min. Saturation -100.0 dBW/m2 Flux Density Max. Saturation -90.0 dBW/m2 Flux Density Co- or Cross C Polar Mode Service Area Service area is -6 dB contour. Note that receive beam is not Description fed into transponder as this satellite has on-board processing. Saturation flux density values above were entered to satisfy Schedule S Receiving Question Response Beams 5: Beam ID RX1R Receive Beam 29250.0 MHz -30000.0 MHz Frequency Beam Type Spot Polarization RHCP Peak Gain 50.1 dBi Antenna 0.1 degrees Pointing Error Antenna 0.1 degrees Rotational Error

Polarization Switchable Polarization 45.0 degrees Alignment Relative to the Equatorial Plane G/T at Max. 50.1 dB/K Gain Point Min. Saturation -100.0 dBW/m2 Flux Density Max. Saturation -90.0 dBW/m2 Flux Density Co- or Cross C Polar Mode Service Area Service area is -6 dB contour. Note that receive beam is not Description fed into transponder as this satellite has on-board processing. Saturation flux density values above were entered to satisfy Schedule S Receiving Question Response Beams 6: Beam ID RX2R Receive Beam 29250.0 MHz -30000.0 MHz Frequency Beam Type Spot Polarization RHCP Peak Gain 50.1 dBi Antenna 0.1 degrees Pointing Error Antenna 0.1 degrees Rotational Error Polarization Switchable

Polarization 45.0 degrees Alignment Relative to the Equatorial Plane G/T at Max. 22.0 dB/K Gain Point Min. Saturation -100.0 dBW/m2 Flux Density Max. Saturation -90.0 dBW/m2 Flux Density Co- or Cross C Polar Mode Service Area Service area is -6 dB contour. Note that receive beam is not Description fed into transponder as this satellite has on-board processing. Saturation flux density values above were entered to satisfy Schedule S Receiving Question Response Beams 7: Beam ID RX3R Receive Beam 29250.0 MHz -30000.0 MHz Frequency Beam Type Spot Polarization RHCP Peak Gain 50.1 dBi Antenna 0.1 degrees Pointing Error Antenna 0.1 degrees Rotational Error Polarization Switchable Polarization 45.0 degrees Alignment Relative to the Equatorial Plane

G/T at Max. 22.0 dB/K Gain Point Min. Saturation -100.0 dBW/m2 Flux Density Max. Saturation -90.0 dBW/m2 Flux Density Co- or Cross C Polar Mode Service Area Service area is -6 dB contour. Note that receive beam is not Description fed into transponder as this satellite has on-board processing. Saturation flux density values above were entered to satisfy Schedule S Receiving Question Response Beams 8: Beam ID RX4R Receive Beam 29250.0 MHz -30000.0 MHz Frequency Beam Type Spot Polarization RHCP Peak Gain 50.1 dBi Antenna 0.1 degrees Pointing Error Antenna 0.1 degrees Rotational Error Polarization Switchable Polarization 45.0 degrees Alignment Relative to the Equatorial Plane G/T at Max. 22.0 dB/K Gain Point Min. Saturation -100.0 dBW/m2 Flux Density

Max. Saturation -90.0 dBW/m2 Flux Density Co- or Cross C Polar Mode Service Area Service area is -6 dB contour. Note that receive beam is not Description fed into transponder as this satellite has on-board processing. Saturation flux density values above were entered to satisfy Schedule S Receiving Question Response Beams 9: Beam ID RX5R Receive Beam 29250.0 MHz -30000.0 MHz Frequency Beam Type Spot Polarization RHCP Peak Gain 50.1 dBi Antenna 0.1 degrees Pointing Error Antenna 0.1 degrees Rotational Error Polarization Switchable Polarization 45.0 degrees Alignment Relative to the Equatorial Plane G/T at Max. 22.0 dB/K Gain Point Min. Saturation -100.0 dBW/m2 Flux Density Max. Saturation -90.0 dBW/m2 Flux Density Co- or Cross C Polar Mode

Service Area Service area is -6 dB contour. Note that receive beam is not Description fed into transponder as this satellite has on-board processing. Saturation flux density values above were entered to satisfy Schedule S Receiving Question Response Beams 10: Beam ID RX6L Receive Beam 28350.0 MHz -28600.0 MHz Frequency Beam Type Spot Polarization LHCP Peak Gain 50.1 dBi Antenna 0.1 degrees Pointing Error Antenna 0.1 degrees Rotational Error Polarization Switchable Polarization 45.0 degrees Alignment Relative to the Equatorial Plane G/T at Max. 22.0 dB/K Gain Point Min. Saturation -100.0 dBW/m2 Flux Density Max. Saturation -90.0 dBW/m2 Flux Density Co- or Cross C Polar Mode Service Area Service area is -6 dB contour. Note that receive beam is not Description fed into transponder as this satellite has on-board processing. Saturation flux density values above were entered to satisfy Schedule S

Receiving Question Response Beams 11: Beam ID RX7L Receive Beam 28350.0 MHz -28600.0 MHz Frequency Beam Type Spot Polarization LHCP Peak Gain 50.0 dBi Antenna 0.1 degrees Pointing Error Antenna 0.1 degrees Rotational Error Polarization Switchable Polarization 45.0 degrees Alignment Relative to the Equatorial Plane G/T at Max. 22.0 dB/K Gain Point Min. Saturation -100.0 dBW/m2 Flux Density Max. Saturation -90.0 dBW/m2 Flux Density Co- or Cross C Polar Mode Service Area Service area is -6 dB contour. Note that receive beam is not Description fed into transponder as this satellite has on-board processing. Saturation flux density values above were entered to satisfy Schedule S Receiving Question Response Beams 12: Beam ID RX1L

Receive Beam 29250.0 MHz -30000.0 MHz Frequency Beam Type Spot Polarization LHCP Peak Gain 50.1 dBi Antenna 0.1 degrees Pointing Error Antenna 0.1 degrees Rotational Error Polarization Switchable Polarization 45.0 degrees Alignment Relative to the Equatorial Plane G/T at Max. 22.0 dB/K Gain Point Min. Saturation -100.0 dBW/m2 Flux Density Max. Saturation -90.0 dBW/m2 Flux Density Co- or Cross C Polar Mode Service Area Service area is -6 dB contour. Note that receive beam is not Description fed into transponder as this satellite has on-board processing. Saturation flux density values above were entered to satisfy Schedule S Receiving Question Response Beams 13: Beam ID CMD Receive Beam 29250.0 MHz -30000.0 MHz Frequency Beam Type Spot

Polarization LHCP Peak Gain 51.3 dBi Antenna 0.3 degrees Pointing Error Antenna 0.3 degrees Rotational Error Polarization Switchable Polarization 45.0 degrees Alignment Relative to the Equatorial Plane G/T at Max. 22.0 dB/K Gain Point Min. Saturation -100.0 dBW/m2 Flux Density Max. Saturation -90.0 dBW/m2 Flux Density Co- or Cross C Polar Mode Service Area Service area is -6 dB contour. Note that receive beam is not Description fed into transponder as this satellite has on-board processing. Saturation flux density values above were entered to satisfy Schedule S

Receiving Center Channels (2) Channel Channel Frequency s Feeder Link, Service ID Bandwidth (MHz) (MHz) Link or TT&C RL03 62.5 29531.25 Service Link RL01 165.0 28442.5 Service Link

Transmitting Question Response Beams 1: Beam ID TX1L Transmit Beam Frequency 19700.0 MHz -20200.0 MHz Beam Type Shapeable Polarization LHCP Peak Gain 0.1 dBi Antenna Pointing Error 0.1 degrees Antenna Rotational Error 0.1 degrees Polarization Switchable Polarization Alignment Relative to the Equatorial 45.0 degrees Plane Max. Transmit EIRP Density -16.1 dBW/Hz Max. Transmit EIRP 59.5 dBW Co- or Cross Polar Mode C Service Area Description Eastern Alaska Max. Power Flux Density * 10° - * 15° - * 20° - * 25° - * 0° - 5° * 5° - 10° 15° 20° 25° 90° * (dbW/m2 (dbW/m2 (dbW/m2 (dbW/m2 (dbW/m2 (dbW/m2 BW: /BW): /BW): /BW): /BW): /BW): /BW): 1.0 -120.0 -120.0 -120.0 -122.0 -124.0 -126.0 MHz Transmitting Question Response Beams 2: Beam ID TX1R Transmit Beam Frequency 19700.0 MHz -20200.0 MHz

Beam Type Shapeable Polarization RHCP Peak Gain 44.3 dBi Antenna Pointing Error 0.1 degrees Antenna Rotational Error 0.1 degrees Polarization Switchable Polarization Alignment Relative to the Equatorial 45.0 degrees Plane Max. Transmit EIRP Density -16.1 dBW/Hz Max. Transmit EIRP 59.5 dBW Co- or Cross Polar Mode C Service Area Description Western Alaska Max. Power Flux Density * 10° - * 15° - * 20° - * 25° - * 0° - 5° * 5° - 10° 15° 20° 25° 90° * (dbW/m2 (dbW/m2 (dbW/m2 (dbW/m2 (dbW/m2 (dbW/m2 BW: /BW): /BW): /BW): /BW): /BW): /BW): 1.0 -124.0 -124.0 -118.0 -118.0 -118.0 -122.0 MHz Transmitting Question Response Beams 3: Beam ID TX2R Transmit Beam Frequency 19700.0 MHz -20200.0 MHz Beam Type Spot Polarization RHCP Peak Gain 51.3 dBi Antenna Pointing Error 0.1 degrees Antenna Rotational Error 0.1 degrees

Polarization Switchable Polarization Alignment Relative to the 45.0 degrees Equatorial Plane Max. Transmit EIRP Density -16.1 dBW/Hz Max. Transmit EIRP 59.5 dBW Co- or Cross Polar Mode C Service Area Description Service area is -6 dB gain contour of spot beam Max. Power Flux Density * 10° - * 15° - * 20° - * 25° - * 0° - 5° * 5° - 10° 15° 20° 25° 90° * (dbW/m2 (dbW/m2 (dbW/m2 (dbW/m2 (dbW/m2 (dbW/m2 BW: /BW): /BW): /BW): /BW): /BW): /BW): 1.0 -133.0 -128.0 -120.0 -118.0 -118.0 -120.0 MHz Transmitting Question Response Beams 4: Beam ID TX3R Transmit Beam Frequency 19700.0 MHz -20200.0 MHz Beam Type Spot Polarization RHCP Peak Gain 51.4 dBi Antenna Pointing Error 0.1 degrees Antenna Rotational Error 0.1 degrees Polarization Switchable Polarization Alignment Relative to the Equatorial 45.0 degrees Plane Max. Transmit EIRP Density -16.1 dBW/Hz

Max. Transmit EIRP 59.5 dBW Co- or Cross Polar Mode C Service Area Description Service area is -6 dB contour Max. Power Flux Density * 10° - * 15° - * 20° - * 25° - * 0° - 5° * 5° - 10° 15° 20° 25° 90° * (dbW/m2 (dbW/m2 (dbW/m2 (dbW/m2 (dbW/m2 (dbW/m2 BW: /BW): /BW): /BW): /BW): /BW): /BW): 1.0 -138.0 -128.0 -120.0 -118.0 -118.0 -122.0 MHz Transmitting Question Response Beams 5: Beam ID TX4L Transmit Beam Frequency 18300.0 MHz -18800.0 MHz Beam Type Fixed Polarization LHCP Peak Gain 22.0 dBi Antenna Pointing Error 0.1 degrees Antenna Rotational Error 0.1 degrees Polarization Switchable Polarization Alignment Relative to the Equatorial 45.0 degrees Plane Max. Transmit EIRP Density -30.6 dBW/Hz Max. Transmit EIRP 45.0 dBW Co- or Cross Polar Mode C Service Area Description Service ares is Alaska Max. Power Flux Density

Max. Power Flux Density * 10° - * 15° - * 20° - * 25° - * 0° - 5° * 5° - 10° 15° 20° 25° 90° * (dbW/m2 (dbW/m2 (dbW/m2 (dbW/m2 (dbW/m2 (dbW/m2 BW: /BW): /BW): /BW): /BW): /BW): /BW): 1.0 -133.0 -133.0 -133.0 -133.0 -133.0 -133.0 MHz Transmitting Question Response Beams 6: Beam ID TX4R Transmit Beam Frequency 18300.0 MHz -18800.0 MHz Beam Type Fixed Polarization RHCP Peak Gain 22.0 dBi Antenna Pointing Error 0.1 degrees Antenna Rotational Error 0.1 degrees Polarization Switchable Polarization Alignment Relative to the Equatorial 45.0 degrees Plane Max. Transmit EIRP Density -30.6 dBW/Hz Max. Transmit EIRP 45.0 dBW Co- or Cross Polar Mode C Service Area Description Service area is Alaska Max. Power Flux Density * 10° - * 15° - * 20° - * 25° - * 0° - 5° * 5° - 10° 15° 20° 25° 90° * (dbW/m2 (dbW/m2 (dbW/m2 (dbW/m2 (dbW/m2 (dbW/m2 BW: /BW): /BW): /BW): /BW): /BW): /BW):

1.0 -133.0 -133.0 -133.0 -133.0 -133.0 -133.0 MHz Transmitting Question Response Beams 7: Beam ID TLM Transmit Beam Frequency 19700.0 MHz -20200.0 MHz Beam Type Shapeable Polarization LHCP Peak Gain 47.3 dBi Antenna Pointing Error 0.1 degrees Antenna Rotational Error 0.1 degrees Polarization Switchable Polarization Alignment Relative to 45.0 degrees the Equatorial Plane Max. Transmit EIRP Density -24.7 dBW/Hz Max. Transmit EIRP 59.5 dBW Co- or Cross Polar Mode C Service Area Description Service area is within -6 dB contour of this double humped beam Max. Power Flux Density * 10° - * 15° - * 20° - * 25° - * 0° - 5° * 5° - 10° 15° 20° 25° 90° * (dbW/m2 (dbW/m2 (dbW/m2 (dbW/m2 (dbW/m2 (dbW/m2 BW: /BW): /BW): /BW): /BW): /BW): /BW): 1.0 -147.2 -142.2 -137.2 -127.2 -127.2 -133.2 MHz

Transmitting Center Channels (2) Channel Channel Frequency s Feeder Link, Service ID Bandwidth (MHz) (MHz) Link or TT&C TL03 62.5 19731.25 Service Link TL01 165.0 18447.5 Service Link

Certification Question Response Questions Are the applicable service area N/A coverage requirements of 25.143(b)(2) (ii) and (iii), or 25.144(a)(3)(i), or 25.145 (c)(1) and (2), or 25.146(i)(1) and (2), or 25.148(c), or 25.225 met? Are the applicable frequency Yes tolerances of 25.202(e) and out-of- band emission limits of 25.202(f)(1),(2), and (3) met? Are the cessation of emissions Yes requirements of 25.207 met? Are the applicable power-flux-density Yes limits of 25.208 met, and is the appropriate technical showing provided within the application? For NGSO applications, are the N/A applicable equivalent-power-flux- density limits of 25.208 met, and is the appropriate technical showing provided within the application? Are the applicable full-frequency-reuse Yes requirements of 25.210 met? If the application is for a 17/24 GHz BSS space station, will it be operated at an offset location with full power and interference protection in accordance with 25.262(b)?

Attachments File Attachment Name Beam Field Type Description CMD.gxt CMD GSO Antenna Gain GXT file (*.gxt) Contour Data TMLL. TLM GSO Antenna Gain GXT file (*.gxt) gxt Contour Data TX4R. TX4R GSO Antenna Gain GXT file (*.gxt) gxt Contour Data TX4L.gxt TX4L GSO Antenna Gain GXT file (*.gxt) Contour Data TX3R. TX3R GSO Antenna Gain GXT file (*.gxt) gxt Contour Data TX2R. TX2R GSO Antenna Gain GXT file (*.gxt) gxt Contour Data TX1R. TX1R GSO Antenna Gain GXT file (*.gxt) gxt Contour Data TX1L.gxt TX1L GSO Antenna Gain GXT file (*.gxt) Contour Data RX7L. RX7L GSO Antenna Gain GXT file (*.gxt) gxt Contour Data RX6L. RX6L GSO Antenna Gain GXT file (*.gxt) gxt Contour Data RX5R. RX5R GSO Antenna Gain GXT file (*.gxt) gxt Contour Data RX4R. RX4R GSO Antenna Gain GXT file (*.gxt) gxt Contour Data RX3R. RX3R GSO Antenna Gain GXT file (*.gxt) gxt Contour Data RX2R. RX2R GSO Antenna Gain GXT file (*.gxt) gxt Contour Data RX1R. RX1R GSO Antenna Gain GXT file (*.gxt) gxt Contour Data RX5L. RX5L GSO Antenna Gain GXT file (*.gxt) gxt Contour Data

RX4L. RX4L GSO Antenna Gain GXT file (*.gxt) gxt Contour Data RX3L. RX3L GSO Antenna Gain GXT file (*.gxt) gxt Contour Data RX2L. RX2L GSO Antenna Gain GXT file (*.gxt) gxt Contour Data RX1L. RX1L GSO Antenna Gain GXT file (*.gxt) gxt Contour Data


Document Created: 2017-09-12 16:17:06
Document Modified: 2017-09-12 16:17:06
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC