Attachment Sched S Tech Report.

This document pretains to SAT-MOD-20160722-00067 for Modification on a Satellite Space Stations filing.

IBFS_SATMOD2016072200067_1144719

Approved by OMD Control Number 3060-0678 Estimated Burden Hours: 80 FCC 312 FEDERAL COMMUNICATIONS COMMISSION Page 1: General, Schedule S SATELLITE SPACE STATION AUTHORIZATIONS Frequency Bands, (Technical and Operational Description) and GSO Orbit S1. GENERAL INFORMATION Complete for all satellite applications. a. Space Station or Satellite Network Name: e. Estimated Date of Placement into Service: i Will the space station(s) operate on a Common Carrier Basis: ECHOSTAR-18 N b. Construction Commencement Date: f. Estimated Lifetime of Satellite(s): j. Number of transponders offered on a common carrier basis: 15 Years c. Construction Completion Date: g. Total Number of Transponders: k. Total Common Carrier Transponder Bandwidth: MHz d1. Est Launch Date Begin: d2. Est Launch Date End: h. Total Transponder Bandwidth (no. transponders x Bandwidth) l. Orbit Type: Mark all boxes that apply: MHz GSO NGSO X S2. OPERATING FREQUENCY BANDS Identify the frequency range and transmit/receive mode for all frequency bands in which this station will oper Also indicate the nature of service(s) for each frequency band. Frequency Band Limits f. Lower Frequency (_Hz) Upper Frequency (_Hz) e. T/R Mode Nature of Service(s): List all that apply to this band a. Numeric b. Unit c. Numeric d. Unit (K/M/G) (K/M/G) 17302.5 M 17303.5 M R Space Operations Service 17793 M 17794 M R Space Operations Service 17790 M 17800 M R Space Operations Service 12202.5 M 12204.5 M T Space Operations Service 12690 M 12700 M T Space Operations Service S3. ORBITAL INFORMATION FOR GEOSTATIONARY SATELLITES ONLY: a. Nominal Orbital Longitude (Degrees E/W): b. Alternate Orbital Longitude (Degrees E/W): c. Reason for orbital location selection: 61.35 W Longitudinal Tolerance or E/W Station-Keeping: f. Inclination Excursion or Range of orbital are in which adequate service can be N/S Station-Keeping provided (Optional): d. Toward West: Degrees Degrees E/W 0.05 Tolerance: g. Westernmost: e. Toward East: 0.05 Degrees 0.05 Degrees h. Easternmost: i. Reason for service are selection (Optional):

FEDERAL COMMUNICATIONS COMMISSION Page 2: NGSO Orbits SATELLITE SPACE STATION AUTHORIZATIONS FCC Form 312 - Schedule S: (Technical and Operational Description) S4. ORBITAL INFORMATION FOR NON-GEOSTATIONARY SATELLITES ONLY S4a. Total Number of Satellites in Network or System: S4c. Celestial Reference Body (Earth, Sun, Moon, etc.): S4b. Total Number of Orbital Planes in Network or System: S4d. Orbit Epoch Date: For each Orbital Plane Provide: (e) Orbital (f) No. of (g) Inclination (h) Orbital (i) Apogee (km) (j) Perigee (km) (k) Right Ascension of (l) Argument of Active Service Arc Range (Degrees) Plane No. Satellites in Angle (degrees) Period the Ascending Node Perigee (m) Begin (n) End Angle (o) Other Plane (Seconds) (Deg.) (Degrees) Angle S5. INITIAL SATELLITE PHASE ANGLE For each satellite in each orbital plane, provide the intital phase angle. (a) Orbital (b) Satellite (c) Initial Plane No. Number Phase Angle (Degrees) NO NGSO DATA FILED

FEDERAL COMMUNICATIONS COMMISSION Page 3: Service Areas SATELLITE SPACE STATION AUTHORIZATIONS FCC Form 312 - Schedule S: (Technical and Operational Description) S6. SERVICE AREA CHARACTERISTICS for each service area provide: (a) Service Area (b) Type of Associated (c) Service Area Diagram (d) Service Area Description. Provide list of geographic areas (state postal codes or ITU 3-ltr codes), satellites or Figure No. of ID Station (Earth or File Name (GXT File) Service Area Diagram. Space) SA1 E CONUS SA2 E Visible Earth (Antenna gain varies by less than 8 dB across Earth)

FEDERAL COMMUNICATIONS COMMISSION Page 4: Antenna Beams SATELLITE SPACE STATION AUTHORIZATIONS FCC Form 312 - Schedule S: (Technical and Operational Description) S7. SPACE STATION ANTENNA BEAM CHARACTERISTICS For each antenna beam provide: (a) (b) Isotropic Antenna (e) (f) (g) Min. (h) Polar- (i) Polarization (j) Service Transmit Receive Beam T/R Gain Pointing Rotational Cross- ization Alignment Rel. Area ID (k) Input (l) Effective (m) (n) (o) G/T (p) Min. Input Attenuator (dB) ID Mode (c) Peak (d) Edge Error Error Polar Iso- Switch- Equatorial Losses Output Max. System Max. Saturation (Degrees) (Degrees) lation (dB) able? Plane (Degrees) (q) Max. (r) Step (dBi) (dBi) (dB) Power (W) EIRP Noice Gain Pt. Flux Density (Y/N) Value Size (dBW) Temp (k) (db/K) (dBW/m2) CMD R 0.12 30 N SA1 -17.4 -93 CMD R 0.12 30 N SA1 -17.4 -93 TLMR T 0.12 30 N SA1 14.3 TLML T 0.12 30 N SA1 14.3 OMN R 0.12 30 N SA2 -29.4 -83 OMN R 0.12 30 N SA2 -29.4 -83 OMN T 0.12 30 N SA2 14.6 OMN T 0.12 30 N SA5 14.6

FEDERAL COMMUNICATIONS COMMISSION Page 5: Beam Diagrams SATELLITE SPACE STATION AUTHORIZATIONS FCC Form 312 - Schedule S: (Technical and Operational Description) S8. ANTENNA BEAM DIAGRAMS For each beam pattern provide the reference to the graphic image and numerical data: Also provide the power flux density levels in each beam that result from the emission with the highest power flux density. (a) (b) (c) Co-or (d) GSO (e) NGSO Antenna Gain (f) GSO Antenna Gain Max. Power Flux Density (dBW/M2/Hz) Beam T/R Cross Ref. Orbital Contour Description Contour Data (GXT File) At Angle of Arrival above horizontal (for emission with highest PFD) ID Mode Polar Longitude (Figure/Table/ Exhibit) (g) 5 Deg (h) 10 Deg (i) 15 Deg (j) 20 Deg (k) 25 Deg Mode ("C" (Deg. E/W) or" X") CMD R C -61.35 CMDR.gxt CMD R C -61.35 CMDL.gxt TLMR T C -61.35 TLMR.gxt TLML T C -61.35 TLML.gxt

FEDERAL COMMUNICATIONS COMMISSION Page 6: Channels and SATELLITE SPACE STATION AUTHORIZATIONS Transponders FCC Form 312 - Schedule S: (Technical and Operational Description) S9. SPACE STATION CHANNELS For each frequency channel provide: S10. SPACE STATION TRANSPONDERS For each transponder provide: (a) (B) Assigned (c) (d) Center (e) (f) TTC (a) (b) Receive Band Transmit Band Channel Bandwidth T/R Frequency Polarization or Comm Transponder Transponder (c) Channel (d) Beam (e) Channel (f) Beam ID No. (kHz) Mode (MHz) (H, V, L, R) Channel (T ID Gain (dB) No. ID No. or C) CMD1 1000 R 17793.5 R T CMD1 CMD1 CMDR CMD2 1000 R 17303 L T CMD2 CMD2 CMDL CMD3 5000 R 17792.5 R T CMD3 CMD3 CMDR CMD4 5000 R 17797.5 R T CMD4 CMD4 CMDR TLM1 1000 T 12695 R T CMD5 CMD1 OMNUR TLM2 1000 T 12696 R T CMD6 CMD2 OMNUL TLM3 1000 T 12203 L T CMD7 CMD3 OMNUR TLM4 1000 T 12204 L T CMD8 CMD4 OMNUR TLM5 5000 T 12692.5 R T TLM1 TLM1 TLMR TLM6 5000 T 12697.5 R T TLM2 TLM2 TLMR TLM3 TLM3 TLML TLM4 TLM4 TLML TLM5 TLM5 TLMR TLM6 TLM6 TLMR TLM7 TLM1 OMNDR TLM8 TLM2 OMNDR TLM9 TLM3 OMNDL TLM10 TLM4 OMNDL TLM11 TLM5 OMNDR TLM12 TLM6 OMNDR

FEDERAL COMMUNICATIONS COMMISSION Page 7: Digital Modulation SATELLITE SPACE STATION AUTHORIZATIONS FCC Form 312 - Schedule S: (Technical and Operational Description) S11. DIGITAL MODULATION PARAMETERS For each digital emission provide: (a) Digital (b) Emission (c) Assigned (d) No. of (e)Uncoded (f) FEC Error (g) CDMA (h) Total C/N (i) Single Entry Mod. ID Designator Bandwidth Phases Data Rate Correction Processing Performance C/I Objective (kHz) (kbps) Coding Rate Gain (dB) Objective (dB) (dB)

FEDERAL COMMUNICATIONS COMMISSION Page 8: Analog Modulation SATELLITE SPACE STATION AUTHORIZATIONS FCC Form 312 - Schedule S: (Technical and Operational Description) S12. ANALOG MODULATION PARAMETERS For each analog emission provide: (a) (b) Emission (c) (d) Signal (e) Multi-channel Telephony (j) Video (k) Video (l) Video (m) SCPC/FM (n) Total C/N (o) Single Analog Designator Assigned Type Channels Standard Noise- and Compander, Performance Entry C/I (f) Ave. (g) Bottom (h) Top (i) RMS Mod. ID Bandwidth per Carrier NTSC, Weighting SCPC/FM Preemphasis, Objective Objective Companded Baseband Baseband Modulation (kHz) PAL, etc. (dB) Modulation and Noise (dB) (dB) Talker Level Freq. (MHz) Freq. (MHz) Index Index Weighting (dB) (dBm0) A1 1M00F2D 1000 A2 1M00G2D 1000

FEDERAL COMMUNICATIONS COMMISSION Page 9: Typical Emissions SATELLITE SPACE STATION AUTHORIZATIONS FCC Form 312 - Schedule S: (Technical and Operational Description) S13. TYPICAL EMISSIONS For each planned type of emission provide: Associated Modulation ID (e) Carriers (f) Carrier (g)Noise Budget (h) Energy Receive Band (Assoc. Transmit Stn) Transmit Band (This Space Station) Transponder ID Range per Spacing Reference (Table Dispersal (c) Digital (d) Analog (i)Assoc. Assoc. Station Transmit EIRP (dBW) (n) Max. Power (o)Assoc. Transponder (kHz) No.) Bandwidth (Table S11) (Table S12) Stn. Max. Power (dBW) Flux Density Stn Rec. (a) Start (b) End (kHz) Antenna (dBW/m2/Hz) G/T Gain (dBi) (j) Min. (k) Max. (l) Min. (m) Max. (dB/K) CMD1 CMD8 A1 TLM1 TLM6 A2 14.3 TLM7 TLM12 A2 14.6

FEDERAL COMMUNICATIONS COMMISSION Page 10: TT and C SATELLITE SPACE STATION AUTHORIZATIONS FCC Form 312 - Schedule S: (Technical and Operational Description) S14. Is the space station(s) controlled and monitored remotely? If Yes, provide the location and telephone number of the TT and C control point(s): No

FEDERAL COMMUNICATIONS COMMISSION Page 11: SATELLITE SPACE STATION AUTHORIZATIONS Characteristics and FCC Form 312 - Schedule S: (Technical and Operational Description) Certifications S15. SPACECRAFT PHYSICAL CHARACTERISTICS: S16. SPACECRAFT ELECTRICAL CHARACTERISTICS: S17. CERTIFICATIONS: a. Are the power flux density limits of § 25.208 met?: YES NO X N/A b. Are the appropriate service area coverage requirements of § 25.143(b)(ii) and (iii), or § 25.145(c)(1) and (2) met? YES NO X N/A c. Are the frequency tolerances of § 25.202(e) and the out-of-band emission limits of § 25.202(f)(1), (2) and (3) met? X YES NO N/A In addition to the information required in this Form, the space station applicant is required to provide all the information specified in Section 25.114 of the Commission's rules, 47 C.F.R § 25.114. FCC NOTICE REQUIRED BY THE PAPERWORK REDUCTION ACT The public reporting estimate for this collection of information includes the time for reviewing instructions, searching existing data sources, gathering and maintaining the required data, and completing and reviewing the collection of information. If you have any comments on this burden estimate, or how we can improve the collection and reduce the burden it causes you, please write to the Federal Communications Commission, AMD-PERM, Paperwork Reduction Project (3060-0678), Washington, DC 20554. We will also accept your comments regarding the Paperwork Reduction Act aspects of this collection via the Internet if you send them to PERM@fcc.gov. PLEASE DO NOT SEND COMPLETED FORMS TO THIS ADDRESS. Remember - You are not required to respond to a collection of information sponsored by the Federal government, and the government may not conduct or sponsor this collection, unless it displays a currently valid OMB control number or if we fail to provide you with this notice. This collection has been assigned an OMB control number of 3060-0678. THE FOREGOING NOTICE IS REQUIRED BY THE PAPERWORK REDUCTION ACT OF 1995, PUBLIC LAW 104-13, OCTOBER 1, 1995, 44 U.S.C. SECTION 3507.


Document Created: 2016-07-26 09:31:58
Document Modified: 2016-07-26 09:31:58
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC