Attachment Sched S Tech Report.

This document pretains to SAT-MOD-20150309-00010 for Modification on a Satellite Space Stations filing.

IBFS_SATMOD2015030900010_1081654

Approved by OMD Control Number 3060-0678 Estimated Burden Hours: 80 FCC 312 FEDERAL COMMUNICATIONS COMMISSION Page 1: General, Schedule S SATELLITE SPACE STATION AUTHORIZATIONS Frequency Bands, (Technical and Operational Description) and GSO Orbit S1. GENERAL INFORMATION Complete for all satellite applications. a. Space Station or Satellite Network Name: e. Estimated Date of Placement into Service: i Will the space station(s) operate on a Common Carrier Basis: AMC-7 N b. Construction Commencement Date: f. Estimated Lifetime of Satellite(s): j. Number of transponders offered on a common carrier basis: 20 Years 0 c. Construction Completion Date: g. Total Number of Transponders: k. Total Common Carrier Transponder Bandwidth: 24 0 MHz d1. Est Launch Date Begin: d2. Est Launch Date End: h. Total Transponder Bandwidth (no. transponders x Bandwidth) l. Orbit Type: Mark all boxes that apply: 864 MHz GSO NGSO X S2. OPERATING FREQUENCY BANDS Identify the frequency range and transmit/receive mode for all frequency bands in which this station will oper Also indicate the nature of service(s) for each frequency band. Frequency Band Limits f. Lower Frequency (_Hz) Upper Frequency (_Hz) e. T/R Mode Nature of Service(s): List all that apply to this band a. Numeric b. Unit c. Numeric d. Unit (K/M/G) (K/M/G) 5925 M 6425 M R Fixed Satellite Service 3700 M 4200 M T Fixed Satellite Service 3700 M 4200 M T Direct to Home in the Fixed Fixed Satellite Service S3. ORBITAL INFORMATION FOR GEOSTATIONARY SATELLITES ONLY: a. Nominal Orbital Longitude (Degrees E/W): b. Alternate Orbital Longitude (Degrees E/W): c. Reason for orbital location selection: 135 W Longitudinal Tolerance or E/W Station-Keeping: f. Inclination Excursion or Range of orbital are in which adequate service can be N/S Station-Keeping provided (Optional): d. Toward West: Degrees Degrees E/W 0.05 Tolerance: g. Westernmost: e. Toward East: 0.05 Degrees 0.05 Degrees h. Easternmost: i. Reason for service are selection (Optional):

FEDERAL COMMUNICATIONS COMMISSION Page 2: NGSO Orbits SATELLITE SPACE STATION AUTHORIZATIONS FCC Form 312 - Schedule S: (Technical and Operational Description) S4. ORBITAL INFORMATION FOR NON-GEOSTATIONARY SATELLITES ONLY S4a. Total Number of Satellites in Network or System: S4c. Celestial Reference Body (Earth, Sun, Moon, etc.): S4b. Total Number of Orbital Planes in Network or System: S4d. Orbit Epoch Date: For each Orbital Plane Provide: (e) Orbital (f) No. of (g) Inclination (h) Orbital (i) Apogee (km) (j) Perigee (km) (k) Right Ascension (l) Argument of Active Service Arc Range (Degrees) Plane No. Satellites in Angle (degrees) Period of the Ascending Perigee (m) Begin (n) End Angle (o) Other Plane (Seconds) Node (Deg.) (Degrees) Angle S5. INITIAL SATELLITE PHASE ANGLE For each satellite in each orbital plane, provide the intital phase angle. (a) Orbital (b) Satellite (c) Initial Plane No. Number Phase Angle (Degrees) NO NGSO DATA FILED

FEDERAL COMMUNICATIONS COMMISSION Page 3: Service Areas SATELLITE SPACE STATION AUTHORIZATIONS FCC Form 312 - Schedule S: (Technical and Operational Description) S6. SERVICE AREA CHARACTERISTICS for each service area provide: (a) Service Area (b) Type of Associated (c) Service Area Diagram (d) Service Area Description. Provide list of geographic areas (state postal codes or ITU 3-ltr codes), satellites or Figure No. of ID Station (Earth or File Name (GXT File) Service Area Diagram. Space) SA1 E -10 dB contours of uplink beams CUH and CUV SA2 E -10 dB contours of downlink beams CDH and CDV SA3 E Visible Earth

FEDERAL COMMUNICATIONS COMMISSION Page 4: Antenna Beams SATELLITE SPACE STATION AUTHORIZATIONS FCC Form 312 - Schedule S: (Technical and Operational Description) S7. SPACE STATION ANTENNA BEAM CHARACTERISTICS For each antenna beam provide: (a) (b) Isotropic Antenna (e) (f) (g) Min. (h) Polar- (i) Polarization (j) Service Transmit Receive Beam T/R Gain Pointing Rotational Cross- ization Alignment Rel. Area ID (k) Input (l) Effective (m) (n) (o) G/T (p) Min. Input Attenuator (dB) ID Mode (c) Peak (d) Edge Error Error Polar Iso- Switch- Equatorial Losses Output Max. System Max. Saturation (Degrees) (Degrees) lation (dB) able? Plane (Degrees) (q) Max. (r) Step (dBi) (dBi) (dB) Power (W) EIRP Noice Gain Pt. Flux Density (Y/N) Value Size (dBW) Temp (k) (db/K) (dBW/m2) CUH R 30.6 20.6 0.11 30 Y 0 SA1 3.9 -99.6 21 CUV R 29.5 19.5 0.11 30 Y 90 SA1 2.4 -98.5 21 CDH T 30.3 20.3 0.11 30 Y 0 SA2 43.1 CDV T 29.4 19.4 0.11 30 Y 90 SA2 42.4 HOR R 10.6 10.4 0.11 30 N 90 SA3 -23.4 -90 OMN R 9 -4 0.11 30 N 0 SA3 -28.8 -85 OMN R 9 -4 0.11 30 N 90 SA3 -28.8 -85 TLM1 T 30.3 20.3 0.11 30 N 0 SA2 12.3 TLM2 T 30.3 20.3 0.11 30 N 90 SA2 12.3 TLM3 T 29.4 19.4 0.11 30 N 0 SA2 11.4 TLM4 T 29.4 19.4 0.11 30 N 90 SA2 11.4 HOR T 10.6 10.4 0.11 30 N 90 SA3 -3 OMN T 9 -4 0.11 30 N 0 SA3 -5

FEDERAL COMMUNICATIONS COMMISSION Page 5: Beam Diagrams SATELLITE SPACE STATION AUTHORIZATIONS FCC Form 312 - Schedule S: (Technical and Operational Description) S8. ANTENNA BEAM DIAGRAMS For each beam pattern provide the reference to the graphic image and numerical data: Also provide the power flux density levels in each beam that result from the emission with the highest power flux density. (a) (b) (c) Co-or (d) GSO (e) NGSO Antenna Gain (f) GSO Antenna Max. Power Flux Density (dBW/M2/Hz) Beam T/R Cross Ref. Contour Description Gain Contour Data At Angle of Arrival above horizontal (for emission with highest PFD) ID Mode Polar Orbital (Figure/Table/ Exhibit) (GXT File) (g) 5 Deg (h) 10 Deg (i) 15 Deg (j) 20 Deg (k) 25 Deg Mode ("C" Longitude or" X") (Deg. E/W) CUH R C -135 CUH.gxt CUV R C -135 CUV.gxt CDH T C -135 CDH.gxt -152.1 -151.6 -151.1 -150.7 -150.5 CDV T C -135 CDV.gxt -152.1 -151.6 -151.1 -150.7 -150.5 TLM1 T C -135 TLM1H.gxt -168.1 -167.7 -167.2 -166.8 -166.6 TLM2 T C -135 TLM2V.gxt -168.1 -167.7 -167.2 -166.8 -166.6 TLM3 T C -135 TLM3H.gxt -169 -168.6 -168.1 -167.7 -167.5 TLM4 T C -135 TLM4V.gxt -169 -168.6 -168.1 -167.7 -167.5 HOR T C -135 -181.9 -181.9 -181.9 -181.9 -181.9 OMN T C -135 -183.9 -183.9 -183.9 -183.9 -183.9

FEDERAL COMMUNICATIONS COMMISSION Page 6: Channels and SATELLITE SPACE STATION AUTHORIZATIONS Transponders FCC Form 312 - Schedule S: (Technical and Operational Description) S9. SPACE STATION CHANNELS For each frequency channel provide: S10. SPACE STATION TRANSPONDERS For each transponder provide: (a) (B) Assigned (c) (d) Center (e) (f) TTC (a) (b) Receive Band Transmit Band Channel Bandwidth T/R Frequency Polarization or Comm Transponder Transponder (c) Channel (d) Beam (e) Channel (f) Beam ID No. (kHz) Mode (MHz) (H, V, L, R) Channel (T ID Gain (dB) No. ID No. or C) CU001 36000 R 5945 H C T0001 1 CU001 CUH CD001 CDV CU003 36000 R 5985 H C T0003 1 CU003 CUH CD003 CDV CU005 36000 R 6025 H C T0005 1 CU005 CUH CD005 CDV CU007 36000 R 6065 H C T0007 1 CU007 CUH CD007 CDV CU009 36000 R 6105 H C T0009 1 CU009 CUH CD009 CDV CU011 36000 R 6145 H C T0011 1 CU011 CUH CD011 CDV CU013 36000 R 6185 H C T0013 1 CU013 CUH CD013 CDV CU015 36000 R 6225 H C T0015 1 CU015 CUH CD015 CDV CU017 36000 R 6265 H C T0017 1 CU017 CUH CD017 CDV CU019 36000 R 6305 H C T0019 1 CU019 CUH CD019 CDV CU021 36000 R 6345 H C T0021 1 CU021 CUH CD021 CDV CU023 36000 R 6385 H C T0023 1 CU023 CUH CD023 CDV CU002 36000 R 5965 V C T0002 1 CU002 CUV CD002 CDH CU004 36000 R 6005 V C T0004 1 CU004 CUV CD004 CDH CU006 36000 R 6045 V C T0006 1 CU006 CUV CD006 CDH CU008 36000 R 6085 V C T0008 1 CU008 CUV CD008 CDH CU010 36000 R 6125 V C T0010 1 CU010 CUV CD010 CDH CU012 36000 R 6165 V C T0012 1 CU012 CUV CD012 CDH CU014 36000 R 6205 V C T0014 1 CU014 CUV CD014 CDH CU016 36000 R 6245 V C T0016 1 CU016 CUV CD016 CDH CU018 36000 R 6285 V C T0018 1 CU018 CUV CD018 CDH CU020 36000 R 6325 V C T0020 1 CU020 CUV CD020 CDH CU022 36000 R 6365 V C T0022 1 CU022 CUV CD022 CDH CU024 36000 R 6405 V C T0024 1 CU024 CUV CD024 CDH CU025 36000 R 5945 V C T0025 1 CU025 CUV CD025 CDH CU027 36000 R 5985 V C T0027 1 CU027 CUV CD027 CDH CU029 36000 R 6025 V C T0029 1 CU029 CUV CD029 CDH CU031 36000 R 6065 V C T0031 1 CU031 CUV CD031 CDH CU033 36000 R 6105 V C T0033 1 CU033 CUV CD033 CDH CU035 36000 R 6145 V C T0035 1 CU035 CUV CD035 CDH

CU037 36000 R 6185 V C T0037 1 CU037 CUV CD037 CDH CU039 36000 R 6225 V C T0039 1 CU039 CUV CD039 CDH CU041 36000 R 6265 V C T0041 1 CU041 CUV CD041 CDH CU043 36000 R 6305 V C T0043 1 CU043 CUV CD043 CDH CU045 36000 R 6345 V C T0045 1 CU045 CUV CD045 CDH CU047 36000 R 6385 V C T0047 1 CU047 CUV CD047 CDH CU026 36000 R 5965 H C T0026 1 CU026 CUH CD026 CDV CU028 36000 R 6005 H C T0028 1 CU028 CUH CD028 CDV CU030 36000 R 6045 H C T0030 1 CU030 CUH CD030 CDV CU032 36000 R 6085 H C T0032 1 CU032 CUH CD032 CDV CU034 36000 R 6125 H C T0034 1 CU034 CUH CD034 CDV CU036 36000 R 6165 H C T0036 1 CU036 CUH CD036 CDV CU038 36000 R 6205 H C T0038 1 CU038 CUH CD038 CDV CU040 36000 R 6245 H C T0040 1 CU040 CUH CD040 CDV CU042 36000 R 6285 H C T0042 1 CU042 CUH CD042 CDV CU044 36000 R 6325 H C T0044 1 CU044 CUH CD044 CDV CU046 36000 R 6365 H C T0046 1 CU046 CUH CD046 CDV CU048 36000 R 6405 H C T0048 1 CU048 CUH CD048 CDV CD001 36000 T 3720 V C CMD1 CMD1 HORN1 CD003 36000 T 3760 V C CMD2 CMD2 OMNUH CD005 36000 T 3800 V C CMD3 CMD3 OMNUV CD007 36000 T 3840 V C TLM1 TLM1 TLM1H CD009 36000 T 3880 V C TLM2 TLM2 TLM2V CD011 36000 T 3920 V C TLM3 TLM3 TLM3H CD013 36000 T 3960 V C TLM4 TLM4 TLM4V CD015 36000 T 4000 V C TLM5 TLM5 HORN2 CD017 36000 T 4040 V C TLM6 TLM6 HORN2 CD019 36000 T 4080 V C TLM7 TLM7 OMNDH CD021 36000 T 4120 V C TLM8 TLM8 OMNDH CD023 36000 T 4160 V C CD002 36000 T 3740 H C CD004 36000 T 3780 H C CD006 36000 T 3820 H C CD008 36000 T 3860 H C CD010 36000 T 3900 H C CD012 36000 T 3940 H C CD014 36000 T 3980 H C CD016 36000 T 4020 H C CD018 36000 T 4060 H C

CD020 36000 T 4100 H C CD022 36000 T 4140 H C CD024 36000 T 4180 H C CD025 36000 T 3720 H C CD027 36000 T 3760 H C CD029 36000 T 3800 H C CD031 36000 T 3840 H C CD033 36000 T 3880 H C CD035 36000 T 3920 H C CD037 36000 T 3960 H C CD039 36000 T 4000 H C CD041 36000 T 4040 H C CD043 36000 T 4080 H C CD045 36000 T 4120 H C CD047 36000 T 4160 H C CD026 36000 T 3740 V C CD028 36000 T 3780 V C CD030 36000 T 3820 V C CD032 36000 T 3860 V C CD034 36000 T 3900 V C CD036 36000 T 3940 V C CD038 36000 T 3980 V C CD040 36000 T 4020 V C CD042 36000 T 4060 V C CD044 36000 T 4100 V C CD046 36000 T 4140 V C CD048 36000 T 4180 V C CMD1 800 R 6423.5 V T CMD2 800 R 6423.5 H T CMD3 800 R 6423.5 V T TLM1 300 T 3700.5 H T TLM2 300 T 3700.5 V T TLM3 300 T 4199.5 H T TLM4 300 T 4199.5 V T TLM5 300 T 3700.5 V T TLM6 300 T 4199.5 V T TLM7 300 T 3700.5 H T TLM8 300 T 4199.5 H T

FEDERAL COMMUNICATIONS COMMISSION Page 7: Digital Modulation SATELLITE SPACE STATION AUTHORIZATIONS FCC Form 312 - Schedule S: (Technical and Operational Description) S11. DIGITAL MODULATION PARAMETERS For each digital emission provide: (a) Digital (b) Emission (c) Assigned (d) No. of (e)Uncoded (f) FEC Error (g) CDMA (h) Total C/N (i) Single Entry Mod. ID Designator Bandwidth Phases Data Rate Correction Processing Performance C/I Objective (kHz) (kbps) Coding Rate Gain (dB) Objective (dB) (dB) D1 48K6G7W 48.6 D2 1M69G7W 1688 D3 6M33G7W 6330 D4 18M2G7W 18200 D5 36M0G7W 36000 D6 36M0G7W 36000

FEDERAL COMMUNICATIONS COMMISSION Page 8: Analog Modulation SATELLITE SPACE STATION AUTHORIZATIONS FCC Form 312 - Schedule S: (Technical and Operational Description) S12. ANALOG MODULATION PARAMETERS For each analog emission provide: (a) (b) Emission (c) (d) Signal (e) Multi-channel Telephony (j) Video (k) Video (l) Video (m) SCPC/FM (n) Total C/N (o) Single Analog Designator Assigned Type Channels Standard Noise- and Compander, Performance Entry C/I (f) Ave. (g) Bottom (h) Top (i) RMS Mod. ID Bandwidth per Carrier NTSC, Weighting SCPC/FM Preemphasis, Objective Objective Companded Baseband Baseband Modulation (kHz) PAL, etc. (dB) Modulation and Noise (dB) (dB) Talker Level Freq. (MHz) Freq. (MHz) Index Index Weighting (dB) (dBm0) A1 36M0F3F 36000 A2 800KF2D 800 A3 300KG2D 300

FEDERAL COMMUNICATIONS COMMISSION Page 9: Typical Emissions SATELLITE SPACE STATION AUTHORIZATIONS FCC Form 312 - Schedule S: (Technical and Operational Description) S13. TYPICAL EMISSIONS For each planned type of emission provide: Associated Modulation ID (e) Carriers (f) Carrier (g)Noise Budget (h) Energy Receive Band (Assoc. Transmit Stn) Transmit Band (This Space Station) Transponder ID Range per Spacing Reference (Table Dispersal (c) Digital (d) Analog (i)Assoc. Assoc. Station Transmit EIRP (dBW) (n) Max. Power (o)Assoc. Transponder (kHz) No.) Bandwidth (Table S11) (Table S12) Stn. Max. Power (dBW) Flux Density Stn Rec. (a) Start (b) End (kHz) Antenna (dBW/m2/Hz) G/T Gain (dBi) (j) Min. (k) Max. (l) Min. (m) Max. (dB/K) T0001 T0048 D1 LB1.doc 15.1 T0001 T0048 D2 LB2.doc 27.7 T0001 T0048 D3 LB3.doc 34 T0001 T0048 D4 LB4.doc 42.6 T0001 T0048 D5 LB5.doc 43.1 T0001 T0048 D6 LB6.doc 43.1 T0001 T0048 A1 LB7.doc 39.6 CMD1 CMD1 A2 CMD2 CMD3 A2 TLM1 TLM2 A3 12.3 TLM3 TLM4 A3 11.4 TLM5 TLM6 A3 -3 TLM7 TLM8 A3 -5

FEDERAL COMMUNICATIONS COMMISSION Page 10: TT and C SATELLITE SPACE STATION AUTHORIZATIONS FCC Form 312 - Schedule S: (Technical and Operational Description) S14. Is the space station(s) controlled and monitored remotely? If Yes, provide the location and telephone number of the TT and C control point(s): Yes

FEDERAL COMMUNICATIONS COMMISSION Page 11: SATELLITE SPACE STATION AUTHORIZATIONS Characteristics and FCC Form 312 - Schedule S: (Technical and Operational Description) Certifications S15. SPACECRAFT PHYSICAL CHARACTERISTICS: S16. SPACECRAFT ELECTRICAL CHARACTERISTICS: S17. CERTIFICATIONS: a. Are the power flux density limits of § 25.208 met?: X YES NO N/A b. Are the appropriate service area coverage requirements of § 25.143(b)(ii) and (iii), or § 25.145(c)(1) and (2) met? YES NO X N/A c. Are the frequency tolerances of § 25.202(e) and the out-of-band emission limits of § 25.202(f)(1), (2) and (3) met? X YES NO N/A In addition to the information required in this Form, the space station applicant is required to provide all the information specified in Section 25.114 of the Commission's rules, 47 C.F.R § 25.114. FCC NOTICE REQUIRED BY THE PAPERWORK REDUCTION ACT The public reporting estimate for this collection of information includes the time for reviewing instructions, searching existing data sources, gathering and maintaining the required data, and completing and reviewing the collection of information. If you have any comments on this burden estimate, or how we can improve the collection and reduce the burden it causes you, please write to the Federal Communications Commission, AMD-PERM, Paperwork Reduction Project (3060-0678), Washington, DC 20554. We will also accept your comments regarding the Paperwork Reduction Act aspects of this collection via the Internet if you send them to PERM@fcc.gov. PLEASE DO NOT SEND COMPLETED FORMS TO THIS ADDRESS. Remember - You are not required to respond to a collection of information sponsored by the Federal government, and the government may not conduct or sponsor this collection, unless it displays a currently valid OMB control number or if we fail to provide you with this notice. This collection has been assigned an OMB control number of 3060-0678. THE FOREGOING NOTICE IS REQUIRED BY THE PAPERWORK REDUCTION ACT OF 1995, PUBLIC LAW 104-13, OCTOBER 1, 1995, 44 U.S.C. SECTION 3507.


Document Created: 2015-03-30 15:42:21
Document Modified: 2015-03-30 15:42:21
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC