USERS MANUAL

FCC ID: ZZH-MWS

Users Manual

Download: PDF
FCCID_1686293

INSTALLATION INSTRUCTIONS MWS-120,MWS-240  time. LED blinking rapidly, solid On and Off . After 5 minutes , LED COMPONENTS becomes solid On , Self Test Mode is finished. If LED is off at this time, Smart AC Switching Control Receptacle open or close the door ,LED turns On. Smart Decorator Duplex Receptacle Confirming Test: (MWS-RSC-120, and MWS-RSC-240) Make sure transmit device is not detecting anyone, close and open the door , keep the door open for the next 15 minutes , LED turns Off between 10 to 15 minutes.Test complete. Indicator Function Button  CODE LEARNING MODE Controlled Receptacle Factory Default: MWS-120 MWS-240 The codes are factory preset in a package. However, if there is a need 120 Vac of code match, push the Function button for more than 5 seconds, LED will become blinking, in the next 30 seconds, transmit device's LED Smart turns solid,code is matched.  SPECIFICATION Receptacle Note: once a new code in , the old code will be erased in the Smart Voltage(MWS-120)............................................................120VAC,60Hz receptacle. Voltage(MWS-240)............................................................240VAC,60Hz Load Rating........................................................................................20A  TROUBLE SHOOTING Operating temperature........................................................30°F to 120°F Indicator Relative Humidity........................................20% to 90% non-condensing Function Button LED on Receptacle keep flashing: Operating Frequency...................................................................315MHz Controlled Receptacle Run Self Test Mode, if end of batteries , replace them. Reception Sensitivity..................................................................-105dBm Wireless Transmitting current.........................................................40 mA Power Off 15 minutes even if occupancy: Max Wireless Range(direct)................................................within 20 feet 240 Vac RF signal is blocked from the transmit device to the receptacle Smart Receptacle Power On 10-15 minutes even if vacancy: Figure 1 RF signal is blocked from the transmit device to the receptacle  FEATURE Receptacle can not recognize signals from Sensor: Flush mount 20A Smart Receptacle This flush wall mount wiring device meets all the fire and building code Refer to the CODE LEARNING MODE. Constant System Self Testing as a receptacle for air conditioner , electric heater, and fan coil for air Side wired only conditioning . It receives and processes signals from transmit device, make and break the circuit base on occupancy or vacancy of the room. Have code function to ensure the uniqueness of device control  WARRANTY INFORMATION One controlled receptacle Installation : Connect Hot Line wire to Black screw terminal,Neutral to Both are tamper resistant receptacles White screw Terminal, Ground to Green screw terminal. Our company warranties its products to be free of defects in materials and workmanship for a period of two (2) years. There are no obligations or liabilities on the part of our company for consequential damages  DESCRIPTION arising out of or in connection with the use or performance of this product  TESTING or other indirect damages with respect to loss of property, revenue , or Energy is the basic power for ensuring the working of all machines.To Warming Up: profit ,or cost of removal, installation or reinstallation. save energy and decrease the daily consumption means that the oper- -ation cost will be reduced and the profit will raise. The air conditioner’s After connecting power to Smart Receptacle , there are 40 seconds energy consumption takes up a majority of the total energy consumption. warming up time. Feb,2012 Therefore s set of energy-saving air conditioning control system is fairly When both LEDs of Smart Receptacle and transmit devices flash twice. essential. If not, go to Code Learn Mode. The air conditioning auto control system is made up of three parts: two Self Test Mode: transmit devices and one receive smart receptacle, each of which communicates wireless with the receptacle in a single room, to control Push the Function button on Smart Receptacle only once, LED blinks the air conditioning auto on/auto off, then can save energy and make once , the system is now Self Test mode, do not plug in the load at this the air conditioner more intelligent. -01- -02- -03-

FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.


Document Created: 2012-04-24 17:27:22
Document Modified: 2012-04-24 17:27:22
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC