RF Expsoure Report

FCC ID: ZZ2AMC016

RF Exposure Info

Download: PDF
FCCID_3584441

             Cerpass Technology Corporation Test Laboratory                     Report No.: SEDL1708003




                            FCC/ IC TEST REPORT
                                      According to
                       FCC CFR Title 47 Part 15 Subpart C (15.247)

     Applicant         :    Amcrest Technologies LLC
     Address           :    16727 Park Row Dr.Houston, TX 77084
     Manufacturer :         Zhejiang Dahua Vision Technology Co., Ltd.
     Address           :    No.1199, Bin’an road, Binjiang District, Hangzhou,P.R.China.
     Equipment         :    960P/1.3MP Fixed Wireless IP Camera
     Model No.         :    IPM-HX1B ,IPM-HX1W
     FCC ID            :    ZZ2AMC016
     IC ID             :    21923-AMC016
     Test Period       :    Jul.18,2017~ Jul.31, 2017


     The test result refers exclusively to the test presented test model / sample.
     Without written approval of Cerpass Technology Corporation Test Laboratory. the test
    report shall not be reproduced exc- ept in full.
     The test report must not be used by the clients to claim product certification approval by any
    agency of the Government.

    I HEREBY CERTIFY THAT :
    The measurements shown in this test report were made in accordance with the procedures
    given in ANSI C63.10 – 2013&RSS-247,Issue 2&RSS-Gen&FCC Part15.247and the energy
    emitted by this equipment was passed.


     Approved by:                          Laboratory Accreditation:


                                                       Cerpass Technology Corporation Test Laboratory
                                                        TAF LAB Code:                 1439
      Mark Liao / Assistant Manager




                                                                                                         h
Cerpass Technology Corporation Test Laboratory                                    Issued Date : Aug.07 ,2017
Report format Revision 01                                                         Page No.    : 1 of 4


           Cerpass Technology Corporation Test Laboratory               Report No.: SEDL1708003


 Radio Frequency Exposure
 LIMIT

 For 2.4G Band: According to §15.247(i), systems operating under the provisions of this section shall
 be operated in a manner that ensures that the public is not exposed to radio frequency energy levels
 in excess of the Commission's guidelines. See § 1.1307(b)(1) of this chapter.




                                                                                                 h
Cerpass Technology Corporation Test Laboratory                            Issued Date : Aug.07 ,2017
Report format Revision 01                                                 Page No.    : 2 of 4


           Cerpass Technology Corporation Test Laboratory                 Report No.: SEDL1708003


 EUT Specification
  EUT                           960P/1.3MP Fixed Wireless IP Camera
  Frequency band
                                   WLAN: 2.412GHz ~ 2.462GHz
  (Operating)
                                   Portable (<20cm separation)
  Device category
                                   Mobile (>20cm separation)
                                   Occupational/Controlled exposure (S = 5mW/cm2)
  Exposure classification          General Population/Uncontrolled exposure
                                   (S=1mW/cm2)
                                   Single antenna
                                   Multiple antennas
  Antenna diversity                Tx diversity
                                   Rx diversity
                                   Tx/Rx diversity
                                IEEE802.11b: 22.42 dBm (0.1746W)
  Max. output power for         IEEE802.11g: 18.46 dBm (0.0701W)
  2.4G Band                     IEEE802.11n HT20: 18.99 dBm (0.0793W)
                                IEEE802.11n HT40: 16.99 dBm (0.0500W)
  Antenna gain (Max)            6.12 dBi for 2.4G Band
                                    MPE Evaluation*
  Evaluation applied                SAR Evaluation
                                    N/A
 Remark:
 1. The maximum output power is 22.42dBm (0.174582W) at 2437MHz (with numeric 4.09antenna
    gain.) for2.4G band
 2. DTS device is not subject to routine RF evaluation; MPE estimate is used to justify the compliance.
 3. For mobile or fixed location transmitters, no SAR consideration applied. The maximum power
    density is 1.0 mW/cm2 even if the calculation indicates that the power density would be larger.
 *Note: Simultaneous transmission is not applicable for this EUT.




                                                                                                    h
Cerpass Technology Corporation Test Laboratory                               Issued Date : Aug.07 ,2017
Report format Revision 01                                                    Page No.    : 3 of 4


           Cerpass Technology Corporation Test Laboratory                     Report No.: SEDL1708003


 TEST RESULTS FOR 2.4G BAND


 No non-compliance noted.

 Calculation
               30  P  G       E2
 Given      E            & S
                   d           3770
            Where     E = Field strength in Volts / meter
                      P = Power in Watts
                      G = Numeric antenna gain
                      d = Distance in meters
                      S = Power density in milliwatts / square centimeter
 Combining equations and re-arranging the terms to express the distance as a function of the
 remaining variables yields:
                 30  P  G
            S
                  3770d 2

 Changing to units of mW and cm, using:

            P (mW) = P (W) / 1000 and
            d (cm) = d(m) / 100
 Yields
                 30  P / 1000  G           PG
            S                        0.0796  2          Equation 1
                  3770  d / 100
                                   2
                                                d

            Where
               d = Distance in cm
               P = Power in mW
               G = Numeric antenna gain
               S = Power density in mW / cm2
 Maximum Permissible Exposure

                                         Max. Conducted                                Power
                            Frequency                      Antenna     Distance                      Limit
    Modulation Mode                          output                                   density
                            band (MHz)                    gain (dBi)     (cm)                      (mW/cm2)
                                          power(dBm)                                 (mW/cm2)

     IEEE802.11b            2412-2462        22.42          6.12         20            0.14              1
     IEEE802.11g            2412-2462        18.46          6.12         20            0.06              1
  IEEE802.11n HT20          2412-2462        18.99          6.12         20            0.06              1
  IEEE802.11n HT40          2422-2452        16.99          6.12         20            0.04              1




                                                                                                         h
Cerpass Technology Corporation Test Laboratory                                    Issued Date : Aug.07 ,2017
Report format Revision 01                                                         Page No.    : 4 of 4



Document Created: 2017-09-08 06:34:31
Document Modified: 2017-09-08 06:34:31

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC