Test Report

FCC ID: ZYPE561

Test Report

Download: PDF
FCCID_1571274

FCC PART 22H, PART 24E TEST REPORT For Nexpro International Limitada San Jose-Goicoechea, Guadalupe, Barrio Tournon, Frente Al Hotel Villas Tournon, Oficinas Del Bufete Facio Y Canas, Costa Rica FCC ID: ZYPE561 Report Type: Product Type: Original Report GSM Mobile Phone Test Engineer: Walt Kang Report Number: RDG110916005-00B Report Date: 2011-10-25 Merry Zhao Reviewed By: EMC Engineer Test Laboratory: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F, the 3rd Phase of WanLi Industrial Building, ShiHua Road, FuTian Free Trade Zone Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP*, or any agency of the Federal Government. * This report contains data that are not covered by the NVLAP accreditation and are marked with an asterisk “★” (Rev.2)

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RDG110916005-00B TABLE OF CONTENTS GENERAL INFORMATION .......................................................................................................................................4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) .....................................................................................4 OBJECTIVE ...................................................................................................................................................................4 RELATED SUBMITTAL(S)/GRANT(S) .............................................................................................................................4 TEST METHODOLOGY ..................................................................................................................................................4 TEST FACILITY .............................................................................................................................................................5 SYSTEM TEST CONFIGURATION ..........................................................................................................................6 JUSTIFICATION .............................................................................................................................................................6 EQUIPMENT MODIFICATIONS .......................................................................................................................................6 LOCAL SUPPORT EQUIPMENT LIST AND DETAILS ........................................................................................................6 CONFIGURATION OF TEST SETUP .................................................................................................................................6 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................7 SUMMARY OF TEST RESULTS ...............................................................................................................................8 FCC §1.1307 & §2.1093 - RF EXPOSURE..................................................................................................................9 APPLICABLE STANDARD ..............................................................................................................................................9 TEST RESULT ...............................................................................................................................................................9 FCC §2.1047 - MODULATION CHARACTERISTIC ............................................................................................10 FCC §2.1046, §22.913 (A) & §24.232 (C) - RF OUTPUT POWER .........................................................................11 APPLICABLE STANDARD ............................................................................................................................................11 TEST PROCEDURE ......................................................................................................................................................11 TEST EQUIPMENT LIST AND DETAILS .........................................................................................................................11 TEST DATA ................................................................................................................................................................12 FCC §2.1049, §22.917, §22.905 & §24.238 - OCCUPIED BANDWIDTH ..............................................................14 APPLICABLE STANDARD ............................................................................................................................................14 TEST PROCEDURE ......................................................................................................................................................14 TEST EQUIPMENT LIST AND DETAILS .........................................................................................................................14 TEST DATA ................................................................................................................................................................14 FCC §2.1051, §22.917(A) & §24.238(A) - SPURIOUS EMISSIONS AT ANTENNA TERMINALS ..................18 APPLICABLE STANDARD ............................................................................................................................................18 TEST PROCEDURE ......................................................................................................................................................18 TEST EQUIPMENT LIST AND DETAILS .........................................................................................................................18 TEST DATA ................................................................................................................................................................18 FCC §2.1053, §22.917 & §24.238 - SPURIOUS RADIATED EMISSIONS ...........................................................21 APPLICABLE STANDARD ............................................................................................................................................21 TEST PROCEDURE ......................................................................................................................................................21 TEST EQUIPMENT LIST AND DETAILS .........................................................................................................................21 TEST DATA ................................................................................................................................................................22 FCC §22.917(A) & §24.238(A) - BAND EDGES .......................................................................................................24 APPLICABLE STANDARD ............................................................................................................................................24 TEST PROCEDURE ......................................................................................................................................................24 TEST EQUIPMENT LIST AND DETAILS .........................................................................................................................24 TEST DATA ................................................................................................................................................................24 FCC Part 22H/24E Page 2 of 30

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RDG110916005-00B FCC §2.1055, §22.355 & §24.235 - FREQUENCY STABILITY .............................................................................28 APPLICABLE STANDARD ............................................................................................................................................28 TEST PROCEDURE ......................................................................................................................................................28 TEST EQUIPMENT LIST AND DETAILS .........................................................................................................................29 TEST DATA ................................................................................................................................................................29 FCC Part 22H/24E Page 3 of 30

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RDG110916005-00B GENERAL INFORMATION Product Description for Equipment under Test (EUT) The Nexpro International Limitada’s product, model number: E561 (FCC ID: ZYPE561) (the "EUT") in this report is a GSM Mobile Phone, which was measured approximately: 11.6 cm (L) x 6.4 cm (W) x 1.4 cm (H), rated input voltage: DC 3.7V battery ADAPTADOR ca/cc ENTRADA: 100-240Vca 50/60 Hz 120mA SALIDA: 5.2Vcc 500mA Frequency Range: Cellular Band: 824-849 MHz (Tx), 869-894 MHz (Rx) PCS Band: 1850-1910 MHz (Tx), 1930-1990 MHz (Rx) Bluetooth: 2402-2480 MHz (Tx/Rx) Wi-Fi: 2412-2462 MHz (Tx/Rx) Modulation Mode: GMSK (Cellular/PCS); GFSK (Bluetooth); Wi-Fi (DSSS/OFDM) Transmitter Output Power: Cellular Band: 33 dBm, PCS Band: 30 dBm Bluetooth: 9 dBm, Wi-Fi: 17.12 dBm * All measurement and test data in this report was gathered from production sample serial number: 1108077 (Assigned by BACL, Shenzhen). The EUT was received on 2011-09-16. Objective This report is prepared on behalf of Nexpro International Limitada in accordance with Part 2, Subpart J, Part 22 Subpart H, and Part 24 Subpart E of the Federal Communication Commissions rules. The objective is to determine compliance with FCC rules for output power, modulation characteristic, occupied bandwidth, and spurious emission at antenna terminal, spurious radiated emission, frequency stability, band edge and radiated margin. Related Submittal(s)/Grant(s) FCC Part 15B JBP, Part 15.247 DSS, DTS submissions with FCC ID: ZYPE561. Test Methodology All tests and measurements indicated in this document were performed in accordance with the Code of Federal Regulations Title 47 Part 2, Sub-part J as well as the following parts: Part 22 Subpart H - Public Mobile Services Part 24 Subpart E - Personal Communication Services Applicable Standards: TIA/EIA 603-C, ANSI C63.4-2009. All radiated and conducted emissions measurements were performed at Bay Area Compliance Laboratories Corp. The radiated testing was performed at an antenna-to-EUT distance of 3 meters. FCC Part 22H/24E Page 4 of 30

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RDG110916005-00B The uncertainty of any RF tests which use conducted method measurement is ±0.96 dB, the uncertainty of any radiation on emissions measurement is ±4.0 dB Test Facility The Test site used by Bay Area Compliance Laboratories Corp.(Shenzhen) to collect test data is located on the 6/F, the 3rd Phase of WanLi Industrial Building, ShiHua Road, FuTian Free Trade Zone Shenzhen, Guangdong, China. Test site at Bay Area Compliance Laboratories Corp. (Shenzhen) has been fully described in reports submitted to the Federal Communication Commission (FCC). The details of these reports have been found to be in compliance with the requirements of Section 2.948 of the FCC Rules on December 06, 2010. The facility also complies with the radiated and AC line conducted test site criteria set forth in ANSI C63.4-2009. The Federal Communications Commission has the reports on file and is listed under FCC Registration No.: 382179. The test site has been approved by the FCC for public use and is listed in the FCC Public Access Link (PAL) database. Additionally, Bay Area Compliance Laboratories Corp. (Shenzhen) is an ISO/IEC 17025 accredited laboratory, and is accredited by National Voluntary Laboratory Accredited Program (Lab Code 200707-0). The current scope of accreditations can be found at http://ts.nist.gov/Standards/scopes/2007070.htm FCC Part 22H/24E Page 5 of 30

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RDG110916005-00B SYSTEM TEST CONFIGURATION Justification The EUT was configured for testing according to TIA/EIA-603-C. The GSM/PCS item test was performed with the EUT operating at normal mode. The GPRS item test was performed with the EUT operating at engineering mode. Equipment Modifications No modifications were made to the EUT. Local Support Equipment List and Details Manufacturer Description Model Serial Number Universal Radio Communication R&S CMU200 109038 Tester Configuration of Test Setup Horn CMU200 Antenna EUT FCC Part 22H/24E Page 6 of 30

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RDG110916005-00B Block Diagram of Test Setup CMU200 Horn AC Power Antenna 1.0 Meter EUT Non-Conductive Table 150 cm above Ground Plane 1.5 Meter FCC Part 22H/24E Page 7 of 30

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RDG110916005-00B SUMMARY OF TEST RESULTS FCC Rules Description of Test Result §1.1307, §2.1093 RF Exposure (SAR) Compliance* §2.1046; RF Output Power Compliance §22.913 (a); §24.232 (c) §2.1047 Modulation Characteristics N/A §2.1049; §22.905 99% & 26 dB Occupied Bandwidth Compliance §22.917; §24.238 §2.1051, Spurious Emissions at Antenna Terminal Compliance §22.917(a); §24.238(a) §2.1053 Field Strength of Spurious Radiation Compliance §22.917(a); §24.238(a) §22.917(a); §24.238(a) Out of band emission, Band Edge Compliance §2.1055 Frequency stability vs. temperature Compliance §22.355; §24.235 Frequency stability vs. voltage Note: * Please refer to SAR report released by BACL, report number: RDG110916005-20. FCC Part 22H/24E Page 8 of 30

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RDG110916005-00B FCC §1.1307 & §2.1093 - RF EXPOSURE Applicable Standard FCC §1.1307 and §2.1093. Test Result Compliance, please refer to the SAR repot: RDG110916005-20. FCC Part 22H/24E Page 9 of 30

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RDG110916005-00B FCC §2.1047 - MODULATION CHARACTERISTIC According to FCC §2.1047(d), Part 22H & 24E there is no specific requirement for digital modulation, therefore modulation characteristic is not presented. FCC Part 22H/24E Page 10 of 30

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RDG110916005-00B FCC §2.1046, §22.913 (a) & §24.232 (c) - RF OUTPUT POWER Applicable Standard According to FCC §2.1046 and §22.913 (a), the ERP of mobile transmitters and auxiliary test transmitters must not exceed 7 watts. According to FCC §2.1046 and §24.232 (C), mobile and portable stations are limited to 2 watts EIRP and the equipment must employ a means for limiting power to the minimum necessary for successful communications.. Test Procedure Conducted method: The RF output of the transmitter was connected to the wireless test set and the spectrum analyzer through sufficient attenuation. Universal Radio EUT Communication Tester Radiated method: TIA 603-C section 2.2.17 Test Equipment List and Details Serial Calibration Calibration Manufacturer Description Model Number Date Due Date Sunol Sciences Horn Antenna DRH-118 A052604 2011-05-05 2012-05-04 Rohde & Schwarz Signal Analyzer FSIQ 26 609358 2011-07-08 2012-07-07 Sunol Sciences Broadband Antenna JB1 A040904-1 2011-07-05 2012-07-04 Mini-Circuits Amplifier ZVA-213+ T-E27H 2011-03-08 2012-03-07 HP Signal Generator HP8657A 2849U00982 2010-10-28 2011-10-27 HP Amplifier HP8447D 2944A09795 2011-08-02 2012-08-02 HP Synthesized Sweeper 8341B 2624A00116 2010-11-07 2011-11-06 COM POWER Dipole Antenna AD-100 041000 2011-09-25 2012-09-24 A.H. System Horn Antenna SAS-200/571 135 2011-05-17 2012-05-17 * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Shenzhen) attests that all calibrations have been performed in accordance to NVLAP requirements, traceable to the NIST. FCC Part 22H/24E Page 11 of 30

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RDG110916005-00B Test Data Environmental Conditions Temperature: 25 °C Relative Humidity: 56 % ATM Pressure: 100.0kPa The testing was performed by Walt Kang on 2011-09-27. Conducted Power: Cellular Band (Part 22H) Frequency Output Power Limit Mode Channel (MHz) (dBm) (dBm) 128 824.2 31.98 38.45 GSM 190 836.6 31.92 38.45 251 848.8 31.91 38.45 Frequency Output Power (dBm) Mode Channel (MHz) 1 slot 2 slots 3 slots 4 slots 128 824.2 31.49 30.62 GPRS 190 836.6 31.41 30.57 Not Supported 251 848.8 31.39 30.55 PCS Band (Part 24E) Frequency Output Power Limit Mode Channel (MHz) (dBm) (dBm) 512 1850.2 28.49 33 GSM 661 1880.0 28.50 33 810 1909.8 28.57 33 Frequency Output Power (dBm) Mode Channel (MHz) 1 slot 2 slots 3 slots 4 slots 512 1850.2 28.45 27.61 GPRS 661 1880.0 28.48 27.64 Not Supported 810 1909.8 28.52 27.69 FCC Part 22H/24E Page 12 of 30

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RDG110916005-00B ERP & EIRP: ERP for Cellular Band (Part 22H) Indicated Test Antenna Substituted Antenna Table Cable Absolute Part 22H S.A. Gain Frequency Angle Height Polar Frequency S.G. Ant. Loss Level Limit Reading Level Polar Correction (MHz) Degree (m) (H/V) (MHz) (dB) (dBm) (dBm) (dBµV) (dBm) (H/V) (dBd) Low Channel 824.2 93.23 110 1.5 H 824.2 21.1 H 0 0.68 20.42 38.45 824.2 105.64 122 1.6 V 824.2 31.9 V 0 0.68 31.22 38.45 EIRP for PCS Band (Part 24E) Indicated Test Antenna Substituted Antenna Table Cable Absolute Part 24E S.A. Gain Frequency Angle Height Polar Frequency S.G. Ant. Loss Level Limit Reading Level Polar Correction (MHz) Degree (m) (H/V) (MHz) (dB) (dBm) (dBm) (dBµV) (dBm) (H/V) (dBi) High Channel 1909.8 91.37 130 1.8 H 1909.8 19.5 H 6.2 1.1 24.6 38.45 1909.8 91.64 158 2.1 V 1909.8 22.9 V 6.2 1.1 28.0 38.45 FCC Part 22H/24E Page 13 of 30

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RDG110916005-00B FCC §2.1049, §22.917, §22.905 & §24.238 - OCCUPIED BANDWIDTH Applicable Standard FCC §2.1049, §22.917, §22.905 and §24.238. Test Procedure The RF output of the transmitter was connected to the simulator and the spectrum analyzer through sufficient attenuation. The resolution bandwidth of the spectrum analyzer was set at 30 kHz (Cellular /PCS) and the 26 dB & 99% bandwidth was recorded. EUT Splitter EMI Test Receiver Universal Radio Communication Tester Test Equipment List and Details Serial Calibration Calibration Manufacturer Description Model Number Date Due Date Rohde & Schwarz EMI Test Receiver ESCI 100035 2010-11-11 2011-11-10 * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Shenzhen) attests that all calibrations have been performed in accordance to NVLAP requirements, traceable to the NIST. Test Data Environmental Conditions Temperature: 25 °C Relative Humidity: 56 % ATM Pressure: 100.0 kPa The testing was performed by Walt Kang on 2011-09-29. FCC Part 22H/24E Page 14 of 30

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RDG110916005-00B GMSK: Cellular Band (Part 22H) Frequency 99% Occupied Bandwidth 26 dB Occupied Bandwidth Channel (MHz) (kHz) (kHz) 190 836.6 250 338 PCS Band (Part 24E) Frequency 99% Occupied Bandwidth 26 dB Occupied Bandwidth Channel (MHz) (kHz) (kHz) 661 1880.0 252 334 Please refer to the following plots. Cellular Band (Part 22H) 99% Occupied Bandwidth * RBW 30 kHz Marker 1 [T1 ] * VBW 100 kHz 32.79 dBm Ref 36 dBm * Att 45 dB SWT 2.5 ms 836.666000000 MHz 1 Offset 12 dB OBW250.000000000 kHz 30 Temp 1 [T1 OBW] 19.74 dBm A T1 T2 836.476000000 MHz 1 PK 20 Temp 2 [T1 OBW] MAXH 20.32 dBm LVL 836.726000000 MHz 10 0 PS -10 -20 3DB AC -30 -40 -50 -60 Center 836.6 MHz 100 kHz/ Span 1 MHz Date: 29.SEP.2011 22:28:47 FCC Part 22H/24E Page 15 of 30

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RDG110916005-00B 26 dB Occupied Bandwidth * RBW 30 kHz Marker 1 [T1 ] * VBW 100 kHz 32.95 dBm Ref 36 dBm * Att 45 dB SWT 2.5 ms 836.604000000 MHz 1 Offset 12 dB ndB [T1] 26.00 dB 30 BW 338.000000000 kHz Temp 1 [T1 ndB] A 6.61 dBm 1 PK 20 836.432000000 MHz MAXH Temp 2 [T1 ndB] LVL 6.54 dBm 10 T1 T2 836.770000000 MHz 0 PS -10 -20 3DB AC -30 -40 -50 -60 Center 836.6 MHz 100 kHz/ Span 1 MHz Date: 29.SEP.2011 22:28:19 PCS Band (Part 24E) 99% Occupied Bandwidth * RBW 30 kHz Marker 1 [T1 ] * VBW 100 kHz 29.22 dBm Ref 37 dBm * Att 45 dB SWT 2.5 ms 1.879930000 GHz Offset 13 dB OBW252.000000000 kHz 1 30 Temp 1 [T1 OBW] 15.63 dBm A 1.879876000 GHz 1 PK 20 T2 Temp 2 [T1 OBW] MAXH T1 16.41 dBm LVL 1.880128000 GHz 10 0 PS -10 -20 3DB AC -30 -40 -50 -60 Center 1.88 GHz 100 kHz/ Span 1 MHz Date: 29.SEP.2011 22:32:08 FCC Part 22H/24E Page 16 of 30

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RDG110916005-00B 26 dB Occupied Bandwidth * RBW 30 kHz Marker 1 [T1 ] * VBW 100 kHz 29.27 dBm Ref 37 dBm * Att 45 dB SWT 2.5 ms 1.880068000 GHz Offset 13 dB ndB [T1] 26.00 dB 1 30 BW 334.000000000 kHz Temp 1 [T1 ndB] A 3.49 dBm 1 PK 20 1.879834000 GHz MAXH Temp 2 [T1 ndB] LVL 3.53 dBm 10 1.880168000 GHz T1 T2 0 PS -10 -20 3DB AC -30 -40 -50 -60 Center 1.88 GHz 100 kHz/ Span 1 MHz Date: 29.SEP.2011 22:31:30 FCC Part 22H/24E Page 17 of 30

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RDG110916005-00B FCC §2.1051, §22.917(a) & §24.238(a) - SPURIOUS EMISSIONS AT ANTENNA TERMINALS Applicable Standard FCC §2.1051, §22.917(a) and §24.238(a). The spectrum was to be investigated to the tenth harmonics of the highest fundamental frequency as specified in § 2.1051. Test Procedure The RF output of the transceiver was connected to a spectrum analyzer and simulator through appropriate attenuation. The resolution bandwidth of the spectrum analyzer was set at 100 kHz. Sufficient scans were taken to show any out of band emissions up to 10th harmonic. EUT Splitter Spectrum Analyzer Universal Radio Communication Tester Test Equipment List and Details Serial Calibration Calibration Manufacturer Description Model Number Date Due Date Rohde & Schwarz EMI Test Receiver ESCI 100035 2010-11-11 2011-11-10 * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Shenzhen) attests that all calibrations have been performed in accordance to NVLAP requirements, traceable to the NIST. Test Data Environmental Conditions Temperature: 25 °C Relative Humidity: 56 % ATM Pressure: 100.0kPa The testing was performed by Walt Kang on 2011-09-28. Please refer to the following plots. FCC Part 22H/24E Page 18 of 30

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RDG110916005-00B Cellular Band (Part 22H) 30 – 1000 MHz - Low Channel Marker 1 [T1] RBW 100 kHz RF Att 0 dB Ref Lvl -50.46 dBm VBW 300 kHz -4 dBm 943.62725451 MHz SWT 245 ms Unit dBm -4 6 dB Offset A -10 D1 -13 dBm -20 -30 1MAX 1MA -40 1 -50 -60 -70 -80 -90 -100 -104 Start 30 MHz 97 MHz/ Stop 1 GHz Date: 28.SEP.2011 14:43:59 1 – 10 GHz - Low Channel Marker 1 [T1] RBW 1 MHz RF Att 0 dB Ref Lvl -38.25 dBm VBW 3 MHz -4 dBm 1.68537074 GHz SWT 52 ms Unit dBm -4 6 dB Offset A -10 D1 -13 dBm -20 -30 1 1MAX 1MA -40 -50 -60 -70 -80 -90 -100 -104 Start 1 GHz 900 MHz/ Stop 10 GHz Date: 28.SEP.2011 14:40:26 FCC Part 22H/24E Page 19 of 30

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RDG110916005-00B PCS Band (Part 24E) 30 – 1000 MHz - High Channel Marker 1 [T1] RBW 100 kHz RF Att 0 dB Ref Lvl -55.72 dBm VBW 300 kHz -3 dBm 990.28056112 MHz SWT 245 ms Unit dBm -3 7 dB Offset A -10 D1 -13 dBm -20 -30 1MAX 1MA -40 -50 1 -60 -70 -80 -90 -100 -103 Start 30 MHz 97 MHz/ Stop 1 GHz Date: 28.SEP.2011 14:34:05 1 - 20 GHz - High Channel Marker 1 [T1] RBW 1 MHz RF Att 0 dB Ref Lvl -33.24 dBm VBW 3 MHz -3 dBm 3.74148297 GHz SWT 110 ms Unit dBm -3 7 dB Offset A -10 D1 -13 dBm -20 -30 1 1MAX 1MA -40 -50 -60 -70 -80 -90 -100 -103 Start 1 GHz 1.9 GHz/ Stop 20 GHz Date: 28.SEP.2011 14:47:33 FCC Part 22H/24E Page 20 of 30

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RDG110916005-00B FCC §2.1053, §22.917 & §24.238 - SPURIOUS RADIATED EMISSIONS Applicable Standard FCC § 2.1053, §22.917 and § 24.238. Test Procedure The transmitter was placed on a wooden turntable, and it was transmitting into a non-radiating load which was also placed on the turntable. The measurement antenna was placed at a distance of 3 meters from the EUT. During the tests, the antenna height and polarization as well as EUT azimuth were varied in order to identify the maximum level of emissions from the EUT. The test was performed by placing the EUT on 3-orthogonal axis. The frequency range up to tenth harmonic of the fundamental frequency was investigated. Remove the EUT and replace it with substitution antenna. A signal generator was connected to the substitution antenna by a non-radiating cable. The absolute levels of the spurious emissions were measured by the substitution. Spurious emissions in dB = 10 lg (TXpwr in Watts/0.001) – the absolute level Spurious attenuation limit in dB = 43 + 10 Log10 (power out in Watts) Test Equipment List and Details Serial Calibration Calibration Manufacturer Description Model Number Date Due Date Sunol Sciences Horn Antenna DRH-118 A052604 2011-05-05 2012-05-04 Sunol Sciences Broadband Antenna JB1 A040904-1 2011-07-05 2012-07-04 Rohde & Schwarz Signal Analyzer FSIQ 26 609358 2011-07-08 2012-07-07 Mini-Circuits Amplifier ZVA-213+ T-E27H 2011-03-08 2012-03-07 HP Signal Generator HP8657A 2849U00982 2010-10-28 2011-10-27 HP Amplifier HP8447D 2944A09795 2011-08-02 2012-08-01 HP Synthesized Sweeper 8341B 2624A00116 2010-11-07 2011-11-06 COM POWER Dipole Antenna AD-100 041000 2011-09-25 2012-09-24 A.H. System Horn Antenna SAS-200/571 135 2011-05-17 2012-05-16 * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Shenzhen) attests that all calibrations have been performed in accordance to NVLAP requirements, traceable to the NIST. FCC Part 22H/24E Page 21 of 30

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RDG110916005-00B Test Data Environmental Conditions Temperature: 25 °C Relative Humidity: 56 % ATM Pressure: 100.0kPa The testing was performed by Walt Kang on 2011-09-27. EUT Operation Mode: Transmitting Cellular Band (Part 22H) Below 1 GHz Indicated Test Antenna Substituted Table Ant. Absolute S.A. Cable Level Limit Margin Frequency Angle Height Polar Frequency Level Gain Reading Degree Loss (dBm) (dBm) (dB) (MHz) (m) (H/V) (MHz) (dBm) Correction (dBµV) (dB) (dBd) Low Channel 809.35 35.69 135 1.4 V 809.35 -59.1 0 0.67 -59.77 -13 46.77 483.65 34.23 60 1.8 V 483.65 -61.5 0 0.49 -61.99 -13 48.99 483.65 33.24 50 1.9 H 483.65 -61.7 0 0.49 -62.19 -13 49.19 812.36 34.35 180 1.5 H 812.36 -62.9 0 0.67 -63.57 -13 50.57 Above 1 GHz Indicated Test Antenna Substituted Table Absolute S.A. Limit Margin Frequency Angle Height Polar Frequency Level Ant. Cable Level Reading Degree Gain Loss (dBm) (dB) (MHz) (m) (H/V) (MHz) (dBm) (dBm) (dBµV) (dBi) (dB) High Channel 2472.6 54.16 180 2.3 V 2472.6 -43.7 7.3 1.19 -37.59 -13 24.59 2472.6 53.18 178 2.5 H 2472.6 -44.8 7.3 1.19 -38.69 -13 25.69 3297.6 38.39 186 1.8 V 3297.6 -55.6 6.7 1.39 -50.29 -13 37.29 1648.4 43.8 99 2.1 V 1648.4 -55.8 6.2 0.94 -50.54 -13 37.54 1648.4 42.78 99 1.5 H 1648.4 -58.2 6.2 0.94 -52.94 -13 39.94 3297.6 35.43 186 1.4 H 3297.6 -58.5 6.7 1.39 -53.19 -13 40.19 FCC Part 22H/24E Page 22 of 30

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RDG110916005-00B PCS Band (Part 24E) Below 1 GHz Indicated Test Antenna Substituted Table Absolute S.A. Limit Margin Frequency Angle Height Polar Frequency Level Ant. Cable Level Reading Degree Gain Loss (dBm) (dB) (MHz) (m) (H/V) (MHz) (dBm) (dBm) (dBµV) (dBd) (dB) High Channel 687.39 37.62 210 1.6 V 687.39 -57.1 0 0.6 -57.7 -13 44.7 245.65 34.32 180 1.8 V 245.65 -61.5 0 0.3 -61.8 -13 48.8 245.65 31.45 250 1.4 H 245.65 -63.5 0 0.3 -63.8 -13 50.8 687.39 33.46 130 1.6 H 687.39 -63.8 0 0.6 -64.4 -13 51.4 Above 1 GHz Indicated Test Antenna Substituted Table Absolute S.A. Limit Margin Frequency Angle Height Polar Frequency Level Ant. Cable Level Reading Degree Gain Loss (dBm) (dB) (MHz) (m) (H/V) (MHz) (dBm) (dBm) (dBµV) (dBi) (dB) High Channel 3819.6 46.62 312 1.7 V 3819.6 -53.0 6.9 1.47 -47.57 -13 34.57 5729.4 42.51 155 2.3 V 5729.4 -55.3 8.3 1.76 -48.76 -13 35.76 5729.4 42.5 156 2.1 H 5729.4 -55.5 8.3 1.76 -48.96 -13 35.96 7639.2 39.38 87 1.4 H 7639.2 -54.6 7.6 2.10 -49.10 -13 36.10 3819.6 45.97 330 1.5 H 3819.6 -55.0 6.9 1.47 -49.57 -13 36.57 7639.2 36.74 88 2.6 V 7639.2 -57.3 7.6 2.10 -51.80 -13 38.80 FCC Part 22H/24E Page 23 of 30

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RDG110916005-00B FCC §22.917(a) & §24.238(a) - BAND EDGES Applicable Standard According to § 22.917(a), the power of any emissions outside of the authorized operating frequency ranges must be attenuated below the transmitting power (P) by a factor of at least 43 + 10 log(P) dB. According to §24.238(a), the power of any emissions outside of the authorized operating frequency ranges must be attenuated below the transmitting power (P) by a factor of at least 43 + 10 log(P) dB. Test Procedure The RF output of the transmitter was connected to the input of the spectrum analyzer through sufficient attenuation. The center of the spectrum analyzer was set to block edge frequency, RBW set to 10 kHz. EUT Splitter EMI Test Receiver Universal Radio Communication Tester Test Equipment List and Details Serial Calibration Calibration Manufacturer Description Model Number Date Due Date Rohde & Schwarz EMI Test Receiver ESCI 100035 2010-11-11 2011-11-10 * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Shenzhen) attests that all calibrations have been performed in accordance to NVLAP requirements, traceable to the NIST. Test Data Environmental Conditions Temperature: 25 °C Relative Humidity: 56 % ATM Pressure: 100.0kPa The testing was performed by Walt Kang on 2011-09-29. Please refer to the following tables and plots. FCC Part 22H/24E Page 24 of 30

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RDG110916005-00B Cellular Band (Part 22H) Frequency Emission Limit (MHz) (dBm) (dBm) 823.996 -14.93 -13 849.020 -14.13 -13 PCS Band (Part 24E) Frequency Emission Limit (MHz) (dBm) (dBm) 1849.996 -16.38 -13 1910.024 -17.45 -13 Cellular Band, Left Band Edge * RBW 3 kHz Marker 1 [T1 ] * VBW 10 kHz -14.93 dBm Ref 33 dBm * Att 45 dB SWT 225 ms 823.996000000 MHz 30 Offset 12 dB A 20 1 RM * MAXH LVL 10 0 PS -10 D1 -13 dBm 1 -20 3DB AC -30 -40 -50 -60 Center 824 MHz 200 kHz/ Span 2 MHz Date: 29.SEP.2011 22:25:05 FCC Part 22H/24E Page 25 of 30

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RDG110916005-00B Cellular Band, Right Band Edge * RBW 3 kHz Marker 1 [T1 ] * VBW 10 kHz -14.13 dBm Ref 33 dBm * Att 45 dB SWT 225 ms 849.020000000 MHz 30 Offset 12 dB A 20 1 RM * MAXH LVL 10 0 PS -10 1 D1 -13 dBm -20 3DB AC -30 -40 -50 -60 Center 849 MHz 200 kHz/ Span 2 MHz Date: 29.SEP.2011 22:25:59 PCS Band, Left Band Edge * RBW 3 kHz Marker 1 [T1 ] * VBW 10 kHz -16.38 dBm Ref 30 dBm * Att 45 dB SWT 225 ms 1.849996000 GHz 30 Offset 13 dB A 20 1 RM * MAXH 10 LVL 0 PS -10 D1 -13 dBm 1 -20 3DB -30 AC -40 -50 -60 -70 Center 1.85 GHz 200 kHz/ Span 2 MHz Date: 29.SEP.2011 22:33:36 FCC Part 22H/24E Page 26 of 30

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RDG110916005-00B PCS Band, Right Band Edge * RBW 3 kHz Marker 1 [T1 ] * VBW 10 kHz -17.45 dBm Ref 30 dBm * Att 45 dB SWT 225 ms 1.910024000 GHz 30 Offset 13 dB A 20 1 RM * MAXH 10 LVL 0 PS -10 D1 -13 dBm 1 -20 3DB -30 AC -40 -50 -60 -70 Center 1.91 GHz 200 kHz/ Span 2 MHz Date: 29.SEP.2011 22:34:15 FCC Part 22H/24E Page 27 of 30

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RDG110916005-00B FCC §2.1055, §22.355 & §24.235 - FREQUENCY STABILITY Applicable Standard FCC §2.1055 (a), §2.1055 (d), §22.355, §24.235 According to §22.355, the carrier frequency of each transmitter in the Public Mobile Services must be maintained within the tolerances given in Table below: Frequency Tolerance for Transmitters in the Public Mobile Services Frequency Range Base, fixed Mobile ≤ 3 watts Mobile ≤ 3 watts (MHz) (ppm) (ppm) (ppm) 25 to 50 20.0 20.0 50.0 50 to 450 5.0 5.0 50.0 450 to 512 2.5 5.0 5.0 821 to 896 1.5 2.5 2.5 928 to 929. 5.0 N/A N/A 929 to 960. 1.5 N/A N/A 2110 to 2220 10.0 N/A N/A According to §24.235, the frequency stability shall be sufficient to ensure that the fundamental emissions stays within the authorized frequency block. Test Procedure Frequency Stability vs. Temperature: The equipment under test was connected to an external DC power supply and the RF output was connected to communication test set via feed-through attenuators. The EUT was placed inside the temperature chamber. The DC leads and RF output cable exited the chamber through an opening made for the purpose. After the temperature stabilized for approximately 20 minutes, the frequency output was recorded from the communication test set. Frequency Stability vs. Voltage: An external variable DC power supply was connected to the battery terminals of the equipment under test. The voltage was set to 115% of the nominal value and was then decreased until the transmitter light no longer illuminated; i.e., the battery end point. The output frequency was recorded for each battery voltage. Temperature Chamber EUT Test Equipment FCC Part 22H/24E Page 28 of 30

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RDG110916005-00B Test Equipment List and Details Serial Calibration Calibration Manufacturer Description Model Number Date Due Date Temperature & WUHUAN HTP205 20021115 2011-06-04 2012-06-03 Humidity Chamber Universal Radio Rohde & Schwarz CMU200 109038 2011-04-11 2012-04-10 Communication Tester * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Shenzhen) attests that all calibrations have been performed in accordance to NVLAP requirements, traceable to the NIST. Test Data Environmental Conditions Temperature: 25 °C Relative Humidity: 56 % ATM Pressure: 100.0kPa The testing was performed by Walt Kang on 2011-09-27. Cellular Band (Part 22H) Middle Channel, fo =836.6 MHz Frequency Frequency Temperature Power Supplied Limit Error Error (OC) (VDC) (ppm) (Hz) (ppm) -30 -8 -0.0096 2.5 -20 -10 -0.0120 2.5 -10 -11 -0.0131 2.5 0 -10 -0.0120 2.5 10 3.7 -11 -0.0131 2.5 20 -9 -0.0108 2.5 30 -10 -0.0120 2.5 40 -9 -0.0108 2.5 50 -11 -0.0131 2.5 V max.=4.2 -8 -0.0096 2.5 25 V min.= 3.5 -11 -0.0131 2.5 FCC Part 22H/24E Page 29 of 30

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RDG110916005-00B PCS Band (Part 24E) Middle Channel, fo =1880.0 MHz Frequency Frequency Temperature Power Supplied Error Error Result (OC) (VDC) (Hz) (ppm) -30 -26 -0.0138 pass -20 -25 -0.0133 pass -10 -26 -0.0138 pass 0 -28 -0.0149 pass 10 3.7 -25 -0.0133 pass 20 -25 -0.0133 pass 30 -26 -0.0138 pass 40 -26 -0.0138 pass 50 -25 -0.0133 pass V max.=4.2 -27 -0.0144 pass 25 V min.= 3.5 -26 -0.0138 pass ***** END OF REPORT ***** FCC Part 22H/24E Page 30 of 30


Document Created: 2011-10-30 13:39:40
Document Modified: 2011-10-30 13:39:40
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC