Cover Letters

FCC ID: ZUE7000

Cover Letter(s)

Download: PDF
FCCID_3617362

g~ | INN> VAfibN ORPORATION Modular Approval Request — FCC RE: Request for modular approval Model: 7000 FCC ID: ZUE7000 To whom it may concern, We formerly request modular approval on the above reference device pursuant to the requirements of FCC publication 996369 D01 for modular approval of Part 15 devices. Modular approval Yes No Comment* requirement (a) The radio elements of the radio frequency Our request is for a PCB assembly with capability to drive two motors circuitry must be shielded. Physical/discrete and C tuning capacitors may be located external to the shield, but must be on the module assembly. (b) The module shall have buffered modulation/data input(s) (if such inputs are provided) to ensure that the module will comply Not applicable (see above) with the requirements set out in the applicable FCC rule part under conditions of excessive data (c) The module shall have its own power supply regulation on the module. This is to ensure that the module will comply with the requirements set Not applicable (see above) out in the applicable standard regardless of the design of the power supplying circuitry in the host (d) The module must certified with specific antennas and these antennas must be contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and (e) The module shall be tested for compliance with the applicable standard in a stand—alone configuration, i.e. the module must not be inside (f) The module must be labelled with its permanently affixed FCC ID label, or use an Shaping the future of health and weliness #230 1130 Morison Onve. Offawa, Ontaric K2X $N6. 1 613—628—6673 F 613—828—0168. www.standardinnovation.caom

(g) The module shall comply with all specific rules applicable to the transmitter includingall the| X [ conditions provided in the integration instructions rovided by the grantee. (h) The module must comply with RF exposure X O requirements * Please provide a detailed explanation for each item Based on the above information this request is for: X LIMITED OSINGLE modular approval. This module will only be used in Standard Innovation devices, where the . installations of the module are done in accordance to SIC assembly instructions to ensure compliance is maintained. Sincerely, /37—- M/eAPymz Bruce Murison 8/10/2017 Standard Innovation Corp. Suite 330, 1130 Morrison Drive Ottawa, Ontario Canada Shaping the future of health and weliness 4230 1130 Morison Onve. Ofttawa, Ontaric K2X $N6. T 613—826—6678 F 613.826.0168. www.standardinnovation.con


Document Created: 2017-08-15 17:10:57
Document Modified: 2017-08-15 17:10:57
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC