Test report

FCC ID: ZUE4000

Test Report

Download: PDF
FCCID_3246461

                                                                                                                         ONE WORLD             OUR APPROVAL




    Test report

     316050-2R1TRFWL
     Date of issue: January 3, 2017



     Applicant:
     Standard Innovation Corporation
     Product:
     We-Vibe Unite Remote
     Model:
     4000
     FCC ID:                            IC Registration number:
     ZUE4000                            9804A-4000
     Specifications:
      FCC 47 CFR Part 15 Subpart C, §15.231
                Periodic operation in the band 40.66-40.70 MHz and above 70 MHz.

      RSS-210, Issue 9, August 2016, Annex A.1
                Momentarily operated devices




www.nemko.com                         Nemko Canada Inc., a testing laboratory, is accredited by the Standards Council of Canada. The tests         SCC Accredited
                                                                                                                                                       LAB
                                                                          included in this report are within the scope of this accreditation


                                                                                                                                                         LAB
                                                                                                                                                    Accrédité CCN
                                                                                        FCC 15.231 and RSS-210 A1.1.docx; Date: Oct 2014                            TM


Lab and test locations




Company name               Nemko Canada Inc.
Facilities                 Ottawa site:                                Montreal site:                               Almonte site:
                           303 River Road, Ottawa, ON, Canada,         292 Labrosse Avenue, Pointe-Claire, QC,      1500 Peter Robinson Road, West
                           K1V 1H2                                     Canada, H9R 5L8                              Carleton, ON, Canada, K0A 1L0
                           Tel: +1 613 737 9680                        Tel: +1 514 694 2684                         Tel: +1 613 256-9117
                           Fax: +1 613 737 9691                        Fax: +1 514 694 3528                         Fax: +1 613 256-8848

Test site registration     Organization               Registration and Recognition numbers
                           FCC                        175281 (Ottawa location)
                           ISED                       2040A-4 (Ottawa location)
Website                    www.nemko.com




Tested by:                 David Duchesne, Senior EMC/Wireless Specialist
Reviewed by:               Kevin Rose, Wireless/EMC Specialist
Date:                      January 3, 2017


Signature:




Limits of responsibility

Note that the results contained in this report relate only to the items tested and were obtained in the period between the da te of initial receipt of samples
and the date of issue of the report.
This test report has been completed in accordance with the e ui e e ts of I“O/IEC             . All esults o tai i this epo t a e ithi Ne ko Ca ada’s
ISO/IEC 17025 accreditation.
Copyright notification

Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its e ti et a d fo use the o pa ’s e plo ees o l .
Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibil ity of such third parties.
Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report.
© Nemko Canada Inc.




Report reference ID: 316050-2R1TRFWL                                                                                                       Page   of


Table of contents
Table of contents .......................................................................................................................................................................................................... 3
Section .        Report summary ................................................................................................................................................................................. 4
  1.1     Applicant ................................................................................................................................................................................................................................ 4
  1.2     Manufacturer ........................................................................................................................................................................................................................ 4
  1.3     Test specification .................................................................................................................................................................................................................. 4
  1.4     Test methods ......................................................................................................................................................................................................................... 4
  1.5     Statement of compliance ..................................................................................................................................................................................................... 4
  1.6     Exclusions .............................................................................................................................................................................................................................. 4
  1.7     Test report revision history .................................................................................................................................................................................................. 4
Section .        Summary of test results ....................................................................................................................................................................... 5
  2.1     FCC Part 15 Subpart C test results ....................................................................................................................................................................................... 5
  2.2     IC RSS-GEN, Issue 4 test results............................................................................................................................................................................................ 5
  2.3     IC RSS-210, Issue 9 test results............................................................................................................................................................................................. 5
Section .        Equipment under test (EUT) details ..................................................................................................................................................... 6
  3.1     Sample information .............................................................................................................................................................................................................. 6
  3.2     EUT information .................................................................................................................................................................................................................... 6
  3.3     Technical information ........................................................................................................................................................................................................... 6
  3.4     Product description and theory of operation ..................................................................................................................................................................... 6
  3.5     EUT exercise details .............................................................................................................................................................................................................. 6
  3.6     EUT setup diagram ................................................................................................................................................................................................................ 7
Section .        Engineering considerations .................................................................................................................................................................. 8
  4.1     Modifications incorporated in the EUT ............................................................................................................................................................................... 8
  4.2     Technical judgment ............................................................................................................................................................................................................... 8
  4.3     Deviations from laboratory tests procedures ..................................................................................................................................................................... 8
Section .        Test conditions .................................................................................................................................................................................... 9
  5.1     Atmospheric conditions ........................................................................................................................................................................................................ 9
  5.2     Power supply range .............................................................................................................................................................................................................. 9
Section .        Measurement uncertainty ................................................................................................................................................................. 10
  6.1     Uncertainty of measurement ............................................................................................................................................................................................. 10
Section .        Test equipment ................................................................................................................................................................................. 11
  7.1     Test equipment list ............................................................................................................................................................................................................. 11
Section .        Testing data ...................................................................................................................................................................................... 12
  8.1     FCC 15.231(a) and RSS-210 A1.1.1 Conditions for intentional radiators to comply with periodic operation.............................................................. 12
  8.2     FCC 15.231(b) and RSS-210 A1.1.2 Field strength of emissions ...................................................................................................................................... 14
  8.3     FCC 15.231(c) and RSS-210 A1.1.3 Emission bandwidth of momentary signals ............................................................................................................ 21
Section .        Block diagrams of test set-ups ........................................................................................................................................................... 23
  9.1     Radiated emissions set-up for frequencies below 1 GHz ................................................................................................................................................. 23
  9.2     Radiated emissions set-up for frequencies above 1 GHz ................................................................................................................................................. 23




  Report reference ID: 316050-2R1TRFWL                                                                                                                                                                                        Page     of


Section 1                    Report summary




“e tio            . Report summary

 .       Appli a t

Company name                                         Standard Innovation Corporation
Address                                              Suite 330, 1130 Morrison Drive, Ottawa, ON, Canada, K2H 9N6



 .       Ma ufa tu e

Company name                                         IT-Group Mfg. (Shenzhen) Ltd.
Address                                              528 Jinbi Road, Biling Village,
                                                     Pinshan Town, Pingshan New
                                                     District, Shenzhen
                                                     Postal code: 518118
                                                     Guangdong
                                                     China



 .       Test spe ifi atio

FCC 47 CFR Part 15, Subpart C, Clause 15.231        Periodic operation in the band 40.66–40.70 MHz and above 70 MHz
RSS-210, Issue 9, August 2016, Annex A.1            Momentarily operated devices



 .       Test        ethods

ANSI C63.10 - 2013                                   American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices



 .       “tate e t of o plia e

In the configuration tested, the EUT was found compliant.
Testing was completed against all relevant requirements of the test standard. Results obtained indicate that the product under test c omplies in full with
the requirements tested. The test results relate only to the items tested.

“ee “u      a     of test esults fo full details.



 .       E lusio s

None



 .       Test epo t e isio histo

     Revision #          Details of changes made to test report
        TRF              Original report issued
       R1TRF             Minor format corrections




Report reference ID: 316050-2R1TRFWL                                                                                                       Page   of


Section 2:                        Summary of test results




“e tio                 . Summary of test results

 .         FCC Pa t              “u pa t C test esults

                                                            Table . - : FCC Pa t      – Radio f e ue     de i es esults

         Part                Test description                                                                                 Verdict

      §15.31(e)              Variation of power source                                                                      See Notes 1
       §15.203               Antenna requirement                                                                            See Notes 2
     §15.207(a)              Conducted limits                                                                             Not applicable 3
     §15.231(a)              Conditions for intentional radiators to comply with periodic operation                            Pass
     §15.231(b)              Field strength of emissions                                                                       Pass
     §15.231(c)              Emission bandwidth                                                                                Pass
     §15.231(d)              Requirements for devices operating within 40.66–40.70 MHz band                               Not applicable 4
     §15.231(e)              Conditions for intentional radiators to comply with periodic operation                       Not applicable 5
Notes:           1 Fundamental  field strength was measured with a fresh battery.
                 2 The EUT is equipped with an integral antenna.
                 3 The EUT is battery powered.

                 4 The EUT does not operate in the frequency range of 40.66–40.70 MHz.

                 5 The EUT complies with requirement 15.231 (a).




 .         IC R““-GEN, Issue test esults

                                                                     Table . - : IC RSS-GEN Issue       esults

         Part               Test description                                                                                  Verdict

         7.1.2              Receiver radiated emission limits                                                             Not applicable 1
         7.1.3              Receiver conducted emission limits                                                            Not applicable 1
          8.8               Power Line Conducted Emissions Limits for Licence-Exempt Radio Apparatus                      Not applicable 2
Notes:           1 The   EUT does not contain a receiver.
                 2 The   EUT is battery powered.




 .         IC R““-             , Issue test esults

                                                                Table . - : IC RSS-      Issue 9 A     e A.   esults

         Part               Test description                                                                                  Verdict

         A.1.1              Types of momentary signals                                                                         Pass
         A.1.2              Field strength and frequency bands                                                                 Pass
         A.1.3              Bandwidth for momentary signals                                                                    Pass
         A.1.4              Reduced field strengths                                                                       Not applicable 2
Notes:           2   The EUT complies with requirement RSS-210 A1.1.2.




Report reference ID: 316050-2R1TRFWL                                                                                            Page    of


Section 3:                Equipment under test (EUT) details




“e tio          . Equipment under test (EUT) details

 .      “a ple i fo         atio

Receipt date                                 September 15, 2016
Nemko sample ID number                       133-003040



 .      EUT i fo        atio

Product name                                 We-Vibe Unite Remote
Model                                        4000
Serial number                                None



 .      Te h i al i fo         atio

Applicant IC company number                 9804A
IC UPN number                               4000
All used IC test site(s) Reg. number        2040A
RSS number and Issue number                 RSS-210 Annex A1.1, Issue 9, August 2016
Frequency Min (MHz)                         433.92
Frequency Max (MHz)                         433.92
RF power Min (W)                            N/A
RF power Max (W)                            N/A
Field strength, Units @ distance            82.4 dBµV/m Peak and 77.50 dBµV/m Average at 433.92 MHz @ 3 m
Measured BW (kHz) (99 %)                    17.7
Calculated BW (kHz), as per TRC-43          N/A
Type of modulation                          OOK
Emission classification (F1D, G1D, D1D)     K1D
Transmitter spurious, Units @ distance      55.5 dBµV/m Peak and 50.6 dBµV/m Average at 867.84 MHz @ 3 m
Power requirements                          3 VDC (Lithium battery CR123A 3V)
Antenna information                         The EUT uses a unique antenna coupling/ non-detachable antenna to the intentional radiator.



 .      P odu t des iptio a d theo                 of ope atio

The EUT is a remote for massager.



 .      EUT e e ise details

A sample in continuous transmit mode was provided for testing along with a test sample that was transmitting when the tamper sw itch was activated (by
removing the detector from its mounting bracket).




Report reference ID: 316050-2R1TRFWL                                                                                                  Page   of


Section 3:             Equipment under test (EUT) details




 .      EUT setup diag a




                                                                        EUT




                                                            Figure . - : Setup diag a




Report reference ID: 316050-2R1TRFWL                                                    Page   of


Section 4:               Engineering consideration




“e tio         . Engineering considerations

 .      Modifi atio s i o po ated i the EUT

There were no modifications performed to the EUT during this assessment.



 .      Te h i al judg e t

None



 .      De iatio s f o        la o ato       tests p o edu es

No deviations were made from laboratory procedures.




Report reference ID: 316050-2R1TRFWL                                       Page   of


 Section 5:                 Test conditions




 “e tio          . Test conditions

  .      At osphe i          o ditio s

 Temperature               15–30 °C
 Relative humidity         20–75 %
 Air pressure              860–1060 mbar

When it is impracticable to carry out tests under these conditions, a note to this effect stating the ambient temperature and relative humidity during the
tests shall be recorded and stated.



  .      Po e suppl           a ge

 The normal test voltage for equipment to be connected to the mains shall be the nominal mains voltage. For the purpose of the present document, the
 nominal voltage shall be the declared voltage, or any of the declared voltages ±5 %, for which the equipment was designed.




 Report reference ID: 316050-2R1TRFWL                                                                                                       Page   of


Section 6:               Measurement uncertainty




“e tio         . Measurement uncertainty

 .      U e tai t of          easu e e t

Measurement uncertainty budgets for the tests are detailed below. Measurement uncertainty calculations assume a coverage factor of K = 2 with 95%
certainty.

Test name                                                                                        Measurement uncertainty, dB
All antenna port measurements                                                                              0.55
Conducted spurious emissions                                                                               1.13
Radiated spurious emissions                                                                                3.78
AC power line conducted emissions                                                                          3.55




Report reference ID: 316050-2R1TRFWL                                                                                                Page   of


Section 7:             Test equipment




“e tio         . Test equipment

 .       Test e uip e t list

                                                            Table . - : E uip e t list

Equipment                              Manufacturer               Model no.                  Asset no.   Cal cycle          Next cal.
3 m EMI test chamber                   TDK                        SAC-3                      FA002047    1 year             Dec. 01/16
Receiver/spectrum analyzer             Rohde & Schwarz            ESU 26                     FA002043    1 year             Jan. 07/17
Spectrum analyzer                      Rohde & Schwarz            FSU                        FA001877    1 year             Apr. 15/17
Bilog antenna (20–3000 MHz)            Sunol                      JB3                        FA002108    1 year             Apr. 28/17
Horn antenna (1–18 GHz)                EMCO                       3115                       FA000825    1 year             Apr. 26/17
Pre-amplifier (1–18 GHz)               JCA                        JCA118-503                 FA002091    1 year             April 26/17
   Ω oa a le                           Huber + Suhner             None                       FA002074    1 year             April 26/17
   Ω oa a le                           Huber + Suhner             None                       FA002830    1 year             July 29/17
Notes:       None



                                                         Table . - : Test software details

Test description              Manufacturer of Software              Details
Radiated emissions            Rhode & Schwarz                       EMC32, Software for EMC Measurements, Version 9.26.01
Notes:       None




Report reference ID: 316050-2R1TRFWL                                                                                          Page   of


Section 8                    Testing data
Test name                    FCC 15.231(a) and RSS-210 A1.1.1 Conditions for intentional radiators to comply with periodic
                             operation
Specification                FCC Part 15 Subpart C and RSS-210, Issue 9




“e tio             . Testing data

 .           FCC    .      a a d R““-            A . . Co ditio s fo i te tio al adiato s to o pl                             ith pe iodi ope atio


     . .       Defi itio s a d li its

FCC:
       (a)    The provisions of this section are restricted to periodic operation within the band 40.66 –40.70 MHz and above 70 MHz. Except as shown in
              paragraph (e) of this section, the intentional radiator is restricted to the transmission of a control signal such as t hose used with alarm systems,
              door openers, remote switches, etc. Continuous transmissions, voice, video and the radio control of toys are not permitted. Data is permitted
              to be sent with a control signal. The following conditions shall be met to comply with the provisions for this periodic operation:
              (1) A manually operated transmitter shall employ a switch that will automatically deactivate the transmitter within not more than 5 seconds
                    of being released.
              (2) A transmitter activated automatically shall cease transmission within 5 seconds after activation.
              (3) Periodic transmissions at regular predetermined intervals are not permitted. However, polling or supervision transmissions, i ncluding
                    data, to determine system integrity of transmitters used in security or safety applications are allowed if the total duration of
                    transmissions does not exceed more than two seconds per hour for each transmitter. There is no limit on the number of individual
                    transmissions, provided the total transmission time does not exceed two seconds per hour.
              (4) Intentional radiators which are employed for radio control purposes during emergencies involving fire, security, and safety of life, when
                    activated to signal an alarm, may operate during the pendency of the alarm condition.
              (5) Transmission of set-up information for security systems may exceed the transmission duration limits in paragraphs (a)(1) and (a)(2) of this
                    section, provided such transmissions are under the control of a professional installer and do not exceed ten seconds after a manually
                    operated switch is released or a transmitter is activated automatically. Such set-up information may include data.

IC:
The following conditions shall be met to comply with the provisions for momentary operation:
     (a) A manually operated transmitter shall be equipped with a push-to-operate switch and be under manual control at all transmission times. When
           released, the transmitter shall cease transmission (holdover time of up to 5 seconds is permitted).
     (b) A transmitter activated automatically shall cease transmission within 5 seconds after activation (i.e. maximum 5 seconds of operation).
     (c) Periodic transmissions at regular predetermined intervals are not permitted, except as provided in Section A.1.1.5. However, polling or
           supervision transmissions to determine system integrity of transmitters used in security or safety applications are allowed if the total duration
           of transmission does not exceed 2 seconds per hour for each transmitter.
     (d) Intentional radiators employed for radio control purposes during emergencies involving fire, security of goods (e.g. burglar alarms), and safety-
           of-life, when activated to signal an alarm, may operate during the interval of the alarm condition.



     . .       Test su      a

Verdict                  Pass
Test date                September 19, 2016               Test engineer                 David Duchesne
Temperature              22.6 °C                          Relative humidity             64.7 %                     Air pressure             1003 mbar



     . .       O se atio s, setti gs a d spe ial otes

None




Report reference ID: 316050-2R1TRFWL                                                                                                             Page   of


Section 8                      Testing data
Test name                      FCC 15.231(a) and RSS-210 A1.1.1 Conditions for intentional radiators to comply with periodic
                               operation
Specification                  FCC Part 15 Subpart C and RSS-210, Issue 9




     . .      Test data

1)     The EUT is manual triggered. The EUT ceases transmission immediately after button is released. (See Figure 8.1-1 below)
2)     The EUT does not generate automatic transmission.
3)     The EUT does not generate periodic transmission.
4)     The EUT radio is not used for control purposes during emergencies involving fire, security, and safety of life.
5)     The EUT does not transmit set-up information.

                                                                              RBW 100 kHz           Marker 1 [T1 ]
                                                                              VBW 300 kHz                         -42.63 dBm
                    Ref     -30 dBm                   Att    5 dB             SWT 5 s                         10.000000 ms

                     -30


                    1 -40                                                                                                        A


           1 PK *
           CLRWR                                                                                                               TRG
                     -50




                     -60




                     -70

                               TRG -75.1 dBm

                     -80


                                                                                                                               3DB
                     -90




                     -100




                     -110




                     -120
                       F1
                     -130

                    Center 433.9224038 MHz                            500 ms/



                    Figure . - : T a s issio ti e utto a ti ated a d eleased. F o the plot a o e i di ates ti e of elease of the utto




Report reference ID: 316050-2R1TRFWL                                                                                                    Page   of


Section 8                        Testing data
Test name                        FCC 15.231(b) and RSS-210 A1.1.2 Field strength of emissions
Specification                    FCC Part 15 Subpart C and RSS-210, Issue 9




  .           FCC       .          a d R““-            A . . Field st e gth of e issio s


      . .         Defi itio s a d li its

FCC:
        (b)     In addition to the provisions of §15.205 the field strength of emissions from intentional radiators operated under this section shall not exceed
                the following table. (Table 8.2-1)
                1) The field strength limits in the table are specified at a distance of 3 meters. The tighter limits apply at the band edges.
                2) Intentional radiators operating under the provisions of this section shall demonstrate compliance with the limits on the field strength of
                      emissions, as shown in the above table, based on the average value of the measured emissions. As an alternative, compliance with the
                      limits in the above table may be based on the use of measurement instrumentation with a CISPR quasi-peak detector. The specific
                      method of measurement employed shall be specified in the application for equipment authorization. If average emission measure ments
                      are employed, the provisions in §15.35 for averaging pulsed emissions and for limiting peak emissions apply. Further, compliance with
                      the provisions of §15.205 shall be demonstrated using the measurement instrumentation specified in that section.
                3) The limits on the field strength of the spurious emissions in the table below are based on the fundamental frequency of the intentional
                      radiator. Spurious emissions shall be attenuated to the average (or, alternatively, CISPR quasi-peak) limits shown in this table or to the
                      general limits shown in §15.209, whichever limit permits a higher field strength.
IC:

        1)      The field strength of emissions from momentarily operated intentional radiators shall not exceed the limits in below. (Table 8.2-2)
        2)      Intentional radiators shall demonstrate compliance with the field strength limits shown in (Table 8.2-2), based on the average value of the
                measured emissions.
                Alternatively, compliance with the limit in (Table 8.2-2) may be demonstrated using a CISPR quasi-peak detector. If average measurements are
                employed, the requirements of Pulsed Operation of RSS-Gen apply regarding pulsed operation for averaging pulsed emissions and for limiting
                peak emissions.
        3)      The field strength limits shown in (Table 8.2-2) are based on the fundamental frequency of the intentional radiator. Unwanted emissions shall
                be attenuated to the limits listed in RSS-Gen or to the limits shown in table below, whichever are less stringent.


                                                                         Table . - : Field st e gth li its

  Fundamental frequency                                 Field strength of fundamental                                         Field strength of spurious emissions
         (MHz)                                      (µV/m)                       (dBµV/m)                                    (µV/m)                        (dBµV/m)
              40.66–40.701                           2,250                                 67                                  225                                 47
                 70–130                              1,250                                61.9                                 125                                41.9
                130–174                         1,250 to 3,750*                       61.9 to 71.5*                        125 to 375*                        41.9 to 51.5*
                174–260                              3,750                                71.5                                 375                                51.5
                260–470                         3,750 to 12,500*                      71.5 to 81.9*                       375 to 1,250*                       51.5 to 61.9*
               Above 470                            12,500                                81.9                                1,250                               61.9
Notes:            1The levels applicable to FCC only. For IC field strength shall not exceed 10 µV/m (80 dBµV/m) measured at 3 m with an average meter. Alternatively, it shall not

                  exceed 233 mV/m measured with a quasi-peak meter. (Note: Do not use the above to convert average meter readings to quasi-peak values.)
                  Outside the 40.65–40.71 MHz band, the general field strength limits listed in RSS-Gen shall apply, except for harmonics, which shall not exceed 225 µV/m at 3 m.

                  * Linear interpolation with frequency F in MHz:
                  For 130–      MHz: F“ i o olts/ =          . ×F −
                  For 260–470 MHz: FS (microvolts/m) = (41.67 × F) – 7083

                  The frequency band 225–399.9 MHz is allocated for Government of Canada usage. There are different types of operations in different parts of this band of
                  frequencies, including communications with aircraft and operations using high-power transmitters. Besides avoiding the restricted frequency bands listed in RSS-
                  Gen, it is recommended that the entire 225–399.9 MHz band be avoided.




Report reference ID: 316050-2R1TRFWL                                                                                                                            Page     of


Section 8                  Testing data
Test name                  FCC 15.231(b) and RSS-210 A1.1.2 Field strength of emissions
Specification              FCC Part 15 Subpart C and RSS-210, Issue 9




  . .       Defi itio s a d li its, o ti ued


                                                Table . - : FCC §      .   9 a d RSS-Ge – Radiated e issio li its

                Frequency,                                   Field strength of emissions                                      Measurement distance, m
                   MHz                                    µV/m                       dBµV/m
             0.009–0.490                                   2400/F                    67.6 – 20 × log10(F)                              300
             0.490–1.705                                  24000/F                    87.6 – 20 × log10(F)                               30
              1.705–30.0                                     30                             29.5                                        30
                30–88                                       100                             40.0                                        3
                88–216                                      150                             43.5                                        3
               216–960                                      200                             46.0                                        3
              above 960                                     500                             54.0                                        3
Notes:       F = fundamental frequency in kHz
             In the emission table above, the tighter limit applies at the band edges.
             For frequencies above 1 GHz the limit on peak RF emissions is 20 dB above the maximum permitted average emission limit applicable to the equipment
               under test.


                                                             Table . - : IC est i ted f e ue         a ds

                 MHz                                        MHz                                         MHz                                         GHz
             0.090–0.110                               12.51975–12.52025                               399.9–410                                   5.35–5.46
           2.1735–2.1905                               12.57675–12.57725                                608–614                                    7.25–7.75
             3.020–3.026                                   13.36–13.41                                 960–1427                                    8.025–8.5
             4.125–4.128                                  16.42–16.423                                1435–1626.5                                   9.0–9.2
          4.17725–4.17775                              16.69475–16.69525                             1645.5–1646.5                                  9.3–9.5
          4.20725–4.20775                              16.80425–16.80475                               1660–1710                                   10.6–12.7
             5.677-5.683                                   25.5–25.67                                1718.8–1722.2                                13.25–13.4
             6.215–6.218                                   37.5–38.25                                  2200–2300                                  14.47–14.5
          6.26775–6.26825                                    73–74.6                                   2310–2390                                  15.35–16.2
          6.31175–6.31225                                   74.8–75.2                                  2655–2900                                   17.7–21.4
             8.291–8.294                                     108–138                                   3260–3267                                  22.01–23.12
             8.362–8.366                              156.52475–156.52525                              3332–3339                                   23.6–24.0
          8.37625–8.38675                                  156.7–156.9                                3345.8–3358                                  31.2–31.8
          8.41425–8.41475                                    240–285                                   3500–4400                                  36.43–36.5
            12.29–12.293                                    322–335.4                                  4500–5150                                  Above 38.6
Notes:      Certain frequency bands listed in Table 8.2-3 and above 38.6 GHz are designated for low-power licence-exempt applications. These frequency bands and the
            requirements that apply to the devices are set out in this Standard


                                                            Table . - : FCC est i ted f e ue          a ds

                 MHz                                        MHz                                         MHz                                         GHz
             0.090–0.110                               16.42–16.423                                  399.9–410                                   4.5–5.15
             0.495–0.505                            16.69475–16.69525                                 608–614                                    5.35–5.46
           2.1735–2.1905                            16.80425–16.80475                                960–1240                                    7.25–7.75
             4.125–4.128                                25.5–25.67                                   1300–1427                                   8.025–8.5
          4.17725–4.17775                               37.5–38.25                                  1435–1626.5                                   9.0–9.2
          4.20725–4.20775                                 73–74.6                                  1645.5–1646.5                                  9.3–9.5
             6.215–6.218                                 74.8–75.2                                   1660–1710                                   10.6–12.7
          6.26775–6.26825                               108–121.94                                 1718.8–1722.2                                13.25–13.4
          6.31175–6.31225                                 123–138                                    2200–2300                                  14.47–14.5
             8.291–8.294                               149.9–150.05                                  2310–2390                                  15.35–16.2
             8.362–8.366                           156.52475–156.52525                              2483.5–2500                                  17.7–21.4
          8.37625–8.38675                               156.7–156.9                                  2690–2900                                  22.01–23.12
          8.41425–8.41475                            162.0125–167.17                                 3260–3267                                   23.6–24.0
            12.29–12.293                               167.72–173.2                                  3332–3339                                   31.2–31.8
         12.51975–12.52025                                240–285                                   3345.8–3358                                 36.43–36.5
         12.57675–12.57725                               322–335.4                                   3600–4400                                  Above 38.6
             13.36–13.41
Notes:      None




Report reference ID: 316050-2R1TRFWL                                                                                                                  Page    of


 Section 8                   Testing data
 Test name                   FCC 15.231(b) and RSS-210 A1.1.2 Field strength of emissions
 Specification               FCC Part 15 Subpart C and RSS-210, Issue 9




    . .      Test su      a

 Verdict               Pass
 Test date             September 26, 2016               Test engineer               David Duchesne
 Temperature           23 °C                            Relative humidity           38 %             Air pressure   1007 mbar



    . .      O se atio s, setti gs a d spe ial otes

 The spectrum was searched from 30 MHz to the 10 th harmonic.

Spectrum analyser settings for radiated measurements within restricted bands below 1 GHz:
 Resolution bandwidth            100 kHz
 Video bandwidth                 300 kHz
 Detector mode                   Peak
 Trace mode                      Max Hold

Spectrum analyser settings for peak radiated measurements within restricted bands above 1 GHz:
 Resolution bandwidth           1 MHz
 Video bandwidth                3 MHz
 Detector mode                  Peak
 Trace mode                     Max Hold

Setup details
  EUT setup configuration          Table top
  Test facility                    3 m Semi anechoic chamber
  Measuring distance               3m
  Antenna height variation         1–4 m
  Turn table position              0–360°




 Report reference ID: 316050-2R1TRFWL                                                                                   Page    of


Section 8                       Testing data
Test name                       FCC 15.231(b) and RSS-210 A1.1.2 Field strength of emissions
Specification                   FCC Part 15 Subpart C and RSS-210, Issue 9




    . .      Test data

§15.35(c) When the radiated emission limits are expressed in terms of the average value of the emission, and pulsed operation is employed; the
measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does
not exceed 0.1 seconds.
                                                      �      ��
�            � �         �      � � =        × log   (            )
                                                          ��

Duty cycle/average factor calculations
                                                                                    RBW 500 kHz
                                                                                    VBW 2 MHz
                   Ref       -30 dBm                   Att        5 dB              SWT 100 ms

                   -30


                                                                                                                               A
                   -40
                                                                                                                             SGL
          1 PK *
          CLRWR                                                                                                              TRG
                   -50




                   -60



                                TRG -68.1 dBm
                   -70




                   -80


                                                                                                                             3DB
                   -90




                   -100




                   -110




                   -120



                   -130

                   Center 433.9224038 MHz                                    10 ms/



                                                                      Figure . - : Bu st o e        s



Measured Duty cycle:
Total ON time for data train: Tx on time 100 ms = 56.58 ms

Therefor utilized the declared clients Duty cycle.
                                                                                �     ��                    .
                                       �              � � =           × ��     (           )=    × ��   (       )=− .   �
                                           �    �




Report reference ID: 316050-2R1TRFWL                                                                                                     Page   of


Section 8                     Testing data
Test name                     FCC 15.231(b) and RSS-210 A1.1.2 Field strength of emissions
Specification                 FCC Part 15 Subpart C and RSS-210, Issue 9




  . .       Test data, o ti ued


                                                              Table . - : Field St e gth of Fu da e tal esults
                            Meas. peak        Peak field                                                                 Calculated average       Average field      Average field
  Freq.    Ant. Pol.                                           Peak field strength       Duty cycle correction
                          field strength1   strength limit                                                                 field strength2        strength limit       strength
 (MHz)      (V/H)                                                 margin3 (dB)                 factor (dB)
                             (dBµV/m)         (dBµV/m)                                                                        (dBµV/m)              (dBµV/m)         margin3 (dB)
               V                80.8            100.8                 20.0                         -4.9                          75.9                  80.8               5.0
 433.92
               H                82.4            100.8                 18.4                         -4.9                          77.5                  80.8               3.3
Notes:      1 Field strength (dBV/m) = spectrum analyzer value (dBV) + correction factor (dB)


                   Correction factor = antenna factor ACF (dB) + cable loss (dB) − amplifier gain (dB)
                   Sample calculation: 96.1 dBV/m (field strength) = 76.2 dBV (receiver reading) + 19.9 dB (Correction factor)
            2 Calculated   average field strength (dBµV/m) = measured Peak field strength (dBµV/m) + Duty cycle correction factor (dB). Duty cycle correction factor as
                calculated from §15.35 (c)
            3 Ma   gi   dB = field st e gth li it − field st e gth   easu e e t


                                                   Table . - : Field St e gth of Spu ious e issio s Ha           o i    esults
                            Meas. peak        Peak field                                                                 Calculated average       Average field      Average field
  Freq.    Ant. Pol.                                           Peak field strength       Duty cycle correction
                          field strength1   strength limit                                                                 field strength2        strength limit       strength
 (MHz)      (V/H)                                                 margin3 (dB)                 factor (dB)
                             (dBµV/m)         (dBµV/m)                                                                        (dBµV/m)              (dBµV/m)         margin3 (dB)
 867.84        H                55.5             80.8                 25.3                         -4.9                          50.6                  60.8              10.3
1735.68        H                45.0             80.8                 35.8                         -4.9                          40.1                  60.8              20.8
 2169.6        H                42.1             80.8                 38.7                         -4.9                          37.2                  60.8              23.7
2603.52        H                36.0             80.8                 44.8                         -4.9                          31.1                  60.8              29.8
3471.36        H                38.1             80.8                 42.7                         -4.9                          33.2                  60.8              27.7
Notes:      1 Field strength (dBV/m) = spectrum analyzer value (dBV) + correction factor (dB)


                   Co e tio fa to = a te a fa to ACF dB + a le loss dB − a plifie gai dB
                   Sample calculation: 59.4 dBV/m (field strength) = 70.3 dBV e ei e eadi g + −        . dB Co e tio fa to
            2 Calculated   average field strength (dBµV/m) = measured Peak field strength (dBµV/m) + Duty cycle correction factor (dB). Duty cycle correction factor as
                calculated from §15.35 (c)
            3 Ma   gi   dB = field st e gth li it − field st e gth   easu e e t

            All other spurious emissions (Harmonics) were greater that 20 dB from limit.


                                 Table . - : Field St e gth of Spu ious e issio s falli g ithi           est i ted a ds FCC a d IC esults

                            Meas. peak        Peak field                                                                 Calculated average       Average field      Average field
  Freq.    Ant. Pol.                                           Peak field strength       Duty cycle correction
                          field strength1   strength limit                                                                 field strength2        strength limit       strength
 (MHz)      (V/H)                                                 margin3 (dB)                 factor (dB)
                             (dBµV/m)         (dBµV/m)                                                                        (dBµV/m)              (dBµV/m)         margin3 (dB)
1301.76        H                56.8             74.0                 17.2                         -4.9                          51.9                  54.0               2.1
3037.44        H                38.8             74.0                 35.2                         -4.9                          33.9                  54.0              20.1
Notes:      1 Field strength (dBV/m) = spectrum analyzer value (dBV) + correction factor (dB)


                   Co e tio fa to = a te a fa to ACF dB + a le loss dB − a plifie gai dB
                   Sample calculation: 64.6 dBV/m (field strength) = 74.5 dBV e ei e eadi g + −9.9 dB) (Correction factor)
            2 Calculated   average field strength (dBµV/m) = measured Peak field strength (dBµV/m) + Duty cycle correction factor (dB). Duty cycle correction factor as
                calculated from §15.35 (c)
            3 Ma   gi   dB = field st e gth li it − field st e gth   easu e e t

            All other spurious emissions falling within restricted bands were greater that 20 dB from limit.




Report reference ID: 316050-2R1TRFWL                                                                                                                         Page    of


Section 8              Testing data
Test name              FCC 15.231(b) and RSS-210 A1.1.2 Field strength of emissions
Specification          FCC Part 15 Subpart C and RSS-210, Issue 9




  . .       “etup photos




                                              Figure . - : E issio s setup photo –    to   MHz




                                              Figure . - : E issio s setup photo –    to   MHz




Report reference ID: 316050-2R1TRFWL                                                             Page   of


Section 8              Testing data
Test name              FCC 15.231(b) and RSS-210 A1.1.2 Field strength of emissions
Specification          FCC Part 15 Subpart C and RSS-210, Issue 9




  . .       “etup photos, o ti ued




                                                Figure . - : E issio s setup photo – a o e GHz




                                                Figure . - : E issio s setup photo – a o e GHz




Report reference ID: 316050-2R1TRFWL                                                             Page   of


 Section 8                    Testing data
 Test name                    FCC Clause 15.231(c) and RSS-210 A1.1.3 Emission bandwidth of momentary signals
 Specification                FCC Part 15 Subpart C and RSS-210, Issue 9




   .         FCC   .            a d R““-       A . . E issio         a d idth of        o e ta       sig als


       . .     Defi itio s a d li its

 FCC:
 The bandwidth of the emission shall be no wider than 0.25 % of the center frequency for devices operating above 70 MHz and below 900 MHz. For
 devices operating above 900 MHz, the emission shall be no wider than 0.5 % of the center frequency. Bandwidth is determined a t the points 20 dB down
 from the modulated carrier.

 IC:
 For the purpose of Section A1.1, the 99 % bandwidth shall be no wider than 0.25 % of the centre frequency for devices operati ng between 70 MHz and
 900 MHz. For devices operating above 900 MHz, the emission shall be no wider than 0.5 % of the centre frequency.



       . .     Test su      a

 Verdict                 Pass
 Test date               September 19, 2016             Test engineer              David Duchesne
 Temperature             22.6 °C                        Relative humidity          64.7 %                   Air pressure          1003 mbar



       . .     O se atio s, setti gs a d spe ial otes

Spectrum analyser settings:
 Resolution bandwidth             ≥ % of e issio a d idth
 Video bandwidth                  ≥ × RBW
 Frequency span                   Wider than emission bandwidth
 Detector mode                    Peak




 Report reference ID: 316050-2R1TRFWL                                                                                                  Page   of


Section 8                               Testing data
Test name                               FCC Clause 15.231(c) and RSS-210 A1.1.3 Emission bandwidth of momentary signals
Specification                           FCC Part 15 Subpart C and RSS-210, Issue 9




   . .             Test data



                                                         * RBW   500 Hz   Marker 1 [T1 ]                                                                                * RBW   2 kHz     Marker 1 [T1 ]
                                                          VBW 2 kHz                   -43.01 dBm                                                                         VBW 5 kHz                 -40.72 dBm
       Ref   -30 dBm              Att    5 dB             SWT 200 ms           433.922754197 MHz                         Ref   -30 dBm              Att   5 dB           SWT 25 ms          433.922829272 MHz

       -30                                                                ndB [T1]     20.00 dB                          -30                                                              OBW 17.717717718 kHz
                                                                          BW     3.178178178 kHz                                                                                          Temp 1 [T1 OBW]
                                                                                                                                                                    1
                                                     1                    Temp 1 [T1 ndB]            A                                                                                             -67.12 dBm     A
       -40                                                                                                               -40
                                                                                      -63.01 dBm                                                                                            433.913995438 MHz
1 PK                                                                           433.921177620 MHz                  1 PK                                                                    Temp 2 [T1 OBW]
MAXH                                                                                                              MAXH
       -50                                                                Temp 2 [T1 ndB]                                -50                                                                       -68.14 dBm
                                                                                      -62.83 dBm                                                                                            433.931713155 MHz
                                                                               433.924355798 MHz
       -60                                      T1        T2                                                             -60
                                                                                                                                                            T1                  T2

       -70                                                                                                               -70




       -80                                                                                                               -80


                                                                                                     3DB                                                                                                          3DB
       -90                                                                                                               -90




       -100                                                                                                              -100




       -110                                                                                                              -110




       -120                                                                                                              -120



       -130                                                                                                              -130

       Center   433.9224038 MHz                 5 kHz/                               Span   50 kHz                       Center   433.9224038 MHz                10 kHz/                         Span   100 kHz




                                  Figure . - :                   dB a d idth                                                                        Figure . - : 99 % a d idth



                                                                                            Table . - :     dB a d idth esults

                       20 dB bandwidth (kHz)                                                               Limit (kHz)                                                                  Margin, kHz
                                3.2                                                                          1084.8                                                                       1081.6
Notes:            Limit: 0.25 % of 433.92 MHz is 1084.8 kHz


                                                                                            Table . - : 99 % a d idth esults

                       99 % bandwidth (kHz)                                                                Limit (kHz)                                                                  Margin, kHz
                               17.7                                                                          1084.8                                                                       1067.1
Notes:            Limit: 0.25 % of 433.92 MHz is 1084.8 kHz




Report reference ID: 316050-2R1TRFWL                                                                                                                                                                    Page      of


Section 9:             Block diagrams of test set-ups




“e tio        . Block diagrams of test set-ups

.      Radiated e issio s set-up fo f e ue ies elo                              GHz


                                                        Radio absorbing material
                                                                                                        Antenna
                                                                                                         mast



                                                                           Test
                                                                         antenna




                                                                                                                       4m




                                                              3m



                                                                           Test
                                          EUT                            antenna

                                           Non-
                                        conducting
                                          table                                                                        1m
                               0.8 m

                                                                       Metal ground
                                                                          plane
                                        Turn table

                                                                                         Receiver




.      Radiated e issio s set-up fo f e ue ies a o e GHz


                                                        Radio absorbing material
                                                                                                    Antenna
                                                                                                     mast
                                                                              Test
                                                                            antenna




                                                                                                                  4m


                                                             3m



                                          EUT
                                                                              Test
                                                                            antenna
                                          Non-
                                       conducting
                                          table

                              1.5 m
                                                                                                                  1m


                                                                                                                            Metal ground plane

                                       Turn table

                                                                                      Receiver




                                                                                                        RF pre-amp




Report reference ID: 316050-2R1TRFWL                                                                                                             Page   of



Document Created: 2017-12-20 07:57:55
Document Modified: 2017-12-20 07:57:55

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC