Test report

FCC ID: ZUE1400

Test Report

Download: PDF
FCCID_1530108

www.nemko.com Compliance test report ID 180612-2TRFWL Date of issue August 25, 11 FCC 47 CFR Part 15 Subpart C, §15.249 Operation in the 902–928 MHz, 2400–2483.5 MHz, 5725–5875 MHz and 24.0–24.25 GHz Applicant Standard Innovation Corporation Product Personal Massager Model 1400 FCC ID ZUE1400 SCC Accredited LAB Nemko Canada Inc., a testing laboratory, is accredited by the Standards Council of Canada. The tests included in this report are within the scope of this accreditation LAB Accrédité CCN TM FCC 15.249.doc - Date: June, 2011

Test location Nemko Canada Inc. 303 River Road Ottawa, ON, K1V 1H2 Canada Test site FCC ID: 176392 (3 m semi anechoic chamber) Telephone +1 613 737 9680 Facsimile +1 613 737 9691 Toll free +1 800 563 6336 Website www.nemko.com Tested by Kevin Rose, EMC/Wireless Specialist Reviewed by August 25, 2011 Andrey Adelberg, Senior Wireless/EMC Specialist Date Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contain in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. Report reference ID: 180612-2TRFWL Page 2 of 18

Table of contents Section 1: Report summary ......................................................................................................................................................... 4 Section 2: Summary of test results ............................................................................................................................................. 5 Section 3: Equipment under test (EUT) details .......................................................................................................................... 6 Section 4: Engineering considerations....................................................................................................................................... 7 Section 5: Test conditions ........................................................................................................................................................... 8 Section 6: Measurement uncertainty .......................................................................................................................................... 9 Section 7: Test equipment ......................................................................................................................................................... 10 Section 8: Testing data............................................................................................................................................................... 11 8.1 Clause 15.215(c) Emission bandwidth....................................................................................................................... 11 8.2 Clause 15.249(a) Field strength of radiated emissions not in restricted bands .......................................................... 13 8.3 Clause 15.249(d) Spurious emissions (except for harmonics) ................................................................................... 16 Section 9: Block diagrams of test set-ups................................................................................................................................ 17 Report reference ID: 180612-2TRFWL Page 3 of 18

Section 1 Report summary Section 1: Report summary 1.1 Applicant Standard Innovation Corporation 1130 Morrison Drive, Suite 330 Ottawa, Ontario, Canada K2H 9N6 1.2 Manufacturer Standard Innovation Corporation 1130 Morrison Drive, Suite 330 Ottawa, Ontario, Canada K2H 9N6 1.3 Test specifications FCC 47 CFR Part 15 Subpart C, §15.249 Operation in the 902–928 MHz, 2400–2483.5 MHz, 5725–5875 MHz and 24.0–24.25 GHz 1.4 Statement of compliance In the configuration tested, the EUT was found compliant. Testing was completed against all relevant requirements of the test standard. Results obtained indicate that the product under test complies in full with the requirements tested. The test results relate only to the items tested. See “Summary of test results” for full details. 1.5 Exclusions None 1.6 Test report revision history Revision # Details of changes made to test report TRF Original report issued Report reference ID: 180612-2TRFWL Page 4 of 18

Section 2: Summary of test results Section 2: Summary of test results 2.1 FCC Part 15 general requirements’ test results Part Test description Verdict §15.207(a) Conducted limits NA1 §15.215(c) 20 dB bandwidth Pass Notes1: NA the device is a DC powered Device 2.2 FCC Part 15 Subpart C, 15.249 test results Part Test description Verdict §15.249(a) Radiated emissions not in restricted bands Pass §15.249(d) Spurious emissions (except harmonics) Pass Report reference ID: 180612-2TRFWL Page 5 of 18

Section 3 Equipment under test (EUT) details Section 3: Equipment under test (EUT) details 3.1 Sample information Receipt date July 22 2011 Nemko sample ID number 001 3.2 EUT information Product name Personal Massager Model 1400 Serial number none 3.3 Technical information Operating band 2.4–2.4835 GHz Operating frequency 2.404, 2.456 and 2.477 GHz Modulation type GFSK Occupied bandwidth 2.141 MHz Emission designator F1D Power requirements 3 Vdc (All tests were performed with new battery.) Antenna information Integral antenna 3.4 Product description and theory of operation The We-Vibe-3 (WV-3) is a battery-operated portable personal massager device intended for couples to use together during intercourse. It is inductively charged by means of an accessory battery charger cradle. Also included is a simple 1-button RF Remote Control that uses the 2.4 GHz ISM band to control the WV-3. Two vibration motors with offset weights are controlled by means of a microcontroller that causes several vibration modes to be executed. The inductive charger also features a micro that controls the battery charging process by limiting the maximum charge time when the WV-3 sits in the charge cradle. 3.5 EUT exercise details The EUT was controlled by remote computer for continuous transmission on desired channel. 3.6 EUT setup diagram . Diagram 3.6-1: Setup diagram 3.7 EUT sub assemblies NONE Description Brand name Model/Part number Serial number Rev. Consumer, Personal Massager We-Vibe-3 1400 Not assigned. - Report reference ID: 180612-2TRFWL Page 6 of 18

Section 4 Engineering considerations Section 4: Engineering considerations 4.1 Modifications incorporated in the EUT There were no modifications performed to the EUT during this assessment. . 4.2 Technical judgment None 4.3 Deviations from laboratory tests procedures No deviations were made from laboratory test procedures. Report reference ID: 180612-2TRFWL Page 7 of 18

Section 5 Test conditions Section 5: Test conditions 5.1 Atmospheric conditions Temperature: 15–30 °C Relative humidity: 20–75 % Air pressure: 86–106 kPa When it is impracticable to carry out tests under these conditions, a note to this effect stating the ambient temperature and relative humidity during the tests shall be recorded and stated. 5.2 Power supply range The normal test voltage for equipment to be connected to the mains shall be the nominal mains voltage. For the purpose of the present document, the nominal voltage shall be the declared voltage, or any of the declared voltages ±5 %, for which the equipment was designed. Report reference ID: 180612-2TRFWL Page 8 of 18

Section 6 Measurement uncertainty Section 6: Measurement uncertainty 6.1 Uncertainty of measurement Nemko Canada Inc. has calculated measurement uncertainty and is documented in EMC/MUC/001 “Uncertainty in EMC measurements.” Measurement uncertainty was calculated using the methods described in CISPR 16-4 Specification for radio disturbance and immunity measuring apparatus and methods – Part 4: Uncertainty in EMC measurements; as well as described in UKAS LAB34: The expression of Uncertainty in EMC Testing. Measurement uncertainty calculations assume a coverage factor of K=2 with 95% certainty. Report reference ID: 180612-2TRFWL Page 9 of 18

Section 7 Test equipment Section 7: Test equipment 7.1 Test equipment list Equipment Manufacturer Model no. Asset no. Cal cycle Next cal. 3 m EMI test chamber TDK SAC-3 FA002047 1 year Mar. 09/12 Bilog antenna Sunol JB3 FA002108 1 year Jan. 31/12 Horn antenna #2 EMCO 3115 FA000825 1 year Feb. 04/12 1–18 GHz pre-amplifier JCA JCA118-503 FA002091 1 year Sept. 23/11 Multimeter Fluke 16 FA001831 1 year Jan. 26/12 Receiver/spectrum analyzer Rohde & Schwarz ESU 26 FA002043 1 year April 27/12 50 Coax cable HUBER + SUHNER None FA002015 1 year Sept. 1/11 Horn antenna 18–26.5 GHz Electro-metrics SH-50/60-1 FA000479 — VOU 18–26 GHz pre-amplifier Narda BBS-1826N612 FA001550 — VOU Note: VOU = Verify on use Report reference ID: 180612-2TRFWL Page 10 of 18

Section 8 Testing data Test name Clause 15.249(a) Field strength of radiated emissions not in restricted bands Standard FCC Part 15 Subpart C Section 8: Testing data 8.1 Clause 15.215(c) Emission bandwidth Intentional radiators operating under the alternative provisions to the general emission limits, as contained in §§15.217 through 15.257 and in Subpart E of this part, must be designed to ensure that the 20 dB bandwidth of the emission, or whatever bandwidth may otherwise be specified in the specific rule section under which the equipment operates, is contained within the frequency band designated in the rule section under which the equipment is operated. The requirement to contain the designated bandwidth of the emission within the specified frequency band includes the effects from frequency sweeping, frequency hopping and other modulation techniques that may be employed as well as the frequency stability of the transmitter over expected variations in temperature and supply voltage. If a frequency stability is not specified in the regulations, it is recommended that the fundamental emission be kept within at least the central 80 % of the permitted band in order to minimize the possibility of out-of-band operation. 8.1.1 Test summary Test date Aug 2, 2011 Test engineer Kevin Rose Verdict Pass Temperature 23 °C Air pressure 1002 mbar Relative humidity 45 % 8.1.2 Observations/special notes The test was performed using peak detector of the spectrum analyzer with RBW no narrower than 1 % of the emission bandwidth. Report reference ID: 180612-2TRFWL Page 11 of 18

Section 8 Testing data Test name Clause 15.249(a) Field strength of radiated emissions not in restricted bands Standard FCC Part 15 Subpart C 8.1.3 Test data * RBW 30 kHz Marker 1 [T1 ] * RBW 30 kHz Marker 1 [T1 ] VBW 100 kHz 32.92 dBµV VBW 100 kHz 34.43 dBµV Ref 70 dBµV * Att 10 dB SWT 25 ms 2.456985577 GHz Ref 70 dBµV * Att 10 dB SWT 25 ms 2.402950321 GHz 70 Delta 1 [T1 ] 70 Delta 1 [T1 ] -0.14 dB -0.28 dB -2.035256410 MHz A 2.099358974 MHz A 60 60 1 PK 1 PK VIEW VIEW 50 50 40 40 1 1 1 1 PS PS 30 30 20 20 3DB 3DB 10 AC 10 AC 0 0 -10 -10 -20 -20 -30 -30 Center 2.404 GHz 500 kHz/ Span 5 MHz Center 2.456 GHz 500 kHz/ Span 5 MHz Date: 2.AUG.2011 22:43:17 Date: 2.AUG.2011 22:51:50 Plot 8.1-1: 20 dB bandwidth Low channel Plot 8.1-2: 20 dB bandwidth Mid channel * RBW 30 kHz Marker 1 [T1 ] VBW 100 kHz 30.77 dBµV Ref 70 dBµV * Att 10 dB SWT 25 ms 2.478137821 GHz 70 Delta 1 [T1 ] -0.02 dB -2.141923077 MHz A 60 1 PK VIEW 50 40 1 1 PS 30 20 3DB 10 AC 0 -10 -20 -30 Center 2.477 GHz 500 kHz/ Span 5 MHz Date: 2.AUG.2011 22:36:42 Plot 8.1-3: 20 dB bandwidth High channel Table 8.1-1: 20 dB bandwidth results Channel/Frequency, (MHz) 20 dB bandwidth, (MHz) 2404 2.099 2456 2.035 2477 2.141 Report reference ID: 180612-2TRFWL Page 12 of 18

Section 8 Testing data Test name Clause 15.249(a) Field strength of radiated emissions not in restricted bands Standard FCC Part 15 Subpart C 8.2 Clause 15.249(a) Field strength of radiated emissions not in restricted bands (a) Except as provided in paragraph (b) of this section, the field strength of emissions from intentional radiators operated within these frequency bands shall comply with the following: Table 8.2-1: Field strength limits Fundamental frequency Field strength of fundamental Field strength of spurious emissions (MHz) (mV/m) (dBµV/m) (µV/m) (dBµV/m) 902–928 50 94 500 54 2400–2483.5 50 94 500 54 5725–5875 50 94 500 54 24.0–24.25 250 108 2500 68 (e) As shown in §15.35(b), for frequencies above 1000 MHz, the field strength limits in paragraphs (a) and (b) of this section are based on average limits. However, the peak field strength of any emission shall not exceed the maximum permitted average limits specified above by more than 20 dB under any condition of modulation. For point-to-point operation under paragraph (b) of this section, the peak field strength shall not exceed 2500 millivolts/meter (128 dBµV/m) at 3 meters along the antenna azimuth. 8.2.1 Test summary Test date July 25, 2011 Test engineer Kevin Rose Verdict Pass Temperature 23 °C Air pressure 999.7 mbar Relative humidity 42 % 8.2.2 Observations/special notes The spectrum was searched from 30 MHz to the 10th harmonic. The EUT was measured on three orthogonal axis. All measurements were performed at a distance of 3 m. All measurements were performed: within 30–1000 MHz range: using a peak detector with 100 kHz/300 kHz RBW/VBW, above 1 GHz: using peak detector with 1 MHz/3 MHz RBW/VBW for peak results and using a duty cycle/average factor for average results calculations. Report reference ID: 180612-2TRFWL Page 13 of 18

Section 8 Testing data Test name Clause 15.249(a) Field strength of radiated emissions not in restricted bands Standard FCC Part 15 Subpart C 8.2.3 Test data Duty cycle/average factor calculations §15.35(c) When the radiated emission limits are expressed in terms of the average value of the emission, and pulsed operation is employed, the measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 seconds. Duty cycle/average factor calculations: Tx100 ms Duty cycle / average factor 20 log 10 100 ms Width of Pulse ms: 0.09391 Number of Pulses: 21 Tx100 ms 1.9721154 Duty Cycle Correction dB: -34.1014 RBW 10 MHz Marker 1 [T1 ] RBW 10 MHz Marker 1 [T1 ] VBW 10 MHz 52.49 dBµV VBW 10 MHz 57.38 dBµV Ref 87 dBµV * Att 10 dB SWT 200 µs -3.846154 µs Ref 87 dBµV * Att 10 dB SWT 20 ms -3.846154 µs Delta 1 [T1 ] 0.01 dB * 80 Delta 1 [T1 ] 1.30 dB 80 93.910256 µs A 3.846154 µs A 1 AP 1 AP 70 70 VIEW CLRWR TRG 1 1 60 60 1 1 50 50 PS PS TRG 48.6 dBµV 40 40 3DB 3DB 30 30 AC AC 20 20 10 10 0 0 -10 -10 Center 2.404 GHz 2 ms/ Center 2.404 GHz 20 µs/ Date: 25.JUL.2011 22:40:32 Date: 25.JUL.2011 22:32:29 Plot 8.2-1: Pulse width Plot 8.2-2: Number of pulses RBW 10 MHz Marker 1 [T1 ] VBW 10 MHz 61.06 dBµV Ref 87 dBµV * Att 10 dB SWT 100 ms -3.846154 µs Delta 1 [T1 ] 0.00 dB 80 3.846154 µs A 1 AP 70 CLRWR TRG 1 60 TRG 52.8 dBµV 50 PS 40 3DB 30 AC 20 10 0 -10 Center 2.404 GHz 10 ms/ Date: 25.JUL.2011 22:36:25 Plot 8.2-3: Tx within 100 ms Report reference ID: 180612-2TRFWL Page 14 of 18

Section 8 Testing data Test name Clause 15.249(a) Field strength of radiated emissions not in restricted bands Standard FCC Part 15 Subpart C 8.2.3 Test data, continued Table 8.2-2: Field strength results Peak Field Peak Field Frequency Polarization Peak limit Margin Duty cycle Avg. limit Margin strength strength (MHz) V/H (dBµV/m) (dB) factor (dB) (dBµV/m) (dB) (dBµV/m) (dBµV/m) Fundamental 2404 V 96.942 114 17.058 34.1 62.842 94 31.158 2456 V 97.676 114 16.324 34.1 63.576 94 30.424 2477 V 97.221 114 16.779 34.1 63.121 94 30.879 2404 H 94.283 114 19.717 34.1 60.183 94 33.817 2456 H 94.176 114 19.824 34.1 60.076 94 33.924 2477 H 94.164 114 19.836 34.1 60.064 94 33.936 Harmonics V 45.78 74 28.22 34.1 11.68 54 42.32 4808 H 45.94 74 28.06 34.1 11.84 54 42.16 V 49.84 74 24.16 34.1 15.74 54 38.26 4912 H 46.36 74 27.64 34.1 12.26 54 41.74 V 48.21 74 25.79 34.1 14.11 54 39.89 4954 H 47.29 74 26.71 34.1 13.19 54 40.81 V 54.94 74 19.06 34.1 20.84 54 33.16 7212 H 54.27 74 19.73 34.1 20.17 54 33.83 V 56.26 74 17.74 34.1 22.16 54 31.84 7368 H 54.52 74 19.48 34.1 20.42 54 33.58 V 55.5 74 18.5 34.1 21.4 54 32.6 7431 H 54.23 74 19.77 34.1 20.13 54 33.87 V 58.75 74 15.25 34.1 24.65 54 29.35 9616 H 57.09 74 16.91 34.1 22.99 54 31.01 V 59.32 74 14.68 34.1 25.22 54 28.78 9824 H 55.81 74 18.19 34.1 21.71 54 32.29 V 59.83 74 14.17 34.1 25.73 54 28.27 9908 H 58 74 16.00 34.1 23.9 54 30.1 Note: Field strength includes correction factor of antenna, cable loss, amplifier, and attenuators where applicable. Report reference ID: 180612-2TRFWL Page 15 of 18

Section 8 Testing data Test name Clause 15.249(d) Spurious emissions (except for harmonics) Standard FCC Part 15 Subpart C 8.3 Clause 15.249(d) Spurious emissions (except for harmonics) (d) Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits in §15.209, whichever is the lesser attenuation. Table 8.3-1: Field strength limits Frequency Field strength Measurement distance (MHz) (µV/m) (dBµV/m) (m) 0.009–0.490 2400/F 67.6−20×log10(F) 300 0.490–1.705 24000/F 87.6−20×log10(F) 30 1.705–30.0 30 29.5 30 30–88 100 40.0 3 88–216 150 43.5 3 216–960 200 46.0 3 above 960 500 54.0 3 Notes: F = fundamental frequency in kHz In the emission table above, the tighter limit applies at the band edges. For frequencies above 1 GHz the limit on peak RF emissions is 20 dB above the maximum permitted average emission limit applicable to the equipment under test. 8.3.1 Test summary Test date Aug 2, 2011 Test engineer Kevin Rose Verdict Pass Temperature 22 °C Air pressure 101.2 mbar Relative humidity 41.5 % 8.3.2 Observations/special notes The spectrum was searched from 30 MHz to the 10th harmonic. The EUT was measured on three orthogonal axis. All measurements were performed at a distance of 3 m. All measurements were performed: within 30–1000 MHz range: using a peak detector with 100 kHz/300 kHz RBW/VBW, above 1 GHz: using peak detector with 1 MHz/3 MHz RBW/VBW for peak results and using a duty cycle/average factor for average results calculations. Results: No Emissions were detected within 20dB of the Limit Report reference ID: 180612-2TRFWL Page 16 of 18

Section 9: Block diagrams of test set-ups Section 9: Block diagrams of test set-ups 9.1 Radiated emissions set-up Radio absorbing material Antenna mast Test antenna 3m Variable search height 4m Test EUT antenna Non-conducting 1m 80 cm Turntable Metal ground plane To test receiver Report reference ID: 180612-2TRFWL Page 17 of 18

This page is intentionally left blank Report reference ID: 180612-2TRFWL Page 18 of 18


Document Created: 2011-08-25 12:08:53
Document Modified: 2011-08-25 12:08:53
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC