Test Report

FCC ID: ZUE0550

Test Report

Download: PDF
FCCID_2519671

ONE WORLD OUR APPROVAL Test report 274831-1R1TRFWL Date of issue: January 12, 2015 Applicant: Standard Innovation Corporation Product: We-Vibe Classic Massager Model: 0550 FCC ID: IC Registration number: ZUE0550 9804A-0550 Specifications:  FCC 47 CFR Part 15 Subpart C, §15.249 Operation in the 902–928 MHz, 2400–2483.5 MHz, 5725–5875 MHz and 24.0–24.25 GHz  RSS-210, Issue 8, December 2010, Annex 2.9 Devices operating in frequency bands 902–928, 2400–2483.5 and 5725–5875 MHz for any application www.nemko.com Nemko Canada Inc., a testing laboratory, is SCC Accredited LAB accredited by the Standards Council of Canada. The tests included in this report are within the scope of this accreditation LAB Accrédité CCN FCC 15.249 and RSS-210 A2.9.docx; Date: September 2013 TM

Test location Company name: Nemko Canada Inc. Address: 303 River Road City: Ottawa Province: Ontario Postal code: K1V 1H2 Country: Canada Telephone: +1 613 737 9680 Facsimile: +1 613 737 9691 Toll free: +1 800 563 6336 Website: www.nemko.com Site number: FCC: 176392; IC: 2040A-4 (3 m semi anechoic chamber) Tested by: David Duchesne, Senior EMC/Wireless Specialist Reviewed by: Andrey Adelberg, Senior Wireless/EMC Specialist Date: January 12, 2015 Signature: Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contain in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. Report reference ID: 274831-1R1TRFWL Page 2 of 21

Table of Contents Section 1 Report summary ................................................................................................................................................................................. 4 1.1 Applicant .................................................................................................................................................................................................................. 4 1.2 Manufacturers .......................................................................................................................................................................................................... 4 1.3 Test specifications .................................................................................................................................................................................................... 4 1.4 Statement of compliance ......................................................................................................................................................................................... 4 1.5 Exclusions ................................................................................................................................................................................................................. 4 1.6 Test report revision history ...................................................................................................................................................................................... 4 Section 2 Summary of test results ....................................................................................................................................................................... 5 2.1 FCC Part 15 Subpart C – general requirements, test results ..................................................................................................................................... 5 2.2 FCC Part 15 Subpart C – Intentional Radiators, test results ...................................................................................................................................... 5 2.3 IC RSS-GEN, Issue 4, test results ............................................................................................................................................................................... 5 2.4 RSS-210, Issue 8, test results .................................................................................................................................................................................... 5 Section 3 Equipment under test (EUT) details ..................................................................................................................................................... 6 3.1 Sample information .................................................................................................................................................................................................. 6 3.2 EUT information ....................................................................................................................................................................................................... 6 3.3 Technical information .............................................................................................................................................................................................. 6 3.4 Product description and theory of operation ........................................................................................................................................................... 6 3.5 EUT exercise details.................................................................................................................................................................................................. 6 3.6 EUT setup Figure ...................................................................................................................................................................................................... 7 3.7 EUT sub assemblies .................................................................................................................................................................................................. 7 Section 4 Engineering considerations .................................................................................................................................................................. 8 4.1 Modifications incorporated in the EUT .................................................................................................................................................................... 8 4.2 Technical judgment .................................................................................................................................................................................................. 8 4.3 Deviations from laboratory tests procedures ........................................................................................................................................................... 8 Section 5 Test conditions .................................................................................................................................................................................... 9 5.1 Atmospheric conditions ........................................................................................................................................................................................... 9 5.2 Power supply range .................................................................................................................................................................................................. 9 Section 6 Measurement uncertainty ................................................................................................................................................................. 10 6.1 Uncertainty of measurement ................................................................................................................................................................................. 10 Section 7 Test equipment ................................................................................................................................................................................. 11 7.1 Test equipment list ................................................................................................................................................................................................. 11 Section 8 Testing data ...................................................................................................................................................................................... 12 8.1 FCC Clause 15.207(a) and RSS-Gen Clause 8.8 AC power line conducted emissions limits ..................................................................................... 12 8.2 FCC Clause 15.215© Emission bandwidth and RSS-Gen Clause 6.6 Occupied bandwidth ...................................................................................... 15 8.3 FCC Clause 15.249(a) and RSS-210 A2.9(a) Field strength of fundamental and harmonics emissions .................................................................... 17 8.4 FCC Clause 15.249(d) and RSS-210 A2.9(b) Spurious emissions (except for harmonics) ........................................................................................ 19 Section 9 Block Figures of test set-ups .............................................................................................................................................................. 21 9.1 Radiated emissions set-up...................................................................................................................................................................................... 21 9.2 Conducted emissions set-up .................................................................................................................................................................................. 21 Report reference ID: 274831-1R1TRFWL Page 3 of 21

Section 1 Report summary Section 1 Report summary 1.1 Applicant Company name : Standard Innovation Corporation Address : Suite 330, 1130 Morrison Drive City : Ottawa Province/State : Ontario Postal/Zip code : K2H 9N6 Country : Canada 1.2 Manufacturers Company name Able-One Technology Ltd Info Tronic International Ltd. Company address 9/F, Guang Ying Building, No. 88 Di Hao Road 528 Jinbi Rd., Biling Village, Pingshan Town, Longgang District ZhangMuTao Town, Dong Guan, China Shenzhen City, Guangdong Province, China 1.3 Test specifications FCC 47 CFR Part 15, Subpart C, Clause 15.249 Operation in the 902–928 MHz, 2400–2483.5 MHz, 5725–5875 MHz and 24.0–24.25 GHz RSS-210, Issue 8 Annex 2.9 Devices operating in frequency bands 902–928, 2400–2483.5 and 5725–5875 MHz for any application 1.4 Statement of compliance In the configuration tested, the EUT was found compliant. Testing was completed against all relevant requirements of the test standard. Results obtained indicate that the product under test complies in full with the requirements tested. The test results relate only to the items tested. See “Summary of test results” for full details. 1.5 Exclusions None 1.6 Test report revision history Revision # Details of changes made to test report TRF Original report issued R1 Correction to model. Report reference ID: 274831-1R1TRFWL Page 4 of 21

Section 2: Summary of test results Section 2 Summary of test results 2.1 FCC Part 15 Subpart C – general requirements, test results Part Test description Verdict §15.207(a) Conducted limits Pass §15.215(c) 20 dB emission bandwidth Pass 2.2 FCC Part 15 Subpart C – Intentional Radiators, test results Part Test description Verdict §15.249(a) Field strength of fundamental and harmonics emissions Pass §15.249(d) Spurious emissions (except harmonics) Pass 2.3 IC RSS-GEN, Issue 4, test results Clause Test description Verdict 6.6 Occupied bandwidth Pass 7.1.2 Receiver Radiated Limits Not applicable 7.1.3 Receiver Conducted Limits Not applicable 8.8 AC power lines conducted emission limits Pass Note: 1 According to sections 5.2 and 5.3 of RSS-Gen, Issue 4 the EUT does not have a stand-alone receiver neither scanner receiver, therefore exempt from receiver requirements. 2.4 RSS-210, Issue 8, test results Part Test description Verdict §A2.9a Field strength of fundamental and harmonics emissions Pass §A2.9b Spurious emissions (except harmonics) Pass Report reference ID: 274831-1R1TRFWL Page 5 of 21

Section 3: Equipment under test (EUT) details Section 3 Equipment under test (EUT) details 3.1 Sample information Receipt date December 8, 2014 Nemko sample ID number 1 3.2 EUT information Product name We-Vibe Classic Massager Model 0550 3.3 Technical information Operating band 2400–2483.5 MHz Operating frequency 2402–2480 MHz Modulation type GFSK Occupied bandwidth (99 %) 1.145 MHz Emission designator F1D Power requirements Lithium ion re-chargeable internal battery. Charging voltage 5 VDC (via USB interface of a charger base) Internal wire antenna Antenna information The EUT uses a unique antenna coupling/ non-detachable antenna to the intentional radiator. 3.4 Product description and theory of operation The EUT is a personal massager. The EUT communicate with remote controller at 2.4 GHz ISM frequency band. The EUT uses 3 advertising channels for BLE protocol. 3.5 EUT exercise details EUT was specially modified for RF testing to transmit continuously on the low, mid and high channels. Freshly charged battery was used throughout the assessment. Report reference ID: 274831-1R1TRFWL Page 6 of 21

Section 3: Equipment under test (EUT) details 3.6 EUT setup Figure USB cable 1.2m Charging Base Massager AC-DC adapter MN# RIM-C0004ADUUS-001 AC input Support Remote Figure 3.6-1: Setup diagram 3.7 EUT sub assemblies Table 3.7-1: EUT sub assemblies Description Brand name Model/Part number Serial number Charger base We-Vibe 0537 – USB Power supply RIM RIM-C0004ADUUS-001 – Report reference ID: 274831-1R1TRFWL Page 7 of 21

Section 4: Engineering consideration Section 4 Engineering considerations 4.1 Modifications incorporated in the EUT There were no modifications performed to the EUT during this assessment. 4.2 Technical judgment None 4.3 Deviations from laboratory tests procedures No deviations were made from laboratory procedures. Report reference ID: 274831-1R1TRFWL Page 8 of 21

Section 5: Test conditions Section 5 Test conditions 5.1 Atmospheric conditions Temperature 15–30 °C Relative humidity 20–75 % Air pressure 860–1060 mbar When it is impracticable to carry out tests under these conditions, a note to this effect stating the ambient temperature and relative humidity during the tests shall be recorded and stated. 5.2 Power supply range The normal test voltage for equipment to be connected to the mains shall be the nominal mains voltage. For the purpose of the present document, the nominal voltage shall be the declared voltage, or any of the declared voltages ±5 %, for which the equipment was designed. Report reference ID: 274831-1R1TRFWL Page 9 of 21

Section 6: Measurement uncertainty Section 6 Measurement uncertainty 6.1 Uncertainty of measurement Nemko Canada Inc. has calculated measurement uncertainty and is documented in EMC/MUC/001 “Uncertainty in EMC measurements.” Measurement uncertainty was calculated using the methods described in CISPR 16-4 Specification for radio disturbance and immunity measuring apparatus and methods – Part 4: Uncertainty in EMC measurements; as well as described in UKAS LAB34: The expression of Uncertainty in EMC Testing. Measurement uncertainty calculations assume a coverage factor of K=2 with 95% certainty. Report reference ID: 274831-1R1TRFWL Page 10 of 21

Section 7: Test equipment Section 7 Test equipment 7.1 Test equipment list Equipment Manufacturer Model no. Asset no. Cal cycle Next cal. 3 m EMI test chamber TDK SAC-3 FA002047 1 year Mar. 18/15 Power source California Instruments 5001ix FA002494 1 year Oct. 22/14 Receiver/spectrum analyzer Rohde & Schwarz ESU 26 FA002043 1 year Dec. 23/14 Bilog antenna (20–3000 MHz) Sunol JB3 FA002108 1 year Mar. 12/15 50 Ω coax cable C.C.A. None FA002555 1 year June 23/15 50 Ω coax cable Huber + Suhner None FA002074 1 year June 23/15 Horn antenna (1–18 GHz) EMCO 3115 FA000825 1 year Mar. 10/15 Pre-amplifier (1–18 GHz) JCA JCA118-503 FA002091 1 year June 23/15 LISN Rohde & Schwarz ENV216 FA002023 1 year Dec. 28/14 Power source California Instruments 3001i FA001021 1 year June 27/15 50 Ω coax cable C.C.A. None FA002556 1 year June 23/15 Receiver/spectrum analyzer Rohde & Schwarz ESU 40 FA002071 1 year Mar. 20/15 Note: NCR - no calibration required Report reference ID: 274831-1R1TRFWL Page 11 of 21

Section 8 Testing data Test name FCC Clause 15.207(a) and RSS-Gen Clause 8.8 AC power line conducted emissions limits Specification FCC Part 15 Subpart C and RSS-Gen, Issue 4 Section 8 Testing data 8.1 FCC Clause 15.207(a) and RSS-Gen Clause 8.8 AC power line conducted emissions limits 8.1.1 Definitions and limits FCC: Except as shown in paragraphs (b) and (c) of this section, for an intentional radiator that is designed to be connected to the public utility (AC) power line, the radio frequency voltage that is conducted back onto the AC power line on any frequency or frequencies, within the band 150 kHz to 30 MHz, shall not exceed the limits in the following table, as measured using a 50 μH/50 Ω line impedance stabilization network (LISN). Compliance with the provisions of this paragraph shall be based on the measurement of the radio frequency voltage between each power line and ground at the power terminal. The lower limit applies at the boundary between the frequency ranges. RSS-Gen Clause 8.8 AC Power Line Conducted Emissions Limits for Licence-Exempt Radio Apparatus A radio apparatus that is designed to be connected to the public utility (AC) power line shall ensure that the radio frequency voltage, which is conducted back onto the AC power line on any frequency or frequencies within the band 150 kHz-30 MHz, shall not exceed the limits in Table 8.1–1 below. Unless the requirements applicable to a given device state otherwise, for any radio apparatus equipped to operate from the public utility AC power supply either directly or indirectly (such as with a battery charger), the radio frequency voltage of emissions conducted back onto the AC power lines in the frequency range of 0.15 MHz to 30 MHz shall not exceed the limits shown in Table 8.1–1 below. The more stringent limit applies at the frequency range boundaries. Table 8.1-1: Conducted emissions limit Frequency of emission, Conducted limit, dBµV MHz Quasi-peak Average 0.15–0.5 66 to 56* 56 to 46* 0.5–5 56 46 5–30 60 50 Note: * - Decreases with the logarithm of the frequency. 8.1.2 Test summary Verdict Pass Test date December 11, 2014 Temperature 24.4 °C Test engineer David Duchesne Air pressure 991.5 mbar Test location Ottawa Relative humidity 32.1 % Report reference ID: 274831-1R1TRFWL Page 12 of 21

Section 8 Testing data Test name FCC Clause 15.207(a) and RSS-Gen Clause 8.8 AC power line conducted emissions limits Specification FCC Part 15 Subpart C and RSS-Gen, Issue 4 8.1.3 Observations, settings and special notes Port under test AC port of AC-to-USB adapter EUT setup configuration Table top Measurement details A preview measurement was generated with the receiver in continuous scan mode. Emissions detected within 6 dB or above limit were re-measured with the appropriate detector against the correlating limit and recorded as the final measurement. Receiver settings: Resolution bandwidth 9 kHz Video bandwidth 30 kHz Detector mode Peak and Average (preview measurement); Quasi-peak and Average (final measurement) Trace mode Max Hold Measurement time 100 ms (preview measurement); 1000 ms (final measurement) Report reference ID: 274831-1R1TRFWL Page 13 of 21

Section 8 Testing data Test name FCC Clause 15.207(a) and RSS-Gen Clause 8.8 AC power line conducted emissions limits Specification FCC Part 15 Subpart C and RSS-Gen, Issue 4 8.1.4 Test data 75 70 65 60 55 50 45 Level in dBµV 40 35 30 25 20 15 10 5 0 150k 300 400 500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz 120V AC /60H z, Ph ase (Ch arg in g State ) C ISPR 22 M ain s Q P C lass B C ISPR 22 M ain s A V C lass B Pre view Re sult 1-PK+ Pre view Re sult 2-A VG Plot 8.1-1: Conducted emissions on phase line 75 70 65 60 55 50 45 Level in dBµV 40 35 30 25 20 15 10 5 0 150k 300 400 500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz 120V AC 60Hz, Ne u tral (Ch arg ing ) CISPR 22 M ain s Q P Class B CISPR 22 M ain s A V Class B Pre view Re sult 1-PK+ Pre view Re sult 2-A VG Plot 8.1-2: Conducted emissions on neutral line Report reference ID: 274831-1R1TRFWL Page 14 of 21

Section 8 Testing data Test name FCC Clause 15.215(c) Emission Bandwidth and RSS Gen Clause 6.6 Occupied bandwidth Specification FCC Part 15 Subpart C and RSS-Gen, Issue 4 8.2 FCC Clause 15.215(c) Emission bandwidth and RSS-Gen Clause 6.6 Occupied bandwidth 8.2.1 Definitions and limits FCC Part 15.215(c) Intentional radiators operating under the alternative provisions to the general emission limits, as contained in §§15.217 through 15.257 and in Subpart E of this part, must be designed to ensure that the 20 dB bandwidth of the emission, or whatever bandwidth may otherwise be specified in the specific rule section under which the equipment operates, is contained within the frequency band designated in the rule section under which the equipment is operated. The requirement to contain the designated bandwidth of the emission within the specified frequency band includes the effects from frequency sweeping, frequency hopping and other modulation techniques that may be employed as well as the frequency stability of the transmitter over expected variations in temperature and supply voltage. If frequency stability is not specified in the regulations, it is recommended that the fundamental emission be kept within at least the central 80 % of the permitted band in order to minimize the possibility of out-of-band operation. RSS-Gen Clause 6.6 Occupied bandwidth When an occupied bandwidth value is not specified in the applicable RSS, the transmitted signal bandwidth to be reported is to be its 99 percent emission bandwidth, as calculated or measured. The transmitter shall be operated at its maximum carrier power measured under normal test conditions. The span of the analyzer shall be set to capture all products of the modulation process, including the emission skirts. The resolution bandwidth shall be set to as close to 1 percent of the selected span as is possible without being below 1 percent. The video bandwidth shall be set to 3 times the resolution bandwidth. Video averaging is not permitted. Where practical, a sampling detector shall be used since a peak or, peak hold, may produce a wider bandwidth than actual. The trace data points are recovered and are directly summed in linear terms. The recovered amplitude data points, beginning at the lowest frequency, are placed in a running sum until 0.5 percent of the total is reached and that frequency recorded. The process is repeated for the highest frequency data points. This frequency is recorded. The span between the two recorded frequencies is the occupied bandwidth. 8.2.2 Test summary Verdict Pass Test date December 17, 2014 Temperature 25.1 °C Test engineer David Duchesne Air pressure 995.0 mbar Test location Ottawa Relative humidity 35.3 % 8.2.3 Observations, settings and special notes Spectrum analyzer settings: Resolution bandwidth: 100 kHz Video bandwidth: 300 kHz Detector mode: Peak Trace mode: Max Hold Function: 20 dB BW (for FCC); 99 % bandwidth (for IC) Report reference ID: 274831-1R1TRFWL Page 15 of 21

Section 8 Testing data Test name FCC Clause 15.215(c) Emission Bandwidth and RSS Gen Clause 6.6 Occupied bandwidth Specification FCC Part 15 Subpart C and RSS-Gen, Issue 4 8.2.4 Test data * RBW 100 kHz Marker 1 [T1 ] * RBW 100 kHz Marker 1 [T1 ] VBW 300 kHz -8.00 dBm VBW 300 kHz -8.02 dBm Ref 10 dBm Att 35 dB SWT 2.5 ms 2.402283654 GHz Ref 10 dBm Att 15 dB SWT 2.5 ms 2.402280449 GHz 10 ndB [T1] 20.00 dB 10 OBW 1.145833333 MHz BW 1.258012821 MHz Temp 1 [T1 OBW] Temp 1 [T1 ndB] A -22.61 dBm A 0 0 -27.96 dBm 2.401503205 GHz 1 PK 1 1 PK 1 2.401426282 GHz Temp 2 [T1 OBW] VIEW MAXH -10 Temp 2 [T1 ndB] -10 -25.81 dBm -27.97 dBm 2.402649038 GHz 2.402684295 GHz -20 -20 T1 T2 T1 T2 PS PS -30 -30 -40 -40 3DB 3DB -50 AC -50 AC -60 -60 -70 -70 -80 -80 -90 -90 Center 2.40224359 GHz 500 kHz/ Span 5 MHz Center 2.402080128 GHz 500 kHz/ Span 5 MHz Date: 17.DEC.2014 09:46:37 Date: 17.DEC.2014 09:41:27 Plot 8.2-1: 20 dB bandwidth example Plot 8.2-2: 99 % occupied bandwidth example Table 8.2-1: 20 dB bandwidth results Lower 20 dBc Freq., Lower 20 dBc Freq. Lower margin, MHz Upper 20 dBc Freq., Upper 20 dBc Freq. Upper margin, MHz MHz limit, MHz MHz limit, MHz 2401.42 2400.00 1.42 2480.67 2483.50 2.83 Table 8.2-2: 99% bandwidth results Frequency 99 % bandwidth (MHz) (MHz) 2402 1.145 2440 1.137 2480 1.098 Report reference ID: 274831-1R1TRFWL Page 16 of 21

Section 8 Testing data Test name FCC Clause 15.249(b) and RSS Gen 7.2.5 Field strength of fundamental and harmonics emissions Specification FCC Part 15 Subpart C and RSS-210 A2.9 8.3 FCC Clause 15.249(a) and RSS-210 A2.9(a) Field strength of fundamental and harmonics emissions 8.3.1 Definitions and limits In addition to the provisions of §15.205 and RSS Gen the field strength of emissions from intentional radiators operated under this section shall not exceed the following: Table 8.3-1: Field strength limits Fundamental frequencies Field strength of fundamental Field strength of harmonics (MHz) (mV/m) (dBµV/m) (µV/m) (dBµV/m) 902–928 50 94 500 54 2400–2483.5 50 94 500 54 5725–5875 50 94 500 54 24.0–24.25* 250 108 2500 68 Note: * - Only FCC band. (e) As shown in §15.35(b), for frequencies above 1000 MHz, the field strength limits in paragraphs (a) and (b) of this section are based on average limits. However, the peak field strength of any emission shall not exceed the maximum permitted average limits specified above by more than 20 dB under any condition of modulation. For point-to-point operation under paragraph (b) of this section, the peak field strength shall not exceed 2500 millivolts/meter (128 dBµV/m) at 3 meters along the antenna azimuth. 8.3.2 Test summary Verdict Pass Test date December 18, 2014 Temperature 26.2 °C Test engineer David Duchesne Air pressure 998.7 mbar Test location Ottawa Relative humidity 33.8 % 8.3.3 Observations, settings and special notes  th The spectrum was searched from 2.4 GHz to the 10 harmonic at a distance of 3 m.  The test was performed with vertical and horizontal antenna polarizations and the EUT was measured on three orthogonal axis, only the highest emissions were reported. Spectrum analyzer/receiver settings: Resolution bandwidth: 1 MHz Video bandwidth: 3 MHz Detector mode: Peak Trace mode: Max Hold Average measurements: Duty cycle/average factor was used for calculation of the average level. Report reference ID: 274831-1R1TRFWL Page 17 of 21

Section 8 Testing data Test name FCC Clause 15.249(b) and RSS Gen 7.2.5 Field strength of fundamental and harmonics emissions Specification FCC Part 15 Subpart C and RSS-210 A2.9 8.3.4 Test data, continued Duty cycle correction factor measurement: RBW 1 MHz Marker 1 [T1 ] RBW 1 MHz Delta 2 [T1 ] VBW 3 MHz -50.65 dBm VBW 3 MHz 0.22 dB Ref -20 dBm Att 5 dB SWT 100 ms 128.205128 µs Ref -20 dBm Att 5 dB SWT 300 µs 201.442308 µs -20 Delta 2 [T1 ] -20 Marker 1 [T1 ] -0.30 dB -53.16 dBm 83.173077 ms A 1.538462 µs A -30 -30 1 PK * 1 PK * VIEW TRG VIEW TRG -40 -40 1 2 -50 1 -50 2 -60 -60 TRG -68 dBm TRG -68 dBm -70 -70 3DB 3DB -80 -80 -90 -90 -100 -100 -110 -110 -120 -120 Center 2.425 GHz 10 ms/ Center 2.425 GHz 30 µs/ Date: 20.SEP.2013 15:47:28 Plot 8.3-1: 100 ms transmissions Date: 20.SEP.2013 Plot 8.3-2: Single transmission duration 15:49:03 Duty cycle calculation: 20 × log10 (Tx100 ms / 100 ms) = 20 × log10 (2 × 201.4 µs / 100 ms) = −47.89 dB Table 8.3-2: Field strength of fundamental measurement results Peak field Average Frequency, Peak limit, Duty cycle Average field Margin, Channel strength, Margin, (dB) limit, (MHz) (dBµV/m) factor, (dB) strength, (dBµV/m) (dB) (dBµV/m) (dBµV/m) Low 2402 90.57 114.00 23.43 -47.89 42.68 94.00 51.32 Mid 2440 87.71 114.00 26.29 -47.89 39.82 94.00 54.18 High 2480 85.27 114.00 28.73 -47.89 37.38 94.00 56.62 Note: Field strength includes correction factor of antenna, cable loss, amplifier, and attenuators where applicable. Average field strength was calculated as follows: Peak field strength (dBµV/m) + duty cycle factor (dB). Table 8.3-3: Field strength of harmonics measurement results Peak field Average Frequency, Peak limit, Duty cycle Average field Margin, Channel strength, Margin, (dB) limit, (MHz) (dBµV/m) factor, (dB) strength, (dBµV/m) (dB) (dBµV/m) (dBµV/m) Low 4804 57.25 74.00 16.75 -47.89 9.36 54.00 44.64 Mid 4880 58.94 74.00 15.06 -47.89 11.05 54.00 42.95 High 4960 59.23 74.00 14.77 -47.89 11.34 54.00 42.66 Note: Field strength includes correction factor of antenna, cable loss, amplifier, and attenuators where applicable. Average field strength was calculated as follows: Peak field strength (dBµV/m) + duty cycle factor (dB). Report reference ID: 274831-1R1TRFWL Page 18 of 21

Section 8 Testing data Test name FCC Clause 15.249(d) and RSS 210 A2.9 Spurious emissions (except for harmonics) Specification FCC Part 15 Subpart C and RSS-210 A2.9 8.4 FCC Clause 15.249(d) and RSS-210 A2.9(b) Spurious emissions (except for harmonics) 8.4.1 Definitions and limits Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits in FCC §15.209 and RSS-Gen, whichever is the lesser attenuation. Table 8.4-1: Field strength of spurious emissions Frequency Field strength Measurement distance (MHz) (µV/m) (dBµV/m) (m) 30–88 100 40.0 3 88–216 150 43.5 3 216–960 200 46.0 3 above 960 500 54.0 3 Notes:  In the emission table above, the tighter limit applies at the band edges.  For frequencies above 1 GHz the limit on peak RF emissions is 20 dB above the maximum permitted average emission limit applicable to the equipment under test. 8.4.2 Test summary Verdict Pass Test date December 18, 2014 Temperature 26.2 °C Test engineer David Duchesne Air pressure 998.7 mbar Test location Ottawa Relative humidity 33.8 % 8.4.3 Observations, settings and special notes th The spectrum was searched from 30 MHz to the 10 harmonic at a distance of 3 m. The test was performed with vertical and horizontal antenna polarizations and the EUT was measured on three orthogonal axis, only the highest emissions were reported. For duty cycle factor calculation please refer to section 8.3. Spectrum analyzer/receiver settings for frequencies below 1 GHz: Resolution bandwidth: 120 kHz Video bandwidth: 300 kHz Detector mode: Quasi-Peak Trace mode: Max Hold Spectrum analyzer/receiver settings for frequencies above 1 GHz: Resolution bandwidth: 1 MHz Video bandwidth: 3 MHz Detector mode: Peak Trace mode: Max Hold Average measurements: Duty cycle/average factor was used for calculation of the average level. Report reference ID: 274831-1R1TRFWL Page 19 of 21

Section 8 Testing data Test name FCC Clause 15.249(d) and RSS 210 A2.9 Spurious emissions (except for harmonics) Specification FCC Part 15 Subpart C and RSS-210 A2.9 8.4.4 Test data * RBW 1 MHz Marker 2 [T1 ] * RBW 1 MHz Marker 2 [T1 ] VBW 3 MHz 69.24 dBµV VBW 3 MHz 62.69 dBµV Ref 100 dBµV * Att 0 dB SWT 2.5 ms 2.400000000 GHz Ref 100 dBµV * Att 0 dB SWT 2.5 ms 2.483500000 GHz 100 Marker 1 [T1 ] 100 Marker 1 [T1 ] 89.33 dBµV 85.66 dBµV 1 2.402307692 GHz A 2.479782051 GHz A 90 90 1 1 PK 1 PK MAXH VIEW 80 80 D1 74 dBµV D1 74 dBµV 2 TDS TDS 70 70 2 PS PS 60 60 50 50 3DB 3DB 40 AC 40 AC 30 30 20 20 10 10 F1 F1 0 0 Center 2.4 GHz 1 MHz/ Span 10 MHz Center 2.4835 GHz 1 MHz/ Span 10 MHz Date: 18.DEC.2014 14:36:54 Date: 18.DEC.2014 14:40:14 Plot 8.4-1: Lower band edge measurement Plot 8.4-2: Upper band edge measurement Table 8.4-2: Field strength of spurious emissions measurement results Peak field Average Frequency, Peak limit, Duty cycle Average field Margin, Channel strength, Margin, (dB) limit, (MHz) (dBµV/m) factor, (dB) strength, (dBµV/m) (dB) (dBµV/m) (dBµV/m) Low 2400.0 69.24 74.00 4.76 -47.89 21.35 54.00 32.65 High 2483.5 62.69 74.00 11.31 -47.89 14.80 54.00 39.20 Note: Field strength includes correction factor of antenna, cable loss, amplifier, and attenuators where applicable. Average field strength was calculated as follows: Peak field strength (dBµV/m) + duty cycle factor (dB). Report reference ID: 274831-1R1TRFWL Page 20 of 21

Section 9: Block diagrams of test set-ups Section 9 Block Figures of test set-ups 9.1 Radiated emissions set-up Radio absorbing material Antenna mast Test antenna 4m 3m Test EUT antenna Non- conducting table 1m 0.8 m Metal ground plane Turn table Receiver 9.2 Conducted emissions set-up Vertical ground plane 40 cm from EUT EUT 0.8 m Power supply Non- LISN conducting table 0.8 m Horizontal ground plane Receiver Report reference ID: 274831-1R1TRFWL Page 21 of 21


Document Created: 2015-01-12 14:48:38
Document Modified: 2015-01-12 14:48:38
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC