SAR 2

FCC ID: ZU3UNNECTOECOBT

RF Exposure Info

Download: PDF
FCCID_1668413

GSM 850-Right Head Cheek Low CH128 .......................................................................................2
GSM 850-Right Head Cheek Middle CH190 ...................................................................................3
GSM 850-Right Head Cheek High CH251.......................................................................................4
GSM 850-Right Head Tilted Low CH128 ........................................................................................5
GSM 850-Right Head Tilted Middle CH190....................................................................................6
GSM 850-Right Head Tilted High CH251 .......................................................................................7
GSM 850-Left Head Cheek Low CH128..........................................................................................8
GSM 850-Left Head Cheek Middle CH190 .....................................................................................9
GSM 850-Left Head Cheek High CH251.......................................................................................10
GSM 850-Left Head Tilted Low CH128 ........................................................................................11
GSM 850-Left Head Tilted Middle CH190 ....................................................................................12
GSM 850-Left Head Tilted High CH251........................................................................................13
PCS-1900-Right Head Cheek Low CH512.....................................................................................14
PCS-1900-Right Head Cheek Middle CH661 ................................................................................15
PCS-1900-Right Head Cheek High CH810 ....................................................................................16
PCS-1900-Right Head Tilted Low CH512 .....................................................................................17
PCS-1900-Right Head Tilted Middle CH661 .................................................................................18
PCS-1900-Right Head Tilted High CH810.....................................................................................19
PCS 1900-Left Head Cheek Low CH512 .......................................................................................20
PCS 1900-Left Head Cheek Middle CH661 ...................................................................................21
PCS 1900-Left Head Cheek High CH810 ......................................................................................22
PCS 1900-Left Head Tilted Low CH512........................................................................................23
PCS 1900-Left Head Tilted Middle CH661....................................................................................24
PCS 1900-Left Head Tilted High CH810 .......................................................................................25
GSM 850-Body Up High CH251....................................................................................................26
GSM 850-Body Down High CH251...............................................................................................27
GPRS 850-Body Up High CH251 ..................................................................................................28
GPRS850-Body Down High CH251 ..............................................................................................29
PCS1900-Body Up Low CH512.....................................................................................................30
PCS1900-Body Down Low CH512 ................................................................................................31
GPRS1900-Body Up Low CH512 ..................................................................................................32
GPRS1900-Body Down Low CH512 .............................................................................................33


Test Laboratory: Compliance Certification Services Inc.   August 10, 2011
GSM 850-Right Head Cheek Low CH128
DUT: GSM Mobile Phone; Type: U-100-2; Serial: 862718007015336
Communication System: Generic GSM; Communication System Band: GSM 850
(824.0 - 849.0 MHz); Frequency: 824.2 MHz; Communication System PAR: 9.03 dB
Medium parameters used (interpolated): f = 824.2 MHz; σ = 0.88 mho/m; εr = 41.628; ρ
= 1000 kg/m3
Phantom section: Right Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY5 Configuration:
   • Probe: EX3DV4 - SN3755; ConvF(8.99, 8.99, 8.99); Calibrated: 1/20/2011
   • Sensor-Surface: 2.5mm (Mechanical Surface Detection)
   • Electronics: DAE4 Sn1245; Calibrated: 1/11/2011
   • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609
   • Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2
       (2595)
GSM850/Right Head Cheek Low CH128/Area Scan (6x9x1):
Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.520 mW/g
GSM850/Right Head Cheek Low CH128/Zoom Scan (7x7x7)/Cube 0:
Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 12.659 V/m; Power Drift = -0.01 dB
Peak SAR (extrapolated) = 0.493 W/kg
SAR(1 g) = 0.401 mW/g; SAR(10 g) = 0.317 mW/g
Maximum value of SAR (measured) = 0.416 mW/g


Test Laboratory: Compliance Certification Services Inc.   August 10, 2011

GSM 850-Right Head Cheek Middle CH190
DUT: GSM Mobile Phone; Type: U-100-2; Serial: 862718007015336
Communication System: Generic GSM; Communication System Band: GSM 850
(824.0 - 849.0 MHz); Frequency: 836.6 MHz; Communication System PAR: 9.03 dB
Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.89 mho/m; εr = 41.478; ρ
= 1000 kg/m3
Phantom section: Right Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY5 Configuration:
   • Probe: EX3DV4 - SN3755; ConvF(8.99, 8.99, 8.99); Calibrated: 1/20/2011
   • Sensor-Surface: 2.5mm (Mechanical Surface Detection)
   • Electronics: DAE4 Sn1245; Calibrated: 1/11/2011
   • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609
   • Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2
       (2595)
GSM850/Right Head Cheek Middle CH190/Area Scan (6x9x1):
Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.495 mW/g
GSM850/Right Head Cheek Middle CH190/Zoom Scan (7x7x7)/Cube 0:
Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 10.307 V/m; Power Drift = -0.04 dB
Peak SAR (extrapolated) = 0.557 W/kg
SAR(1 g) = 0.455 mW/g; SAR(10 g) = 0.357 mW/g
Maximum value of SAR (measured) = 0.472 mW/g


Test Laboratory: Compliance Certification Services Inc.   August 10, 2011
GSM 850-Right Head Cheek High CH251
DUT: GSM Mobile Phone; Type: U-100-2; Serial: 862718007015336
Communication System: Generic GSM; Communication System Band: GSM 850
(824.0 - 849.0 MHz); Frequency: 848.8MHz;Communication System PAR: 9.03 dB
Medium parameters used (interpolated): f = 848.8MHz; σ = 0.899 mho/m; εr = 41.327;
ρ = 1000 kg/m3
Phantom section: Right Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY5 Configuration:
    • Probe: EX3DV4 - SN3755; ConvF(8.99, 8.99, 8.99); Calibrated: 1/20/2011
    • Sensor-Surface: 2.5mm (Mechanical Surface Detection)
    • Electronics: DAE4 Sn1245; Calibrated: 1/11/2011
    • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609
    • Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2
        (2595)
GSM850/Right Head Cheek High CH251/Area Scan (6x9x1):
Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.489 mW/g
GSM850/Right Head Cheek High CH251/Zoom Scan (7x7x7)/Cube 0:
Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 10.635 V/m; Power Drift = 0.08 dB
Peak SAR (extrapolated) = 0.588 W/kg
SAR(1 g) = 0.472 mW/g; SAR(10 g) = 0.372 mW/g
Maximum value of SAR (measured) = 0.491 mW/g


Test Laboratory: Compliance Certification Services Inc.   August 10, 2011
GSM 850-Right Head Tilted Low CH128
DUT: GSM Mobile Phone; Type: U-100-2; Serial: 862718007015336
Communication System: Generic GSM; Communication System Band: GSM 850
(824.0 - 849.0 MHz); Frequency: 824.2 MHz;Communication System PAR: 9.03 dB
Medium parameters used (interpolated): f = 824.2 MHz; σ = 0.88 mho/m; εr = 41.628; ρ
= 1000 kg/m3
Phantom section: Right Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY5 Configuration:
   • Probe: EX3DV4 - SN3755; ConvF(8.99, 8.99, 8.99); Calibrated: 1/20/2011
   • Sensor-Surface: 2.5mm (Mechanical Surface Detection)
   • Electronics: DAE4 Sn1245; Calibrated: 1/11/2011
   • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609
   • Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2
       (2595)
GSM850/Right Head Tilted Low CH128/Area Scan (6x9x1):
Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.307 mW/g
GSM850/Right Head Tilted Low CH128/Zoom Scan (7x7x7)/Cube 0:
Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 14.052 V/m; Power Drift = -0.12 dB
Peak SAR (extrapolated) = 0.346 W/kg
SAR(1 g) = 0.286 mW/g; SAR(10 g) = 0.225 mW/g
Maximum value of SAR (measured) = 0.296 mW/g


Test Laboratory: Compliance Certification Services Inc.   August 10, 2011
GSM 850-Right Head Tilted Middle CH190
DUT: GSM Mobile Phone; Type: U-100-2; Serial: 862718007015336
Communication System: Generic GSM; Communication System Band: GSM 850
(824.0 - 849.0 MHz); Frequency: 836.6 MHz;Communication System PAR: 9.03 dB
Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.89 mho/m; εr = 41.478; ρ
= 1000 kg/m3
Phantom section: Right Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY5 Configuration:
   • Probe: EX3DV4 - SN3755; ConvF(8.99, 8.99, 8.99); Calibrated: 1/20/2011
   • Sensor-Surface: 2.5mm (Mechanical Surface Detection)
   • Electronics: DAE4 Sn1245; Calibrated: 1/11/2011
   • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609
   • Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2
       (2595)
GSM850/Right Head Tilted Middle CH190/Area Scan (6x9x1):
Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.387 mW/g
GSM850/Right Head Tilted Middle CH190/Zoom Scan (7x7x7)/Cube 0:
Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 14.566 V/m; Power Drift = 0.05 dB
Peak SAR (extrapolated) = 0.424 W/kg
SAR(1 g) = 0.352 mW/g; SAR(10 g) = 0.278 mW/g
Maximum value of SAR (measured) = 0.364 mW/g


Test Laboratory: Compliance Certification Services Inc.   August 10, 2011
GSM 850-Right Head Tilted High CH251
DUT: GSM Mobile Phone; Type: U-100-2; Serial: 862718007015336
Communication System: Generic GSM; Communication System Band: GSM 850
(824.0 - 849.0 MHz); Frequency: 848.8MHz;Communication System PAR: 9.03 dB
Medium parameters used (interpolated): f = 848.8MHz; σ = 0.899 mho/m; εr = 41.327;
ρ = 1000 kg/m3
Phantom section: Right Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY5 Configuration:
    • Probe: EX3DV4 - SN3755; ConvF(8.99, 8.99, 8.99); Calibrated: 1/20/2011
    • Sensor-Surface: 2.5mm (Mechanical Surface Detection)
    • Electronics: DAE4 Sn1245; Calibrated: 1/11/2011
    • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609
    • Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2
        (2595)
GSM850/Right Head Tilted High CH251/Area Scan (6x9x1):
Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.333 mW/g
GSM850/Right Head Tilted High CH251/Zoom Scan (7x7x9)/Cube 0:
Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 13.407 V/m; Power Drift = -0.07 dB
Peak SAR (extrapolated) = 0.382 W/kg
SAR(1 g) = 0.320 mW/g; SAR(10 g) = 0.252 mW/g
Maximum value of SAR (measured) = 0.349 mW/g


Test Laboratory: Compliance Certification Services Inc.   August 10, 2011
GSM 850-Left Head Cheek Low CH128
DUT: GSM Mobile Phone; Type: U-100-2; Serial: 862718007015336
Communication System: Generic GSM; Communication System Band: GSM 850
(824.0 - 849.0 MHz); Frequency: 824.2 MHz;Communication System PAR: 9.03 dB
Medium parameters used (interpolated): f = 824.2 MHz; σ = 0.88 mho/m; εr = 41.628; ρ
= 1000 kg/m3
Phantom section: Left Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY5 Configuration:
   • Probe: EX3DV4 - SN3755; ConvF(8.99, 8.99, 8.99); Calibrated: 1/20/2011
   • Sensor-Surface: 2.5mm (Mechanical Surface Detection)
   • Electronics: DAE4 Sn1245; Calibrated: 1/11/2011
   • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609
   • Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2
       (2595)
GSM850/Left Head Cheek Low CH128/Area Scan (6x9x1):
Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.388 mW/g
GSM850/Left Head Cheek Low CH128/Zoom Scan (7x7x9)/Cube 0:
Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 10.077 V/m; Power Drift = 0.0057 dB
Peak SAR (extrapolated) = 0.450 W/kg
SAR(1 g) = 0.365 mW/g; SAR(10 g) = 0.287 mW/g
Maximum value of SAR (measured) = 0.399 mW/g


Test Laboratory: Compliance Certification Services Inc.   August 10, 2011
GSM 850-Left Head Cheek Middle CH190
DUT: GSM Mobile Phone; Type: U-100-2; Serial: 862718007015336
Communication System: Generic GSM; Communication System Band: GSM 850
(824.0 - 849.0 MHz); Frequency: 836.6 MHz;Communication System PAR: 9.03 dB
Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.89 mho/m; εr = 41.478; ρ
= 1000 kg/m3
Phantom section: Left Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY5 Configuration:
   • Probe: EX3DV4 - SN3755; ConvF(8.99, 8.99, 8.99); Calibrated: 1/20/2011
   • Sensor-Surface: 2.5mm (Mechanical Surface Detection)
   • Electronics: DAE4 Sn1245; Calibrated: 1/11/2011
   • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609
   • Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2
       (2595)

GSM850/Left Head Cheek Middle CH190/Area Scan (6x9x1):
Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.415 mW/g
GSM850/Left Head Cheek Middle CH190/Zoom Scan (7x7x9)/Cube 0:
Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 10.355 V/m; Power Drift = -0.0016 dB
Peak SAR (extrapolated) = 0.506 W/kg
SAR(1 g) = 0.403 mW/g; SAR(10 g) = 0.317 mW/g
Maximum value of SAR (measured) = 0.447 mW/g


Test Laboratory: Compliance Certification Services Inc.   August 10, 2011
GSM 850-Left Head Cheek High CH251
DUT: GSM Mobile Phone; Type: U-100-2; Serial: 862718007015336
Communication System: Generic GSM; Communication System Band: GSM 850
(824.0 - 849.0 MHz); Frequency: 848.8MHz;Communication System PAR: 9.191 dB
Medium parameters used (interpolated): f = 848.8MHz; σ = 0.899 mho/m; εr = 41.327;
ρ = 1000 kg/m3
Phantom section: Left Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY5 Configuration:
    • Probe: EX3DV4 - SN3755; ConvF(8.99, 8.99, 8.99); Calibrated: 1/20/2011
    • Sensor-Surface: 2.5mm (Mechanical Surface Detection)
    • Electronics: DAE4 Sn1245; Calibrated: 1/11/2011
    • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609
    • Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2
        (2595)
GSM850/Left Head Cheek High CH251/Area Scan (6x9x1):
Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.421 mW/g
GSM850/Left Head Cheek High CH251/Zoom Scan (7x7x9)/Cube 0:
Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 9.927 V/m; Power Drift = 0.08 dB
Peak SAR (extrapolated) = 0.452 W/kg
SAR(1 g) = 0.378 mW/g; SAR(10 g) = 0.301 mW/g
Maximum value of SAR (measured) = 0.415 mW/g


Test Laboratory: Compliance Certification Services Inc.   August 10, 2011
GSM 850-Left Head Tilted Low CH128
DUT: GSM Mobile Phone; Type: U-100-2; Serial: 862718007015336
Communication System: Generic GSM; Communication System Band: GSM 850
(824.0 - 849.0 MHz); Frequency: 824.2 MHz;Communication System PAR: 9.03 dB
Medium parameters used (interpolated): f = 824.2 MHz; σ = 0.88 mho/m; εr = 41.628; ρ
= 1000 kg/m3
Phantom section: Left Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY5 Configuration:
   • Probe: EX3DV4 - SN3755; ConvF(8.99, 8.99, 8.99); Calibrated: 1/20/2011
   • Sensor-Surface: 2.5mm (Mechanical Surface Detection)
   • Electronics: DAE4 Sn1245; Calibrated: 1/11/2011
   • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609
   • Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2
       (2595)

GSM850/Left Head Tilted Low CH128/Area Scan (6x9x1):
Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.348 mW/g
GSM850/Left Head Tilted Low CH128/Zoom Scan (7x7x9)/Cube 0:
Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 14.311 V/m; Power Drift = 0.03 dB
Peak SAR (extrapolated) = 0.384 W/kg
SAR(1 g) = 0.325 mW/g; SAR(10 g) = 0.259 mW/g
Maximum value of SAR (measured) = 0.357 mW/g


Test Laboratory: Compliance Certification Services Inc.   August 10, 2011
GSM 850-Left Head Tilted Middle CH190
DUT: GSM Mobile Phone; Type: U-100-2; Serial: 862718007015336
Communication System: Generic GSM; Communication System Band: GSM 850
(824.0 - 849.0 MHz); Frequency: 836.6 MHz;Communication System PAR: 9.03 dB
Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.89 mho/m; εr = 41.478; ρ
= 1000 kg/m3
Phantom section: Left Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY5 Configuration:
   • Probe: EX3DV4 - SN3755; ConvF(8.99, 8.99, 8.99); Calibrated: 1/20/2011
   • Sensor-Surface: 2.5mm (Mechanical Surface Detection)
   • Electronics: DAE4 Sn1245; Calibrated: 1/11/2011
   • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609
   • Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2
       (2595)
GSM850/Left Head Tilted Middle CH190/Area Scan (6x9x1):
Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.375 mW/g
GSM850/Left Head Tilted Middle CH190/Zoom Scan (7x7x9)/Cube 0:
Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 14.599 V/m; Power Drift = 0.13 dB
Peak SAR (extrapolated) = 0.435 W/kg
SAR(1 g) = 0.353 mW/g; SAR(10 g) = 0.278 mW/g
Maximum value of SAR (measured) = 0.389 mW/g


Test Laboratory: Compliance Certification Services Inc.   August 10, 2011
GSM 850-Left Head Tilted High CH251
DUT: GSM Mobile Phone; Type: U-100-2; Serial: 862718007015336
Communication System: Generic GSM; Communication System Band: GSM 850
(824.0 - 849.0 MHz); Frequency: 848.8MHz;Communication System PAR: 9.03 dB
Medium parameters used (interpolated): f = 848.8MHz; σ = 0.899 mho/m; εr = 41.327;
ρ = 1000 kg/m3
Phantom section: Left Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY5 Configuration:
    • Probe: EX3DV4 - SN3755; ConvF(8.99, 8.99, 8.99); Calibrated: 1/20/2011
    • Sensor-Surface: 2.5mm (Mechanical Surface Detection)
    • Electronics: DAE4 Sn1245; Calibrated: 1/11/2011
    • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609
    • Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2
        (2595)
GSM850/Left Head Tilted High CH251/Area Scan (6x9x1):
Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.309 mW/g
GSM850/Left Head Tilted High CH251/Zoom Scan (7x7x9)/Cube 0:
Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 13.494 V/m; Power Drift = 0.06 dB
Peak SAR (extrapolated) = 0.355 W/kg
SAR(1 g) = 0.292 mW/g; SAR(10 g) = 0.230 mW/g
Maximum value of SAR (measured) = 0.319 mW/g


Test Laboratory: Compliance Certification Services Inc.   August 10, 2011
PCS-1900-Right Head Cheek Low CH512
DUT: GSM Mobile Phone; Type: U-100-2; Serial: 862718007015336
Communication System: Generic GSM; Communication System Band: PCS 1900
(1850.0 - 1910.0 MHz); Frequency: 1850.2 MHz;Communication System PAR: 9.03
dB
Medium parameters used: f = 1850.2 MHz; σ = 1.42 mho/m; εr = 39.87; ρ = 1000 kg/m3
Phantom section: Right Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY5 Configuration:
   • Probe: EX3DV4 - SN3755; ConvF(7.84, 7.84, 7.84); Calibrated: 1/20/2011
   • Sensor-Surface: 2.5mm (Mechanical Surface Detection)
   • Electronics: DAE4 Sn1245; Calibrated: 1/11/2011
   • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609
   • Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2
       (2595)
PCS1900/Right Head Cheek Low CH512/Area Scan (6x9x1):
Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.504 mW/g
PCS1900/Right Head Cheek Low CH512/Zoom Scan (7x7x9)/Cube 0:
Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 9.671 V/m; Power Drift = -0.05 dB
Peak SAR (extrapolated) = 0.615 W/kg
SAR(1 g) = 0.422 mW/g; SAR(10 g) = 0.252 mW/g
Maximum value of SAR (measured) = 0.509 mW/g


Test Laboratory: Compliance Certification Services Inc.   August 10, 2011
PCS-1900-Right Head Cheek Middle CH661
DUT: GSM Mobile Phone; Type: U-100-2; Serial: 862718007015336
Communication System: Generic GSM; Communication System Band: PCS 1900
(1850.0 - 1910.0 MHz); Frequency: 1880 MHz;Communication System PAR: 9.03 dB
Medium parameters used: f = 1880 MHz; σ = 1.45 mho/m; εr = 39.74; ρ = 1000 kg/m3
Phantom section: Right Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY5 Configuration:
   • Probe: EX3DV4 - SN3755; ConvF(7.84, 7.84, 7.84); Calibrated: 1/20/2011
   • Sensor-Surface: 2.5mm (Mechanical Surface Detection)
   • Electronics: DAE4 Sn1245; Calibrated: 1/11/2011
   • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609
   • Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2
       (2595)
PCS1900/Right Head Cheek Middle CH661/Area Scan (6x9x1):
Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.337 mW/g
PCS1900/Right Head Cheek Middle CH661/Zoom Scan (7x7x9)/Cube 0:
Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 8.973 V/m; Power Drift = -0.08 dB
Peak SAR (extrapolated) = 0.476 W/kg
SAR(1 g) = 0.289 mW/g; SAR(10 g) = 0.175 mW/g
Maximum value of SAR (measured) = 0.355 mW/g


Test Laboratory: Compliance Certification Services Inc.   August 10, 2011
PCS-1900-Right Head Cheek High CH810
DUT: GSM Mobile Phone; Type: U-100-2; Serial: 862718007015336
Communication System: Generic GSM; Communication System Band: PCS 1900
(1850.0 - 1910.0 MHz); Frequency: 1910.0 MHz;Communication System PAR: 9.03
dB
Medium parameters used: f = 1910.0 MHz; σ = 1.47 mho/m; εr = 39.6; ρ = 1000 kg/m3
Phantom section: Right Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY5 Configuration:
   • Probe: EX3DV4 - SN3755; ConvF(7.84, 7.84, 7.84); Calibrated: 1/20/2011
   • Sensor-Surface: 2.5mm (Mechanical Surface Detection)
   • Electronics: DAE4 Sn1245; Calibrated: 1/11/2011
   • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609
   • Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2
       (2595)
PCS1900/Right Head Cheek High CH810/Area Scan (6x9x1):
Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.432 mW/g
PCS1900/Right Head Cheek High CH810/Zoom Scan (7x7x9)/Cube 0:
Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 10.074 V/m; Power Drift = -0.01 dB
Peak SAR (extrapolated) = 0.545 W/kg
SAR(1 g) = 0.352 mW/g; SAR(10 g) = 0.206 mW/g
Maximum value of SAR (measured) = 0.445 mW/g


Test Laboratory: Compliance Certification Services Inc.   August 10, 2011
PCS-1900-Right Head Tilted Low CH512
DUT: GSM Mobile Phone; Type: U-100-2; Serial: 862718007015336
Communication System: Generic GSM; Communication System Band: PCS 1900
(1850.0 - 1910.0 MHz); Frequency: 1850.2 MHz;Communication System PAR: 9.03
dB
Medium parameters used: f = 1850.2 MHz; σ = 1.42 mho/m; εr = 39.87; ρ = 1000 kg/m3
Phantom section: Right Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY5 Configuration:
   • Probe: EX3DV4 - SN3755; ConvF(7.84, 7.84, 7.84); Calibrated: 1/20/2011
   • Sensor-Surface: 2.5mm (Mechanical Surface Detection)
   • Electronics: DAE4 Sn1245; Calibrated: 1/11/2011
   • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609
   • Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2
       (2595)
PCS1900/Right Head Tilted Low CH512/Area Scan (6x9x1):
Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.106 mW/g
PCS1900/Right Head Tilted Low CH512/Zoom Scan (7x7x9)/Cube 0:
Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 7.963 V/m; Power Drift = 0.15 dB
Peak SAR (extrapolated) = 0.146 W/kg
SAR(1 g) = 0.091 mW/g; SAR(10 g) = 0.054 mW/g
Maximum value of SAR (measured) = 0.109 mW/g


Test Laboratory: Compliance Certification Services Inc.   August 10, 2011
PCS-1900-Right Head Tilted Middle CH661
DUT: GSM Mobile Phone; Type: U-100-2; Serial: 862718007015336
Communication System: Generic GSM; Communication System Band: PCS 1900
(1850.0 - 1910.0 MHz); Frequency: 1880 MHz;Communication System PAR: 9.03 dB
Medium parameters used: f = 1880 MHz; σ = 1.45 mho/m; εr = 39.74; ρ = 1000 kg/m3
Phantom section: Right Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY5 Configuration:
   • Probe: EX3DV4 - SN3755; ConvF(7.84, 7.84, 7.84); Calibrated: 1/20/2011
   • Sensor-Surface: 2.5mm (Mechanical Surface Detection)
   • Electronics: DAE4 Sn1245; Calibrated: 1/11/2011
   • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609
   • Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2
       (2595)
PCS1900/Right Head Tilted Middle CH661/Area Scan (6x9x1):
Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.123 mW/g
PCS1900/Right Head Tilted Middle CH661/Zoom Scan (7x7x9)/Cube 0:
Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 8.606 V/m; Power Drift = 0.20 dB
Peak SAR (extrapolated) = 0.163 W/kg
SAR(1 g) = 0.108 mW/g; SAR(10 g) = 0.064 mW/g
Maximum value of SAR (measured) = 0.133 mW/g


Test Laboratory: Compliance Certification Services Inc.   August 10, 2011
PCS-1900-Right Head Tilted High CH810
DUT: GSM Mobile Phone; Type: U-100-2; Serial: 862718007015336
Communication System: Generic GSM; Communication System Band: PCS 1900
(1850.0 - 1910.0 MHz); Frequency: 1910.0 MHz;Communication System PAR: 9.03
dB
Medium parameters used: f = 1910.0 MHz; σ = 1.47 mho/m; εr = 39.6; ρ = 1000 kg/m3
Phantom section: Right Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY5 Configuration:
   • Probe: EX3DV4 - SN3755; ConvF(7.84, 7.84, 7.84); Calibrated: 1/20/2011
   • Sensor-Surface: 2.5mm (Mechanical Surface Detection)
   • Electronics: DAE4 Sn1245; Calibrated: 1/11/2011
   • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609
   • Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2
       (2595)
PCS1900/Right Head Tilted High CH810/Area Scan (6x9x1):
Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.156 mW/g
PCS1900/Right Head Tilted High CH810/Zoom Scan (7x7x7)/Cube 0:
Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 9.881 V/m; Power Drift = 0.0045 dB
Peak SAR (extrapolated) = 0.212 W/kg
SAR(1 g) = 0.133 mW/g; SAR(10 g) = 0.078 mW/g
Maximum value of SAR (measured) = 0.140 mW/g


Test Laboratory: Compliance Certification Services Inc.   August 10, 2011
PCS 1900-Left Head Cheek Low CH512
DUT: GSM Mobile Phone; Type: U-100-2; Serial: 862718007015336
Communication System: Generic GSM; Communication System Band: PCS 1900
(1850.0 - 1910.0 MHz); Frequency: 1850.2 MHz;Communication System PAR: 9.03
dB
Medium parameters used: f = 1850.2 MHz; σ = 1.42 mho/m; εr = 39.87; ρ = 1000 kg/m3
Phantom section: Left Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY5 Configuration:
   • Probe: EX3DV4 - SN3755; ConvF(7.84, 7.84, 7.84); Calibrated: 1/20/2011
   • Sensor-Surface: 2.5mm (Mechanical Surface Detection)
   • Electronics: DAE4 Sn1245; Calibrated: 1/11/2011
   • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609
   • Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2
       (2595)
PCS1900/Left Head Cheek Low CH512/Area Scan (6x9x1):
Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.461 mW/g
PCS1900/Left Head Cheek Low CH512/Zoom Scan (7x7x9)/Cube 0:
Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 8.886 V/m; Power Drift = 0.11 dB
Peak SAR (extrapolated) = 0.669 W/kg
SAR(1 g) = 0.412 mW/g; SAR(10 g) = 0.251 mW/g
Maximum value of SAR (measured) = 0.528 mW/g


Test Laboratory: Compliance Certification Services Inc.   August 10, 2011
PCS 1900-Left Head Cheek Middle CH661
DUT: GSM Mobile Phone; Type: U-100-2; Serial: 862718007015336
Communication System: Generic GSM; Communication System Band: PCS 1900
(1850.0 - 1910.0 MHz); Frequency: 1880 MHz;Communication System PAR: 9.03 dB
Medium parameters used: f = 1880 MHz; σ = 1.45 mho/m; εr = 39.74; ρ = 1000 kg/m3
Phantom section: Left Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY5 Configuration:
   • Probe: EX3DV4 - SN3755; ConvF(7.84, 7.84, 7.84); Calibrated: 1/20/2011
   • Sensor-Surface: 2.5mm (Mechanical Surface Detection)
   • Electronics: DAE4 Sn1245; Calibrated: 1/11/2011
   • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609
   • Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2
       (2595)
PCS1900/Left Head Cheek Middle CH661/Area Scan (6x9x1):
Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.392 mW/g
PCS1900/Left Head Cheek Middle CH661/Zoom Scan (8x8x9)/Cube 0:
Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 8.968 V/m; Power Drift = -0.07 dB
Peak SAR (extrapolated) = 0.585 W/kg
SAR(1 g) = 0.352 mW/g; SAR(10 g) = 0.216 mW/g
Maximum value of SAR (measured) = 0.437 mW/g


Test Laboratory: Compliance Certification Services Inc.   August 10, 2011
PCS 1900-Left Head Cheek High CH810
DUT: GSM Mobile Phone; Type: U-100-2; Serial: 862718007015336
Communication System: Generic GSM; Communication System Band: PCS 1900
(1850.0 - 1910.0 MHz); Frequency: 1910.0 MHz;Communication System PAR: 9.03
dB
Medium parameters used: f = 1910.0 MHz; σ = 1.47 mho/m; εr = 39.6; ρ = 1000 kg/m3
Phantom section: Left Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY5 Configuration:
   • Probe: EX3DV4 - SN3755; ConvF(7.84, 7.84, 7.84); Calibrated: 1/20/2011
   • Sensor-Surface: 2.5mm (Mechanical Surface Detection)
   • Electronics: DAE4 Sn1245; Calibrated: 1/11/2011
   • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609
   • Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2
       (2595)
PCS1900/Left Head Cheek High CH810/Area Scan (6x9x1):
Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.402 mW/g
PCS1900/Left Head Cheek High CH810/Zoom Scan (7x7x9)/Cube 0:
Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 10.381 V/m; Power Drift = -0.05 dB
Peak SAR (extrapolated) = 0.614 W/kg
SAR(1 g) = 0.366 mW/g; SAR(10 g) = 0.227 mW/g
Maximum value of SAR (measured) = 0.461 mW/g


Test Laboratory: Compliance Certification Services Inc.   August 10, 2011
PCS 1900-Left Head Tilted Low CH512
DUT: GSM Mobile Phone; Type: U-100-2; Serial: 862718007015336
Communication System: Generic GSM; Communication System Band: PCS 1900
(1850.0 - 1910.0 MHz); Frequency: 1850.2 MHz; Communication System PAR: 9.03
dB
Medium parameters used: f = 1850.2 MHz; σ = 1.42 mho/m; εr = 39.87; ρ = 1000 kg/m3
Phantom section: Left Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY5 Configuration:
   • Probe: EX3DV4 - SN3755; ConvF(7.84, 7.84, 7.84); Calibrated: 1/20/2011
   • Sensor-Surface: 2.5mm (Mechanical Surface Detection)
   • Electronics: DAE4 Sn1245; Calibrated: 1/11/2011
   • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609
   • Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2
       (2595)
PCS1900/Left Head Tilted Low CH512/Area Scan (6x9x1):
Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.102 mW/g
PCS1900/Left Head Tilted Low CH512/Zoom Scan (7x7x9)/Cube 0:
Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 7.912 V/m; Power Drift = -0.03dB
Peak SAR (extrapolated) = 0.136 W/kg
SAR(1 g) = 0.091 mW/g; SAR(10 g) = 0.055 mW/g
Maximum value of SAR (measured) = 0.111 mW/g


Test Laboratory: Compliance Certification Services Inc.   August 10, 2011
PCS 1900-Left Head Tilted Middle CH661
DUT: GSM Mobile Phone; Type: U-100-2; Serial: 862718007015336
Communication System: Generic GSM; Communication System Band: PCS 1900
(1850.0 - 1910.0 MHz); Frequency: 1880 MHz;Communication System PAR: 9.03 dB
Medium parameters used: f = 1880 MHz; σ = 1.45 mho/m; εr = 39.74; ρ = 1000 kg/m3
Phantom section: Left Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY5 Configuration:
   • Probe: EX3DV4 - SN3755; ConvF(7.84, 7.84, 7.84); Calibrated: 1/20/2011
   • Sensor-Surface: 2.5mm (Mechanical Surface Detection)
   • Electronics: DAE4 Sn1245; Calibrated: 1/11/2011
   • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609
   • Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2
       (2595)
PCS1900/Left Head Tilted Middle CH661/Area Scan (6x9x1):
Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.123 mW/g
PCS1900/Left Head Tilted Middle CH661/Zoom Scan (7x7x9)/Cube 0:
Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 8.296 V/m; Power Drift = -0.08 dB
Peak SAR (extrapolated) = 0.162 W/kg
SAR(1 g) = 0.105 mW/g; SAR(10 g) = 0.064 mW/g
Maximum value of SAR (measured) = 0.129 mW/g


   Test Laboratory: Compliance Certification Services Inc.   August 10, 2011
PCS 1900-Left Head Tilted High CH810
DUT: GSM Mobile Phone; Type: U-100-2; Serial: 862718007015336
Communication System: Generic GSM; Communication System Band: PCS 1900
(1850.0 - 1910.0 MHz); Frequency: 1910.0 MHz;Communication System PAR: 9.03
dB
Medium parameters used: f = 1910.0 MHz; σ = 1.47 mho/m; εr = 39.6; ρ = 1000 kg/m3
Phantom section: Left Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY5 Configuration:
   • Probe: EX3DV4 - SN3755; ConvF(7.84, 7.84, 7.84); Calibrated: 1/20/2011
   • Sensor-Surface: 2.5mm (Mechanical Surface Detection)
   • Electronics: DAE4 Sn1245; Calibrated: 1/11/2011
   • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609
   • Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2
       (2595)
PCS1900/Left Head Tilted High CH810/Area Scan (6x9x1):
Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.149 mW/g
PCS1900/Left Head Tilted High CH810/Zoom Scan (7x7x9)/Cube 0:
Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 9.008 V/m; Power Drift = -0.04 dB
Peak SAR (extrapolated) = 0.200 W/kg
SAR(1 g) = 0.130 mW/g; SAR(10 g) = 0.077 mW/g
Maximum value of SAR (measured) = 0.160 mW/g


Test Laboratory: Compliance Certification Services Inc.   August 10, 2011
GSM 850-Body Up High CH251
DUT: GSM Mobile Phone; Type: U-100-2; Serial: 862718007015336
Communication System: Generic GSM; Communication System Band: GSM 850
(824.0 - 849.0 MHz); Frequency: 848.8MHz;Communication System PAR: 9.03 dB
Medium parameters used (interpolated): f = 848.8MHz; σ = 0.95 mho/m; εr = 55.15; ρ =
1000 kg/m3
Phantom section: Right Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY5 Configuration:
   • Probe: EX3DV4 - SN3755; ConvF(8.99, 8.99, 8.99); Calibrated: 1/20/2011
   • Sensor-Surface: 2.5mm (Mechanical Surface Detection)
   • Electronics: DAE4 Sn1245; Calibrated: 1/11/2011
   • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609
Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2 (2595)
GSM850/GSM850 Body Up High CH251/Area Scan (6x9x1):
Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.192 mW/g
GSM850/GSM850 Body Up High CH251/Zoom Scan (7x7x9)/Cube 0:
Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 6.244 V/m; Power Drift = 0.02dB
Peak SAR (extrapolated) = 0.278 W/kg
SAR(1 g) = 0.168 mW/g; SAR(10 g) = 0.097 mW/g
Maximum value of SAR (measured) = 0.211 mW/g


Test Laboratory: Compliance Certification Services Inc.   August 10, 2011
GSM 850-Body Down High CH251
DUT: GSM Mobile Phone; Type: U-100-2; Serial: 862718007015336
Communication System: Generic GSM; Communication System Band: GSM 850
(824.0 - 849.0 MHz); Frequency: 848.8MHz;Communication System PAR: 9.03 dB
Medium parameters used (interpolated): f = 848.8MHz; σ = 0.96 mho/m; εr = 55.12; ρ =
1000 kg/m3
Phantom section: Right Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY5 Configuration:
   • Probe: EX3DV4 - SN3755; ConvF(8.99, 8.99, 8.99); Calibrated: 1/20/2011
   • Sensor-Surface: 2.5mm (Mechanical Surface Detection)
   • Electronics: DAE4 Sn1245; Calibrated: 1/11/2011
   • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609
Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2 (2595)
GSM850/GSM850 Body Down High CH251/Area Scan (6x9x1):
Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.365 mW/g
GSM850/GSM850 Body Down High CH251/Zoom Scan (7x7x9)/Cube 0:
Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 9.281 V/m; Power Drift = 0.02 dB
Peak SAR (extrapolated) = 0.482 W/kg
SAR(1 g) = 0.290 mW/g; SAR(10 g) = 0.167 mW/g
Maximum value of SAR (measured) = 0.369 mW/g


Test Laboratory: Compliance Certification Services Inc.   August 10, 2011
GPRS 850-Body Up High CH251
DUT: GSM Mobile Phone; Type: U-100-2; Serial: 862718007015336
Communication System: Generic GSM; Communication System Band: GSM 850
(824.0 - 849.0 MHz); Frequency: 848.8MHz;Communication System PAR: 3.01 dB
Medium parameters used (interpolated): f = 848.8MHz; σ = 0.95 mho/m; εr = 55.15; ρ =
1000 kg/m3
Phantom section: Right Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY5 Configuration:
   • Probe: EX3DV4 - SN3755; ConvF(8.99, 8.99, 8.99); Calibrated: 1/20/2011
   • Sensor-Surface: 2.5mm (Mechanical Surface Detection)
   • Electronics: DAE4 Sn1245; Calibrated: 1/11/2011
   • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609
Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2 (2595)
GPRS850/GPRS850 Body Up High CH251/Area Scan (6x9x1):
Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.178 mW/g
GPRS850/GPRS850 Body Up High CH251/Zoom Scan (7x7x9)/Cube 0:
Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 3.762 V/m; Power Drift = 0.09 dB
Peak SAR (extrapolated) = 0.243 W/kg
SAR(1 g) = 0.148 mW/g; SAR(10 g) = 0.086 mW/g
Maximum value of SAR (measured) = 0.187 mW/g


Test Laboratory: Compliance Certification Services Inc.   August 10, 2011
GPRS850-Body Down High CH251
DUT: GSM Mobile Phone; Type: U-100-2; Serial: 862718007015336
Communication System: Generic GSM; Communication System Band: GSM 850
(824.0 - 849.0 MHz); Frequency: 848.8MHz;Communication System PAR: 3.01 dB
Medium parameters used (interpolated): f = 848.8MHz; σ = 0.95 mho/m; εr = 55.12; ρ =
1000 kg/m3
Phantom section: Right Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY5 Configuration:
   • Probe: EX3DV4 - SN3755; ConvF(8.99, 8.99, 8.99); Calibrated: 1/20/2011
   • Sensor-Surface: 2.5mm (Mechanical Surface Detection)
   • Electronics: DAE4 Sn1245; Calibrated: 1/11/2011
   • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609
Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2 (2595)
GPRS850/GPRS850 Body Down High CH251/Area Scan (6x9x1):
Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.379 mW/g
GPRS850/GPRS850 Body Down High CH251/Zoom Scan (7x7x9)/Cube
0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 9.063 V/m; Power Drift = 0.07 dB
Peak SAR (extrapolated) = 0.492 W/kg
SAR(1 g) = 0.301 mW/g; SAR(10 g) = 0.173 mW/g
Maximum value of SAR (measured) = 0.382 mW/g


Test Laboratory: Compliance Certification Services Inc.   August 10, 2011
PCS1900-Body Up Low CH512
DUT: GSM Mobile Phone; Type: U-100-2; Serial: 862718007015336
Communication System: Generic GSM; Communication System Band: PCS 1900
(1850.0 - 1910.0 MHz); Frequency: 1850.2 MHz;Communication System PAR: 9.03
dB
Medium parameters used: f = 1850.2 MHz; σ = 1.53 mho/m; εr = 51.24; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY5 Configuration:
   • Probe: EX3DV4 - SN3755; ConvF(7.23, 7.23, 7.23); Calibrated: 1/20/2011
   • Sensor-Surface: 2.5mm (Mechanical Surface Detection)
   • Electronics: DAE4 Sn1245; Calibrated: 1/11/2011
   • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609
   • Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2
       (2595)
GSM1900/GSM1900 Body Up Low CH512/Area Scan (6x9x1):
Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.196 mW/g
GSM1900/GSM1900 Body Up Low CH512/Zoom Scan (7x7x9)/Cube 0:
Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 5.414 V/m; Power Drift = 0.11 dB
Peak SAR (extrapolated) = 0.254 W/kg
SAR(1 g) = 0.154 mW/g; SAR(10 g) = 0.087 mW/g
Maximum value of SAR (measured) = 0.194 mW/g


Test Laboratory: Compliance Certification Services Inc.   August 10, 2011
PCS1900-Body Down Low CH512
DUT: GSM Mobile Phone; Type: U-100-2; Serial: 862718007015336
Communication System: Generic GSM; Communication System Band: PCS 1900
(1850.0 - 1910.0 MHz); Frequency: 1850.2 MHz;Communication System PAR: 9.03
dB
Medium parameters used: f = 1850.2 MHz; σ = 1.53 mho/m; εr = 51.24; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY5 Configuration:
   • Probe: EX3DV4 - SN3755; ConvF(7.23, 7.23, 7.23); Calibrated: 1/20/2011
   • Sensor-Surface: 2.5mm (Mechanical Surface Detection)
   • Electronics: DAE4 Sn1245; Calibrated: 1/11/2011
   • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609
   • Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2
       (2595)
GSM1900/GSM1900 Body Down Low CH512/Area Scan (6x9x1):
Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.465 mW/g
GSM1900/GSM1900 Body Down Low CH512/Zoom Scan (7x7x9)/Cube
0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 10.417 V/m; Power Drift = -0.07 dB
Peak SAR (extrapolated) = 0.586 W/kg
SAR(1 g) = 0.361 mW/g; SAR(10 g) = 0.207 mW/g
Maximum value of SAR (measured) = 0.452 mW/g


 Test Laboratory: Compliance Certification Services Inc.   August 10, 2011
GPRS1900-Body Up Low CH512
DUT: GSM Mobile Phone; Type: U-100-2; Serial: 862718007015336
Communication System: Generic GSM; Communication System Band: PCS 1900
(1850.0 - 1910.0 MHz); Frequency: 1850.2 MHz;Communication System PAR:3.01
dB
Medium parameters used: f = 1850.2 MHz; σ = 1.53 mho/m; εr = 51.24; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY5 Configuration:
   • Probe: EX3DV4 - SN3755; ConvF(7.23, 7.23, 7.23); Calibrated: 1/20/2011
   • Sensor-Surface: 2.5mm (Mechanical Surface Detection)
   • Electronics: DAE4 Sn1245; Calibrated: 1/11/2011
   • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609
   • Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2
       (2595)
GPRS1900/GPRS 1900 Body Up Low CH512/Area Scan (6x9x1):
Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.215 mW/g
GPRS1900/GPRS 1900 Body Up Low CH512/Zoom Scan (7x7x9)/Cube
0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 7.514 V/m; Power Drift = 0.01 dB
Peak SAR (extrapolated) = 0.256W/kg
SAR(1 g) = 0.174 mW/g; SAR(10 g) = 0.092 mW/g
Maximum value of SAR (measured) = 0.295 mW/g


Test Laboratory: Compliance Certification Services Inc.   August 10, 2011
GPRS1900-Body Down Low CH512
DUT: GSM Mobile Phone; Type: U-100-2; Serial: 862718007015336
Communication System: Generic GSM; Communication System Band: PCS 1900
(1850.0 - 1910.0 MHz); Frequency: 1850.2 MHz;Communication System PAR: 3.01
dB
Medium parameters used: f = 1850.2 MHz; σ = 1.53 mho/m; εr = 51.24; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY5 Configuration:
   • Probe: EX3DV4 - SN3755; ConvF(7.23, 7.23, 7.23); Calibrated: 1/20/2011
   • Sensor-Surface: 2.5mm (Mechanical Surface Detection)
   • Electronics: DAE4 Sn1245; Calibrated: 1/11/2011
   • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609
   • Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2
       (2595)
GPRS1900/GPRS 1900 Body Down Low CH512/Area Scan (6x9x1):
Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.435 mW/g
GPRS1900/GPRS 1900 Body Down Low CH512/Zoom Scan(7x7x9)/
Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 8.734 V/m; Power Drift = -0.112 dB
Peak SAR (extrapolated) = 0.534 W/kg
SAR(1 g) = 0.385 mW/g; SAR(10 g) = 0.212 mW/g
Maximum value of SAR (measured) = 0.495mW/g



Document Created: 2011-08-11 16:01:21
Document Modified: 2011-08-11 16:01:21

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC