I19Z61829-SEM01_SAR_Rev0_7

FCC ID: ZNFX540HM

RF Exposure Info

Download: PDF
FCCID_4474994

(3) CAICT DASY5 Validation Report for Head TSL Date: 16.07.2019 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 2600 MHz; Type: D2600V2; Serial: D2600V2 — SN:1012 Communication System: UID 0 — CW; Frequency: 2600 MHz Medium parameters used: f = 2600 MHz; 0 = 2.02 $/m; & = 37.1; p = 1000 kg/m* Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19—2011) DASY52 Configuration: e Probe: EX3DV4 — SN7349; ConvF(7.69, 7.69, 7.69) @ 2600 MHz; Calibrated: 29.05.2019 e Sensor—Surface: 1.4mm (Mechanical Surface Detection) e Electronics: DAE4 Sn601; Calibrated: 30.04.2019 e Phantom: Flat Phantom 5.0 (front); Type: QD 000 P50 AA; Serial: 1001 e DASY52 52.10.2(1504); SEMCAD X 14.6.12(7470) Dipole Calibration for Head Tissue/Pin=250 mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 118.6 V/m; Power Drift = 0.00 dB Peak SAR (extrapolated) = 28.8 W/kg SAR(I g) = 14.3 W/kg; SAR(10 g) = 6.38 W/kg Maximum value of SAR (measured) = 24.0 W/kg dB I] ~4.80 —9.60 ~14.40 —19.20 —24.00 0 dB = 24.0 W/kg = 13.80 dBW/kg Certificate No: D2600V2—1012_Jul19 Page 5 of 8 =o n uen > v «

) U CAIET (I Impedance Measurement Plot for Head TSL File View Channel Sweep Calibration Trace Scale Marker System Window Help 2.600000 GHz 47.540 0 96620 pF —6.3355 0 2.600000 GHz 69.529 mU +107.50 * Ch1Aug= 20 Ch1: Start 2.40000 GHz —— Stop 2.90000 GHz 0.00 5.00 0.00 00 00 00 00 00 00 Ch 1 & Chi: Start 2.40000 GHz —— Stop 2.90000 GHz Status CH 1: EH | C" 1—Port Avg=20 Delay } LCL Certificate No: D2600V2—1012_Jul19 Page 6 of 8

(3 TTL CAICT DASY5 Validation Report for Body TSL Date: 17.07.2019 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 2600 MHz; Type: D2600V2; Serial: D2600V2 — SN:1012 Communication System: UID 0 — CW; Frequency: 2600 MHz Medium parameters used: f = 2600 MHz; 0 = 2.2 S/m; & = 50.4; p = 1000 kg/m?* Phantom section: Flat Section Measurement Standard: DASYS (IEEE/IEC/ANSI C€63.19—2011) DASY52 Configuration: Probe: EX3DV4 — SN7349; ConvF(7.8, 7.8, 7.8) @ 2600 MHz; Calibrated: 29.05.2019 Sensor—Surface: 1.4mm (Mechanical Surface Detection) Electronics: DAE4 Sn601; Calibrated: 30.04.2019 Phantom: Flat Phantom 5.0 (back); Type: QD 000 P50 AA; Serial: 1002 DASY52 52.10.2(1504); SEMCAD X 14.6.12(7470) Dipole Calibration for Body Tissue/Pin=250 mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 110.1 V/m; Power Drift = —0.06 dB Peak SAR (extrapolated) = 28.3 W/kg SAR(I g) = 14 W/kg; SAR(10 g) = 6.26 W/kg Maximum value of SAR (measured) = 23.3 W/kg dB —5.20 —10.40 ~15.60 —20.80 —26.00 0 dB = 23.3 W/kg = 13.67 dBW/kg Certificate No: D2600V2—1012_Jul19 Page 7 of 8

TTL CAIECET Impedance Measurement Plot for Body TSL File View Channel Swesp Calibration Trace Scale Marker System Window Help 2.600000 GHz 43.800 O 13.052 pF —4.6898 0 § 2600000 GHz 82.771 mU ~140.03 ° Ch1Aug= 20 Chi: Start 2.40000 GHz —— Stop 2.20000 GHz .00 00 100 00 00 = Chi: Start 2.40000 GHz ——— 2.20000 GHz Status "CHi‘ _ c[CiFPor Avg=20 Delay fhod LCL Certificate No: D2600V2—1012_Jul19 Page 8 of 8

€CAICT > 3 w49 0j Callbratlon Laboratory of S\\\\\/\\/I//’I’; S Schweizerischer Kalibrierdienst Schmid & Partner ilafi&é c Service suisse d‘étalonnage Engineering AG P _2 Mf Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland * /A ® S Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreementfor the recognition of calibration certificates Client CTTL (Auden) Certificate No: D5GHzV2—1262_Jan19 CALIBRATION CERTIFICATE Object D5GHzV2 — SN:1262 Calibration procedure(s) QA CAL—22.v4 Calibration Procedure for SAR Validation Sources between 3—6 GHz Calibration date: January 31, 2019 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Power meter NRP SN: 104778 04—Apr—18 (No. 217—02672/02673) Apr—19 Power sensor NRP—Z91 SN: 103244 04—Apr—18 (No. 217—02672) Apr—19 Power sensor NRP—Z91 SN: 103245 04—Apr—18 (No. 217—02673) Apr—19 Reference 20 dB Attenuator SN: 5058 (20k) 04—Apr—18 (No. 217—02682) Apr—19 Type—N mismatch combination SN: 5047.2 / 06327 04—Apr—18 (No. 217—02683) Apr—19 Reference Probe EX3DV4 SN: 3503 31—Dec—18 (No. EX3—3503_Dec18) Dec—19 DAE4 SN: 601 04—Oct—18 (No. DAE4—601_Oct18) Oct—19 Secondary Standards ID # Check Date (in house) Scheduled Check Power meter EPM—442A SN: GB37480704 07—Oct—15 (in house check Oct—18) In house check: Oct—20 Power sensor HP 8481A SN: US372902783 07—Oct—15 (in house check Oct—18) In house check: Oct—20 Power sensor HP 8481A SN: MY41092317 07—Oct—15 (in house check Oct—18) In house check: Oct—20 RF generator R&S SMT—06 SN: 100972 15—Jun—15 (in house check Oct—18) In house check: Oct—20 Network Analyzer Agilent E835BA SN: US41080477 31—Mar—14 (in house check Oct—18) In house check: Oct—19 Name Function Signature Mlbel~ Calibrated by: Michael Weber Laboratory Technician Approved by: KatJa Pokovic Technical Manager P2e Issued: February 5, 2019 This calibration certificate shall not be reproduced except in full without written approvalof the laboratory. Certificate No: D5GHzV2—1262_Jan19 Page 1 of 13 Nn ty g e c c rges

TTL CAICT (Calibration . Laboratory of Schmid & Partner Engineering AG on/5 $X 5&—//’;_ ;//RE g c Schweizerischer Kalibrierdienst Service suisse d‘étalonnage Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland Rp/7-\\\\‘\\* § Swiss Calibration Service "hilals Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid ConvrF sensitivity in TSL / NORM x,y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) IEC 62209—1, "Measurement procedure for the assessment of Specific Absorption Rate (SAR) from hand—held and body—mounted devices used next to the ear (frequency range of 300 MHz to 6 GHz)", July 2016 c) IEC 62209—2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)", March 2010 d) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Additional Documentation: e) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: e Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. e Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented paralle! to the body axis. e Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. e Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. e SAR measured: SAR measured at the stated antenna input power. e SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. + SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. Certificate No: D5GHzV2—1262_Jan19 Page 2 of 13

CAICT (@ NR Measurement Conditions DASY system configuration, as far as not g iven on page 1. DASY Version DASY5 V52.10.2 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom V5.0 Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy = 4.0 mm, dz =1.4 mm Graded Ratio = 1.4 (Z direction) 5250 MHz # 1 MHz Frequency 5600 MHz + 1 MHz 5750 MHz + 1 MHz Head TSL parameters at 5250 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 35.9 4.71 mho/m Measured Head TSL parameters (22.0 £ 0.2) °C 36.7 26 % 4.54 mho/m + 6 % Head TSL temperature change during test <0.5 °C + SAR result with Head TSL at 5250 MHz SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 8.05 W/kg SAR for nominal Head TSL parameters normalized to 1W 80.8 Wikg 19.9 % (k=2) SAR averaged over 10 cm‘ (10 g) of Head TSL condition SAR measured 100 mW input power 2.30 Wikg SAR for nominal Head TSL parameters normalized to 1W 23.1 Wikg £ 19.5 % (k=2) Certificate No: D5GHzV2—1262_Jan19 Page 3 of 13

() CAICT < Head TSL parameters at 5600 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 35.5 5.07 mho/m Measured Head TSL parameters (22.0 £ 0.2) °C 36.2 46 % 4.90 mho/m + 6 % Head TSL temperature change during test <0.5 °C SAR result with Head TSL at 5600 MHz SAR averaged over 1 cm‘ (1 g) of Head TSL Condition SAR measured 100 mW input power 8.34 W/kg SAR for nominal Head TSL parameters normalized to 1W 83.6 W / kg # 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 100 mW input power 2.37 Wikg SAR for nominal Head TSL parameters normalized to 1W 23.8 Wikg * 19.5 % (k=2) Head TSL parameters at 5750 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 35.4 5.22 mho/m Measured Head TSL parameters (22.0 £ 0.2) °C 36.0 £ 6 % 5.06 mho/m + 6 % Head TSL temperature change during test <0.5 °C ~—— SAR result with Head TSL at 5750 MHz SAR averaged over 1 cm‘ (1 g) of Head TSL Condition SAR measured 100 mW input power 8.15 W/kg SAR for nominal Head TSL parameters normalized to 1W 81.7 Wikg x 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 100 mW input power 2.30 Wikg SAR for nominal Head TSL parameters normalized to 1W 23.1 Wikg + 19.5 % (k=2) Certificate No: D5GHzV2—1262_Jan19 Page 4 of 13

mm © @77TL CAICT ~CGqpprme Body TSL parameters at 5250 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 48.9 5.36 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 47.2 x6 % 5.43 mho/m + 6 % Body TSL temperature change during test <0.5 °C ———— _ SAR result with Body TSL at 5250 MHz SAR averaged over 1 em* (1 g) of Body TSL Condition SAR measured 100 mW input power 7.58 W/kg SAR for nominal Body TSL parameters normalized to 1W 75.3 Wikg + 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 100 mW input power 2.12 W/kg SAR for nominal Body TSL parameters normalized to 1W 21.0 Wikg # 19.5 % (k=2) Body TSL parameters at 5600 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 48.5 5.77 mho/m Measured Body TSL parameters (22.0 £0.2) °C 46.6 +6 % 5.90 mho/m + 6 % Body TSL temperature change during test <0.5 °C aeen SAR result with Body TSL at 5600 MHz SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 100 mW input power 7.87 W/kg SAR for nominal Body TSL parameters normalized to 1W 78.1 Wikg # 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 100 mW input power 2.20 W/kg SAR for nominal Body TSL parameters normalized to 1W 21.8 Wikg x 19.5 % (k=2) Certificate No: DSGHzV2—1262_Jan19 Page 5 of 13 Rnvpeg n rgn ns n n e ne e n e e

) a=7"7J CAICT ze Body TSL parameters at 5750 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 48.3 5.94 mho/m Measured Body TSL parameters (22.0 £ 0.2) °C 46.3 £ 6 % 6.11 mho/m £ 6 % Body TSL temperature change during test <0.5 °C SAR result with Body TSL at 5750 MHz SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 100 mW input power 7.58 W/kg SAR for nominal Body TSL parameters normalized to 1W 75.2 Wikg x 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 100 mW input power 2.10 W/kg SAR for nominal Body TSL parameters normalized to 1W 20.8 W/kg x 19.5 % (k=2) Certificate No: D5GHzV2—1262_Jan19 Page 6 of 13 Nn vpep n nagn ns n n n eggene e n en en n en y e nc

8 CAICT Appendix (Additional assessments outside the scope of SCS 0108) Antenna Parameters with Head TSL at 5250 MHz Impedance, transformed to feed point 48.4 Q — 5.2 jQ Return Loss —25.2 dB Antenna Parameters with Head TSL at 5600 MHz Impedance, transformed to feed point 52.0 Q + 0.2 jQ Return Loss — 34.3 dB Antenna Parameters with Head TSL at 5750 MHz Impedance, transformed to feed point 53.2 Q + 2.0 jQ Return Loss —28.8 dB Antenna Parameters with Body TSL at 5250 MHz Impedance, transformed to feed point 47.9 Q — 8.5 jQ Return Loss —27.6 dB Antenna Parameters with Body TSL at 5600 MHz Impedance, transformed to feed point 53.9 Q + 2.0 jQ Return Loss —27.6 dB Antenna Parameters with Body TSL at 5750 MHz Impedance, transformed to feed point 53.6 Q + 3.7 jQ Return Loss —26.0 dB General Antenna Parameters and Design I Electrical Delay (one direction) 1.191 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. On some of the dipoles, small end caps are added to the dipole arms in orderto improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Certificate No: D5GHzV2—1262_Jan19 Page 7 of 13 nrw mm t en en n n n n n e m n mm n n n m y n n n o

€CAICT DASY5 Validation Report for Head TSL Date: 30.01.2019 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole DSGHzV2; Type: D5SGHzV2; Serial: DSGHzV2 — SN: 1262 Communication System: UID 0 — CW; Frequency: 5250 MHz, Frequency: 5600 MHz, Frequency: 5750 MHz Medium parameters used: f = 5250 MHz; 0 = 4.54 S/m; s = 36.7; p = 1000 kg/m3, Medium parameters used: £ = 5600 MHz; 0 = 4.9 S/m; & = 36.2; p = 1000 kg/m‘, Medium parameters used: £ = 5750 MHz; 0 = 5.06 S/m; &; = 36; p = 1000 kg/m* Phantom section: Flat Section Measurement Standard: DASYS (IEEE/IEC/ANSI C63.19—2011) DASYS52 Configuration: + Probe: EX3DV4 — SN3503; ConvF(5.45, 5.45, 5.45) @ 5250 MHz, ConvF(5, 5, 5) @ 5600 MHz, ConvF(4.98, 4.98, 4.98) @ 5750 MHz; Calibrated: 31.12.2018 * Sensor—Surface: 1.4mm (Mechanical Surface Detection) * Electronics: DAE4 Sn601; Calibrated: 04.10.2018 & Phantom: Flat Phantom 5.0 (front); Type: QD 000 P50 AA; Serial: 1001 «_ DASY532 52.10.2(1495); SEMCAD X 14.6.12(7450) Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5250 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 77.10 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 28.3 W/kg SAR(1 g) = 8.05 W/kg; SAR(10 g) = 2.3 W/kg Maximum value of SAR (measured) = 18.3 W/kg Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5600 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 76.81 V/m; Power Drift = 0.07 dB Peak SAR (extrapolated) = 31.7 W/kg SAR(I g) = 8.34 W/kg; SAR(10 g) = 2.37 W/kg Maximum value of SAR (measured) = 19.5 W/kg Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5750 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 74.84 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 32.9 W/kg SAR(1 g) = 8.15 W/kg; SAR(10 g) = 2.3 W/kg Maximum value of SAR (measured) = 19.6 W/kg Certificate No: D5GHzV2—1262_Jan19 Page 8 of 13 nom vmu n en n en n n n n e n n n n n n ng n n n o

CAICT —5.00 —10.00 —15.00 —20.00 —25.00 0 dB = 19.6 W/kg = 12.92 dBW/kg Certificate No: D5GHzV2—1262_Jan19 Page 9 of 13 Rnepe n ce esn n n n en >

® CAICT Impedance Measurement Plot for Head TSL File View Channel Sweep Calibration Trace Scale Marker System Window Help 5.250000 GHz 48.412 0 5.9862 pF $.1502 2 5.600000 GHz 51.961 0 4.7926 pH 168.63 m0 5.750000 GHz 53.165 56.559 pH 2.0434 0 5.500000 GHz 27.310mU ~158.16 * Ch1Avg= 20 Ch1: Start 5.00000 GHa ——— Stop $.00000 GHz GHz —28.751 4B 00 1 = Ch1: Start 5.00000 GHa —— Stop £.00000 GHz Status CH 1: 811 | C" 1—Port Avg=20 Delay LCL Certificate No: D5GHzV2—1262_Jan19 Page 10 of 13 Nnepeg rrggn in n n rnges

No.I19Z61829-SEM01 ©Copyright. All rights reserved by CTTL. Page 233 of 246

€CAICT —6.00 —12.00 —18.00 —24.00 —30.00 0 dB = 18.4 W/kg = 12.65 dBW/kg Certificate No: D5GHzV2—1262_Jan19 Page 12 of 13 Nn n peg n e c n ngec e >

No.I19Z61829-SEM01 ©Copyright. All rights reserved by CTTL. Page 235 of 246


Document Created: 2019-10-10 17:15:14
Document Modified: 2019-10-10 17:15:14
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC