I19Z61829-SEM01_SAR_Rev0_5

FCC ID: ZNFX540HM

RF Exposure Info

Download: PDF
FCCID_4474992

@77 Con:A [aks non snn n se sn k ns az w enb w DASY5 Validation Report for Head TSL Date: 15.07.2019 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 835 MHz; Type: D835V2; Serial: D835V2 — SN:4d069 Communication System: UID 0 — CW; Frequency: 835 MHz Medium parameters used: £ = 835 MHz; 0 = 0.91 S/m; & = 42; p = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19—2011) DASY52 Configuration: e Probe: EX3DV4 — SN7349; ConvF(9.89, 9.89, 9.89) @ 835 MHz; Calibrated: 29.05.2019 e Sensor—Surface: 1.4mm (Mechanical Surface Detection) e Electronics: DAE4 Sn601; Calibrated: 30.04.2019 * Phantom: Flat Phantom 4.9 (front); Type: QD OOL P49 AA; Serial: 1001 «_ DASY52 52.10.2(1504); SEMCAD X 14.6.12(7470) Dipole Calibration for Head Tissue/Pin=250 mW, d=15mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 63.48 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 3.58 W/kg SAR(1 g) = 2.44 W/kg; SAR(10 g) = 1.58 W/kg Maximum value of SAR (measured) = 3.22 W/kg —2.20 —4.40 —6.60 —8.80 —11.00 0 dB = 3.22 W/kg = 5.08 dBW/kg Certificate No: D835V2—4d069_Jul19 Page 5 of 8

(3 BA ET «ons Snw i Impedance Measurement Plot for Head TSL Eile View Channel Swesp Calibration Trace Scale Marker System Window Help 835.000000 MHz 50.811 0 80.654 pF —2.3632 0 §35.000000 MHz 24.778 mU ¢ —69.710 ° Ch1Avg= 20 Ch1: Start 635000 MHz Stop 1.03500 GHz 835.000000 MHz 119 dB 00 Ch 1 & Chi: Start 625.000 Stop 1.02500 GHz C*1—Port Certificate No: D835V2—4d069_Jul19 Page 6 of 8

TTL CA IET DASY5 Validation Report for Body TSL Date: 18.07.2019 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 835 MHz; Type: D835V2; Serial: D835V2 — SN:4d069 Communication System: UID 0 — CW; Frequency: 835 MHz Medium parameters used: f = 835 MHz; 0 = 0.99 S/m; &, = 54.9; p = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19—2011) DASY52 Configuration: e Probe: EX3DV4 — SN7349; ConvF(10.16, 10.16, 10.16) @ 835 MHz; Calibrated: 29.05.2019 e Sensor—Surface: 1.4mm (Mechanical Surface Detection) e Electronics: DAE4 Sn601; Calibrated: 30.04.2019 e Phantom: Flat Phantom 4.9 (Back); Type: QD OOR P49 AA; Serial: 1005 «_ DASY52 52.10.2(1504); SEMCAD X 14.6.12(7470) Dipole Calibration for Body Tissue/Pin=250 mW, d=15mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 57.81 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 3.65 W/kg SAR(1 g) = 2.46 W/kg; SAR(10 g) = 1.6 W/ikg Maximum value of SAR (measured) = 3.28 W/kg —2.156 —4.30 —6.44 —8.59 —10.74 0 dB = 3.28 W/kg = 5.16 dBW/kg Certificate No: D835V2—40069_Jul19 Page 7 of 8

mm\ TTL CA IET Impedance Measurement Plot for Body TSL File View Channel Sweep Calibration Trace Scale Marker System Window Help 47.073 Q —3.9356 0 50.481 mU ~124.31° Ch1Avg= 20 Chi: Start 635.000 MHz ——— Stop 1.03500 GHz 835.000000 —2$.937 dB 00 00 00 .00 .00 Ch1: Start €35.000 MHz ——— Certificate No: D835V2—4d069_Jul19 Page 8 of 8 songn se e en +

CAICT Calibration a Laboratory of 8 2 S Schweizerischer Kalibrierdienst Schmid & Partner ;ia%z//mé Service suisse d‘étalonnage Engineering AG 5 on t C Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland % //_/\\\\§ S Swiss Calibration Service Yulutabs® Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreementfor the recognition of calibration certificates Client CTTL(Auden) Certificate No: D1750V2—1003_Jul19 CALIBRATION CERTIFICATE Object D1750V2 — SN:1003 Calibration procedure(s) QA CAL—O5.v11 Calibration Procedure for SAR Validation Sources between 0.7—3 GHz Calibration date: July 16, 2019 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environmenttemperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Power meter NRP SN: 104778 03—Apr—19 (No. 217—02892/02893) Apr—20 Power sensor NRP—Z291 SN: 103244 03—Apr—19 (No. 217—02892) Apr—20 Power sensor NRP—Z291 SN: 103245 03—Apr—19 (No. 217—02893) Apr—20 Reference 20 dB Attenuator SN: 5058 (20k) 04—Apr—19 (No. 217—02894) Apr—20 Type—N mismatch combination SN: 5047.2 / 06327 04—Apr—19 (No. 217—02895) Apr—20 Reference Probe EX3DV4 SN: 7349 29—May—19 (No. EX3—7349_May19) May—20 DAE4 SN: 601 30—Apr—19 (No. DAE4—601_Apr19) Apr—20 Secondary Standards ID # Check Date (in house) Scheduled Check Power meter E44198 SN: GB30512475 30—Oct—14 (in house check Feb—19) In house check: Oct—20 Power sensor HP 8481A SN: US37202783 07—Oct—15 (in house check Oct—18) In house check: Oct—20 Power sensor HP 8481A SN: MY41092317 07—Oct—15 (in house check Oct—18) In house check: Oct—20 RF generator R&S SMT—06 SN: 100972 15—Jun—15 (in house check Oct—18) In house check: Oct—20 Network Analyzer Agilent E8358A SN: US41080477 31—Mar—14 (in house check Oct—18) In house check: Oct—19 Name Function Calibrated by: Leif Klysner Laboratory Technician Approved by: Katia Pokovic Technical Manager TE Issued: July 17, 2019 This calibration certificate shall not be reproduced exceptin full without written approval of the laboratory. Certificate No: D1750V2—1003_Jul19 Page 1 of 8

) TTL CAICT C Calibration ‘ Laboratory of S Schweizerischer Kalibrierdienst Schmid & Partner Cc Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland S Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreementfor the recognition of calibration certificates Glossary: TSL tissue simulating liquid ConvF sensitivity in TSL / NORM x.y.z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) IEC 62209—1, "Measurement procedure for the assessment of Specific Absorption Rate (SAR) from hand—held and body—mounted devices used next to the ear (frequency range of 300 MHz to 6 GHz)", July 2016 c) IEC 62209—2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)", March 2010 d) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Additional Documentation: e) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: e Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. e Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented paralle! to the body axis. e Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. e Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. e SAR measured: SAR measured at the stated antenna input power. e SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. e SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. Certificate No: D1750V2—1003_Jul19 Page 2 of 8

8 CAIET Measurement Conditions DASY system configuration, as far as not given on page 1. DASY Version DASYS V52.10.2 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy, dz =5 mm Frequency 1750 MHz # 1 MHz Head TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 40.1 1.37 mho/m Measured Head TSL parameters (22.0 £0.2) °C 40.2 + 6 % 1.34 mho/m # 6 % Head TSL temperature change during test <0.5 °C ———— ——— SAR result with Head TSL SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 250 mW input power 9.01 Wikg SAR for nominal Head TSL parameters normalized to 1W 36.6 Wikg * 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 250 mW input power 4.77 Wikg SAR for nominal Head TSL parameters normalized to 1W 19.3 Wikg £ 16.5 % (k=2) Body TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 53.4 1.49 mho/m Measured Body TSL parameters (22.0 £0.2) °C 53.5 + 6 % 1.46 mho/m * 6 % Body TSL temperature change during test <0.8 °C ———— ——— SAR result with Body TSL SAR averaged over 1 cm‘ (1 g) of Body TSL Condition SAR measured 250 mW input power 9.07 W/kg SAR for nominal Body TSL parameters normalized to 1W 36.8 Wikg * 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 250 mW input power 4.83 Wikg SAR for nominal Body TSL parameters normalized to 1W 19.5 Wikg * 16.5 % (k=2) Certificate No: D1750V2—1003_Jul19 Page 3 of 8

8 CAIET Appendix (Additional assessments outside the scope of SCS 0108) Antenna Parameters with Head TSL Impedance, transformed to feed point 51.0 Q + 0.1 jQ Return Loss — 39.9 dB Antenna Parameters with Body TSL Impedance, transformed to feed point 45.6 Q + 0.2 jQ Return Loss —26.7 dB General Antenna Parameters and Design LEIectricaI Delay (one direction) 1.213 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Certificate No: D1750V2—1003_Jul19 Page 4 of 8

&7TTL CAIET DASY5 Validation Report for Head TSL Date: 16.07.2019 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 1750 MHz; Type: D1750V2; Serial: D1750V2 — SN:1003 Communication System: UID 0 — CW; Frequency: 1750 MHz Medium parameters used: f= 1750 MHz; 0 = 1.34 S/m; s = 40.2; p = 1000 kg/m‘ Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI €63.19—2011) DASY52 Configuration: e Probe: EX3DV4 — SN7349; ConvF(8.67, 8.67, 8.67) @ 1750 MHz; Calibrated: 29.05.2019 e Sensor—Surface: 1.4mm (Mechanical Surface Detection) e Electronics: DAE4 Sn601; Calibrated: 30.04.2019 e Phantom: Flat Phantom 5.0 (front); Type: QD 000 P50 AA; Serial: 1001 & DASY52 52.10.2(1504); SEMCAD X 14.6.12(7470) Dipole Calibration for Head Tissue/Pin=250 mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 106.1 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 16.6 W/kg SAR(I g) =9.01 W/kg; SAR(10 g) = 4.77 W/kg Maximum value of SAR (measured) = 13.9 W/kg dB 0 —3.40 —6.80 —10.20 —13.60 —17.00 0 dB = 13.9 W/kg= 11.43 dBW/kg Certificate No: D1750V2—1003_Jul19 Page 5 of 8 ~ n ue > v —

V TTL CAICT Impedance Measurement Plot for Head TSL File View Channel Sweep Calibration Trace Scale Marker System Window Help 1.750000 GHz 51.016 0 12.826 pH 141.03 mQ y 1750000 GHz 10.155 mU 3| 78224 ° Ch1Avg= 20 Chi: Start 1.55000 GHz —— Stop 1.95000 GHz 0.00 .00 50000 QHz —3$9.967 dB 00 00 00 00 00 00 00 Ch1: Start 1 Stop 1.95000 GHz Status CH 1: 11 ] C* 1—Port Avg=20 Delay LCL Certificate No: D1750V2—1003_Jul19 Page 6 of 8 No nrucncgc e c >

® CAICT DASY5 Validation Report for Body TSL Date: 16.07.2019 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 1750 MHz; Type: D1750V2; Serial: D1750V2 — SN:1003 Communication System: UID 0 — CW; Frequency: 1750 MHz Medium parameters used: f = 1750 MHz; 0 = 1.46 S/m; & = 53.5; p = 1000 kg/m* Phantom section: Flat Section Measurement Standard: DASYS (IEEE/IEC/ANSI C€63.19—2011) DASY52 Configuration: e Probe: EX3DV4 — SN7349; ConvF(8.45, 8.45, 8.45) @ 1750 MHz; Calibrated: 29.05.2019 e Sensor—Surface: 1.4mm (Mechanical Surface Detection) e Electronics: DAE4 Sn601; Calibrated: 30.04.2019 e Phantom: Flat Phantom 5.0 (back); Type: QD 000 P50 AA; Serial: 1002 & DASY52 52.10.2(1504); SEMCAD X 14.6.12(7470) Dipole Calibration for Body Tissue/Pin=250 mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 101.3 V/m; Power Drift =—0.06 dB Peak SAR (extrapolated) = 16.0 W/kg SAR(I g) = 9.07 W/kg; SAR(10 g) =4.83 W/kg Maximum value of SAR (measured) = 13.6 W/kg —3.20 —6.40 —9.60 —12.80 —16.00 0 dB = 13.6 W/kg = 11.34 dBW/kg Certificate No: D1750V2—1003_Jul19 Page 7 of 8 ~ n ue > v —

(3) CAICT Impedance Measurement Plot for Body TSL IEile View Channel Sweep Calibration Trace Scale Marker System Window Help ~ 1750000 GoHz 45.8B07 0 17.886 pH 198.45 mQ Y 1750000 GHz Ch1Aug= 20 Ch1: Start 1.55000 GHz —— Stop 1.95000 GHz 1,j50000 00 00 00 00 00 Chi: Start 1 He ——— Stop 1.95000 GHz Status CH 1: C*1—Port Ayg=20 Delay LCL Certificate No: D1750V2—1003_Jul19 Page 8 of 8 Rm vrun nc c e cez ns

TTL y Calibration Laboratory of w S «x) 3 Schweizerischer Kalibrierdienst m w o S 9, Schmid & Partner g\‘ Service suisse d‘étalonnage Engineering AG zn Servizio svizzero di taratura sR wl l Zeughausstrasse 43, 8004 Zurich, Switzerland Swiss Calibration Service YAadotabs s 2 Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreementfor the recognition of calibration certificates Client CTTL (Auden) Certificate No: D1900V2—5d101_Jul19 CALIBRATION CERTIFICATE Object D1900V2 — SN:5d101 Calibration procedure(s) QA CAL—O5.v11 Calibration Procedure for SAR Validation Sources between 0.7—3 GHz Calibration date: July 17, 2019 This calibration certificate documents the traceability to national standards, which realize the physicalunits of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Power meter NRP SN: 104778 03—Apr—19 (No. 217—02892/02893) Apr—20 Power sensor NRP—Z91 SN: 103244 03—Apr—19 (No. 217—02892) Apr—20 Power sensor NRP—Z91 SN: 103245 03—Apr—19 (No. 217—02893) Apr—20 Reference 20 dB Attenuator SN: 5058 (20k) 04—Apr—19 (No. 217—02894) Apr—20 Type—N mismatch combination SN: 5047.2 / 06327 04—Apr—19 (No. 217—02895) Apr—20 Reference Probe EX3DV4 SN: 7349 29—May—19 (No. EX3—7349_May19) May—20 DAE4 SN: 601 30—Apr—19 (No. DAE4—601_Apr19) Apr—20 Secondary Standards ID # Check Date (in house) Scheduled Check Power meter E4419B SN: GB39512475 30—Oct—14 (in house check Feb—19) In house check: Oct—20 Power sensor HP 8481A SN: US37202783 07—Oct—15 (in house check Oct—18) In house check: Oct—20 Power sensor HP 8481A SN: MY41092317 07—Oct—15 (in house check Oct—18) In house check: Oct—20 RF generator R&S SMT—06 SN: 100972 15—Jun—15 (in house check Oct—18) In house check: Oct—20 Network Analyzer Agilent E8358A SN: US41080477 31—Mar—14 (in house check Oct—18) In house check: Oct—19 Name Function Signature Calibrated by: Michael Weber Laboratory Technician Approved by: KatJa Pokovic Technical Manager 2LE Issued: July 19, 2019 This calibration certificate shall not be reproduced exceptin full without written approval of the laboratory. Certificate No: D1900V2—5d101_Jul19 Page 1 of 8

TTL ( Calibration Laboratory of Schmid & Partner Engineering AG Zeughausstrasse 43, 8004 Zurich, Switzerland $E ila\iin{/&;’e 4’4///—;\\\\\\3 > S C S Schweizerischer Kalibrierdienst Service suisse d‘étalonnage Servizio svizzero di taratura Swiss Calibration Service Trlitube®® Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid ConvF sensitivity in TSL / NORM x,y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) IEC 62209—1, "Measurement procedure for the assessment of Specific Absorption Rate (SAR) from hand—held and body—mounted devices used next to the ear (frequency range of 300 MHz to 6 GHz)", July 2016 c) IEC 62209—2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)", March 2010 d) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Additional Documentation: e) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: e Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. e Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. e Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. e Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. e SAR measured: SAR measured at the stated antenna input power. e SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. e SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. Certificate No: D1900V2—5d101_Jul19 Page 2 of 8 toge evv ve k oes

Measurement Conditions DASY system configuration, as far as not iven on page 1. DASY Version DASY5 V52.10.2 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy, dz =5 mm Frequency 1900 MHz + 1 MHz Head TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 40.0 1.40 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 41.5 16 % 1.37 mho/m + 6 % Head TSL temperature change during test <0.5 °C ~—~ «—+— SAR result with Head TSL SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 250 mW input power 9.71 W/kg SAR for nominal Head TSL parameters normalized to 1W 39.7 W/kg + 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 250 mW input power 5.12 Wikg SAR for nominal Head TSL parameters normalized to 1W 20.8 Wikg * 16.5 % (k=2) Body TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 53.3 1.52 mho/m Measured Body TSL parameters (22.0 £ 0.2) °C 54.1 +6 % 1.48 mho/m + 6 % Body TSL temperature change during test <0.5 °C SAR result with Body TSL SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 250 mW input power 9.74 Wikg SAR for nominal Body TSL parameters normalized to 1W 39.7 W/kg + 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 250 mW input power 5.17 W/kg SAR for nominal Body TSL parameters normalized to 1W 20.9 W/kg + 16.5 % (k=2) Certificate No: D1900V2—5d101_Jul19 Page 3 of 8

s S Appendix (Additional assessments outside the scope of SCS 0108) Antenna Parameters with Head TSL Impedance, transformed to feed point 50.7 Q + 4.6 jQ Return Loss — 26.6 dB Antenna Parameters with Body TSL Impedance, transformed to feed point 46.5 Q + 6.4 jQ Return Loss — 22.4 dB General Antenna Parameters and Design Electrical Delay (one direction) 1.203 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Certificate No: D1900V2—5d101_Jul19 Page 4 of 8


Document Created: 2019-10-10 17:15:13
Document Modified: 2019-10-10 17:15:13
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC