I19Z61557-SEM01_SAR_Rev0_7

FCC ID: ZNFX540EMW

RF Exposure Info

Download: PDF
FCCID_4462402

Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5300 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 68.18 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 29.0 W/kg SAR(I g) =7.52 W/kg; SAR(10 g) = 2.13 W/kg Maximum value of SAR (measured) = 17.4 W/kg Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5500 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 69.45 V/m; Power Drift = 0.00 dB Peak SAR (extrapolated) = 32.7 W/kg SAR(I g) = 8 W/kg; SAR(10 g) = 2.23 W/kg Maximum value of SAR (measured) = 19.1 W/kg Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5600 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 68.13 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 32.9 W/kg SAR(1 g) =7.87 W/kg; SAR(10 g) = 2.22 W/kg Maximum value of SAR (measured) = 18.8 W/kg Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5750 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 67.49 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 34.1 W/kg SAR(1 g) = 7.79 W/kg; SAR(10 g) = 2.18 W/kg Maximum value of SAR (measured) = 19.0 W/kg Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5800 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 66.59 V/m; Power Drift =0.01 dB Peak SAR (extrapolated) = 32.0 W/kg SAR(I g) =7.51 W/kg; SAR(10 g) = 2.09 W/kg Maximum value of SAR (measured) = 18.0 W/kg Certificate No: D5GHzV2—1060_Jul19 Page 20 of 23

—12.00 —18.00 —24.00 —30.00 0 dB = 18.0 W/kg = 12.55 dBW/kg Certificate No: D5GHzV2—1060_Jul19 Page 21 of 23

) (I Impedance Measurement Plot for Body TSL (5200, 5250, 5300, 5500, 5600 MHz) File View Channel Sweep Calibration Trace Scale Marker System Window Help 5.200000 GHz 48.986 0 5.4607 pF —5.6049 N 5.250000 GHz 47.977 0 14.071 pF —2.1544 N1 5.300000 GHz 46.926 a 9.9366 pF 30221 0 5500000 GHz 50.168 13.131 pF 22038 n 5.600000 GHz 55.522 0 27.781pH 97751 m0 Ch1Aug= 20 Ch1: Start 5.00000 GHa ——— Stop £.00000 GHz T7 GHz —29.089 dB 00 ChiAvg= Ch1: Start 5.00000 GHz State —_Cai:—cBir 0o {cCuiron Avg=20 Delay LCL Certificate No: D5GHzV2—1060_Jul19 Page 22 of 23

® I||I> TTL ty o n — 9 ~> > — ( Impedance Measurement Plot for Body TSL (5750, 5800 MHz) File View Channel Sweep Calibration Trace Scale Marker System Window Help 5.750000 GHz 52.337 A 22.141pH 799.92m0 5.900000 GHz §2.094 N 14.931 pF —1.8378 a Ch1Aug= 20 Ch1 : Start 5,00000 GHa —— Stop 6.00000 GHz to.00 5.00 _____| 5.{50000 GHz oncos on 0.00 F5.00 F10.00 F15.00 F20.00 F25.00 F30.00 F35.00 +40.00 Ch 1 Avg= |20 Ch1 : Start 5.00000 GHa —— Stop £.00000 GHz CH 1: C*1—Port Certificate No: D5GHzV2—1060_Jul19 Page 23 of 23

No.I19Z61557-SEM01 Page 188 of 192 ANNEX I Sensor Triggering Data Summary . According to the above description, this device was tested by the manufacturer to determine the SAR sensor triggering distances for the rear and bottom edge of the device. The measured power state within ±5mm of the triggering points (or until touching the phantom) is included for rear and each applicable edge. To ensure all production units are compliant it is necessary to test SAR at a distance 1mm less than the smallest distance from the device and SAR phantom with the device at maximum output power without power reduction. ©Copyright. All rights reserved by CTTL.

No.I19Z61557-SEM01 Page 189 of 192 We tested the power and got the different proximity sensor triggering distances for front, rear and bottom edge. But the manufacturer has declared 2mm is the most conservative triggering distance for main antenna. So base on the most conservative triggering distance of 2mm, additional SAR measurements were required at 1mm from the highest SAR position. Front Moving device toward the phantom: The power state Distance 7 6 5 4 3 2 1 0 [mm] Main Normal Normal Normal Normal Normal Low Low Low antenna Moving device away from the phantom: The power state Distance 0 1 2 3 4 5 6 7 [mm] Main Low Low Normal Normal Normal Normal Normal Normal antenna Rear Moving device toward the phantom: The power state Distance 7 6 5 4 3 2 1 0 [mm] Main Normal Normal Normal Normal Normal Low Low Low antenna Moving device away from the phantom: The power state Distance 0 1 2 3 4 5 6 7 [mm] Main Low Low Normal Normal Normal Normal Normal Normal antenna Bottom Edge Moving device toward the phantom: The power state Distance 7 6 5 4 3 2 1 0 [mm] Main Normal Normal Normal Normal Normal Low Low Low antenna ©Copyright. All rights reserved by CTTL.

No.I19Z61557-SEM01 Page 190 of 192 Moving device away from the phantom: The power state Distance 0 1 2 3 4 5 6 7 [mm] Main Low Low Normal Normal Normal Normal Normal Normal antenna The influence of table tilt angles to proximity sensor triggering is determined by positioning each edge that contains a transmitting antenna, perpendicular to the flat phantom, at the smallest sensor triggering test distance by rotating the device around the edge next to the phantom in ≤ 10° increments until the tablet is ±45°or more from the vertical position at 0°. The Front evaluation for main antenna The rear evaluation for main antenna ©Copyright. All rights reserved by CTTL.

No.I19Z61557-SEM01 Page 191 of 192 The bottom edge evaluation for main antenna Based on the above evaluation, we come to the conclusion that the sensor triggering is not released and normal maximum output power is not restored within the ±45°range at the smallest sensor triggering test distance declared by manufacturer. ©Copyright. All rights reserved by CTTL.

No.I19Z61557-SEM01 Page 192 of 192 ANNEX J Accreditation Certificate ©Copyright. All rights reserved by CTTL.


Document Created: 2019-09-25 16:24:11
Document Modified: 2019-09-25 16:24:11
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC