RF Exposure Info 3

FCC ID: ZNFX120WM

RF Exposure Info

Download: PDF
FCCID_4413843

Impedance & Return-Loss Measurement Plot for Head TSL Object: Date Issued: Page 3 of 4 D2450V2 – SN: 719 08/09/2018

Impedance & Return-Loss Measurement Plot for Body TSL Object: Date Issued: Page 4 of 4 D2450V2 – SN: 719 08/09/2018

Calibration Laboratory of Schweizerscher Kallbrlerdienst Schmid & Partner 3 Service sulese d‘étalonnage Engineering AG C Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland S Swiss Callbration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreementfor the recognition of calibration certificates Client PC Tést Certificate No: D2450V2—797_Sep17 CALIBRATION CERTIFICATE , I Object D2450V2 «~SN:797 _ Callbration procedure(s) QA CAL—O5.v9" Calibration procedure for dipole validation kits above 700 MHz 4C J 10 lflpo l'] Y Callbration date: September 11,:2017 | Exftm&u( N q L6 /lgad This calibration certificate documents the traceability to natlonal standards, which reallze the physical unlts of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 2 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Power meler NRP SN: 104778 04—Apt—17 (No, 217—02521/02522) Apr—18 Power sensor NRP—Z831 SN: 109244 04—Apr=17 (No, 217—02521) Apr—18 Power sensor NRP—Z91 SN: 103245 04—Apr~17 (No. 217—02522) Apr—18 Reference 20 dB Attenuator SN: 6058 (20k) 07—Apr—17 (No, 217—02528) Apr—18 Type—N mismatch combination SN: 5047.2 / 08827 O7—Apt—17 (No, 217—02520) Apr—18 Reference Probe EX3DV4 SN: 7349 31—May—17 (No. EX3—7349_May17) May—18 ~ DAE4 SN: 601 28—Mar—17 (No, DAE4—601_Marl7) Mar—18 M Secondary Standards ID # Check Date (inhouse) Scheduled Check Power mater EPM—442A SN: ©B37480704 07—Oct—15 (in house check Oct—16) In house check: Oct—18 Power sensor HP 8481A SN: USayz927es 07—Oct—15 (in house chack Oct—16) In house check: Oct—18 Power sensor HP 8481A SN: MY41092317 07—Oct—15 (in house check Oct—16) In house check: Oct—18 RF generator R&S SMT—08 SN: 100972 15—Jun—15 (in hause check Oct—16} in house check: Oct—18 Network Analyzer HP 8758E SN: Ussysooses 18—O0ct—01 (in house check Oct—16) In house check: Oct—17 Name . Function Signgture Calibrated by: Michae} Weber Laboratory Techniclan m;—- 2 Approved by: Kalja Pokovie Technlcal Manager ' Wé Isaued: September 11, 2017 This callbration certificate shall not be reproduced except in full without written approval of the laboratory. Cortificate No: D2450V2—797_Sep17 Page 1 of 8

Calibration Laboratory of S‘\‘@”’e g Schwelzerischer Kalibrierdienst Schmid & Partner M c Service sulsse d‘étalonnage Engineering AG prae Servizio svizzero di teratura Zeughausstrasse 43, 8004 Zurich, Switzerland *6@\&? S Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid ConvF sensitivity in TSL / NORM x,y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) IEC 62209—1, "Measurement procedure for the assessment of Specific Absorption Rate (SAR) from hand—held and body—mounted devices used next to the ear (frequency range of 300 MHz to 6 GH2z)", July 2016 c) {EC 62209—2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)"®, March 2010 d) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Additional Documentation: e) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: » Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. * Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented paralie! to the body axis. e Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected pawer, No uncertainty required. * Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. * SAR measured: SAR measured at the stated antenna input power. * SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. & SAR for nominal TSL parameters; The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. : Certificate No: D2450V2—797_Sepi7 Page 2 of 8

Measurement Conditions DASY system configuration, as far as not iven on page 1. DASY Version DASYS5 V52.10.0 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy, dz =5 mm Frequency 2450 MHz +1 MHz Head TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 39.2 1.80 mho/m Measured Head TSL parameters (22.0 £ 0.2) °C 37.8 +6 % 1.86 mho/m + 6 % Head TSL temperature change during test <0.5 °C ——— =—— SAR result with Head TSL SAR averaged over 1 em‘ (1 g) of Head TSL Condition SAR measured 250 mW input power 13.5 Wikg SAR for nominal Head TSL parameters normalized to 1W 52.7 Wikg « 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 250 mW input power 6.28 Wikg SAR for nominal Head TSL parameters normalized to 1W 24.8 Wikg £16.5 %(k=2) Body TSL parameters * The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 52.7 1.95 mho/m Measured Body TSL parameters (22.0 £0.2) °C 51.9 +6 % 2.04 mho/m # 6 % Body TSL temperature change during test <0.5 °C ~e— me== SAR result with Body TSL SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 250 mW input power 18.1 Wikg SAR for nominal Body TSL parameters normalized to 1W 51.1 Wikg # 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 250 mW input power 6.14 Wikg SAR for nominal Body TSL parameters normalized to 1W 24.2 Wikg + 16.5 % (K=2) Certificate No: D2450/2—797_Sep17 Page 3 of 8

Appendix (Additional assessments outside the scope of SCS 0108) Antenna Parameters with Head TSL Impedance, transformed to feed point 58.8 Q +7.4 |Q Return Loss ~21.9 dB Antenna Parameters with Body TSL ' Impedance, transformed to feed point 49.7 Q + 9.1 jQ Return Loss —20.9 dB General Antenna Parameters and Design Electrical Delay (one direction) 1.152 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Manufactured on January 24, 2006 Certificate No: D2450V2—797_Sep17 Page 4 of 8

DASYS5 Validation Report for Head TSL Date: 11.09.2017 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 — SN: 797 Communication System: UID 0 — CW; Frequency: 2450 MHz Medifum parameters used: £ = 2450 MHz; 0 = 1.86 S/m; & = 37.8; p = 1000 kg/m? Phantom section: Flat Section Measurement Standard: DASYS (IEEE/IEC/ANSI C63.19—2011) DASYS52 Configuration: * Probe: EX3DV4 — SN7349; ConvF(8.12, 8.12, 8.12); Calibrated: 31.05.2017; * Sensor—Surface:; 1. 4mm (Mechanical Surface Detection) » Electronics: DAE4 S$n601; Calibrated: 28.03.2017 «_ Phantom: Flat Phantom 5.0 (front); Type: QD 000 P5Q AA; Serial: 1001 «_ DASY52 52.10.0(1446); SEMCAD X 14.6.10(7417) Dipole Calibration for Head Tissue/Pin=250 mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value=113.5 V/m; Power Drift = —0.08 dB Peak SAR (extrapolated) = 26.9 W/kg SAR(I g) = 13.5 W/kg; SAR(10 g) = 6.28 W/kg Maximum value of SAR {measured) = 21.6 W/kg dB ~4.80 —9.60 —14.40 ~19.20 —24.00 0 dB = 21.6 W/kg = 13.34 dBW/kg Certificate No: D2450V2—797_Sep17 Page 5 of 8

Impedance Measurement Plot for Head TSL 11 Sep 2017 £1t52157 si4 4 uors 11 59.777 a 7.4395 LCA _ 0. 483.28 pH 2 450.000 000 MHz Uel Ca fug 16 HLd CH2 & Ca Ay 16° HL d START 2 250.000 000 MHz STOP 2 650.000 000 MHz Certificate No: D2450V2—797_Sep17 Page 6 of 8

DASY5 Validation Report for Body TSL Date: 11.09.2017 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 — SN: 797 Communication System: UID 0 — CW; Frequency: 2450 MHz Medium parameters used: f = 2450 MHz; o = 2.04 S/m; & = 51.9; p = 1000 kg/m* Phantom section: Flat Section Measurement Standard: DASYS (IEEE/IEC/ANSI C63.19—2011) DASY52 Configuration: Probe: EX3DV4 — SN7349; ConvF(8.1, 8.1, 8.1); Calibrated: 31.05.2017; Sensor—Surface: 1.4mm (Mechanical Surface Detection) Electronics: DAEA4 $n601; Calibrated: 28.03.2017 Phantom: Flat Phantom 5.0 (back); Type: QD 000 P50 AA; Serial: 1002 DASY52 52.10.0(1446); SEMCAD X 14.6.10(7417) Dipole Calibration for Body Tissue/Pin=250 mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 105.4 V/m; Power Drift=—0.08 dB Peak SAR (extrapolated) =25.6 W/kg SAR(I g) = 13.1 W/kg; SAR(10 g) = 6.14 W/kg Maximum value of SAR (measured) = 20.3 W/kg ~4.40 ~8.80 —13.20 17.60 ~22.00 0 dB = 20.3 W/kg = 13.07 dBW/kg Certificate No: D2450V2—797_Sep17 Page 7 of 8

Impedance Measurement Plot for Body TSL 41 Sep 2017 11152110 CH4 sii 1 U F5 4149.725 a 9$.0703 n 589,22 pH 2459.000 000 MHz n p_ Del C& Ay 16 °® H1d CH2 Ca ny 16° HI d START 2 250,000 @80 MHz STOP 2 §50.000 098 MHz Certificate No: D2450V2—797_Sep17 Page 8 of 8

arceresar PCTEST ENGINEERING LABORATORY, INC. wntlty slh Rfrmmemmins Tokr110,200.0008IFax»1—l162006058 hitps/waw.petest.com Certification of Calibration Object D2450V2 — SN: 797 Calibration procedure(s) Procedure for Calibration Extension for SAR Dipoles. Extended Calibration date: September 11, 2018 Description: SAR Validation Dipole at 2450 MHz. Calibration Equipmentkused: Manufacturer Model _ _ Deseription . _ [| Gal Date Gal Interval |_Cal Due _| Serial Number Contral Company 4040 Therm,/Clock/Humidity Monitor 3/31/2017 Blennial afi/ros 170232304 Contral Company 4952 Ultra Long Stem Thermometer s/2hr0x? Blennial s/272019 170330156 Ampliier Research issice Amplifier cer N/A cBt 433971 Narda 47723 Attenuator (30B) cBt N/A ce 9405 Keysight TD Dual Ofrectional Coupler cet N/A car AY52180215 Keysight Technologies ssosa Standard Mechanical Callbration Kit (DC to 9Gtiz, 3.Smm) sfarzos Annual e/afors rvszaonin Agllent s753Es 5 Parameter Vector Network Analyzer sfaofrons Annual s7a0fiois mivacoosea1. Minl—Circuits BW—N2OWS+ DC to 18 GHz Freclsion Fixed 20 dB Attenuator cBt N/A cer N/A SPEAG DAC3.5 Dielectric Assessment Kit shsfroms Anoual shsfaos 1070 SPEAG BGove SAR Probe 7hopows Annual 7a0fis 7amo SPEAG DAR4 Dasy Date Acquisition Electrontcs Tharow Ancual rhipor 1322 SPEAG EsgDV3 SAProbe ahafroim Annual 3hafrors 3319 SPEAG DaAB4 Dasy Data Acqubsition Electrontcs arfiois Annual aftfrers 1368 Antitsu MA2UB Pulse Power Sensor 3/2rou Annual EHEE 1207364 Anitsu Miriie Pulse Power Sensor 3p9]m8 Annial 3/afzor8 1330018 Anvitsu ML2495A Power Meter 10/22/2087| Annual 10/22/ro1] 1323004 Aglient NS182A MXG Vector Signal Generator ani8fzou8 Annal 4/i8/2019 iiva74z0s00 Seekonk NC—100 Torgue Wrench Thijrois Annual Thatow N/A MiniCiroults VLF—6000+ Low Pass Filter " cat N/A cer N/A Narda 401406 4 — 8 itz SMA 6 dB Directional Coupler car N/A cer N/A Note: CBT (Calibrated Before Testing). Prior to testing, the measurement paths containing a cable, amplifier, attenuator, coupler or filter were connected to a calibrated source (e. a signal generator) to determine the losses of the measurement path. Measurement Uncertainty = £23% (k=2) Name Function Signature Calibrated By: Brodie Halbfoster Team Lead Engineer _Brovce {usrostee_ Approved By: Kaitlin O‘Keefe Senior Technical ML_ Manager Object: Date Issued: Page 1 of 4 D2450V2 — SN: 797 09/11/2018

DIPOLE CALIBRATION EXTENSION Per KDB 865664 D01, calibration intervals of up to three years may be considered for reference dipoles when it is demonstrated that the SAR target, impedance and return loss of a dipole have remained stable according to the following requirements: 1. The measured SAR does not deviate more than 10% from the target on the calibration certificate. 2. The return-loss does not deviate more than 20% from the previous measurement and meets the required 20dB minimum return-loss requirement. 3. The measurement of real or imaginary parts of impedance does not deviate more than 5Ω from the previous measurement. The following dipole was checked to pass the above 3 requirements to have 2-year calibration period from the calibration date: Certificate Certificate Measured Measured Certificate Measured Certificate Measured Certificate SAR Target SAR Target Difference Certificate Measured Calibration Head SAR (1g) Deviation 1g Head SAR Deviation 10g Impedance Impedance Difference Impedance Impedance Extension Date Electrical Head (1g) Head (10g) (Ohm) Return Loss Return Loss Deviation (%) PASS/FAIL Date W/kg @ 20.0 (%) (10g) W/kg @ (%) Head (Ohm) Head (Ohm) (Ohm) Real Head (Ohm) Head (Ohm) Delay (ns) W/kg @ 20.0 W/kg @ 20.0 Imaginary Head (dB) Head (dB) dBm 20.0 dBm Real Real Imaginary Imaginary dBm dBm 9/11/2017 9/11/2018 1.152 5.27 5.52 4.74% 2.48 2.54 2.42% 53.8 49.8 4 7.4 7.1 0.3 -21.9 -23 -4.80% PASS Certificate Certificate Measured Measured Certificate Measured Certificate Measured Certificate SAR Target SAR Target Difference Certificate Measured Calibration Body SAR (1g) Deviation 1g Body SAR Deviation 10g Impedance Impedance Difference Impedance Impedance Extension Date Electrical Body (1g) Body (10g) (Ohm) Return Loss Return Loss Deviation (%) PASS/FAIL Date W/kg @ 20.0 (%) (10g) W/kg @ (%) Body (Ohm) Body (Ohm) (Ohm) Real Body (Ohm) Body (Ohm) Delay (ns) W/kg @ 20.0 W/kg @ 20.0 Imaginary Body (dB) Body (dB) dBm 20.0 dBm Real Real Imaginary Imaginary dBm dBm 9/11/2017 9/11/2018 1.152 5.11 5.17 1.17% 2.42 2.37 -2.07% 49.7 49.8 0.1 9.1 7.2 1.9 -20.9 -22.6 -8.20% PASS Object: Date Issued: Page 2 of 4 D2450V2 – SN: 797 09/11/2018

Impedance & Return—Loss Measurement Plot for Head TSL 14 Sep 2018 G4ri4139 CH] sn 4 uogs 1 49.080 a 7,08t0 C208 a 460.69 pH 2 480,000 000 HHz cENTER 2 450.000 000 MHz sratl 400,000 000 Mz 11 Sep 2018 o4itsido CHI sii_ LoG_____ s dB/Rtr —20 ds 11—22.958 db 2 450.000 000 MHz CEHTER2 450.000 600 NHz Object: Date Issued: Page 3 of 4 D2450V2 —— SN: 797 os/11/2018

Impedance & Return—Loss Measurement Plot for Body TSL 44 Sep 2010 Dardii57 CH3) sir i U Fs 4149.779 a 2389 4* a 470.24 pH 2 450.000 000 HHz tel Sho fvs cEHTER 2 452.000 060 HHz seai «00.000 009 Mz 11 Sep 2018 @41t112% C# in Los s cB/Rer —20_a8 11—22.619 do 2 450.000 coo NXz fel Sno by 15° ~~cENTER 2 450.000 ab0 Niz SPall 400.000 00 lz Object: Date Issued: Page 4 of 4 D2450V2— SN: 797 09711/2018

APPENDIX D: SAR TISSUE SPECIFICATIONS Measurement Procedure for Tissue verification: 1) The network analyzer and probe system was configured and calibrated. 2) The probe was immersed in the tissue. The tissue was placed in a nonmetallic container. Trapped air bubbles beneath the flange were minimized by placing the probe at a slight angle. 3) The complex admittance with respect to the probe aperture was measured 4) The complex relative permittivity ε’ can be calculated from the below equation (Pournaropoulos and Misra): j 2ωε r ε 0 b b π [ exp − jωr ( µ 0ε r' ε 0 )1 / 2 ] Y= [ln(b a )]2 ∫ ∫ ∫ a a 0 cos φ ′ r dφ ′dρ ′dρ where Y is the admittance of the probe in contact with the sample, the primed and unprimed coordinates refer to source and observation points, respectively, r 2 = ρ 2 + ρ ′2 − 2 ρρ ′ cos φ ′ , ω is the angular frequency, and j = −1 . Figure D-1 Note: Liquid recipes are proprietary SPEAG. Since the composition is approximate to the actual liquids utilized, the manufacturer tissue-equivalent liquid data sheets are provided below. Approved by: FCC ID: ZNFX120WM SAR EVALUATION REPORT Quality Manager Test Dates: DUT Type: APPENDIX D: 07/15/19 - 07/24/19 Portable Handset Page 1 of 3 © 2019 PCTEST Engineering Laboratory, Inc. REV 21.3 M 02/15/2019

Figure D-2 750 – 5800 MHz Body Tissue Equivalent Matter Approved by: FCC ID: ZNFX120WM SAR EVALUATION REPORT Quality Manager Test Dates: DUT Type: APPENDIX D: 07/15/19 - 07/24/19 Portable Handset Page 2 of 3 © 2019 PCTEST Engineering Laboratory, Inc. REV 21.3 M 02/15/2019

Figure D-3 750 – 5800 MHz Head Tissue Equivalent Matter Approved by: FCC ID: ZNFX120WM SAR EVALUATION REPORT Quality Manager Test Dates: DUT Type: APPENDIX D: 07/15/19 - 07/24/19 Portable Handset Page 3 of 3 © 2019 PCTEST Engineering Laboratory, Inc. REV 21.3 M 02/15/2019

APPENDIX E: SAR SYSTEM VALIDATION Per FCC KDB Publication 865664 D02v01r02, SAR system validation status should be documented to confirm measurement accuracy. The SAR systems (including SAR probes, system components and software versions) used for this device were validated against its performance specifications prior to the SAR measurements. Reference dipoles were used with the required tissue- equivalent media for system validation, according to the procedures outlined in FCC KDB Publication 865664 D01v01r04 and IEEE 1528-2013. Since SAR probe calibrations are frequency dependent, each probe calibration point was validated at a frequency within the valid frequency range of the probe calibration point, using the system that normally operates with the probe for routine SAR measurements and according to the required tissue-equivalent media. A tabulated summary of the system validation status including the validation date(s), measurement frequencies, SAR probes and tissue dielectric parameters has been included. Table E-1 SAR System Validation Summary – 1g CW VALIDATION MOD. VALIDATION SAR Freq. Probe Cond. Perm. Date Probe Cal Point System (MHz) SN (σ) (εr) PROBE PROBE MOD. DUTY SENSITIVITY PAR LINEARITY ISOTROPY TYPE FACTOR E 750 2/6/2019 3589 750 Head 0.891 43.677 PASS PASS PASS N/A N/A N/A E 835 2/6/2019 3589 835 Head 0.922 43.47 PASS PASS PASS GMSK PASS N/A H 835 6/6/2019 7406 835 Head 0.93 43.8 PASS PASS PASS GMSK PASS N/A H 1750 6/19/2019 7406 1750 Head 1.362 39.781 PASS PASS PASS N/A N/A N/A H 1900 7/16/2019 7406 1900 Head 1.437 38.944 PASS PASS PASS GMSK PASS N/A E 2450 2/5/2019 3589 2450 Head 1.825 39.836 PASS PASS PASS OFDM/TDD PASS PASS D 750 7/2/2019 3914 750 Body 0.945 57.55 PASS PASS PASS N/A N/A N/A O 835 7/3/2019 7538 835 Body 0.972 55.349 PASS PASS PASS GMSK PASS N/A G 1750 7/11/2019 7409 1750 Body 1.445 53.92 PASS PASS PASS N/A N/A N/A I 1900 4/29/2019 7357 1900 Body 1.584 51.771 PASS PASS PASS GMSK PASS N/A K 2450 3/6/2019 7417 2450 Body 2.039 50.67 PASS PASS PASS OFDM/TDD PASS PASS NOTE: While the probes have been calibrated for both CW and modulated signals, all measurements were performed using communication systems calibrated for CW signals only. Modulations in the table above represent test configurations for which the measurement system has been validated per FCC KDB Publication 865664 D01v01r04 for scenarios when CW probe calibrations are used with other signal types. SAR systems were validated for modulated signals with a periodic duty cycle, such as GMSK, or with a high peak to average ratio (>5 dB), such as OFDM according to FCC KDB Publication 865664 D01v01r04. Approved by: FCC ID: ZNFX120WM SAR EVALUATION REPORT Quality Manager Test Dates: DUT Type: APPENDIX E: 07/15/19 - 07/24/19 Portable Handset Page 1 of 1 © 2019 PCTEST Engineering Laboratory, Inc. REV 21.3 M 02/15/2019


Document Created: 2019-08-26 19:27:45
Document Modified: 2019-08-26 19:27:45
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC