I19Z60741-SEM01_SAR_Rev0_part4

FCC ID: ZNFX120EMW

RF Exposure Info

Download: PDF
FCCID_4337813

3 l oo — 120C Measurement Conditions DASY system configuration, as far as not given on page 1. DASY Version DASY5 V52.10.1 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy, dz =5 mm Frequency 2600 MHz + 1 MHz Head TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 39.0 1.96 mho/m Measured Head TSL parameters (22.0 £0.2) °C 37.2 26 % 2.02 mho/m +6 % Head TSL temperature change during test <0.5 °C —— —— SAR result with Head TSL SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 250 mW input power 14.2 W/ikg SAR for nominal Head TSL parameters normalized to 1W 55.4 Wikg + 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 250 mW input power 6.33 W/kg SAR for nominal Head TSL parameters normalized to 1W 24.9 Wikg x 16.5 % (k=2) Body TSL parameters The following parameters and calculations were applied. . Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 52.5 2.16 mho/m Measured Body TSL parameters (22.0 £0.2) °C 51.5 26 % 2.20 mho/m £ 6 % Body TSL temperature change during test <0.5 °C =— SAR result with Body TSL SAR averaged over 1 cm‘ (1 g) of Body TSL Condition SAR measured 250 mW input power 13.7 W/kg SAR for nominal Body TSL parameters normalized to 1W 54.1 Wikg #17.0 % (k=2) SAR averaged over 10 em* (10 g) of Body TSL condition SAR measured 250 mW input power 6.17 Wikg SAR for nominal Body TSL parameters normalized to 1W 24.5 Wikg # 16.5 % (k=2) Certificate No: D2600V2—1012_Jul18 Page 3 of 8

Appendix (Additional assessments outside the scope of SCS 01 08) Antenna Parameters with Head TSL Impedance, transformed to feed point 474 Q —7.4 jQ Return Loss —21.9 dB Antenna Parameters with Body TSL Impedance, transformed to feed point 44.1 Q — 4.9 jQ Return Loss —21.8 dB General Antenna Parameters and Design Electrical Delay (one direction) 1.154 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Manufactured on October 30, 2007 Certificate No: D2600V2—1012_Jul18 Page 4 of 8

m_ /7/ y C DASY5 Validation Report for Head TSL Date: 26.07.2018 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 2600 MHz; Type: D2600V2; Serial: D2600V2 — SN:1012 Communication System: UID 0 — CW; Frequency: 2600 MHz Medium parameters used: f = 2600 MHz; 0 = 2.02 $/m; & = 37.2; p = 1000 kg/m* Phantom section: Flat Section Measurement Standard: DASYS (IEEE/IEC/ANSI C63.19—2011) DASY52 Configuration: e Probe: EX3DV4 — SN7349; ConvF(7.7, 7.7, 7.7) @ 2600 MHz; Calibrated: 30.12.2017 e Sensor—Surface: 1.4mm (Mechanical Surface Detection) e Electronics: DAE4 Sn601; Calibrated: 26.10.2017 e Phantom: Flat Phantom 5.0 (front); Type: QD 000 P50 AA; Serial: 1001 * DASY52 52.10.1(1476); SEMCAD X 14.6.11(7439) Dipole Calibration for Head Tissue/Pin=250 mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 118.3 V/m; Power Drift = —0.04 dB Peak SAR (extrapolated) = 28.3 W/kg SAR(1 g) = 14.2 W/kg; SAR(10 g) = 6.33 W/kg Maximum value of SAR (measured) = 23.7 W/kg dB 0 —5.20 —10.40 —15.60 —20.80 —26.00 0 dB = 23.7 W/kg = 13.75 dBW/kg Certificate No: D2600V2—1012_Jul18 Page 5 of 8

Impedance Measurement Plot for Head TSL File View Channel Sweep Calibration Trace Scale Marker System Window Help 2600000 GHz 47.371 Q 8.2358 pF —7.4326 Q , 2600000 GHz 80.734 mU ~105.12 ° Ch1Avg= 20 Ch1: Start 2.40000 GHz —— Stop 2.90000 GHz —2).859 dB 0 Ch = Ch1: Start 2.40000 GHa ——— Stop 2.20000 GHz Status CH 1: 511 ac C* 1—Port Avg=20 Delay LCL Certificate No: D2600V2—1012_Jul18 Page 6 of 8

m* /7/ y C DASY5 Validation Report for Body TSL Date: 26.07.2018 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 2600 MHz; Type: D2600V2; Serial: D2600V2 — SN:1012 Communication System: UID 0 — CW; Frequency: 2600 MHz Medium parameters used: f = 2600 MHz; 0 = 2.2 S/m; & = 51.5; p = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASYS (IEEE/IEC/ANSI C63.19—2011) DASY52 Configuration: e Probe: EX3DV4 — SN7349; ConvF(7.81, 7.81, 7.81) @ 2600 MHz; Calibrated: 30.12.2017 e Sensor—Surface: 1.4mm (Mechanical Surface Detection) e Electronics: DAE4 Sn601; Calibrated: 26.10.2017 e Phantom: Flat Phantom 5.0 (back); Type: QD 000 P50 AA; Serial: 1002 e DASY52 52.10.1(1476); SEMCAD X 14.6.11(7439) Dipole Calibration for Body Tissue/Pin=250 mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 107.5 V/m; Power Drift = —0.07 dB Peak SAR (extrapolated) = 27.7 W/kg SAR(I g) = 13.7 W/kg; SAR(10 g) = 6.17 W/kg Maximum value of SAR (measured) = 22.6 W/kg dB 0 —5.20 —10.40 —15.60 —20.80 —26.00 0 dB = 22.6 W/kg = 13.54 dBW/kg Certificate No: D2600V2—1012_Jul18 Page 7 of 8

(ISI,° Impedance Measurement Plot for Body TSL File View Channel Sweep Calibration Trace Scale Marker System Window Help 2600000 GHz 44.132 O 12.374 pF —4.9469 C y 2600000 GHz 81.418 mU —136.86 ° Ch1Avg= 20 Ch1: Start 2.40000 GHz —— Stop 2.80000 GHz 00 000 GHz —21.786 dB 00 0.00 00 Ch1 Ch1: Start 2. Stop 2.90000 GHz Status CH 1: E11 | C" 1—Port Avg=20 Delay LCL Certificate No: D2600V2—1012_Jul18 Page 8 of 8

No. I19Z60741-SEM01 Page 146 of 146 ANNEX I Accreditation Certificate ©Copyright. All rights reserved byCTTL.


Document Created: 2019-06-27 14:15:34
Document Modified: 2019-06-27 14:15:34
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC