SAR Appendix F

FCC ID: ZNFW200V

RF Exposure Info

Download: PDF
FCCID_2770804

Calibration Laboratory of Schweizerischer Kalibrierdienst Schmid & Partner Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client UL CCS USA Certificate No: D2450V2-748_Feb1 5 CALIBRATION CERTIFICATE I Object D2450V2 — SN:748 Calibration procedure(s) QA CAL—O5.v9 Calibration procedure for dipole validation kits above 700 MHz Calibration date: February 20, 2015 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (Sl). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Power meter EPM—442A GB37480704 07—Oct—14 (No. 217—02020) Oct—15 Power sensor HP 8481A US37292783 07—Oct—14 (No. 217—02020) Oct—15 Power sensor HP 8481A Mmy41092317 07—Oct—14 (No. 217—02021) Oct—15 Reference 20 dB Attenuator SN: 5058 (20k) 03—Apr—14 (No. 217—01918) Apr—15 Type—N mismatch combination SN: 5047.2 / 06327 03—Apr—14 (No. 217—01921) Apr—15 Reference Probe ES3DV3 SN: 3205 30—Dec—14 (No. ES3—3205_Dec14) Dec—15 DAE4 SN: 601 18—Aug—14 (No. DAE4—601_Aug14) Aug—15 Secondary Standards ID # Check Date (in house) Scheduled Check RF generator R&S SMT—O6 100005 04—Aug—99 (in house check Oct—13) In house check: Oct—16 Network Analyzer HP 8753E US37390585 $4206 18—Oct—01 (in house check Oct—14) In house check: Oct—15 Name Function Calibrated by: Claudio Leubler Laboratory Technician Approved by: Katja Pokovic Technical Manager ce Issued: February 27, 2015 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: D2450V2—748_Feb15 Page 1 of 11

Calibration Laboratory of SR s$L\ZS/z S Schweizerischer Kalibrierdienst Schmid & Partner iiag\igé c Service suisse d‘étalonnage Engineering AG yy Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland */fi\\\v‘ S Swiss Calibration Service Alulubs® Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid Convr sensitivity in TSL / NORM x,y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) IEC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) for hand—held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)", February 2005 c) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Additional Documentation: d) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: * Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. * Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. e Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. * Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. e SAR measured: SAR measured at the stated antenna input power. * SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. e SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. Certificate No: D2450V2—748_Feb15 Page 2 of 11

Measurement Conditions DASY system configuration, as far as not given on page 1. DASY Version DASY5 V52.8.8 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy, dz =5.0 mm Frequency 2450 MHz + 1 MHz Head TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 39.2 1.80 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 38.2 +6 % 1.87 mho/m +6 % Head TSL temperature change during test <0.5 °C ———— SAR result with Head TSL SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 250 mW input power 13.5 W/kg SAR for nominal Head TSL parameters normalized to 1W 52.7 Wikg + 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 250 mW input power 6.23 Wi/kg SAR for nominal Head TSL parameters normalized to 1W 24.6 Wikg + 16.5 % (k=2) Body TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 52.7 1.95 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 51.7 +6 % 2.04 mho/m +6 % Body TSL temperature change during test <0.5 °C SAR result with Body TSL SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 250 mW input power 12.9 W/kg SAR for nominal Body TSL parameters normalized to 1W 50.3 Wikg + 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 250 mW input power 5.95 W/kg SAR for nominal Body TSL parameters normalized to 1W 23.5 Wikg + 16.5 % (k=2) Certificate No: D2450V2—748_Feb15 Page 3 of 11

Appendix (Additional assessments outside the scope of SCS 0108) Antenna Parameters with Head TSL Impedance, transformed to feed point 54.2 Q — 1.5 j|Q Return Loss — 27.4 dB Antenna Parameters with Body TSL Impedance, transformed to feed point 51.8 Q + 0.9 jQ Return Loss — 34.2 dB General Antenna Parameters and Design Electrical Delay (one direction) 1.154 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Manufactured on December 01, 2003 Certificate No: D2450V2—748_Feb15 Page 4 of 11

Appendix (Additional assessments outside the scope of SCS 0108) Measurement Conditions DASY system configuration, as far as not g iven on page 1 and 3. Phantom SAM Head Phantom SAR result with SAM Head (Top) SAR averaged over 1 cm* (i g) of Head TSL Condition SAR measured 250 mW input power 13.6 W/kg SAR for nominal Head TSL parameters normalized to 1W 55.6 Wi/kg + 17.5 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 250 mW input power 6.43 Wikg SAR for nominal Head TSL parameters normalized to 1W 26.1 W/ikg + 16.9 % (k=2) SAR result with SAM Head (Mouth) SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 250 mW input power 13.7 W/kg SAR for nominal Head TSL parameters normalized to 1W 56.0 Wi/kg + 17.5 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 250 mW input power 6.82 W/kg SAR for nominal Head TSL parameters normalized to 1W 27.6 Wikg + 16.9 % (k=2) SAR result with SAM Head (Neck) SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 250 mW input power 13.1 Wi/kg SAR for nominal Head TSL parameters normalized to 1W 53.5 Wikg + 17.5 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 250 mW input power 6.14 W/kg SAR for nominal Head TSL parameters normalized to 1W 24.9 Wikg + 16.9 % (k=2) SAR result with SAM Head (Ear) SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 250 mW input power 8.20 W/kg SAR for nominal Head TSL parameters normalized to 1W 33.5 W/kg + 17.5 % (k=2) SAR averaged over 10 cm‘ (10 g) of Head TSL condition SAR measured 250 mW input power 4.21 Wikg SAR for nominal Head TSL parameters normalized to 1W 17.1 Wikg + 16.9 % (k=2) Certificate No: D2450V2—748_Feb15 Page 5 of 11

DASY5 Validation Report for Head TSL Date: 18.02.2015 Test Laboratory: SPEAG, Zurich, Switzerland DUT : Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 — SN:748 Communication System: UID 0 — CW; Frequency: 2450 MHz Medium parameters used: f = 2450 MHz; 0 = 1.87 S/m; s, = 38.2; p = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19—2011) DASY52 Configuration: e Probe: ES3DV3 — SN3205; ConvF(4.54, 4.54, 4.54); Calibrated: 30.12.2014; e Sensor—Surface: 3mm (Mechanical Surface Detection) e Electronics: DAFE4 Sn601; Calibrated: 18.08.2014 e Phantom: Flat Phantom 5.0 (front); Type: QDOOOPS5OAA; Serial: 1001 e DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Dipole Calibration for Head Tissue /Pin=250 mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=>mm, dy=5mm, dz=>mm Reference Value = 100.5 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 28.0 W/kg SAR(1 g) = 13.5 W/kg; SAR(10 g) = 6.23 W/kg Maximum value of SAR (measured) = 17.5 W/kg —9.60 —14.40 —19.20 —24.00 0 dB = 17.5 W/kg = 12.43 dBW/kg Certificate No: D2450V2—748_Feb15 Page 6 of 11

Impedance Measurement Plot for Head TSL 18 Feb 2015 11:17:33 S11i 1 U FS 1: 54.156 & —1.5254 a 42.587 pF 2 450.000 00M MHz puprant Del CA Av :!.E-s H1d CH2 CA Av 16 H1d START 2 250.000 900 MHz STOP 2 650.000 900 MHz Certificate No: D2450V2—748_Feb15 Page 7 of 11

DASY5 Validation Report for Body TSL Date: 18.02.2015 Test Laboratory: SPEAG, Zurich, Switzerland DUT : Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 — SN:748 Communication System: UID 0 — CW; Frequency: 2450 MHz Medium parameters used: f = 2450 MHz; 0 = 2.04 S/m; s = 51.7; p = 1000 kg/rn3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19—2011) DASY52 Configuration: e Probe: ES3DV3 — SN3205; ConvF(4.32, 4.32, 4.32); Calibrated: 30.12.2014; »a Sensor—Surface: 3mm (Mechanical Surface Detection) e Electronics: DAE4 Sn601; Calibrated: 18.08.2014 e Phantom: Flat Phantom 5.0 (back); Type: QDOOOP5OAA; Serial: 1002 e DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Dipole Calibration for Body Tissue /Pin=250 mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=>mm, dz=5mm Reference Value = 93.66 V/m; Power Drift = 0.07 dB Peak SAR (extrapolated) = 27.0 W/kg SAR(1 g) = 12.9 W/kg; SAR(10 g) = 5.95 W/kg Maximum value of SAR (measured) = 17.0 W/kg —8.00 —12.00 —16.00 —20.00 0 dB = 17.0 W/kg = 12.30 dBW/kg Certificate No: D2450V2—748_Febi5 Page 8 of 11

Impedance Measurement Plot for Body TSL 18 Feb 2015 11:17:}04 (CHZ sii i U FS 1: 51.752 6 99180 & $9.632 pH 2 459.000 odd MHz Del AV 169 H1 d CH2 Ca Ais 16° H1d START 2 2590.000 @00 MHz STOP 2 6£50.000 ono MHz Certificate No: D2450V2—748_Feb15 Page 9 of 11

DASY5 Validation Report for SAM Head Date: 20.02.2015 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 2450 MHz; Type: D2450V2; Serial:; D2450V2 — SN:748 Communication System: UID 0 — CW; Frequency: 2450 MHz Medium parameters used: f = 2450 MHz; 0 = 1.75 S/m; s = 40.6; p = 1000 kg/m3 Measurement Standard: DASY5 (IEEE/IEC/ANSI C€63.19—2011) DASY52 Configuration: + Probe: ES3DV3 — SN3205; ConvF(4.54, 4.54, 4.54); Calibrated: 30.12.2014; e Sensor—Surface: 3mm (Mechanical Surface Detection) s Electronics: DAFE4 Sn601; Calibrated: 18.08.2014 + Phantom: SAM Head e DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) SAM Head/Top/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 103.9 V/m; Power Drift = —0.04 dB Peak SAR (extrapolated) = 26.1 W/kg SAR(1 g) = 13.6 W/kg; SAR(10 g) = 6.43 W/kg Maximum value of SAR (measured) = 17.6 W/kg SAM Head/Mouth/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 104.0 V/m; Power Drift = —0.02 dB Peak SAR (extrapolated) = 25.8 W/kg SAR(I g) = 13.7 W/kg; SAR(10 g) = 6.82 W/kg Maximum value of SAR (measured) = 17.0 W/kg SAM Head/Neck/Zoom Scan (7x7x7)/Cube 0; Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 101.7 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 24.7 W/kg SAR(1 g) =13.1 W/kg; SAR(10 g) = 6.14 W/kg SAM Head/Ear/Zoom Scan (7x7x7)/Cube 0; Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 80.17 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 14.7 W/kg SAR(1 g) = 8.2 W/kg; SAR(10 g) = 4.21 W/kg Maximum value of SAR (measured) = 10.3 W/kg Certificate No: D2450V2—748_Feb15 Page 10 of 11

dB —2.00 —4.00 —6.00 —10.00 0 dB = 17.6 W/kg = 12.46 dBW/kg Certificate No: D2450V2—748_Feb15 Page 11 of 11

Calibration Laboratory of NR\ /7 S Schweizerischer Kalibrierdienst a 3 es Schmid & Partner m C Service suisse d‘étalonnage Engmeermg AG o Servizio svizzero di taratura , z S Zeughausstrasse 43, 8004 Zurich, Switzerland 2] w S Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client ULECCS! USA Certificate No: D7Z50V3—1 024_May1 5 CALIBRATION CERTIFICATE | Object C750V3 — SN: 1024 Calibration procedure(s) QA CAL—O5.v9 Calibration procedure for dipole validation kits above 700 MHz Calibration date: May 12, 2015 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (Sl). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Power meter EPM—442A GB37480704 07—Oct—14 (No. 217—02020) Oct—15 Power sensor HP 8481A US37292783 07—Oct—14 (No. 217—02020) Oct—15 Power sensor HP 8481A MY41092317 07—Oct—14 (No. 217—02021) Oct—15 Reference 20 dB Attenuator SN: 5058 (20k) 01—Apr—15 (No. 217—02131) Mar—16 Type—N mismatch combination SN: 5047.2 / 06327 01—Apr—15 (No. 217—02134) Mar—16 Reference Probe ES3DV3 SN: 3205 30—Dec—14 (No. ES3—3205_Dec14) Dec—15 DAE4 SN: 601 18—Aug—14 (No. DAE4—601_Aug14) Aug—15 Secondary Standards ID # Check Date (in house) Scheduled Check RF generator R&S SMT—O6 100005 04—Aug—99 (in house check Oct—13) In house check: Oct—16 Network Analyzer HP 8753E US37390585 $4206 18—0ct—01 (in house check Oct—14) In house check: Oct—15 Name Function Signature Calibrated by: Michae! Weber Laboratory Technician MleLle Approved by: Katia Pokovic Technical Manager Z2@// Issued: May 13, 2015 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: D750V3—1024_May15 Page 1 of 8

Calibration : Laboratory ; of \\\\\\&'/"//'7,,/ si//s S Schweizerischer Kalibrierdienst Schmid & Partner i‘lfis—/m c Service suisse d‘étalonnage Engineering AG stt Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland C////_\\\\\\\* S Swiss Calibration Service Alululs® Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid ConvrF sensitivity in TSL / NORM x,y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) 1EC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) for hand—held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)", February 2005 c) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Additional Documentation: d) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: * Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. * Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. * Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. *« Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. e SAR measured: SAR measured at the stated antenna input power. a SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. * SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. Certificate No: D750V3—1024_May15 Page 2 of 8

Measurement Conditions DASY system configuration, as far as not iven on page 1. DASY Version DASY5 V52.8.8 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom Distance Dipole Center — TSL 15 mm with Spacer Zoom Scan Resolution dx, dy, dz =5 mm Frequency 750 MHz + 1 MHz Head TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 41.9 0.89 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 42.2 +6 % 0.90 mho/m + 6 % Head TSL temperature change during test <0.5 °C g*—« ———— SAR result with Head TSL SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 250 mW input power 2.04 Wi/kg SAR for nominal Head TSL parameters normalized to 1W 8.10 W/kg + 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 250 mW input power 1.34 Wikg SAR for nominal Head TSL parameters normalized to 1W 5.33 Wikg + 16.5 % (k=2) Body TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 55.5 0.96 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 55.4 + 6 % 0.97 mho/m + 6 % Body TSL temperature change during test <0.5 °C ———— SAR result with Body TSL SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 250 mW input power 2.12 W/kg SAR for nominal Body TSL parameters normalized to 1W 8.41 Wi/kg + 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 250 mW input power 1.41 Wi/ikg SAR for nominal Body TSL parameters normalized to 1W 5.60 W/kg + 16.5 % (k=2) Certificate No: D750V3—1024_May15 Page 3 of 8

Appendix (Additional assessments outside the scope of SCS 0108) Antenna Parameters with Head TSL Impedance, transformed to feed point 53.8 Q — 0.2 jQ Return Loss — 28.8 dB Antenna Parameters with Body TSL Impedance, transformed to feed point 50.6 Q — 1.3 jQ Return Loss — 37.1 dB General Antenna Parameters and Design Electrical Delay (one direction) 1.011 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Manufactured on February 03, 2011 Certificate No: D750V3—1024_May15 Page 4 of 8

DASY5 Validation Report for Head TSL Date: 12.05.2015 Test Laboratory: SPEAG, Zurich, Switzerland DUT : Dipole 750 MHz; Type: D750V3; Serial: D750V3 — SN: 1024 Communication System: UID 0 — CW; Frequency: 750 MHz Medium parameters used: f = 750 MHz; 0 = 0.9 S/m; s, = 42.2; p = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C€63.19—2011) DASY52 Configuration: «_ Probe: ES3DV3 — SN3205; ConvF(6.44, 6.44, 6.44); Calibrated: 30.12.2014; e Sensor—Surface: 3mm (Mechanical Surface Detection) e Electronics: DAE4 Sn601; Calibrated: 18.08.2014 * Phantom: Flat Phantom 4.9L; Type: QDOOOP49AA; Serial: 1001 »_— DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Dipole Calibration for Head Tissue/Pin=250 mW, d=15mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 53.18 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 3.02 W/kg SAR(1 g) = 2.04 W/kg; SAR(10 g) = 1.34 W/kg Maximum value of SAR (measured) = 2.39 W/kg dB 0 —2.40 —4.80 —7.20 —9.60 —12.00 0 dB = 2.39 W/kg = 3.78 dBW/kg Certificate No: D750V3—1024_May15 Page 5 of 8

Impedance Measurement Plot for Head TSL 12 May 2015 11:35:56 S41 1 UOFS 1: 53.775 & —173.83 me 1.2208 nF 759.000 000 MHz _— Del C& Avgq 16 H1d CH2 Del CA Aw 159 H1d START 550.0900 000 MHz STOP 950.000 000 MHz Certificate No: D750V3—1024_May15 Page 6 of 8

DASY5 Validation Report for Body TSL Date: 12.05.2015 Test Laboratory: SPEAG, Zurich, Switzerland DUT : Dipole 750 MHz; Type: D750V3; Serial: D750V3 — SN: 1024 Communication System: UID 0 — CW; Frequency: 750 MHz Medium parameters used: f = 750 MHz; 0 = 0.97 S/m; s = 55.4; p = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C€63.19—2011) DASY52 Configuration: ®@ Probe: ES3DV3 — SN3205; ConvF(6.21, 6.21, 6.21); Calibrated: 30.12.2014; Sensor—Surface: 3mm (Mechanical Surface Detection) Electronics: DAE4 Sn601; Calibrated: 18.08.2014 Phantom: Flat Phantom 4.9L; Type: QDOOOP49AA; Serial: 1001 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Dipole Calibration for Body Tissue/Pin=250 mW, d=15mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 52.17 V/m; Power Drift = —0.01 dB Peak SAR (extrapolated) = 3.06 W/kg SAR(1 g) = 2.12 W/kg; SAR(10 g) = 1.41 W/kg Maximum value of SAR (measured) = 2.46 W/kg dB 0 —2.40 —4.80 —f.20 —9.60 —12.00 0 dB = 2.46 W/kg = 3.91 dBW/kg Certificate No: D750V3—1024_May15 Page 7 of 8

Impedance Measurement Plot for Body TSL 12 May 2015 10:27:59 CHBT s1i1i 1 U FS 1: 50.598 a —1.2656 a 167.67 pF 758.000 0Bo MHz De 1 CA A¥q 16 H1d CH2 De l CA Ay 158 H1d START 550.000 009 MHz STOP 950.000 0ag MHz Certificate No: D750V3—1024_May15 Page 8 of 8


Document Created: 2015-09-28 19:56:26
Document Modified: 2015-09-28 19:56:26
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC