16I22629-S1V1 SAR_App F Dipole Cal. Certs

FCC ID: ZNFVC200

RF Exposure Info

Download: PDF
FCCID_2901624

Calibration Laboratory of Schweizerischer Kalibrierdienst S Schmid & Partner ifi:\y’/{% C Service suisse d‘étalonnage Engineering AG e Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland +7///\\\\\\? S Swiss Calibration Service Anluls® Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client UL CCS USA Certificate No: D835V2—4d142_Sep15/2 CALIBRATION CERTIFICATE (Replacement of No: D835V2—4d142_Sep15) Object D835V2 — SN: 4d142 Calibration procedure(s) QA CAL—O5.v9 Calibration procedure for dipole validation kits above 700 MHz Calibration date: September 23, 2015 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Power meter EPM—442A GB37480704 07—Oct—15 (No. 217—02222) Oct—16 Power sensor HP 8481A US37292783 07—Oct—15 (No. 217—02222) Oct—16 Power sensor HP 8481A MY41092317 07—Oct—15 (No. 217—02223) Oct—16 Reference 20 dB Attenuator SN: 5058 (20k) 01—Apr—15 (No. 217—02131) Mar—16 Type—N mismatch combination SN: 5047.2 / 06327 01—Apr—15 (No. 217—02134) Mar—16 Reference Probe EX3DV4 SN: 7349 30—Dec—14 (No. EX3—7349_Dec14) Dec—15 DAE4 SN: 601 17—Aug—15 (No. DAE4—601_Aug15) Aug—16 Secondary Standards ID # Check Date (in house) Scheduled Check RF generator R&S SMT—O6 100972 15—Jun—15 (in house check Jun—15) In house check: Jun—18 Network Analyzer HP 8753E US37390585 $4206 18—Oct—01 (in house check Oct—15) In house check: Oct—16 Name Function Signature Calibrated by: Laboratory Technician 4@47 Israe Elnaouq Approved by: Katja Pokovic Technical Manager /K/@— Issued: November 13, 2015 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: D835V2—4d142_Sep15/2 Page 1 of 11

* % is nlu 1 Calibration Laboratory of . s\\\“\\\\_/;/2o S Schweizerischer Kalibrierdienst Schmid & Partner i‘&fi/fi c Service suisse d‘étalonnage Engineering AG 7 /R > Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland *4///_\\\\x‘ S swiss Calibration Service Alululs® Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSE tissue simulating liquid ConvrF sensitivity in TSL / NORM x.y,2 N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) 1EC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) for hand—held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)", February 2005 c) 1EC 62209—2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)", March 2010 d) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Additional Documentation: e) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: * Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. e Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. * Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. e Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. * SAR measured: SAR measured at the stated antenna input power. e SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. » SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. Certificate No: D835V2—4d142_Sep15/2 Page 2 of 11

Measurement Conditions DASY system configuration, as far as not iven on page 1. DASY Version DASY5 V52.8.8 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom Distance Dipole Center — TSL 15 mm with Spacer Zoom Scan Resolution dx, dy, dz =5.0 mm Frequency 835 MHz + 1 MHz Head TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 41.5 0.90 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 41.8 +6 % 0.94 mho/m + 6 % Head TSL temperature change during test <0.5 °C ———— SAR result with Head TSL SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 250 mW input power 2.39 W/kg SAR for nominal Head TSL parameters normalized to 1W 9.27 Wikg 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 250 mW input power 1.54 W/kg SAR for nominal Head TSL parameters normalized to 1W 6.01 W/ikg + 16.5 %(k=2) Body TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 55.2 0.97 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 53.8 #£6 % 1.00 mho/m +6 % Body TSL temperature change during test <0.5 °C ———— _——— SAR result with Body TSL SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 250 mW input power 2.42 Wikg SAR for nominal Body TSL parameters normalized to 1W 9.41 Wikg + 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 250 mW input power 1.58 W/kg SAR for nominal Body TSL parameters normalized to 1W 6.18 Wikg + 16.5 % (k=2) Certificate No: D835V2—4d142_Sep15/2 Page 3 of 11

Appendix (Additional assessments outside the scope of SCS 0108) Antenna Parameters with Head TSL Impedance, transformed to feed point 52.4 O — 3.3 jQ Return Loss — 27.9 dB Antenna Parameters with Body TSL Impedance, transformed to feed point 47.8 0 — 5.9 jQ Return Loss — 23.8 dB General Anterna Parameters and Design Electrical Delay (one direction) 1.392 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. On some of the dipoltes, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Manufactured on March 27, 2012 Certificate No: D835V2—4d142_Sep15/2 Page 4 of 11

Appendix (Additional assessments outside the scope of SCS 0108) Measurement Corditions DASY system configuration, as far as not given on page 1 and 3. Phantom SAM Head Phantom For usage with cSAR3DV1—R/L SAR result with SAM Head (Top) SAR averaged over 1 em* (1 g) of Head TSL Condition SAR measured 250 mW input power 2.28 W/ikg SAR for nominal Head TSL parameters normalized to 1W 8.86 Wikg + 17.5 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 250 mW input power 1.49 Wikg SAR for nominal Head TSL parameters normalized to 1W 5.82 Wi/kg + 16.9 % (k=2) SAR result with SAM Head (Mouth) SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 250 mW input power 2.42 Wikg SAR for nominal Head TSL parameters normalized to 1W 9.41 Wikg * 17.5 % (k=2) SAR averaged over 10 em* (10 g) of Head TSL condition SAR measured 250 mW input power 1.61 W/kg SAR for nominal Head TSL parameters normalized to 1W 6.29 Wi/kg + 16.9 % (k=2) SAR result with SAM Head (Neck) SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 250 mW input power 2.38 W/kg SAR for nominal Head TSL parameters normalized to 1W 9.25 Wi/kg * 17.5 % (k=2) SAR averaged over 10 cm* (10 9 of Head TSL condition SAR measured 250 mW input power 1.60 W/kg SAR for nominal Head TSL parameters normalized to 1W 6.25 Wi/kg + 16.9 % (k=2) SAR result with SAM Head (Ear) SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 250 mW input power 1.97 Wikg SAR for nominal Head TSL parameters normalized to 1W 7.66 Wikg + 17.5 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 250 mW input power 1.31 W/ikg SAR for nominal Head TSL parameters normalized to 1W 5.12 W/kg + 16.9 % (k=2) Certificate No: D835V2—4d142_Sep15/2 Page 5 of 11

DASY5 Validation Report for Head TSL Date: 17.09.2015 Test Laboratory: SPEAG Lab2 DUT: Dipole 835 MHz; Type: D835V2; Serial: D835V2 — SN: 4d142 Communication System: UID 0 — CW; Frequency: 835 MHz Medium parameters used: f = 835 MHz; 0 = 0.94 S/m; s = 41.8; p = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C€63.19—2011) DASY52 Configuration: * Probe: EX3DV4 — SN7349; ConvF(9.77, 9.77, 9.77); Calibrated: 30.12.2014; «_ Sensor—Surface: 1.4mm (Mechanical Surface Detection) e Electronics: DAE4 Sn601; Calibrated: 17.08.2015 *« Phantom: Flat Phantom 4.9L; Type: QDOOOP49AA; Serial: 1001 + DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Dipole Calibration for Head Tissue/Pin=250 mW, d=15mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 61.58 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 3.59 W/kg SAR(1 g) = 2.39 W/kg; SAR(10 g) = 1.54 W/kg Maximum value of SAR (measured) = 3.20 W/kg —4.40 —6.60 —11.00 0 dB = 3.20 W/kg = 5.05 dBW/kg Certificate No: D835V2—4d142_Sep15/2 Page 6 of 11

Impedance Measurement Plot for Head TSL 14 Sep 2015 15:33:52 §14100 i U FS Pr52.414 a —3.3145 0 57.507 pF 835.000 Ad0 MHz Del C&A Avg 16 H1d CH2 Del CA Av 16° H1d START 635.000 900 MHz STOP 1 035.000 069 MHz Certificate No: D835V2—4d142_Sep15/2 Page 7 of 11

DASY5 Validation Report for Body TSL Date: 14.09.2015 Test Laboratory: SPEAG Lab2 DUT : Dipole 835 MHz; Type: D835V2; Serial: D835V2 — SN: 4d142 Communication System: UID 0 — CW; Frequency: 835 MHz Medium parameters used: £ = 835 MHz; 0 = 1 S/m; s = 53.8; p = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C€63.19—2011) DASY52 Configuration: «_ Probe: EX3DV4 — SN7349; ConvF(9.72, 9.72, 9.72); Calibrated: 30.12.2014; e Sensor—Surface: 1.4mm (Mechanical Surface Detection) » Electronics: DAF4 Sn601; Calibrated: 17.08.2015 *« Phantom: Flat Phantom 4.9L; Type: QDOOOPA49AA; Serial: 1001 + DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Dipole Calibration for Body Tissue/Pin=250 mW, d=15mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 59.76 V/m; Power Drift = 0.00 dB Peak SAR (extrapolated) = 3.62 W/kg SAR(1 g) = 2.42 W/kg; SAR(10 g) = 1.58 W/kg Maximum value of SAR (measured) = 3.21 W/kg —2.20 —4.40 —6.60 —8.80 ~11.00 0 dB = 3.21 W/kg = 5.07 dBW/kg Certificate No: D835V2—4d142_Sep15/2 Page 8 of 11

Impedance Measurement Plot for Body TSL 14 Sep 2015 11109157 S11 1 U OFS 1i 47.766 a —5.8809 a 32.411 pF 835.000 00d MHz ul ~ Al 3 se 2 J8, * * 4 e 0 . Del [ _‘y~f x \ NX us t0s\~o\ 71— ~ 0 * C& [ 4C 8 ut3 a & s Avg 16 H1d CH2 Del CA Av 159 H1d START 635,.000 00# MHz STOP1 035.000 0DD MHz Certificate No: D835V2—4d142_Sep15/2 Page 9 of 11

DASY5 Validation Report for SAM Head Date: 23.09.2015 Test Laboratory: SPEAG, Zurich, Switzerland DUT : Dipole 835 MHz; Type: D835V2; Serial: D835V2 — SN: 4d142 Communication System: UID 0 — CW; Frequency: 835 MHz Medium parameters used: f = 835 MHz; 0 = 0.95 S/m; s = 43.9; p = 1000 kg/m3 Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19—2011) DASY52 Configuration: e Probe: EX3DV4 — SN7349; ConvF(9.77, 9.77, 9.77); Calibrated: 30.12.2014; a Sensor—Surface; 1.4mm (Mechanical Surface Detection) » Electronics: DAF4 Sn601; Calibrated: 17.08.2015 s Phantom: SAM Head s DASY52 52.8.8(1222);, SEMCAD X 14.6.10(7331) SAM Head/Top/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 59.97 V/m; Power Drift = —0.02 dB Peak SAR (extrapolated) = 3.40 W/kg SAR(1 g) = 2.28 W/kg; SAR(10 g) = 1.49 W/kg Maximum value of SAR (measured) = 3.03 W/kg SAM Head/Mouth/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 60.40 V/m; Power Drift = —0.01 dB Peak SAR (extrapolated) = 3.54 W/kg SAR(1 g) = 2.42 W/kg; SAR(10 g) = 1.61 W/kg Maximum value of SAR (measured) = 3.12 W/kg SAM Head/Neck/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 60.03 V/m; Power Drift = —0.03 dB Peak SAR (extrapolated) = 3.41 W/kg SAR(1 g) = 2.38 W/kg; SAR(10 g) = 1.6 W/kg Maximum value of SAR (measured) = 3.09 W/kg SAM Head/Ear/Zcom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 54.19 V/m; Power Drift = —0.01 dB Peak SAR (extrapolated) = 2.82 W/kg SAR(1 g) = 1.97 W/kg; SAR(10 g) = 1.31 W/kg Maximum value of SAR (measured) = 2.53 W/kg Certificate No: D835V2—4d142_Sep15/2 Page 10 of 11

—1.00 —2.00 —3.00 —4.00 —5.00 0 dB = 3.03 W/kg =4.81 dBW/kg Certificate No: D835V2—4d142_Sep15/2 Page 11 of 11

Schmid & Partner Engineering AG s p_ e a g Zeughausstrasse 43, 8004 Zurich, Switzerland Phone +41 44 245 9700, Fax +41 44 245 9779 info@speag.com, http://www.speag.com REPLACEMENT FOR C Probe calibration certificate(s) C Probe configuration file(s) [g/Dipole calibration certificate(s) C AE calibration certificate(s) C DAE configuration file(s) Dear Customer, Enclosed please find the replacement document (and diskette if applicable) for the marked item(s). All those customers receiving a probe(s) or DAE(s) replacement configuration file(s) must replace their current configuration file(s) with the new one(s). In addition, please send back to us, destroy or declare obsolete the old probe(s) or DAE(s) certificates at your earliest convenience. All those customers receiving a replacement dipole certificate(s) are kindly asked to send back to us, destroy or declare obsolete the old dipole certificate at your earliest convenience. We would like to greatly apologize for this situation and all circumstances you may have been caused. We will continuously improve our internal quality assurance to avoid reoccurrence of similar difficulties in the future. Best regards s p__C @2 f# Schmid & Partner Engineenrg AG Zeughausstrasse 43, 8004 Zurich, Switzerland Phone +41 44 245 9700, Fax +41 44 245 9779 info@speag.com, http:}www.speag.com Schmid & Partner Engineering AG Technical Note 14.04.05—1 June 2010

Calibration Laboratory of wha /z S Schweizerischer Kalibrierdienst Schmid & Partner in C Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland S Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client UL CCS USA Certificate No: D1900V2—5d163_Sep15 CALIBRATION CERTIFICATE Object D1900V2 — SN: 5d163 Calibration procedure(s) QA CAL—O5.v9 Calibration procedure for dipole validation kits above 700 MHz Calibration date: September 21, 2015 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (St). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. Alt calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Power meter EPM—442A GB37480704 07—Oct—14 (No. 217—02020) Oct—15 Power sensor HP 8481A US37292783 07—Oct—14 (No. 217—02020) Oct—15 Power sensor HP 8481A MY41092317 07—Oct—14 (No. 217—02021) Oct—15 Reference 20 dB Attenuator SN: 5058 (20k) 01—Apr—15 (No. 217—02131) Mar—16 Type—N mismatch combination SN: 5047.2 / 06327 01—Apr—15 (No. 217—02134) Mar—16 Reference Probe EX38DV4 SN: 7349 30—Dec—14 (No. EX3—7349_Dec14) Dec—15 DAE4 SN: 601 17—Aug—15 (No. DAE4—601_Aug15) Aug—16 Secondary Standards ID # Check Date (in house) Scheduled Check RF generator R&S SMT—O6 100972 15—Jun—15 (in house check Jun—15) In house check: Jun—18 Network Analyzer HP 8753E US37390585 $4206 18—Oct—01 (in house check Oct—14) In house check: Oct—15 Wikier Name Function Signature Calibrated by: Michael Weber Laboratory Technician Approved by: Katja Pokovic Technical Manager yeszts Issued: September 23, 2015 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: D1900V2—5d163_Sep15 Page 1 of 8

& E w tm Cahbratlon Laborator ¥ of S\\\\\\__'////,/’; S e in Schweizerischer Kalibrierdienst Schmid & Partner im c Service suisse d‘étalonnage Engineering AG 2A e Servizio svizzero di taratura i o Zeughausstrasse 43, 8004 Zurich, Switzerland ze P o S o T pan . Swiss Calibration Service Alulats® Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid ConvF sensitivity in TSL / NORM x,y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) IEC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) for hand—held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)", February 2005 c) 1EC 62209—2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)", March 2010 d) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Additional Documentation: e) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. SAR measured: SAR measured at the stated antenna input power. SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. Certificate No: D1900V2—5d163_Sep15 Page 2 of 8

Measurement Conditions DASY system contfiguration, as far as not given on page 1. DASY Version DASY5 V52.8.8 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy, dz =5 mm Frequency 1900 MHz + 1 MHz Head TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 40.0 1.40 mho/m Measured Head TSL parameters (22.0 £ 0.2) °C 39.3 + 6 % 1.38 mho/m + 6 % Head TSL temperature change during test <0.5 °C ———— ———— SAR result with Head TSL SAR averaged over 1 cm® (1 g) of Head TSL Condition SAR measured 250 mW input power 9.99 W/kg SAR for nominal Head TSL parameters normalized to 1W 40.1 W/kg + 17.0 %(k=2) SAR averaged over 10 cm® (10 g) of Head TSL condition SAR measured 250 mW input power 5.24 Wikg SAR for nominal Head TSL parameters normalized to 1W 21.0 W/ikg + 16.5 % (k=2) Body TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 53.3 1.52 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 52.6 £ 6 % 1.52 mho/m + 6 % Body TSL temperature change during test <0.5 °C =——— ———— SAR result with Body TSL SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 250 mW input power 10.0 W/kg SAR for nominal Body TSL parameters normalized to 1W 39.9 W/kg + 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 250 mW input power 5.27 Wikg SAR for nominal Body TSL parameters normalized to 1W 21.0 W/kg + 16.5 % (k=2) Certificate No: D1900V2—5d163_Sep15 Page 3 of 8

Appendix (Additional assessments outside the scope of SCS 0108) Antenna Parameters with Head TSL Impedance, transformed to feed point 53.8 Q + 4.8 jQ Return Loss — 24.6 dB Antenna Parameters with Body TSL Impedance, transformed to feed point 50.4 Q + 5.8 |Q Return Loss — 24.7 dB General Antenna Parameters and Design Electrical Delay (one direction) 1.199 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Manufactured on December 20, 2011 Certificate No: D1900V2—5d163_Sep15 Page 4 of 8

DASY5 Validation Report for Head TSL Date: 21.09.2015 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 1900 MHz; Type: D1900V2; Serial: D1900V2 — SN: 5d163 Communication System: UID 0 — CW; Frequency: 1900 MHz Medium parameters used: f = 1900 MHz; o = 1.38 S/m; & = 39.3; p = 1000 kg/m> Phantom section: Flat Section Measurement Standard: DASYS5 (IEEE/IEC/ANSI C€63.19—2011) DASY52 Configuration: e Probe: EX3DV4 — SN7349; ConvF(8.14, 8.14, 8.14); Calibrated: 30.12.2014; Sensor—Surface: 1.4mm (Mechanical Surface Detection) Electronics: DAE4 Sn601; Calibrated: 17.08.2015 Phantom: Flat Phantom 5.0 (front); Type: QDOOOP5OAA; Serial: 1001 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Dipole Calibration for Head Tissue/Pin=250 mW, d=1{mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 109.6 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 18.7 W/kg SAR(1 g) = 9.99 W/kg; SAR(10 g) = 5.24 W/kg Maximum value of SAR (measured) = 15.6 W/kg dB —3.80 —f.60 —11.40 —15.20 —19.00 0 dB = 15.6 W/ikg = 11.93 dBW/kg Certificate No: D1900V2—5d163_Sep15 Page 5 of 8

Impedance Measurement Plot for Head TSL 21 Sep 2015 12:04:11 $441 1 U FS 1: 53.834 t 4.7676 a 399.36 pH 1 9090.000 afe MHz Cel C& A¥v :I.E;El H1 d CH2 De l CA Aw 16 2 H1d START 1 700.000 000 MHz STOP 2 1090.000 902 MHz Certificate No: D1900V2—5d163_Sep15 Page 6 of 8

DASY5 Validation Report for Body TSL Date: 21.09.2015 Test Laboratory: SPEAG, Zurich, Switzerland DUT : Hipole 1900 MHz; Type: D1900V2; Serial: D1900V2 — SN: 50163 Communication System: UID 0 — CW; Frequency: 1900 MHz Medium parameters used: £= 1900 MHz; 0 = 1.52 S/m; & = 52.6; p = 1000 kg/rn3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI €63.19—2011) DASY52 Configuration: «_ Probe: EX3DV4 — SN7349; ConvF(7.9, 7.9, 7.9); Calibrated: 30.12.2014; Sensor—Surface: 1.4mm (Mechanical Surface Detection) Electronics: DAE4 S$n601; Calibrated: 17.08.2015 tw Phantom: Flat Phantom 5.0 (back); Type: QDOOOP50OAA; Serial: 1002 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Dipole Calibration for Body Tissue/Pin=250 mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 104.7 V/m; Power Drift = —0.00 dB Peak SAR (extrapolated) = 18.1 W/kg SAR(1 g) = 10 W/kg; SAR(10 g) = 5.27 W/kg Maximum value of SAR (measured) = 15.3 W/kg —3.80 —£.60 —11.40 —15.20 —19.00 0 dB = 15.3 W/kg = 11.85 dBW/kg Certificate No: D1900V2—5d163_Sep15 Page 7 of 8

Impedance Measurement Plot for Body TSL 741 Sep 2015 12503149 CHI) s11 1 UOFS 1: 5B.41i6 a 5.7988 6 485.74 pH 1 909.000 900 MHz Ce l C& Avg 16 H1d CH2 CA Ax 16° H1 d START 1 700.000 900 MHz STOP 2 109.000 900 MHz Certificate No: D1900V2—5d163_Sep15 Page 8 of 8


Document Created: 2017-11-18 00:16:59
Document Modified: 2017-11-18 00:16:59
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC