Near Field Power Density Total Exposure Ratio Report

FCC ID: ZNFV500EM

RF Exposure Info

Download: PDF
FCCID_4257630

APPENDIX D: TOTAL EXPOSURE RATIO The total exposure ratio (TER) is calculated by combining all SAR measurements and power density measurements after normalizing to their respective limits. The general expression is below. 𝑁𝑁 𝑀𝑀 𝑆𝑆𝑆𝑆𝑆𝑆𝑛𝑛 𝑆𝑆𝑚𝑚,𝑎𝑎𝑎𝑎𝑎𝑎 𝑇𝑇𝑇𝑇𝑇𝑇 = � +� < 1 𝑆𝑆𝑆𝑆𝑆𝑆𝑛𝑛 , 𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙 𝑆𝑆𝑚𝑚 , 𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙 𝑛𝑛=1 𝑚𝑚=1 The TER shall be less than unity to ensure compliance with the limits. Table D-1 Total Exposure Ratio (1g SAR and 60 GHz Keyssa) Max Σ Max Σ 1g SAR 60 GHz Keyssa Max Σ Reported Reported Reported 1g S Limit Limit S Power Density Σ Ratio to Limit 1g SAR SAR Ratio to Ratio to Limit W/kg W/kg Limit mW/cm² mW/cm² 1.341 1.600 0.838 0.013 1.000 0.013 0.851 Table D-2 Total Exposure Ratio (10g SAR and 60 GHz Keyssa) Max Σ Max Σ 10g SAR 60 GHz Keyssa Max Σ Reported Reported Reported 10g S Limit Limit S Power Density Σ Ratio to Limit 10g SAR SAR Ratio to Ratio to Limit W/kg W/kg Limit mW/cm² mW/cm² 1.365 4.000 0.341 0.013 1.000 0.013 0.354 Approved by: NEAR-FIELD POWER DENSITY FCC ID: ZNFV500EM EVALUATION REPORT Quality Manager Test Dates: DUT Type: APPENDIX D: Page 1 of 1 04/01/2019 – 04/02/2019 Portable Handset © 2019 PCTEST Engineering Laboratory, Inc. REV 1.0 03/26/2019 © 2019 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.


Document Created: 2019-05-09 17:06:40
Document Modified: 2019-05-09 17:06:40
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC