Manual

FCC ID: ZNFV32

Users Manual

Download: PDF
FCCID_2594332

■■ These instructions are divided into the following categories. If the wet main unit is charged, electric shock, short circuit, or corrosion may ■■ Main unit Part Material Surface treatment If you hear thunder, do not touch the power plug. Doing so might cause an electric Do not store the au Nano IC Card (LTE) in places exposed to direct sunlight or hot occur and overheating may cause fire or malfunction or burns. shock as a result of a lightning strike. and humid places. Doing so may cause a fault. This symbol indicates the potential and imminent danger of death or Exterior case (microSD memory card PC+TPE resin - Not liquids Be sure to read the following hazards before use. Don’t Don’t serious injury*1 to a person. slot/periphery cover) This symbol indicates "the possibility of death or serious injury to a Back cover Blue, Pink PC resin UV coating Before cleaning the specified charging equipment (sold separately), unplug its Store the au Nano IC Card (LTE) out of reach of small children. Accidental swallow person". Do not puncture the product with a nail, hit with a hammer or step on the product. power plug from the outlet or cigarette lighter socket. If the plug remains plugged might cause suffocation, injury, etc. No White - wet hands Doing so might cause fire or damage. Unplug in when you clean the equipment, it might cause an electric shock or short circuit. Do This symbol indicates the possibility of personal minor injury*2 to a person Don’t Volume key Blue, Pink PC+TPU resin UV coating LGV32 or physical damage*3. White - Wipe off the dust on the power plug. Failure to do so might cause a fire, burns, or Do not splash with water or other liquids. Also, never use in places subject to Do not disassemble, modify or directly solder the product. Doing so might cause electric shock. ■■ LG TV antenna cable 01 *1 Serious injury : This refers to loss of sight, injury, burns (high- and low-temperature), direct splashing with water or pet urine, etc. or in humid places such as bath Power key PC+TPU resin NCVM Not liquids areas, or use with wet hands. Doing so might cause electric shock, fault from spilling of the battery liquid resulting in an accident such as loss of eyesight if it Do electric shock, broken bones, injuries with residual aftereffects from poisoning, Not gets into the eyes, or cause overheating, injure, fire or rupture. Display Hardened glass Easy cleaning coating Be sure to read the following warnings before use. Notes on Usage short-circuiting, or corrosion of electronic circuits. In the event that the product is disassembly Install and position in-car devices where they do not hinder driving or safety etc., and injuries requiring hospital admission for treatment or long term hospital Earpiece Stainless steel PVD coating splashed with liquid, immediately disconnect the AC adapter's power plug. Faults equipment such as airbags. It might cause a traffic accident. Install in-car devices attendance as an outpatient. Be careful not to have the product bitten by your pet. It might cause liquid Lens for the camera Soda-lime glass AR, AF coating ・ "Setting Guide", "Basic Manual", "Notes on Usage", etc. are collectively referred to as No caused by wetting with water or humidity are not covered by the warranty and Do following the instructions of their manuals. LG TV antenna cable 01 is not waterproof. Do not splash with water or other "Instruction Manual". *2 Minor injury: This refers to injuries, burns (high- and low-temperature), electric shock, wet hands charges will be incurred for repair. leakage, overheating, rupture, fire, injure or ignition of the internal battery. Camera lens decoration AL Anodic oxide liquids. Also, never use in places subject to direct splashing with water or pet ・ In this manual, isai xxx (LGV32) is usually referred to as the "product". etc. that do not require hospital admission for treatment or long-term hospital Do Photo light, infrared port PC resin - When the AC adapter is not to be used for a long time, disconnect the AC Not liquids urine, etc. or in humid places such as bath areas, or use with wet hands. Doing so ・ In this manual, "microSD™ memory card", "microSDHC™ memory card" and attendance as an outpatient. Although this product model has waterproof property, stop using it if liquid such adapter's power plug from the power outlet. Doing so might cause fire or a fault might cause electric shock, fault from overheating, fire, electric shock or corrosion "microSDXC™ memory card" are abbreviated as "microSD memory card" or "microSD". *3 Physical damage: This refers to extended damage to buildings, furniture, livestock, or as water gets inside the main unit from the back cover. Continued use of the Unplug of electronic circuits. Do not bring the product close to magnetized objects such as cash cards, floppy pets. Not liquids product in this state might cause overheating, fire, or a fault. Be sure to read the following warnings before use. disks, credit cards, and prepaid cards. Doing so might result in loss of recorded Do not use in places subject to direct splashing with water, pet urine, or other No Don’t information. wet hands ■■ Explanation of graphic symbols used in this manual liquids. Doing so might result in faults and injure resulting from overheating, fire, Do not use a cell phone while driving a car or riding a motorbike or bicycle. It might Not liquids electric shock, or short-circuiting of electronic circuits. In the event that the Indicates that use in a No cause a traffic accident. Use of a cell phone while driving a car or motorbike is Do not allow liquids, metal objects, burnable items, and other foreign matter to get wet hands product is splashed with liquid, immediately disconnect the AC adapter's power April 2015, 1st Edition place where the product Don’t prohibited by law. Use of a cell phone while riding a bicycle may be punishable by inside the microSD memory card slot or earphone terminal. Failure to do so might Be sure to read the following cautions before use. MFLxxxxxxxx Indicates an action Don’t cause fire, electric shock, injure or a fault. plug. is likely to get wet or When removing the back cover, do not exert more than necessary force. Doing so some regulations. that is not allowed. Don’t Not liquids allowing the product to might cause injury or a fault. Do not swing the product around by holding earphones, LG TV antenna cable 01, Do not make the connecting plug of LG TV antenna cable 01 dirty. Doing so may Do not use the product while you are aboard an airplane. Use of electric devices get wet is not allowed. Don’t etc. Doing so might cause an accident or damage. Be sure to read the following warnings before use. cause a fault. transmitting radio waves in airplane is prohibited by law. Some airline companies, For inquiries, call: Do not operate the product while driving a car or motorbike, riding a bicycle, or Don’t however, allow their passengers to use cell phones. For details, contact the airline Don’t Do Indicates that handling with Indicates an action walking. Doing so may compromise traffic safety and cause an accident. company you use. Customer Service Center Keitai Guarantee Service Center Do not use it with microSD memory card slot cover closed. Doing so might result Do not use in humid places such as bath areas, or connect/disconnect the AC Insert or remove the connecting plug of LG TV antenna cable 01 into/from the No wet hands is not allowed. that must be done. Don’t adapter with wet hands. Doing so might cause electric shock, injure or a fault. For general, charge, operations (toll free) For loss, theft or damage (toll free) wet hands Do This product sometimes affects high-precision electronic devices. So, turn it off in malfunction due to dust and water getting in. earphone jack straightly. Do Not liquids Do Business hours 9:00～20:00 (7 days a week) Business hours 9:00 – 21:00 (7 days a week) If charging is not completed after the specified charging time, stop charging. near such devices. (Examples of electronic devices that might be affected by From fixed-line phones: From au cell phones: From fixed-line phones/au cell phones, Indicates that the power Failure to do so might cause leakage of liquid, overheating, rupture or ignition. Do the product include cardiac pacemakers, hearing aids, other electronic medical Indicates that disassembly Be careful when setting vibrator (vibration) or ringtone if you heart is weak. Doing If you feel any abnormality with your skin, immediately consult a dermatologist. 0077-7-111 157 area code not required 0120- 925- 919 Not is not allowed. plug must be disconnected Don’t devices, fire alarms, and automatic doors. If you are using an electronic medical so might result in bad effect to heart. No Itching, rashes, eczema, etc. sometimes occurs depending on your physical disassembly Unplug from the power outlet. device, contact the device manufacturer or retailer for information about the Do wet hands Do constitution and condition. PRESSING ZERO WILL CONNECT YOU TO AN OPERATOR Do not leave in places within the reach of small children. Small children might possible affect of radio waves.) AFTER CALLING 157 ON YOUR au CELL PHONE swallow small parts, etc. by mistake and choke on them, or might drop them by Pay attention to items stuck to the main unit. The speaker uses magnets, and Charge the battery in a stable place. If placed on an inclined surface or wobbly ■■ Precautions common to the main unit, battery pack, charging equipment, au Cell phone and PHS operators collect and recycle unused telephones, batteries and Don’t mistake and cause accidents or injury. When using the product near an implanted pacemaker, implanted cardioverter- so thumbtacks and pins, craft knife blades, staples, and other metal objects ■■ The materials of parts used on the LG TV antenna cable 01 are as follows. For service canceling procedure in case of loss or theft stand, the product might fall causing injury or damage. Pay careful attention while battery chargers at stores bearing the Nano IC Card (LTE), peripheral devices defibrillator or other electronic medical device, radio waves might affect these Do sometimes become stuck to the main unit, and cause unexpected injury. Before (toll free) logo regardless of brand and manufacturer Do vibrator is set. In addition, do not cover or wrap the product with a cloth or bedding. Do units and devices. So, please observe the following. using the product, be sure to check that there are no foreign objects on the Part Material Surface treatment Business hours 24-hour (7 days a week) to protect the environment and reuse Doing so might cause a fire, injure or a fault. valuable resources. Be sure to read the following hazards before use. Be sure to read the following cautions before use. 1. Those with an implanted pacemaker or implanted cardioverter-defibrillator speaker or other parts. Earphone jack (body) TPE resin - From fixed-line phones: From au cell phones: should carry or use the product at least 15 cm away from the pacemaker or When unplugging the plug of the specified charging equipment (sold separately) 0077-7-113 113 area code not required cardioverter-defibrillator applied part. Do not place the product directly on sand at a beach, etc. Sand or other small from the power outlet, hold and pull the power plug. Pulling on the cable might Cable TPE resin - Be sure to use only the specified peripheral devices. Use of other devices might Do not store the product in places subject to direct sunlight (e.g. in cars), places particles might get inside the earpiece (receiver), microphone (microphone), or Do damage it. Connecting plug (body) TPE resin - 2. Set the product to airplane mode or turn off the power in advance in places In case above numbers are not available, cause overheating, ignition, rupture, fault, or leakage of liquid. that get hot, places that get extremely cold, and in humid or dusty places. Doing Don’t speaker, causing the volume to drop. If sand gets inside main unit, it might cause Connecting plug (metal Brass Gold plating where you cannot move freely or where you cannot secure a distance of more 0120- 977- 033 (except Okinawa) Do Don’t so might cause overheating, fire, deformation or a fault. than 15 cm with one another, since there may be people with a implanted overheating or a fault. Do not use the common DC adapter 03 (sold separately) with the car engine parts) stopped. Doing so might result in draining of the car battery. 0120- 977- 699 (Okinawa) Do not use, store or leave the product in hot places (e.g. by the fire, near a heater, Do not leave on unstable places such as rocky stands or tilting surfaces. cardiac pacemaker or implanted cardioverter-defibrillator nearby. When using the product for calling or data communication, be careful not to keep Don’t Sold by: KDDI CORPORATION, under a kotatsu, in direct sunlight, in a car in the hot sun). Doing so might cause Dropping the product may cause injury or damage. Pay sufficient attention while 3. Pay attention to the following points when using the product inside medical the product in direct contact with your skin for a prolonged period, or not to cover OKINAWA CELLULAR TELEPHONE COMPANY Don’t ignition, rupture, fault, fire or injury. Don’t vibrator is set to ON. Also, pay sufficient attention to impact, etc. institutions. Don’t the product with paper, cloth, bedding, etc. The main unit might get hot, causing Handling Precautions Imported by: LG Electronics Japan Inc. ■■ au Nano IC Card (LTE) Before entering an area where flammable gas is generated such as a gas station, Do not cover or wrap this product with bedding, etc. while using or charging the • Do not bring the product into operating theaters, intensive-care units (ICU) and fire, injure, burns or a fault. Manufactured by: LG Electronics Inc. These precautions are provided to ensure that performance can be fully be sure to turn off this product. Do not charge the battery. Failure to observe product. Doing so might cause fire, fault or injury. coronary care units (CCU). Be sure to read the following warnings before use. demonstrated. Do these precautions might cause the gas to catch fire. In addition, when using Don’t • Turn the product off in hospital wards. ■■ Battery pack Thoroughly read these precautions to ensure correct use. Osaifu-Keitai® at a gas station, be sure to turn off the power in advance. (If NFC/ • Even if you are in a lobby, etc., be sure to turn the product off when there are Exemptions Osaifu-Keitai® lock has been set, cancel the lock before turning off the power.) Do not touch the main unit of the product and the specified AC adapter (sold separately) for a long time while power is being supplied from an external source. electronic medical devices nearby. (The battery pack of the product is a lithium polymer battery.) When you purchase your cell phone, it is not fully charged. Do not put the au Nano IC Card (LTE) in a cooking apparatus such as a microwave oven or a pressure vessel. Doing so might cause melting, overheating, fuming, ■■ Precautions common to the main unit, battery pack, charging equipment, au Nano IC Card (LTE), peripheral devices Do not put the product in a cooking apparatus such as a microwave oven or a Don’t Doing so might cause low-temperature burns. • When a medical institution has laid down designated areas where use of Li-ion00 Charge the battery before using the product. Don’t loss of data or a fault. • The Company is not liable for any damages arising from earthquakes, lightning, storms, ●● Do not apply excessive force to the product during use. Be sure not to put the product pressure vessel. Doing so might cause ignition, rupture, fault, fire or injury. the product is prohibited or is not allowed to be brought in, abide by the floods or other natural disasters, as well as fires, actions by third parties, other Be careful when using this product in a high temperature place for a long time. It into a tightly packed bag or place a heavy object on the product in a bag. Sitting on Don’t instructions of that medical institution. accidents, intentional or mistaken misoperation by the customer, or use under other might become hot. Use of it with your skin touching the product for a long time the product in your pocket might damage the display or internal circuit board resulting 4. When using electronic medical devices other than an implanted pacemaker Be sure to read the following hazards before use. Be sure to read the following cautions before use. unusual conditions outside the responsibility of the Company. Do not throw the product into a fire or heat it. Doing so might cause fire, rupture or Don’t might cause low-temperature burns. in a malfunction. and implanted cardioverter-defibrillator outside a medical institution (e.g. home • The Company is not liable for any incidental damages (change/disappearance of fire. Keeping an external device connected to the external connector or earphone jack Do not use power outlets or wiring apparatus beyond its rating. Also, exceeding medical treatment), check individually with the manufacturer of the electronic described content, loss of business income, disruption of business, etc.) arising from Don’t If the leaked liquid gets on your skin or clothes, immediately rinse it off with water Be careful when attaching/removing the au Nano IC Card (LTE). Doing so might might damage the connector resulting in a malfunction. Such damage and malfunction rating, for example, by connecting multiple devices to a single power strip might medical device regarding the influence of radio waves. use or inability to use the product. to avoid injury. If the liquid gets into your eyes, do not rub, but after wash your injure your hands or fingers. are not covered by the warranty, even if there is no external damage. Do not short-circuit the connection terminal, earphone terminal, etc. Do not allow Don’t cause overheating and fire. Stay alert to your surroundings when calling, messaging, browsing the Internet, Do • The Company is not liable for any damages arising from failure to observe the Do eyes with water, and immediately consult a doctor to avoid the risk of losing your conductive foreign objects (metal fragments, pencil leads, etc.) to come into shooting photos, playing games, watching TV or listening to music. Failure to do ●● To ensure waterproof property (equivalent to IPX5 and IPX7) of this product, use the described content of the "Instruction Manual". Don’t contact with or get inside the connection terminal, earphone terminal, etc. Doing Do not use the product with the back cover removed. eyesight. If the liquid gets on a device, wipe it off without touching it. Use only the devices specified by the Company to insert the au Nano IC Card Do so might cause a fall or traffic accident. product with the cover tightly closed. • The Company is not liable for any damages arising, for example, from malfunction so might cause a fire, burns, a fault due to heat generation. The battery pack is a consumable item. If the performance of a battery does not (LTE) in. Using a device not specified by the Company might cause loss of data or Note that the waterproof property is not guaranteed in every usage condition. Do not Don’t caused by combination with connected devices or software not related to the Do not send data by infrared communication with the infrared port pointing recover (e.g. the usable time after each charge has become extremely short), the Do a fault. For the specified devices, contact an au shop or Customer Service Center. allow water to get inside the product or splash water on the charging equipment or Company. When using metal accessories, etc., make sure not to allow the metal part come Do not place near corrosive chemicals or in places where corrosive gas is toward eyes. Doing so might affect eyes. Also, sending data with the infrared port Do battery is at the end of service life, so stop its use. Failure to do so might cause optional accessories. Do not attach/remove the back cover in the rain or with water in contact with the connection terminals, earphone terminal or power outlet. Doing Don’t pointing toward some other infrared device might cause false operation, etc. Do not disassemble or modify the au Nano IC Card (LTE). Doing so might cause • Captured image data or downloaded data may sometimes be altered or lost due generated. Doing so might cause a fault or loss of internal data. overheating, fire, rupture, or leakage. Because the battery is a built-in type, an au drops on the surface of the product. Doing so might cause water intrusion resulting in Don’t so might cause electric shock, ignition, injury or a fault. loss of data or a fault. to faults, repair or other handling of the product. The Company is not liable for any Don’t shop will accept holding over and repair for a charge. You may not use the product internal corrosion. When using the photo light, do not lighten in front of person's eye. Do not gaze Not Malfunctions determined to be caused by water intrusion are not covered by the damage or lost income resulting from recovery of these data. Do not expose the camera lens to direct sunlight for an extended period. Doing so for a certain period. Please be forewarned. Note that the length of service life disassembly Do not leave or store with the back cover removed from the main unit. Doing so at the light emitting part when the photo light is lighted. Doing so may cause warranty. • It is recommended you keep a copy of important data on your PC's hard disk, etc. might cause ignition, rupture or fire by the light-collecting mechanism of the lens. Don’t impairment of eyesight, etc. Be especially careful not to take pictures of small varies depending on the usage condition, etc. Don’t might allow dust or other foreign objects to get inside and cause a fault. Do not use or leave the au Nano IC Card (LTE) in hot places such as by the fire Whatever the cause of the defect or malfunction may be, the Company assumes no children from a very close distance. ●● Do not use the product in extremely hot, cold or humid places. Don’t or a heater. Doing so might cause melting, overheating, fuming, loss of data or a responsibility for alteration or loss of saved data. ■■ Charging equipment Don’t fault. (Use within an ambient temperature range of 5℃ to 35℃ and humidity range of 35% The customer is not allowed to disassemble, modify or repair the product. Do not lighten the photo light toward a person who drives an automobile, * "The Company" as appears in this manual refers to the following companies: Do not use the product if there is smoke, abnormal odor or noise, excessive to 85%.) Doing so might cause a fault, ignition, electric shock, or injury. The Company motorized bicycle or a bicycle. If dazzled by the light, the driver might become Sold by: KDDI CORPORATION, OKINAWA CELLULAR TELEPHONE COMPANY overheating, or other abnormalities. If an abnormality occurs, disconnect the Be sure to read the following warnings before use. Do not throw the au Nano IC Card (LTE) into a fire or heat it. Doing so might cause Not is not liable even in the event of any non-conformities arising on the product or Don’t unable to drive and cause an accident. ●● Do not use in places subject to lots of dust or vibration. Imported by: LG Electronics Japan, Inc. disassembly Do specified charging equipment (sold separately) from the power outlet, make sure melting, overheating, fuming, loss of data or a fault. peripheral devices as a result of modification, etc. Modification of the product is in Manufactured by: LG Electronics Inc. that the product is not overheating before turning the power off, and contact an Don’t ●● Clean the connection terminals and earphone terminal with dry cotton swabs, etc. violation of the Wireless Telegraphy Act. Sometimes, very rarely some people demonstrate symptoms such as temporary Do not use at other voltages than the specified power supply voltage. Doing so au shop or Keitai Guarantee Service Center. Also, if you have dropped or damaged muscle spasms, loss of consciousness, etc. by watching repeatedly flickering every now and then. Soiled terminals might cause poor connection. Do not exert a might cause ignition, fire, overheating, injure or electric shock. Do not touch the IC (metal) part of the au Nano IC Card (LTE) or short-circuit it. memo the product, do not continue to use it in that state, and contact an au shop or Do screens. Those with a past history of this should consult with a physician strong force to clean the connection terminals to prevent deformation. Don’t • AC adapter (sold separately): 100 VAC to 240 VAC Doing so might cause loss of data or a fault. Be sure to read the following warnings before use. Keitai Guarantee Service Center. beforehand. • Reproduction of the content of this manual in part or in whole is prohibited. Don’t ●● Clean the product with a soft dry cloth (such as the type used for eyeglasses). Forceful • Common DC adapter 03 (sold separately) : 12/24 VDC (for negative grounded When inserting an earphone, etc. into the product, adjust the volume to the proper rubbing with a dry cloth may scratch the display. The display may be stained if splash or • The content of this manual is subject to change without notice. vehicles only) Do not drop the au Nano IC Card (LTE) or subject it to strong impact. Doing so Do not drop or subject to strong impact, such as throwing. Doing so might cause level. Setting too loud a volume or using the earphone continuously for a long smear is left attached to the surface. Wiping the product using alcohol, thinner, benzene, • Every effort has been made in the preparation of this manual. Should you notice any Be sure to read the following cautions before use. may cause a fault. detergent, etc. might erase the printing on the outer casing or cause discoloration. rupture, overheating, ignition, or a fault. Do period of time might adversely affect your ears. Firmly insert the plug of the specified charging equipment (sold separately) unclear points, omissions, etc., feel free to contact us. Don’t Don’t Also, raising the volume too high might prevent you from hearing sounds around into the power outlet or cigarette lighter socket down to the base of its pins. ●● Use as far away as possible from land-line phones, TVs, and radios. Use nearby might you, which might in turn lead to a traffic accident at a railroad crossing or Use of the main unit in an automobile sometimes affects on-vehicle electronic Do Incomplete insertion of the power plug might result in electric shock, overheating, Do not fold, bend or place a heavy object on the au Nano IC Card (LTE). Doing so Do not use outside when you can hear thunder. Doing so might risk lightning affect them. pedestrian crossing. ignition, injure and fire. Do not use the damaged specified charger, power outlet or Safety Precautions (Observe Strictly) strikes and electric shock. devices, though this rarely happens. If this happens, stop use since this may Don’t impair safe travel. cigarette lighter socket with loose insertion connector. Don’t may cause a fault. ●● The product may become warm while charging etc., depending on the situations, but Don’t When adjusting the volume with an earphone, etc. inserted into the product, raise this is not abnormal. ■■ Before using the product, thoroughly read these safety precautions for proper the volume a little at a time. If you raise the volume too much from the outset, If you feel any abnormality with your skin, immediately consult a dermatologist. If the fuse in the common DC adapter 03 (sold separately) blows, replace it with Do not wet the au Nano IC Card (LTE). Doing so may cause a fault. Do not let your hands, fingers and other parts of the body touch the connection Do sudden loud noise from the earphone, etc. might adversely affect your ears. a fuse of the specified type (250 V, 1A). Replacing with a different type of fuse ●● When the product is used by a child, parents or guardians should thoroughly read use. After reading, store the precautions in a safe place. Itching, rashes, eczema, etc. sometimes occurs depending on your physical terminals. Doing so might cause electric shock, injury or a fault. Do might cause overheating or fire. (For information about fuse replacement, carefully Not liquids "Instruction Manual" and teach the child how to use it. When using an charging equipment or external device, insert/remove the Do constitution and condition. ●● These "Safety Precautions" describe instructions that should be observed to prevent Don’t read the manual for the common DC adapter 03 (sold separately).) connector straight to/from the terminal. Unless it's correct, it may cause damage ■■ Main unit damage to property or injury to the customer or others using the product. Do not scratch the IC (metal) part of the au Nano IC Card (LTE). Doing so may If the product is damaged because it is dropped or something, and its display Do or a fault. ■■ The materials of parts used on the product are as follows. Do not damage, modify, twist, pull, or place a heavy object on the power cord of ●● Do not forcefully press, tap, or intentionally subject the display to strong impact. Doing ●● These instructions are divided into the following categories. cause a fault. is cracked or internal parts are exposed, do not touch the cracked display or the specified charging equipment (sold separately). Do not use a damaged cord. Don’t so might cause scratching or damage. Don’t exposed parts with your hands. Doing so might cause electric shock or injury from Part Material Surface treatment Don’t Doing so might cause an electric shock, injyure, short circuit or fire. damaged parts. Contact au shop or Keitai Guarantee Service Center. Do not store the au Nano IC Card (LTE) in dusty places. Doing so may cause a fault. Outer case (display frame part) PC resin NCVM Do not let your hands, fingers and other parts of the body touch the connection Outer case (side) PC resin - terminals. Doing so might cause electric shock, injury or a fault. Don’t Don’t

●● Do not forcefully press your fingernails, sharp objects, or hard objects against keys or ■■ Touch Panel ■■ Backup content on the product *3 IP6X equivalent means that the product will securely maintain its function of no grit In the bath: You can use the product in a bathroom. Although you can make calls with b Hold the product firmly and shake it about 20 times in the direction • Wireless LAN (Wi-Fi®) has the advantage that it can be freely connected anywhere display surface. Doing so might cause scratching or damage. and dust getting inside the main unit even after it has been placed in an apparatus wet hands, do not immerse the product into a bathtub. The product is not resistant to hot The touch panel is designed to be lightly touched by fingers. Do not apply strong ●● Use your finger to operate the touch panel. Do not use ballpoint pens, pencils, or other ●● Please back up* important content recorded or downloaded for the product to an temperatures. of the arrow shown in the figure until water drops no longer fly off. within the radio wave range, as it uses radio waves for exchanging information. At the sharp-pointed objects. Using such objects does not only hinder correct operation of outside source. Content recorded to memory on the product sometimes disappears with grit and dust of diameters of 75 μm or less and shaken for 8 hours. same time, there is a risk that a malicious third party may obtain unauthorized access pressure with your fingers or sharp-pointed objects (such as fingernails, ballpoint pens, Since operation of the product on each usage scene was confirmed based • Do not use the product in a bathroom for an extended period of time. The product is When shaking the product, confirm the safety around you and hold it firmly so the touch panel, but also might cause scratching or damage to the display. or is altered by unexpected factors, such as static electricity or a fault, repair, if security settings have not been configured. You are recommended to configure and pins) on the touch panel. mishandling, etc. on the above assumption, proper operation of the product in every possible not moistureproof. as not to drop it. In the following cases, the touch panel may not work even if you touch it. Note that it ●● Do not put stickers or sheets (e.g. commercially available protective films, peep security settings before using wireless LAN at your decision and responsibility. * How to make backups: Store important data such as contacts data, music, condition during actual use is not guaranteed. Malfunctions determined to be • Do not immerse the product in hot spring water, soap water, detergent water, or water c Cover the power key and volume key with a towel, cloth, etc. and may cause malfunction. prevention sheets) on the display. Doing so might cause improper reaction of touch • The Company assumes no responsibility for leakage of data or information that may shot photos and videos on microSD memory cards. You can also send caused by mishandling by the customer are not covered by the warranty. with bath salts in it. Also, do not use the product underwater. Doing so may cause a • Operation with gloved hands panel. fault. press each key two to three times. occur during Bluetooth®/wireless LAN (Wi-Fi®) communication. • Operation with fingernails files as mail attachment or transfer to your PC. Note, however, that there ■■ Important items to remember before use ●● Do not operate the touch panel with fingernails. Doing so might result in split nails or are some data that cannot be copied by using these means. Please be • Extreme changes in temperature cause condensation. Wait until the main unit reaches d Wipe the moisture coming out from inside with a dry towel, cloth, • Since Bluetooth® and wireless LAN (Wi-Fi®) functions use the same frequency band, • Operation with a foreign object placed on the touch panel jammed fingers. ●●For waterproof/dustproof, close the back cover tightly by pressing room temperature before you bring the product from a cold place into a warm bathroom. using the both functions at the same may cause radio wave interference resulting in • Operation with a protective sheet or sticker on the touch panel forewarned. etc. ●● If the display surface is dirty or wet with sweat or water, it may not function correctly. the cover along the lines below. And, close au Nano IC Card (LTE) • If condensation occurs inside the display, leave the product at room temperature for a decreased communication speed or disconnection from the network. If connection fails, • Operation with water drops left or frozen on the surface In such case, wipe the display surface with a dry, soft cloth. tray and microSD memory card slot cover tightly too. while until the condensation is cleared. stop using either of the Bluetooth® and wireless LAN (Wi-Fi®) functions. • Operation with wet or sweaty fingers Available Security Codes • Do not splash the product with hot water. The product is not resistant to hot • Operation under water ●● When carrying the product in your pocket or bag, take care not to put the touch panel temperatures. Bluetooth® and wireless LAN (Wi-Fi®) functions of this product use frequencies in the 2.4 ●● Do not remove the stickers printed with the IMEI that can be seen when the back pack is close to metals or other conductive materials, as it might cause false operation of the The product has various security codes that you can use. GHz band. removed. These stickers prove that the product and the communication module you are touch panel. The available security codes are as follows. Do not forget the various security codes that • Do not bring the Smart phone Cradle (sold separately) into a bathroom. 2.4FH1/DS4/OF4 using comply with the Wireless Telegraphy Act and Telecommunications Operations Act. are set as they are necessary for various operations and contracts. • Do not bring LG TV antenna cable 01 into a bathroom. ■■ Battery pack ●● Never use modified au cell phones. Use of a modified device violates the Radio Law. ●●Security code • Bluetooth® function: 2.4FH1 ●● Use in very hot or cold environments, for example, when left in a car with the windows In the kitchen: You can use the product in the kitchen and other places where water is The product has acquired the certification of conformity with technical regulations closed in summer, will cause the battery pack capacity to drop and shorten the This product uses the 2.4 GHz band. FH-SS is used as the modulation scheme. The Example of a To do remote operation of voice mail and call forwarding used. for the specified radio station based on the Radio Law, and the "Technical Conformity available battery usage time. This will also shorten the battery pack service life. Try to interference distance is about 10 m or less. usage services from a landline phone • Do not splash the product with or immerse it in soap water, detergent water, Mark " is printed on the nameplate of the product as a certificate. Confirm nameplate use the battery pack as far as possible at room temperature. • Wireless LAN (Wi-Fi®) function: 2.4DS/OF4 following the operations below. b To use Customer Service Center and to do various inquiries, seasonings, juices, etc. other than tap water. This product uses the 2.4 GHz band. DS-SS and OFDM are used as the modulation Home screen u Touch and hold " "u "System settings" u "General" tab u "About ●● Charge the battery before using the product for the first time after purchase, or if you applications, and modifications on the au homepage • Do not immerse the product in or splash it with boiling water. The product is not • Waterproofness/dustproofness is only effective when the covers are securely closed. schemes. The interference distance is about 40 m or less. have not used the product for a long time. resistant to hot temperatures. phone" u "Regulatory and Safety" Initial value A four digit number chosen by the customer and noted on the application If the product is modified by turning the screw to the left to disassemble, technical form • Just a small particle (a hair, etc.) on the seals can cause water leak. • Do not place the product where it gets extremely hot or cold such as near a stove or in e Place it on a dry towel, cloth, etc. and let it dry at ambient • Bandwidth to use: Full band ●● The battery pack is a consumable item. If the performance does not recover after This means that full band can be used, and that band of mobile unit identification devices standard compliance becomes invalid. Never use the product without the valid charge, the built-in is at the end of its service life, so stop using it. Because the • Do not open/close the external connection terminal cover or back cover if the main unit or your a refrigerator. temperature. (Around 30 minutes) can be avoided. certification. Doing so violates the Radio Law ●●PIN code hands are wet. battery is a built-in type, an au shop will accept holding over and repair for a charge. ■■ Common precautions If it is not fully dried, the sound may become hard to hear. Let it fully dry before • Available channels differ depending on the country. ●● To prevent unlawful modification, the product has been designed so that it cannot be You may not use the product for a certain period. Please be forewarned. The life time ●●Do not immerse the product in water with soap, detergent or bath • Back cover use. Example of • For use in an airplane, check with the airline company in advance. easily disassembled. Modifying the product is prohibited by the Radio Law. of the internal battery depends on the usage etc. To prevent unauthorized use of the au Nano IC Card (LTE) by third parties salts in it. Make sure that the back cover is securely attached. Just a small particle (a hair, etc.) ■■ Precautions on charging usage ●● Contents saved in the product, such as contacts, mails and favorites, might be altered ●● The built-in batteries sometimes swell up as they approach the end of their service on the seals can cause water leak. The supplied and optional accessories are not waterproof/dustproof. Be sure to check the 5GHz Frequency Band Precautions or lost in an accident, fault, repair or mishandling. Be sure to keep a copy of important life. This is due to the properties of lithium polymer batteries, and is not a problem in Initial value 1234 Do not attach/remove the back cover with gloved hands. Just a small particle (a hair, following points before and after charging. contents. Note that Company assumes no responsibility for any damages or lost terms of safety. etc.) on the seals can cause water leaks. Wipe off any minuscule droplets of water or Wireless LAN (Wi-Fi®) function of this product uses 5 GHz band. • Never charge the battery if the main unit is wet. Doing so might cause electric shock IEEE802.11 b/g/n Using the 5.2 GHz band and 5.3 GHz band outdoors is prohibited profits resulting from altered or lost contents. ■■ Charging equipment ●●Lock No. (NFC/Osaifu-Keitai lock) dirt with a clean dry cloth before closing the covers. or short circuit resulting in a fire, burns or a fault. by the Radio Law. IEEE802.11 a/n/ac ●● Note that contents (both charged or free content) saved with the product cannot be If the back cover is deteriorated or damaged, the waterproof/dustproof property • Check that the main unit is not wet. If you are charging the battery just after the product ●● When not using the specified charging equipment (sold separately), remove the AC Soap/Detergent/Bath salts The channels used on the product are as follows. returned to the customer when it is replaced for repair of a fault, for example. Example of becomes ineffective. In such case, contact an au shop near you or Keitai Guarantee gets wet, drain water well and wipe remaining water off with a clean dry cloth before W52 W53 W56 adapter's power plug from the power outlet or cigarette lighter socket. Lock No. (NFC/Osaifu-Keitai lock) ■■ HT20 usage ●●Do not immerse the product in seawater, a swimming pool or hot Service Center. connecting it to the specified charging equipment (sold separately). ●● The product uses liquid crystal for its display. The display response speed may ●● Do not wrap the cord of the specified charging equipment (sold separately) around the W52 (5.2 GHz band/36, 40, 44, 48 ch) become slow when the ambient temperature is low, which is due to the property of adapter itself. Doing so might cause electric shock, fault, injure, overheating or fire. Initial value 1234 spring. • If any liquid other than plain water gets on the product • Do not touch the specified charging equipment (sold separately) with wet hands. Doing W53 (5.3 GHz band/52, 56, 60, 64 ch) If any liquid other than plain water (e.g. seawater, detergent, alcohol) gets on the so might cause electric shock. liquid crystal and not a malfunction. The display response speed will return to normal W56 (5.6 GHz band/100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 ch) at room temperature. ●● Do not forcibly bend the charging equipment's plug or the connection between product, immediately rinse it with plain water. • Do not splash water over the specified charging equipment (sold separately) when ●● Although the display used on the product is made using high-precision technology, the connector and power cord. Doing so might cause electric shock, fault, injure, Privacy Protected Function You can wash the product under a mild flow (up to 6 liters per minute) of tap water using them. Do not use them near water such, as in a bathroom, shower room, kitchen ■■ HT40 ■■ HT80 overheating or fire. at room temperature (5 ℃ to 35 ℃ ) at a distance of about 10 cm from the faucet or or washroom. Failure to do so might cause fire, electric shock, injure or a fault. Do not W52 (5.2 GHz band/38, 46 ch) W52 (5.2 GHz band/42 ch) some pixels (dots) might be lit or out at all times. Note that this is not a malfunction. The function shown below is installed in the product to protect the privacy of the saved data. showerhead. bring them into a bathroom, etc. even when you are not charging with them. Failure to ■■ au Nano IC Card (LTE) W53 (5.3 GHz band/54, 62 ch) W53 (5.3 GHz band/58 ch) ●● Take care not to inconvenience people around you when you use the product in a Seawater Hot spring If the product gets dirty, instead of using a brush, wash it with your hands holding the do so might cause fire, electric shock, injure or a fault. W56 (5.6 GHz band/102, 110, 118, 126, 134 ch) W56 (5.6 GHz band/106, 122 ch) public place. ●● The au Nano IC Card (LTE) is lent to you by au. In case of loss or damage, the card will Function Description back cover and external connection terminal cover so that they do not open. be replaced at your expense. When a malfunction is suspected, or in case of theft or Screen lock Set Swipe, Face Unlock, Knock Code, Pattern, PIN, or Password to secure ●●Do not immerse the product in any liquid (alcohol, etc.) other than • After the product gets wet ●● You are recommended to store copies of individual data such as photos you took, videos and music on your PC by sending each file as mail attachment, etc. Note, loss, contact an au shop or PiPit. data when turning on the phone or when unlocking the screen. water. After the product gets wet, drain water, and wipe the main unit and the back cover with Bluetooth®/Wireless LAN (Wi-Fi®) Function Notes on Packet Communication Charge however, that you may not be able to make copies of any copyrighted data even by the ●● Do not forcibly remove or insert the au Nano IC Card (LTE). Be careful not to exert ●●Do not place the product directly on the sand at a beach, etc. Sand a clean dry cloth without removing the back cover. excessive force when inserting the card into your au cell phone. • The Bluetooth function and the wireless LAN (Wi-Fi ) function of this product ® ® • Since a constant Internet connection is possible with the product, packet above mentioned means. or other small particles might get inside the earpiece, microphone In cold climates, water on the main unit may turn to frost. Using the product with PIN Code frost may cause a fault. Do not leave the product without wiping off water. (No special conforms to the domestic standards of Japan, FCC standards, and EC directives, and communication may be performed automatically by some applications, resulting in high ●● You are responsible for any damage caused by inserting your au Nano IC Card (LTE) ●● Take care not to place magnetized items such as magnetic cards, speakers and TV or speaker, causing the volume to drop. If sand gets inside the measures against condensation have been implemented in this product.) has been certified. packet communication charges. sets near the product, as it might cause malfunction. into some other IC card reader/writer, etc. ■■ PIN code Therefore, subscription to a packet communication charge discount service or flat late product’s main unit, it might cause overheating or a fault. • Rubber seals • The 2.4 GHz band used by wireless LAN (Wi-Fi®) and Bluetooth® devices is shared Putting a strong magnetism close to the product might cause false operation. ●● Keep the IC (metal) part of your au Nano IC Card (LTE) clean. Wipe the card with a dry, To prevent unauthorized use of the au Nano IC Card (LTE) by a third party, you can set plan is recommended. by various other devices. For this reason, the communication speed and connectable soft cloth (such as for cleaning eyeglasses) for cleaning. the product to require PIN code entry every time the power is turned on. You also need to Rubber seal in au Nano IC Card (LTE) tray and microSD memory card slot cover plays ●● When you put the product in your pocket or bag, take care so that the display does range may be decreased, or disconnection may occur, due to interference from other • On the product to browse websites, download applications, communicate using enter PIN code when setting whether the PIN code entry is required. an important part in waterproof/dustproof property. not come in contact with metal objects or other hard objects. Doing so might cause ●● Do not put stickers, etc. on the au Nano IC Card (LTE). devices. applications, send/receive e-mails, and configure various settings, connection to the If the PIN code is incorrectly entered three times consecutively, the PIN code will be Do not damage or remove the rubber seals. Take care not to get the rubber seals Internet is required, to which packet communication charge applies. scratching or damage. Also, be careful not to scratch or damage the display by using a • Do not use this product in places where electromagnetic waves are generated or near ■■ LG TV antenna cable 01 locked. You can unlock the PIN code using PUK code. caught when closing au Nano IC Card (LTE) tray and microSD memory card slot cover. * Packet communication charge does not apply to wireless LAN (Wi-Fi®) connection. strap whose metal or other hard part comes in contact with the display. electric products, AV and OA equipment, or other magnetized devices. • Entering PIN code is not required by default state. In "Lock SIM card", however, you can Sand/Mud Forcibly closing the cover with the rubber seals caught may damage them resulting in ●● LG TV antenna cable 01 is not covered by the warranty. • Subjecting this product to magnetic or electrical noise might increase noise and ●● When suddenly brought into a warm place from a cold place, or when in a humid change the setting requiring to enter PIN code. loss of waterproof/dustproof property. Just a small particle (a hair, etc.) on the seals location, or when used where temperature suddenly changes such as near the air ■■ Camera Also, PIN is required when setting "Lock SIM card". ●●Do not use the product underwater. can cause water leak. If any liquid other than plain water (e.g. alcohol) gets on the prevent it from performing communications. (This product is particularly susceptible to Applications discharge port of an air conditioner, water droplets (i.e. condensation) sometimes form noise when it used near a microwave oven.) ●● When using the camera, follow common rules of etiquette regarding camera use. • The preinstalled PIN was set to "1234". You can change PIN code to any four- to eight- rubber seals, it may cause deterioration in durability. inside the product. Note that when used under conditions such as this, the humidity ●●Do not leave the product in a humid place such as a bathroom or • Using this product near a TV, radio or similar appliance might cause reception • Be sure to check the security of the application, then install it at your own risk. Some digit number in "Change SIM PIN" if necessary. Do not insert the sharp pointed object in au Nano IC Card (LTE) tray or microSD might cause corrosion or a fault. ●● Image data might be altered or lost due to malfunction, repair or mishandling of the kitchen for an extended period of time. memory card slot cover. Doing so might damage or deform the product or damage the interference and disrupt TV images. applications might cause virus infection, damage various data, and send out your product. The Company takes no responsibility for the recovery of altered or lost data, ■■ PUK code • The searching might not be successful if there are multiple wireless LAN (Wi-Fi ) ® location information, usage history or personal information stored in your cell phone via ●● When wiping the display, wipe with a soft, dry cloth. Use of a moistened cloth, glass ■■ Tips for comfortable use rubber seals, causing water leak. the damages resulting from altered or lost data, and lost profits. In case the PIN code is locked, you can unlock it by entering the PUK code. access points near to the product or the same channel is being used. the Internet. cleaner or other similar liquid might cause a fault. When attaching back cover, confirm if au Nano IC Card (LTE) tray and microSD memory • PUK code is an eight-digit number given at the time of purchase, which is printed on • Once the product gets wet, water may remain in gaps of the main unit. Shake the • The Company assumes no responsibility for any operation problems that might be ●● When photographing important occasions (such as a wedding), take a trial shot and card slot cover are attached firmly. • The wireless LAN function cannot be used in airplane. Be sure to turn off the power even ●● When connecting/disconnecting the external device to/from the connection terminal the back side of the plastic card on which your au Nano IC Card (LTE) is attached. product well to drain water. Especially make sure to drain water remaining in the hinge caused by the applications you have installed. In such case, you may be charged a check the shot image make sure it is correctly shot. It is recommended to replace the parts for maintaining waterproof/dustproof property in a wireless LAN (Wi-Fi®) compliant airplane. Some airline companies, however, allow their or the earphone terminal, make sure that the connector of external device is straight part, back cover and key parts. repair fee even during the warranty period. • After entering the PUK code, you need to set a new PIN code in "Change SIM PIN". passengers to use cell phones. For details, contact the airline company you use. with the connection terminal. ●● Do not use the camera for recording commercially available books or information of • Even after water is drained, the inner parts might be still wet. Although you can use the once every two years regardless of whether any abnormality is present. For information • If the PUK code is incorrectly entered 10 times consecutively, contact an au shop, • The communication speed and connectable range vary depending on the distance • The Company assumes no responsibility for any disadvantage brought to you or any which photographing is not allowed. product, do not place it near things that must not get wet. Take care not to wet your on part replacement, contact an au shop nearby. ●● Note that applying unnecessary force with the connection terminal or the earphone PiPit or Customer Service Center. between communication devices, obstacles and the devices to connect. third party by applications you have installed. terminal connected to the external device might cause damage. ●● Do not leave the camera lens exposed to direct sunlight. Imaging elements might be clothes, bag or contents of the bag. • Charging • Depending on applications, microSD memory card is required when using the • Drain water if it becomes temporarily hard to hear the sound due to water remaining in Never charge the battery if the main unit is wet. ●● Do not discard this product together with regular trash. Please cooperate in the discolored or burnt. memo 2.4 GHz Frequency Band Precautions application. the microphone or earpiece. The supplied and optional accessories are not waterproof/dustproof. collection of the product when it is no longer needed to protect the environment and ■■ Music, videos and TV • Some applications prohibit the product from entering sleep mode while they are active, • If PIN is locked, the product may restart to protect its security. ■■ Notes on various usage scenes • Waterproof property The frequencies used by the Bluetooth® and/or wireless LAN (Wi-Fi®) function of this effectively use resources. Old product are collected at au shops and other places. or rapidly drain the battery while running in the background. ●● Do not listen to music or watch videos or TV while driving a car or motorbike, or riding • "PIN code" is not reset by Factory data reset. Do not use the product in places where it may be sprayed with high-pressure water (e.g. product are in the 2.4 GHz band. In this frequency band, other similar wireless stations, In the rain: You can make calls holding the product with wet hands in the rain without an • Operational procedures and screen appearances of the applications preinstalled in the ●● Do not insert a card other than microSD memory card into the microSD memory card a bicycle. Use of cell phones while driving a car or motorbike is prohibited by law. (Use near a faucet or showerhead) or submerge it in water for extended periods of time, as in-plant wireless stations for mobile unit identification that require a license to use, such umbrella. product and those installed by you are subject to change without notice as a result of slot on this product. of cell phones while riding a bicycle may also be punishable by law.) In addition, stay the product is not designed to withstand high water pressure. Also, do not expose the as factory production lines, specific small power wireless stations that do not require alert to the traffic around you even when walking. Surrounding sounds may not be heard • The rain in this case means a moderately-heavy rain (less than 20 mm per hour). version upgrade. In addition, operating procedures described in this manual may differ ●● Do not exert excessive force when attaching/removing a microSD memory card. Doing clearly, and gazing at the screen might distract your attention causing a traffic accident. Notes on waterproof and dustproof properties • Water drops on the display might cause errors in the touch panel operation. product to a water flow stronger than the specified flow rate (i.e. 6 liters per minute licenses, amateur wireless stations (collectively called "other wireless stations" from here on) are operated in addition to home electrical appliances such as microwave ovens, from the actual procedures. so might injure your hands or fingers. from a faucet or showerhead, at which you might even feel pain in the skin). Doing so Be especially careful at railroad crossings, on a platform, and at pedestrian crossings. • Never open/close the external connection terminal cover or back cover if the product devices for industrial, scientific and medical devices. This product has a waterproof property equivalent to IPX5*1 and IPX7*2, might cause a fault, even though the product has a waterproof property equivalent to ●● While writing/reading data to/from a microSD memory card, do not subject the product is exposed to rain, or your hands are wet. 1. Before using the product, make sure that "other wireless stations" are not in ●● Take care not to listen at ear-splitting volume for a long time, as it might affect as well as a dustproof property equivalent to IP6X*3 on the condition IPX5. Do not wash the product in a washing machine or ultrasound bath. to vibration or impact or turn off the power. Doing so might cause loss of data or a operation nearby. hearing. that the back cover, au Nano IC Card (LTE) tray and microSD memory This product does not float on water. fault. In the shower: You can make calls holding the product with wet hands while taking a ●● Be careful of sound leakage from earphones in trains or other places with many people card slot cover are securely attached (based on in-house testing). 2. In the event that instances of radio wave interference have occurred between this shower. • Heat resistance ●● When hearing the other party's voice, make sure that the earpiece is placed at the Specifically, you can make calls holding the product with wet hands in the product and "other wireless stations", immediately either relocate this product or around you. • Avoid spraying the product with high-pressure water, as the product is not designed to Do not use the product in places where boiling water may splash on it, in saunas or center of your ear. If the earpiece (audio output port) is closed by the ear lobe, it may rain (less than 20 mm per hour) without an umbrella, as well as use the stop operation of the device (stop the emission of radio waves). withstand high water pressure. near hot air (e.g. hairdryer). The product is not resistant to high temperatures. be hard to hear the voice. ■■ Copyrights and rights of portrait product in a place with water such as a bathroom or kitchen. Before using • Shock 3. If you are unclear on any points or are troubled by anything, contact an au shop ●● Even if you cover the microphone to make your voice inaudible to the other party, the ●● You are not allowed to copy, distribute, publish, modify or edit the data you shot, the product, thoroughly read“Important items to remember before use”and Washing: You can wash the product under a mild flow (up to 6 liters per minute) of tap This product is not resistant to shock. Do not drop the product or subject it to shock. or Customer Service Center. other party can hear your voice. recorded or downloaded using the product without the consent of the copyright holder, “Tips for comfortable use”to ensure correct use. Failure to follow the contents water at room temperature (5℃ to 35℃ ) at a distance of about 10 cm from the faucet or Also, do not jab the earpiece, microphone or speaker with a cotton swab or any sharp except for personal use, under the copyright law. described in these sections may cause the intrusion of water, sand or other memo ●● Sound from speaker may be very loud when you use hands-free calling. Keep it away showerhead. object. Doing so might damage or deform the main unit causing water leak. In addition, do not use or modify portraits or names of other individuals without their foreign material, resulting in overheating, fire, electric shock, injury or a fault. from your ear when using it. consent, as it might infringe on rights of portrait. • Do not spray the product with high-pressure water or submerge it in water for extended ■■ Draining water after wetting the product *1 IPX5 equivalent means that the product will maintain its operability as a phone even • The connections between this product and all other Bluetooth® and wireless LAN (Wi- Note that shooting and recording may be restricted at some live performances, shows periods of time, as the product is not designed to withstand high water pressure. Fi®) devices have not been confirmed. Therefore, connections with all Bluetooth® and ●● Do not peel off the black sheet on the back cover (the back part you can see when if it is sprayed with water from a 6.3mm diameter nozzle at a distance of about 3 As some parts of this product are not watertight, if you use the product after it gets wet, removing the back cover). Doing so might make it impossible for NFC/FeliCa data and exhibitions even for personal use. • Make sure that the back cover is tightly closed, and holding the external connection water remaining in those parts might wet your clothes or bag, or the sound might become wireless LAN (Wi-Fi®) devices have not been confirmed. meters for more than 3 minutes at a rate of about 12.5 liters per minute from any recognition. terminal cover so that it does not open, wash the product with your hands. Do not use hard to hear. ●● Be careful about the copyright and portrait right when posting photos you shot, etc. direction. • This product supports security features for wireless communications that are compliant a brush or sponge. Follow the steps below to drain water. ●● When you put a sticker, etc. on the proximity sensor, the sensor will malfunction and on Internet homepages. *2 IPX7 equivalent means that the product will maintain its operability as a phone with with the Bluetooth® and wireless LAN (Wi-Fi®) standard specifications, but the security • Do not wash the product in a washing machine or ultrasound bath. indications on the display will turn off at all times while receiving or making a call. In no water getting inside the main unit even if it is gently submerged in a tank of still a Carefully wipe the moisture off the main unit with a dry towel, cloth, may not be sufficient depending on the usage environment and configuration. Be careful this case, note that you may not be able to operate the product. • Do not splash the product with or immerse it in soap water, detergent water, etc. other tap water at room temperature to a depth of 1 meter for about 30 minutes. than tap water. etc. when making data communication using Bluetooth® or wireless LAN (Wi-Fi®) function.

DRIVING Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Specific Absorption Rate (SAR) of Cell Phones Full attention should be given to driving at all times and local laws and regulations Telecommunications & Internet Association (CTIA) website at http://ctia.org/. Others restricting the use of wireless devices while driving must be observed. For software installed in this product or part of the installed software, This model LGV32 mobile phone complies with Japanese technical regulations and international guidelines regarding exposure to radio waves. HOSPITALS Export Administration you are not allowed to change, translate or adapt, reverse, engineering, This mobile phone was designed in observance of Japanese technical regulations Mobile phones should be switched off wherever you are requested to do so in hospitals, decompile, reverse assemble them, or do anything related to the above. regarding exposure to radio waves* and limits to exposure to radio waves recommended Regulations This product and its accessories may fall under the category of application of This product is licensed complying with the MPEG-4 Visual clinics or health care facilities. These requests are designed to prevent possible by a set of equivalent international guidelines. These international guidelines were set out Japan Export Control Regulations ("Foreign Exchange and Foreign Trade Law" and relevant Patent Portfolio License. If you use it for private purpose without interference with sensitive medical equipment. by the International Commission on Non-Ionizing Radiation Protection (ICNIRP), which is in laws and regulations). U.S. Re-export Regulations (Export Administration Regulations) is any profits, you are allowed to use them only when: collaboration with the World Health Organization (WHO), and the permissible limits include PETROL STATIONS applied to this product and its accessories. If you export or re-export this product or its • Recording videos that are compliant with the standard of MPEG-4 Visual (hereinafter a substantial safety margin designed to assure the safety of all persons, regardless of Obey all posted signs with respect to the use of wireless devices or other radio equipment accessories, please follow the necessary procedures at your own risk and expense. For referred to as MPEG-4 Video) age and health condition. in locations with flammable material and chemicals. Switch off your wireless device details on the procedures, contact the Ministry of Economy, Trade and Industry or the U.S. Department of Commerce. • Playing MPEG-4 Videos recorded personally by consumers not engaged in profit The Japanese technical regulations and international guidelines define the limits using whenever you are instructed to do so by authorized staff. activities a unit of measurement known as the Specific Absorption Rate (SAR), which represents • Playing MPEG-4 Video supplied from the provider licensed from MPEG-LA the average amount of radio frequency energy absorbed by the human. The SAR limit for INTERFERENCE Care must be taken when using the phone in close proximity to personal medical devices, Intellectual Property Right For further utilizing such as promotion, in-house use or profit- mobile phones is 2.0 W/kg. The highest SAR value for this mobile phone when tested for use at the ear is X.XXXW/kg. The highest SAR value for this mobile phone when tested such as pacemakers and hearing aids. making business, please contact MPEG LA, LLC in U.S. for use on the body is X.XXXW/kg. There may be slight differences in SAR levels among Pacemakers Trademarks • This product has been granted the licenses which code (i) AVC standard compliant individual products, but they all satisfy the limit. video (hereinafter stated as AVC video) based upon the AVC Portfolio License for The actual SAR of this mobile phone while talking on the phone can be well below that Pacemaker manufacturers recommend that a minimum separation of 15 cm be All company names and product names in this manual are the individual use of customers, and non-commercial use, and/or the licenses which indicated above. This is due to automatic changes in the power level of the mobile phone maintained between a mobile phone and a pacemaker to avoid potential interference with decode (ii) VC-1 video. (this is restricted to the AVC video that has been coded either trade marks or registered trade marks. to ensure it only outputs the minimum power required to communicate with a base the pacemaker. To achieve this use the phone on the opposite ear to your pacemaker and by customers who are not engaged in individual, and commercial activities, and/ do not carry it in a breast pocket. • The microSD logo, microSDHC logo, and microSDXC station. Therefore in general, the closer you are to a base station, the lower the power or pertains to the provision of coded AVC video from video providers who have been logo are trademarks of SD-3C, LLC. output of the mobile phone. granted the licenses). For any other purposes, licence is not permitted even for the Hearing Aids This mobile phone can be used in positions other than against your ear. Use an accessory implied usage. Additional information may be obtained from MPEG LA, LLC. Refer to Some digital wireless phones may interfere with some hearing aids. In the event of • Bluetooth® word mark and logos are registered trademarks owned such as a carrying case, etc. so that you can hold the product at least 1.5 cm away http://www.mpegla.com such interference, you may want to consult your hearing aid manufacturer to discuss by Bluetooth® SIG, INC. LG Electronics Inc. have the rights of using from your body and also do not contain metal parts between the product and your body. • This product has been granted the licenses which code (i) VC-1 standard compliant alternatives. the above trademarks. By doing this, this mobile phone complies with Japanese technical regulations and video (hereinafter stated as VC-1 video) based upon the VC-1 Patent Portfolio License international guidelines regarding exposure to radio waves. NOTE : Excessive sound pressure from earphones and headphones can cause for the individual use of customers, and non-commercial use, and/or the licenses • Wi-Fi is registered trademark of Wi-Fi Alliance . ® ® The World Health Organization has stated that present scientific information does not hearing loss. which decode (ii) VC-1 video. (this is restricted to the VC-1 video that has been coded indicate that use of mobile devices has any harmful effects on the human body. They • Google, the Google logo, Android, the Android logo, Google Play, the Google Play logo, by customers who are not engaged in individual, and commercial activities, and/or recommend that if you are still worried about your exposure then you can limit your talk  o prevent possible hearing damage, do not listen at high volume levels for T Google Talk, Gmail are trademarks of Google, Inc. pertains to the provision of coded VC-1 video from video providers who have been time or use a handsfree kit to keep the mobile phone away from your head and body. long periods. • iWnn of OMRON SOFTWARE CO., Ltd. is used for conversion methods for Japanese granted the licenses). For any other purposes, licence is not permitted even for the If you would like to know more detailed information, please refer to the WHO website. language. implied usage. Additional information may be obtained from MPEG LA, LLC. Refer to http://www.who.int/docstore/peh-emf/publications/facts_press/fact_english.htm iWnn© OMRON SOFTWARE Co., Ltd. 2008-2014 All Rights Reserved. http://www.mpegla.com Please refer to the websites listed below if you would like to know more detailed For other Medical Devices : • "Jibe" is a trademark of Jibe Mobile K.K. information regarding SAR. Please consult your physician and the device manufacturer to determine if operation of your phone may interfere with the operation of your medical device. • FeliCa is a contactless IC card technology developed by Sony Corporation. ○ Ministry of Internal Affairs and Communications Website: FeliCa is a registered trademark of Sony Corporation. http://www.tele.soumu.go.jp/j/ele/index.htm CAUTION • is a registered trademark of FeliCa Networks, Inc. RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. • GREE and the GREE logo are registered trademarks of GREE, Inc. in Japan. All other ○ Association of Radio Industries and Businesses Website: DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. trademarks are the property of their respective owners. http://www.arib-emf.org/index02.html (in Japanese only) • Rovi, G-GUIDE, G-GUIDE MOBILE and G-Guide related logos are trademarks registered ○ au Website: http://www.au.kddi.com/ FCC Notice trademarks of Rovi Corporation and/or its subsidiaries in Japan. • Copyright © 2010- Three Laws of Mobility. All Rights Reserved. ○ LG Electronics Inc. Website: This device complies with part 15 of the FCC Rules. Operation is subject to the following Refer to "Specifications" page of this product. two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired http://www.lg.com/jp/mobile-phone (in Japanese only) • Twitter is a trademark of Twitter, Inc., and is used under license. operation. (URL are subject to change without notice.) • Facebook and Facebook logo are trade marks or registered of Facebook, Inc. Note: * Technical regulations are defined by the Ministerial Ordinance Related to Radio Law This equipment has been tested and found to comply with the limits for a Class B digital • "mixi" and "mymixi" are trademark and/or registered trademark of mixi, Inc. (Article 14-2 of Radio Equipment Regulations). device, pursuant to part 15 of the FCC Rules. These limits are designed to provide • "TRENDMICRO", " ウイルスバスター " Copyright © 1989-2011 Trend Micro Incorporated. reasonable protection against harmful interference in a residential installation. This All rights reserved. Declaration of Conformity equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio • The product includes pictograms licensed by NTT DOCOMO, INC. communications. • Manufactured under license from DTS, Inc. DTS, the Symbol, & DTS and the The product "LGV32" is declared to conform with the essential requirements of European Symbol together are registered trademarks & DTS 2.0 is a trademark of DTS, Union Directive 1999/5/EC Radio and Telecommunications Terminal Equipment Directive However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which Inc. Product includes software. © DTS, Inc. All Rights Reserved. 3.1(a), 3.1(b) and 3.2. This mobile phone complies with the EU requirements for exposure to radio waves. can be determined by turning the equipment off and on, the user is encouraged to try to • Manufactured under license from Dolby Laboratories. Your mobile phone is a radio transceiver, designed and manufactured not to exceed the correct the interference by one or more of the following measures: Dolby and the double-D symbol are trademarks of Dolby Laboratories. SAR* limits** for exposure to radio-frequency (RF) energy, which SAR* value, when tested - Reorient or relocate the receiving antenna. for compliance against the standard was X.XXX W/kg at the ear, and X.XXX W/kg when - Increase the separation between the equipment and receiver. worn on the body. To comply with the RF Exposure limits a distance of greater than 1.5 - Connect the equipment into an outlet on circuit different from that to which the receiver • All other company names and product names are trademarks or registered trademarks cm must be maintained from the user's body. is connected. of respective companies referred to in this manual. While there may be differences between the SAR* levels of various phones and at various - Consult the dealer or an experienced radio/TV technician for help and for additional positions, they all meet*** the EU requirements for RF exposure. suggestions. OpenSSL License *The exposure standard for mobile phones employs a unit of measurement known as the Warning Specific Absorption Rate, or SAR. The user is cautioned that changes or modifications not expressly approved by the 【OpenSSL License】 **The SAR limit for mobile phones used by the public is 2.0 watts/kilogram (W/kg) manufacturer could void the user's authority to operate the equipment. Copyright © 1998-2011 The OpenSSL Project. All rights reserved. averaged over ten grams of tissue, recommended by The Council of the European Union. This product includes software developed by the OpenSSL Project The limit incorporates a substantial margin of safety to give additional protection for the FCC RF Exposure Information for use in the OpenSSL Toolkit. (http://www.openssl.org/) THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ''AS IS'' AND ANY public and to account for any variations in measurements. ***Tests for SAR have been conducted using standard operating positions with the phone This model phone is a radio transmitter and receiver. EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE transmitting at its highest certified power level in all tested frequency bands. Although It is designed and manufactured not to exceed the emission limits for exposure to radio IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR the SAR is determined at the highest certified power level, the actual SAR level of the frequency (RF) energy set by the Federal Communications Commission of the U.S. PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS phone while operating can be well below the maximum value. This is because the phone Government. CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, is designed to operate at multiple power levels so as to use only the power required to The guidelines are based on standards that were developed by independent scientific EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, reach the network. In general, the closer you are to a base station antenna, the lower organizations through periodic and thorough evaluation of scientific studies. The PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR the power output. standards include a substantial safety margin designed to assure the safety of all PROFITS; OR BUSINESS INTERRUPTION) persons, regardless of age and health. HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY European Union Directives Conformance Statement The exposure standard for wireless handsets employs a unit of measurement known as WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required SUCH DAMAGE. by the FCC for each model. 【Original SSLeay License】 The SAR value for this model handset when tested for use at the ear is X.XX W/kg and Copyright © 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved. Hereby, LG Electronics Inc. declares that this product is in compliance with: when worn on the body, as described in this user guide, is X.XX W/kg. This product includes cryptographic software written by Eric Young (eay@cryptsoft.com) • The essential requirements and other relevant provisions of Directive 1999/5/EC THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF • All other relevant EU Directives Body-worn Operation MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. The above gives an example of a typical Product Approval Number. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, This phone was tested for typical body-worn operations with the back of the phone kept INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES Wi-Fi(WLAN) This device is intended for sale in Japan only. at a distance of 10 mm from the body. To maintain compliance with FCC RF exposure This equipment may be operated in all European countries. (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR requirements, use accessories that maintain a 10 mm separation distance between your The 5150 - 5350 MHz band is restricted to indoor use only. SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) body and the back of the phone. The use of belt clips, holsters and similar accessories HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, should not contain metallic components. STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY The use of accessories that do not satisfy these requirements may not comply with FCC Important Safety Information RF exposure requirements, and should be avoided. WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. The FCC has granted an Equipment Authorization for this model handset with all reported AIRCRAFT SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR Switch off your wireless device when boarding an aircraft or whenever you are instructed information on this model handset is on file with the FCC and can be found under the to do so by airline staff. If your device offers a 'flight mode' or similar feature consult airline Display Grant section of http://www.fcc.gov/oet/ea/fccid/ after searching on FCC ID staff as to whether it can be used on board. ZNFV32.


Document Created: 2015-04-09 17:23:04
Document Modified: 2015-04-09 17:23:04
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC