SAR Appendix_B

FCC ID: ZNFUS991

RF Exposure Info

Download: PDF
FCCID_2599717

Test Laboratory: UL Verification Services Inc. SAR Lab A Date/Time: 4/3/2015 6:16:54 PM 20150403_SystemPerformanceCheck-D835V2 SN 4d002 Frequency: 835 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used: f = 835 MHz; σ = 0.991 S/m; εr = 53.029; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1357; Calibrated: 2/20/2015 - Probe: EX3DV4 - SN3901; ConvF(9.5, 9.5, 9.5); Calibrated: 1/27/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 (A); Type: QDOVA001BB; Serial: 1117 Body/Pin=100 mW/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.17 W/kg Body/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 34.88 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 1.45 W/kg SAR(1 g) = 0.977 W/kg; SAR(10 g) = 0.642 W/kg Maximum value of SAR (measured) = 1.19 W/kg 0 dB = 1.19 W/kg = 0.76 dBW/kg Plot No. 1

Test Laboratory: UL Verification Services Inc. SAR Lab A Date/Time: 4/3/2015 6:16:54 PM 20150403_SystemPerformanceCheck-D835V2 SN 4d002 Frequency: 835 MHz; Duty Cycle: 1:1 Body/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 1.17 W/kg Plot No. 2

Test Laboratory: UL Verification Services Inc. SAR Lab B Date/Time: 4/7/2015 10:14:16 AM 20150407_SystemPerformanceCheck-D2450V2 SN 706 Frequency: 2450 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used: f = 2450 MHz; σ = 2.021 S/m; εr = 51.123; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE3 Sn500; Calibrated: 5/15/2014 - Probe: EX3DV4 - SN3751; ConvF(6.47, 6.47, 6.47); Calibrated: 11/14/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 (A); Type: QDOVA001BB; Serial: 1117 Body/Pin=100 mW/Area Scan (8x8x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 6.14 W/kg Body/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 60.361 V/m; Power Drift = 0.11 dB Peak SAR (extrapolated) = 11.8 W/kg SAR(1 g) = 5.23 W/kg; SAR(10 g) = 2.3 W/kg Maximum value of SAR (measured) = 7.63 W/kg 0 dB = 7.63 W/kg = 8.83 dBW/kg Plot No. 3

Test Laboratory: UL Verification Services Inc. SAR Lab B Date/Time: 4/7/2015 10:34:23 AM 20150407_SystemPerformanceCheck-D2450V2 SN 706 Frequency: 2450 MHz; Duty Cycle: 1:1 Body/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 7.34 W/kg Plot No. 4

Test Laboratory: UL Verification Services Inc. SAR Lab E Date/Time: 4/13/2015 10:56:08 AM 20150413_SystemPerformanceCheck-D5GHzV2 SN 1138 Frequency: 5600 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used: f = 5600 MHz; σ = 5.931 S/m; εr = 48.223; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1257; Calibrated: 9/29/2014 - Probe: EX3DV4 - SN3772; ConvF(3.6, 3.6, 3.6); Calibrated: 2/23/2015; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI v5.0 B; Type: QDOVA002AA; Serial: 1180 Body/5.6 GHz, Pin=100mW/Area Scan (7x7x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 16.3 W/kg Body/5.6 GHz, Pin=100mW/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 47.024 V/m; Power Drift = -0.08 dB Peak SAR (extrapolated) = 37.7 W/kg SAR(1 g) = 8.76 W/kg; SAR(10 g) = 2.45 W/kg Maximum value of SAR (measured) = 21.5 W/kg 0 dB = 16.3 W/kg = 12.13 dBW/kg Plot No. 5

Test Laboratory: UL Verification Services Inc. SAR Lab E Date/Time: 4/13/2015 11:18:55 AM 20150413_SystemPerformanceCheck-D5GHzV2 SN 1138 Frequency: 5600 MHz; Duty Cycle: 1:1 Body/5.6 GHz, Pin=100mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 11.4 W/kg Plot No. 6

Test Laboratory: UL Verification Services Inc. SAR Lab E Date/Time: 4/16/2015 12:28:01 AM 20150416_SystemPerformanceCheck-D835V2 SN 4d002 Frequency: 835 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used: f = 835 MHz; σ = 0.885 S/m; εr = 40.948; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1257; Calibrated: 9/29/2014 - Probe: EX3DV4 - SN3772; ConvF(8.58, 8.58, 8.58); Calibrated: 2/23/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM with CRP; Type: SAM; Head/Pin=100 mW/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.15 W/kg Head/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 36.822 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 1.41 W/kg SAR(1 g) = 0.960 W/kg; SAR(10 g) = 0.633 W/kg Maximum value of SAR (measured) = 1.16 W/kg 0 dB = 1.16 W/kg = 0.64 dBW/kg Plot No. 7

Test Laboratory: UL Verification Services Inc. SAR Lab E Date/Time: 4/16/2015 12:46:37 AM 20150416_SystemPerformanceCheck-D835V2 SN 4d002 Frequency: 835 MHz; Duty Cycle: 1:1 Head/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 1.15 W/kg Plot No. 8

Test Laboratory: UL Verification Services Inc. SAR Lab F Date/Time: 4/6/2015 10:46:03 AM 20150406_SystemPerformanceCheck-D1750V2 SN 1050 Frequency: 1750 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used: f = 1750 MHz; σ = 1.508 S/m; εr = 52.142; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1359; Calibrated: 2/18/2015 - Probe: EX3DV4 - SN3936; ConvF(7.53, 7.53, 7.53); Calibrated: 7/24/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 (A); Type: QDOVA001BB; Serial: 1117 Body/Pin=100 mW/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 5.10 W/kg Body/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 58.674 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 7.05 W/kg SAR(1 g) = 3.89 W/kg; SAR(10 g) = 2.06 W/kg Maximum value of SAR (measured) = 5.20 W/kg 0 dB = 5.20 W/kg = 7.16 dBW/kg Plot No. 9

Test Laboratory: UL Verification Services Inc. SAR Lab F Date/Time: 4/6/2015 11:06:22 AM 20150406_SystemPerformanceCheck-D1750V2 SN 1050 Frequency: 1750 MHz; Duty Cycle: 1:1 Body/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 5.19 W/kg Plot No. 10

Test Laboratory: UL Verification Services Inc. SAR Lab F Date/Time: 4/9/2015 11:06:04 AM 20150409_SystemPerformanceCheck-D1900V2 SN 5d140 Frequency: 1900 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used: f = 1900 MHz; σ = 1.406 S/m; εr = 39.829; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1359; Calibrated: 2/18/2015 - Probe: EX3DV4 - SN3936; ConvF(7.61, 7.61, 7.61); Calibrated: 7/24/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM with CRP; Type: QD000P40CA; Serial: 1185 Head/Pin=100 mW/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 5.88 W/kg Head/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 64.846 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 8.17 W/kg SAR(1 g) = 4.25 W/kg; SAR(10 g) = 2.17 W/kg Maximum value of SAR (measured) = 5.81 W/kg 0 dB = 5.81 W/kg = 7.64 dBW/kg Plot No. 11

Test Laboratory: UL Verification Services Inc. SAR Lab F Date/Time: 4/9/2015 11:25:29 AM 20150409_SystemPerformanceCheck-D1900V2 SN 5d140 Frequency: 1900 MHz; Duty Cycle: 1:1 Head/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 5.85 W/kg Plot No. 12

Test Laboratory: UL Verification Services Inc. SAR Lab F Date/Time: 4/9/2015 1:04:16 PM 20150409_SystemPerformanceCheck-D1750V2 SN 1077 Frequency: 1750 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used: f = 1750 MHz; σ = 1.322 S/m; εr = 41.294; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1359; Calibrated: 2/18/2015 - Probe: EX3DV4 - SN3936; ConvF(7.84, 7.84, 7.84); Calibrated: 7/24/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM with CRP; Type: SAM; Head/Pin=100 mW/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 4.79 W/kg Head/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 57.199 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 6.84 W/kg SAR(1 g) = 3.71 W/kg; SAR(10 g) = 1.96 W/kg Maximum value of SAR (measured) = 4.98 W/kg 0 dB = 4.98 W/kg = 6.97 dBW/kg Plot No. 13

Test Laboratory: UL Verification Services Inc. SAR Lab F Date/Time: 4/9/2015 1:22:52 PM 20150409_SystemPerformanceCheck-D1750V2 SN 1077 Frequency: 1750 MHz; Duty Cycle: 1:1 Head/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 4.79 W/kg Plot No. 14

Test Laboratory: UL Verification Services Inc. SAR Lab F Date/Time: 4/13/2015 8:07:08 AM 20150413_SystemPerformanceCheck-D1900V2 SN 5d043 Frequency: 1900 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used: f = 1900 MHz; σ = 1.446 S/m; εr = 40.649; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1359; Calibrated: 2/18/2015 - Probe: EX3DV4 - SN3936; ConvF(7.61, 7.61, 7.61); Calibrated: 7/24/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM with CRP; Type: QD000P40CA; Serial: 1185 Head/Pin=100 mW/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 5.19 W/kg Head/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 60.106 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 7.31 W/kg SAR(1 g) = 3.81 W/kg; SAR(10 g) = 1.95 W/kg Maximum value of SAR (measured) = 5.18 W/kg 0 dB = 5.18 W/kg = 7.14 dBW/kg Plot No. 15

Test Laboratory: UL Verification Services Inc. SAR Lab F Date/Time: 4/13/2015 8:26:29 AM 20150413_SystemPerformanceCheck-D1900V2 SN 5d043 Frequency: 1900 MHz; Duty Cycle: 1:1 Head/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 5.19 W/kg Plot No. 16

Test Laboratory: UL Verification Services Inc. SAR Lab F Date/Time: 4/13/2015 9:35:40 AM 20150413_SystemPerformanceCheck-D5GHzV2 SN 1168 Frequency: 5200 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used: f = 5200 MHz; σ = 5.423 S/m; εr = 47.587; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1359; Calibrated: 2/18/2015 - Probe: EX3DV4 - SN3936; ConvF(4.42, 4.42, 4.42); Calibrated: 7/24/2014; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI v5.0 (B); Type: QDOVA001BB; Serial: 1118 Body/5.2 GHz, Pin=100mW/Area Scan (7x7x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 18.6 W/kg Body/5.2 GHz, Pin=100mW/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 51.726 V/m; Power Drift = -0.07 dB Peak SAR (extrapolated) = 33.8 W/kg SAR(1 g) = 8.07 W/kg; SAR(10 g) = 2.28 W/kg Maximum value of SAR (measured) = 18.7 W/kg 0 dB = 18.7 W/kg = 12.72 dBW/kg Plot No. 17

Test Laboratory: UL Verification Services Inc. SAR Lab F Date/Time: 4/13/2015 10:02:38 AM 20150413_SystemPerformanceCheck-D5GHzV2 SN 1168 Frequency: 5200 MHz; Duty Cycle: 1:1 Body/5.2 GHz, Pin=100mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 12.9 W/kg Plot No. 18

Test Laboratory: UL Verification Services Inc. SAR Lab F Date/Time: 4/13/2015 6:40:39 PM 20150413_SystemPerformanceCheck-D1750V2 SN 1053 Frequency: 1750 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used: f = 1750 MHz; σ = 1.328 S/m; εr = 39.157; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1359; Calibrated: 2/18/2015 - Probe: EX3DV4 - SN3936; ConvF(7.84, 7.84, 7.84); Calibrated: 7/24/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM with CRP; Type: QD000P40CA; Serial: 1185 Head/Pin=100 mW/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 4.76 W/kg Head/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 59.928 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 6.66 W/kg SAR(1 g) = 3.6 W/kg; SAR(10 g) = 1.9 W/kg Maximum value of SAR (measured) = 4.83 W/kg 0 dB = 4.83 W/kg = 6.84 dBW/kg Plot No. 19

Test Laboratory: UL Verification Services Inc. SAR Lab F Date/Time: 4/13/2015 7:00:02 PM 20150413_SystemPerformanceCheck-D1750V2 SN 1053 Frequency: 1750 MHz; Duty Cycle: 1:1 Head/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 4.74 W/kg Plot No. 20

Test Laboratory: UL Verification Services Inc. SAR Lab G Date/Time: 4/8/2015 8:04:44 PM 20150408_SystemPerformanceCheck-D750V3 SN 1071 Frequency: 750 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used: f = 750 MHz; σ = 0.973 S/m; εr = 54.655; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1433; Calibrated: 3/12/2015 - Probe: EX3DV4 - SN3686; ConvF(8.7, 8.7, 8.7); Calibrated: 2/23/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI A; Type: QDOVA002AA; Serial: 1258 Body/Pin=100 mW/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.09 W/kg Body/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 34.066 V/m; Power Drift = 0.15 dB Peak SAR (extrapolated) = 1.31 W/kg SAR(1 g) = 0.901 W/kg; SAR(10 g) = 0.600 W/kg Maximum value of SAR (measured) = 1.09 W/kg 0 dB = 1.09 W/kg = 0.37 dBW/kg Plot No. 21

Test Laboratory: UL Verification Services Inc. SAR Lab G Date/Time: 4/8/2015 8:22:30 PM 20150408_SystemPerformanceCheck-D750V3 SN 1071 Frequency: 750 MHz; Duty Cycle: 1:1 Body/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 1.09 W/kg Plot No. 22

Test Laboratory: UL Verification Services Inc. SAR Lab G Date/Time: 4/13/2015 6:56:32 PM 20150413_SystemPerformanceCheck-D5GHzV2 SN 1138 Frequency: 5600 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used: f = 5600 MHz; σ = 5.007 S/m; εr = 35.375; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1433; Calibrated: 3/12/2015 - Probe: EX3DV4 - SN3686; ConvF(4.06, 4.06, 4.06); Calibrated: 2/23/2015; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: SAM A; Type: SAM; Serial: 1831 Head/5.6 GHz, Pin=100mW/Area Scan (7x7x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 21.6 W/kg Head/5.6 GHz, Pin=100mW/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 57.760 V/m; Power Drift = 0.10 dB Peak SAR (extrapolated) = 36.7 W/kg SAR(1 g) = 8.73 W/kg; SAR(10 g) = 2.44 W/kg Maximum value of SAR (measured) = 21.0 W/kg 0 dB = 21.0 W/kg = 13.22 dBW/kg Plot No. 23

Test Laboratory: UL Verification Services Inc. SAR Lab G Date/Time: 4/13/2015 7:18:19 PM 20150413_SystemPerformanceCheck-D5GHzV2 SN 1138 Frequency: 5600 MHz; Duty Cycle: 1:1 Head/5.6 GHz, Pin=100mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 15.3 W/kg Plot No. 24

Test Laboratory: UL Verification Services Inc. SAR Lab H Date/Time: 4/2/2015 10:40:42 PM 20150402_SystemPerformanceCheck-D1900V2 SN 5d043 Frequency: 1900 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used: f = 1900 MHz; σ = 1.539 S/m; εr = 52.592; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1258; Calibrated: 5/15/2014 - Probe: EX3DV4 - SN3871; ConvF(7.77, 7.77, 7.77); Calibrated: 8/26/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 B; Type: QDOVA002AA; Serial: 1248 Body/Pin=100 mW/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 5.50 W/kg Body/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 60.467 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 7.38 W/kg SAR(1 g) = 4.06 W/kg; SAR(10 g) = 2.12 W/kg Maximum value of SAR (measured) = 5.49 W/kg 0 dB = 5.50 W/kg = 7.40 dBW/kg Plot No. 25

Test Laboratory: UL Verification Services Inc. SAR Lab H Date/Time: 4/2/2015 10:59:06 PM 20150402_SystemPerformanceCheck-D1900V2 SN 5d043 Frequency: 1900 MHz; Duty Cycle: 1:1 Body/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 5.51 W/kg Plot No. 26

Test Laboratory: UL Verification Services Inc. SAR Lab H Date/Time: 4/6/2015 11:39:48 AM 20150406_SystemPerformanceCheck-D835V2 SN 4d002 Frequency: 835 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used: f = 835 MHz; σ = 1.015 S/m; εr = 55.821; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1258; Calibrated: 5/15/2014 - Probe: EX3DV4 - SN3871; ConvF(9.59, 9.59, 9.59); Calibrated: 8/26/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 A; Type: SM 000 T01 DA; Serial: TP:1247 Body/Pin=100 mW/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.16 W/kg Body/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 35.341 V/m; Power Drift = -0.06 dB Peak SAR (extrapolated) = 1.42 W/kg SAR(1 g) = 0.978 W/kg; SAR(10 g) = 0.648 W/kg Maximum value of SAR (measured) = 1.18 W/kg 0 dB = 1.18 W/kg = 0.72 dBW/kg Plot No. 27

Test Laboratory: UL Verification Services Inc. SAR Lab H Date/Time: 4/6/2015 11:57:55 AM 20150406_SystemPerformanceCheck-D835V2 SN 4d002 Frequency: 835 MHz; Duty Cycle: 1:1 Body/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 1.17 W/kg Plot No. 28


Document Created: 2015-04-21 22:48:19
Document Modified: 2015-04-21 22:48:19
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC