HAC RF Appendix_F

FCC ID: ZNFUS991

Test Report

Download: PDF
FCCID_2599714

Calibration Laboratory of SS /¥ S Schweizerischer Kalibrierdienst « S Lo Schmid & Partner ii\ ww 2 . Service suisse d‘étalonnage Englneenng AG Tzul y 5 Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland ‘z,///;_\\\\? Swiss Calibration Service /l’IH|I\\“\\\ Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client UL CCS USA Certificate No: CD835V3—101 4_Feb1 5 CALIBRATION CERTIFICATE Object CD835V3 — SN: 1014 Calibration procedure(s) QA CAL—20.v6 Calibration procedure for dipoles in air Calibration date: February 18, 2015 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Power meter EPM—442A GB37480704 07—Oct—14 (No. 217—02020) Oct—15 Power sensor HP 8481A US37292783 07—Oct—14 (No. 217—02020) Oct—15 Power sensor HP 8481A MY41092317 07—Oct—14 (No. 217—02021) Oct—15 Reference 10 dB Attenuator SN: 5047.2 / 06327 03—Apr—14 (No. 217—01921) Apr—15 Probe ER3SDV6 SN: 2336 31—Dec—14 (No. ER3—2336_Dec14) Dec—15 Probe H3DV6 SN: 6065 31—Dec—14 (No. H3—6065_Dec14) Dec—15 DAE4 SN: 781 12—Sep—14 (No. DAE4—781_Sep14) Sep—15 Secondary Standards ID # Check Date (in house) Scheduled Check Power meter Agilent 4419B SN: GB42420191 09—Oct—09 (in house check Sep—14) in house check: Sep—16 Power sensor HP E4412A SN: US38485102 O5—Jan—10 (in house check Sep—14) In house check: Sep—16 Power sensor HP 8482A SN: US37295597 09—Oct—09 (in house check Sep—14) In house check: Sep—16 Network Analyzer HP 8753E US37390585 18—Oct—01 (in house check Oct—14) In house check: Oct—15 RF generator R&S SM1T—06 SN: 832283/011 27—Aug—12 (in house check Oct—13) In house check: Oct—16 Name Function Signature Calibrated by: Leif Klysner Laboratory Technician Approved by: Fin Bomholt Deputy Technical Manager 3 / % f’ ze 2’/’/ Issued: February 19, 2015 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: CD835V3—1014_Feb15 Page 1 of 5

Calibration Laboratery of Schweizerischer Kalibrierdienst Schmid & Partner Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates References [1] ANSI—C63.19—2011 American National Standard, Methods of Measurement of Compatibility between Wireless Communications Devices and Hearing Aids. Methods Applied and Interpretation of Parameters: * Coordinate System: y—axis is in the direction of the dipole arms. z—axis is from the basis of the antenna (mounted on the table) towards its feed point between the two dipole arms. x—axis is normal to the other axes. In coincidence with the standards [1], the measurement planes (probe sensor center) are selected to be at a distance of 15 mm above the top metal edge of the dipole arms. e Measurement Conditions: Further details are available from the hardcopies at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. The forward power to the dipole connector is set with a calibrated power meter connected and monitored with an auxiliary power meter connected to a directional coupler. While the dipole under test is connected, the forward power is adjusted to the same level. « Antenna Positioning: The dipole is mounted on a HAC Test Arch phantom using the matching dipole positioner with the arms horizontal and the feeding cable coming from the floor. The measurements are performed in a shielded room with absorbers around the setup to reduce the reflections. It is verified before the mounting of the dipole under the Test Arch phantom, that its arms are perfectly in a line. It is installed on the HAC dipole positioner with its arms parallel below the dielectric reference wire and able to move elastically in vertical direction without changing its relative position to the top center of the Test Arch phantom. The vertical distance to the probe is adjusted after dipole mounting with a DASYS Surface Check job. Before the measurement, the distance between phantom surface and probe tip is verified. The proper measurement distance is selected by choosing the matching section of the HAC Test Arch phantom with the proper device reference point (upper surface of the dipole) and the matching grid reference point (tip of the probe) considering the probe sensor offset. The vertical distance to the probe is essential for the accuracy. e Feed Point Impedance and Return Loss: These parameters are measured using a HP 8753E Vector Network Analyzer. The impedance is specified at the SMA connector of the dipole. The influence of reflections was eliminating by applying the averaging function while moving the dipole in the air, at least 70cm away from any obstacles. * E—field distribution: E field is measured in the x—y—plane with an isotropic ER3D—field probe with 100 mW forward power to the antenna feed point. In accordance with [1], the scan area is 20mm wide, its length exceeds the dipole arm length (180 or 9O0mm). The sensor center is 15 mm (in z) above the metal top of the dipole arms. Two 3D maxima are available near the end of the dipole arms. Assuming the dipole arms are perfectly in one line, the average of these two maxima (in subgrid 2 and subgrid 8) is determined to compensate for any non—parallelity to the measurement plane as well as the sensor displacement. The E—field value stated as calibration value represents the maximum of the interpolated 3D—E—field, in the plane above the dipole surface. The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. Certificate No: CD835V3—1014_Feb15 Page 2 of 5

Measurement Conditions DASY system configuration, as far as not given on page 1. DASY Version DASY5 V52.8.8 Phantom HAC Test Arch Distance Dipole Top — Probe Center 15mm Scan resolution dx, dy = 5 mm Frequency 835 MHz + 1 MHz Input power drift <0.05 dB Maximum Field values at 835 MHz E—field 15 mm above dipole surface condition Interpolated maximum Maximum measured above high end 100 mW input power 106.4 V/m = 40.54 dBV/m Maximum measured above low end 100 mW input power 106.4 V/m = 40.54 dBV/m Averaged maximum above arm 100 mW input power 106.4 V/im + 12.8 % (k=2) Appendix (Additional assessments outside the scope of SCS0108) Antenna Parameters Frequency Return Loss Impedance 800 MHz 17.8 dB 43.9 Q — 10.6 jQ 835 MHz 30.7 dB 50.1 Q + 2.9 jQ 900 MHz 16.9 dB 53.6 Q — 14.4 jQ 950 MHz 20.4 dB 43.9 Q + 6.5 jQ 960 MHz 16.2 dB 49.2 Q + 15.6 jQ 3.2 Antenna Design and Handling The calibration dipole has a symmetric geometry with a built—in two stub matching network, which leads to the enhanced bandwidth. The dipole is built of standard semirigid coaxial cable. The internal matching line is open ended. The antenna is therefore open for DC signals. Do not apply force to dipole arms, as they are liable to bend. The soldered connections near the feedpoint may be damaged. After excessive mechanical stress or overheating, check the impedance characteristics to ensure that the internal matching network is not affected. After long term use with 40W radiated power, only a slight warming of the dipole near the feedpoint can be measured. Certificate No: CD835V3—1014_Feb15 Page 3 of 5

Impedance Measurement Plot 18 Feb 2015 @8:58:08 CH1 S11 LOG 5 dB/ REF —15 dB 2:—30.749 dB 835.000 Abd MHz CH1 Markers 1:—17.768 dB Cor 3a0.000 MHz 3:—16.938 dR 900.000 MHz 41—20.427 dB 950.000 MHz Avg 15 S:—16.184 dB 960.000 MHz H1d CH2] S11 1 U FS 21 S0.141 o 28984 a 552.46 pH $35.000 D00 MHz Del CH2 Markers 11 43.936 a Cor —190.613 & 800.000 MHz 3: 53.604 o ~14.436 a 9990.000 MHz Av 41 43.875 16 2 6.5371 ¢ 950.000 MHz S: 49.188 o H1d 15.559 ¢ 960.000 MHz START 335.000 900 MHz STOP 1 335.000 900 MHz Certificate No: CD835V3—1014_Feb15 Page 4 of 5

DASY5 E—field Result Date: 17.02.2015 Test Laboratory: SPEAG Lab2 DUT: HAC—Dipole 835 MHz; Type: CD835V3; Serial: CD835V3 — SN: 1014 Communication System: UID 0 — CW ; Frequency: 835 MHz Medium parameters used: 0 = 0 S/m, g, = 1; p = 1000 kg/m?‘ Phantom section: RF Section Measurement Standard: DASYS5 (IEEE/IEC/ANSI €63.19—2011) DASY52 Configuration: * Probe: ER3DV6 — SN2336; ConvF(1, 1, 1); Calibrated: 31.12.2014; Sensor—Surface: (Fix Surface) o Electronics: DAE4 Sn781; Calibrated: 12.09.2014 # Phantom: HAC Test Arch with AMCC; Type: SD HAC PO1 BA; Serial: 1070 e DASY52 52.8.8{1222); SEMCAD X 14.6.10(7331) Dipole E—Field measurement @ 835MHz/E—Scan — 835MHz d=15mm/Hearing Aid Compatibility Test (41x361x1): Interpolated grid: dx=0.5000 mm, dy=0.5000 mm Device Reference Point: 0, 0, —6.3 mm Reference Value = 120.9 V/m; Power Drift = 0.01 dB Applied MIF = 0.00 dB RF audio interference level = 40.54 dBV/m Emission category: M3 MIF scaled E—field Grid 4 M4 35.61 dBV/m 40.19 dBV/m|40.54 dBV/m|40.51 dBV/m ~1.87 ~3.74 —5.62 —7.49 —9.36 0 dB = 106.4 V/m = 40.54 dBV/m Certificate No: CD835V3—1014_Feb15 Page 5 of 5

Calibration Laboratory of &8 y tope I4 7/ Schweizerischer Kalibrierdienst p 1t & Schmid & Partner 8 mc« 47 C Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura o swhl *, !nf Zeughausstrasse 43, 8004 Zurich, Switzeriland L/NS S Swiss Calibration Service Ahijuls® Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates fSltent UL CCS USA Certificate No: CD1880V3—1122_Feb15 CALIBRATION CERTIFICATE nndeced Object CD1880V3 — SN: 1122 Calibration procedure(s) QA CAL—20.v6 Calibration procedure for dipoles in air Calibration date: February 17, 2015 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (Sl). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Power meter EPM—442A GB37480704 07—Oct—14 (No. 217—02020) Oct—15 Power sensor HP 8481A US37292783 07—Oct—14 (No. 217—02020) Oct—15 Power sensor HP 8481A MY41092317 07—Oct—14 (No. 217—02021) Oct—15 Reference 10 dB Attenuator SN: 5047.2 / 06327 03—Apr—14 (No. 217—01921) Apr—15 Probe ER3DV6 SN: 2336 31—Dec—14 (No. ER3—2336_Dec14) Dec—15 Probe H3DV6 SN: 6065 31—Dec—14 (No. H3—6065_Dec14) Dec—15 DAE4 SN: 781 12—Sep—14 (No. DAE4—781_Sep14) Sep—15 Secondary Standards ID # Check Date (in house) Scheduled Check Power meter Agilent 4419B SN: GB42420191 09—Oct—09 (in house check Sep—14) In house check: Sep—16 Power sensor HP E4412A SN: US38485102 OS5—Jan—10 (in house check Sep—14) In house check: Sep—16 Power sensor HP 8482A SN: US37295597 09—Oct—09 (in house check Sep—14) In house check: Sep—16 Network Analyzer HP 8753E US37390585 18—Oct—01 (in house check Oct—14) In house check: Oct—15 RF generator R&S SMT—O6 SN: 832283/011 27—Aug—12 (in house check Oct—13) In house check: Oct—16 Name Function ooo Calibrated by: Leif Klysner Laboratory Technician Approved by: Fin Bomholt Deputy Technical Manager —{ammtono— Issued: February 19, 2015 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: CD1880V3—1122_Feb15 Page 1 of 7

Calibration Laboratory of Schweizerischer Kalibrierdienst Schmid & Partner Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Muitilateral Agreement for the recognition of calibration certificates References {1] ANSI—C63.19—2011 American National Standard, Methods of Measurement of Compatibility between Wireless Communications Devices and Hearing Aids. Methods Applied and Interpretation of Parameters: e Coordinate System: y—axis is in the direction of the dipole arms. z—axis is from the basis of the antenna {mounted on the table) towards its feed point between the two dipole arms. x—axis is normal to the other axes. In coincidence with the standards [1], the measurement planes (probe sensor center) are selected to be at a distance of 15 mm above the top metal edge of the dipole arms. e Measurement Conditions: Further details are available from the hardcopies at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. The forward power to the dipole connector is set with a calibrated power meter connected and monitored with an auxiliary power meter connected to a directional coupler. While the dipole under test is connected, the forward power is adjusted to the same level. * Antenna Positioning: The dipole is mounted on a HAC Test Arch phantom using the matching dipole positioner with the arms horizontal and the feeding cable coming from the floor. The measurements are performed in a shielded room with absorbers around the setup to reduce the reflections. It is verified before the mounting of the dipole under the Test Arch phantom, that its arms are perfectly in a line. It is installed on the HAC dipole positioner with its arms parallel below the dielectric reference wire and able to move elastically in vertical direction without changing its relative position to the top center of the Test Arch phantom. The vertical distance to the probe is adjusted after dipole mounting with a DASYS Surface Check job. Before the measurement, the distance between phantom surface and probe tip is verified. The proper measurement distance is selected by choosing the matching section of the HAC Test Arch phantom with the proper device reference point (upper surface of the dipole) and the matching grid reference point (tip of the probe) considering the probe sensor offset. The vertical distance to the probe is essential for the accuracy. s Feed Point Impedance and Return Loss: These parameters are measured using a HP 8753E Vector Network Analyzer. The impedance is specified at the SMA connector of the dipole. The influence of reflections was eliminating by applying the averaging function while moving the dipole in the air, at least 70cm away from any obstacles. * E—field distribution: E field is measured in the x—y—plane with an isotropic ER3D—field probe with 100 mW forward power to the antenna feed point. In accordance with [1], the scan area is 20mm wide, its length exceeds the dipole arm length (180 or 9O0mm). The sensor center is 15 mm (in z) above the metal top of the dipole arms. Two 3D maxima are available near the end of the dipole arms. Assuming the dipole arms are perfectly in one line, the average of these two maxima (in subgrid 2 and subgrid 8) is determined to compensate for any non—parallelity to the measurement plane as well as the sensor displacement. The E—field value stated as calibration value represents the maximum of the interpolated 3D—E—field, in the plane above the dipole surface. The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. Certificate No: CD1880V3—1122_Feb15 Page 2 of 7

Measurement Conditions DASYsystem configuration, as far as not given on page 1. DASY Version DASY5 V52.8.8 Phantom HAC Test Arch Distance Dipole Top — Probe Center 15 mm Scan resolution dx, dy = 5 mm 1730 MHz +1 MHz prequency 1880 MHz + 1 MHz Input power drift <0.05 dB Maximum Field values at 1730 MHz E—field 15 mm above dipole surface condition Interpolated maximum Maximum measured above high end 100 mW input power 98.9 V/m = 39.91 dBV/m Maximum measured above low end 100 mW input power 93.6 V/m = 39.43 dBV/m Averaged maximum above arm 100 mW input power 96.3 V/im + 12.8 % (k=2) Maximum Field values at 1880 MHz E—field 15 mm above dipole surface condition Interpolated maximum Maximum measured above high end 100 mW input power 89.2 V/m = 39.01 dBV/m Maximum measured above low end 100 mW input power 88.6 V/m = 38.95 dBV/m Averaged maximum above arm 100 mW input power 88.9 V/im + 12.8 % (k=2) Certificate No: CD1880V3—1122_Feb15 Page 3 of 7

Appendix (Additional assessments outside the scope of SCS0108) Antenna Parameters Nominal Frequencies Frequency Return Loss Impedance 1730 MHz 32.9 dB 51.4 Q + 1.8 jQ 1880 MHz 19.3 dB 45.5 Q + 9.3 jQ 1900 MHz 19.8 dB 48.3 . + 10.0 jQ 1950 MHz 26.4 dB 52.1 Q + 4.5 jQ 2000 MHz 21.1 dB 42.7 Q + 3.6 jQ 3.2 Antenna Design and Handling The calibration dipole has a symmetric geometry with a built—in two stub matching network, which leads to the enhanced bandwidth. The dipole is built of standard semirigid coaxial cable. The internal matching line is open ended. The antenna is therefore open for DC signals. Do not apply force to dipole arms, as they are liable to bend. The soldered connections near the feedpoint may be damaged. After excessive mechanical stress or overheating, check the impedance characteristics to ensure that the internal matching network is not affected. After long term use with 40W radiated power, only a slight warming of the dipole near the feedpoint can be measured. Certificate No: CD1880V3—1122_Feb15 Page 4 of 7

Impedarnice Measurement Plot 18 Feb 2015 @9:06:21 CHB Ss11i LoOG 5 dB—/REF —18 dB 2i—19.319 dB 1 880.000 oo MHz CH1 Markers 1:—32.947 dB Cor 1.73008 6Hz 3:—19,.789 dR 1.90000 6Hz 4:i—26.364 dB 1.35000 GHz Av 159 S—21.097 dB 2.00000 GHz $11 1 U FS 21 45.469 a 9.3359 a 7990.35 pH 1 880.000 900 MHz Del CH2 Markers 1: 51.422 a Cor Aw 16 H1d CENTER 1 880.000 080 MHz SPAN 1 0090.000 000 MHz Certificate No: CD1880V3—1122_Feb15 Page 5 of 7

DASY5 E—field Result Date: 17.02.2015 Test Laboratory: SPEAG Lab2 DUT: HAC Dipole 1880 MHz; Type: CD1880V3; Serial: CD1880V3 — SN: 1122 Communication System: UID 0 — CW ; Frequency: 1880 MHz, Frequency: 1730 MHz Medium parameters used: 0 = 0 S/m, &, = 1; p = 1000 kg/m" Phantom section: RF Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19—2011) DASY52 Configuration: e Probe: ER3DV6 — SN2336; ConvF(1, 1, 1); Calibrated: 31.12.2014; e Sensor—Surface: (Fix Surface) * Electronics: DAE4 Sn781; Calibrated: 12.09.2014 * Phantom: HAC Test Arch with AMCC; Type: SD HAC PO1 BA; Serial: 1070 * DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Dipole E—Field measurement/E—Scan — 1880MHz d=15mm/Hearing Aid Compatibility Test (41x181x1): Interpolated grid: dx=0.5000 mm, dy=0.5000 mm Device Reference Point: 0, 0, —6.3 mm Reference Value = 142.3 V/m; Power Drift = —0.02 dB Applied MIF = 0.00 dB RF audio interference level = 39.01 dBV/m Emission category: M2 MIF scaled E—field Grid 1 M2 Grid 3 M2 38.57 dBV/m|38.95 dBV/m|38.88 dBV/m Grid 4 M2 Grid 6 M2 36.44 dBV/m 36.74 dBV/m Grid 7 M2 38.72 dBV/m[39.01 dBV/m|38.95 dBV/m Certificate No: CD1880V3—1122_Feb15 Page 6 of 7

Dipole E—Field measurement/E—Scan — 1730MHz d=15mm/Hearing Aid Compatibility Test (41x181x1): Interpolated grid: dx=0.5000 mm, dy=0.5000 mm Device Reference Point: 0, 0, —6.3 mm Reference Value = 156.9 V/m; Power Drift = —0.01 dB Applied MIF = 0.00 dB RF audio interference level = 39.91 dBV/m Emission category: M2 MIF scaled E—field Grid 1 M2 Grid 3 M2 39.05 dBV/m|39.43 dBV/m|39.37 dBV/m Grid 4 M2 Grid 6 M2 37.46 dBV/m 37.91 dBV/m Grid 7 M2 _ 39.53 dBV/m|39.91 dBV/m|39.88 dBV/m —0.99 —1.99 —2.98 —3.98 ~4.97 0 dB = 89.19 V/m = 39.01 dBV/m Certificate No: CD1880V3—1122_Feb15 Page 7 of 7


Document Created: 2015-04-10 17:37:50
Document Modified: 2015-04-10 17:37:50
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC