SAR Plots Appendix B Rev A

FCC ID: ZNFUS550

RF Exposure Info

Download: PDF
FCCID_2515621

Test Laboratory: UL Verification Services Inc., SAR Lab 3 Date/Time: 12/11/2014 10:07:36 PM CDMA BC0 Frequency: 836.52 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 836.52 MHz; σ = 0.914 S/m; ε r = 40.508; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1380; Calibrated: 7/23/2014 - Probe: EX3DV4 - SN3773; ConvF(8.91, 8.91, 8.91); Calibrated: 4/22/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM with CRP; Type: SAM; RHS/Touch_ 1xEVDO_Rel.0_ch 384/Area Scan (7x12x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.0932 W/kg RHS/Touch_ 1xEVDO_Rel.0_ch 384/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 10.31 V/m; Power Drift = 0.12 dB Peak SAR (extrapolated) = 0.106 W/kg SAR(1 g) = 0.084 W/kg; SAR(10 g) = 0.064 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.0943 W/kg 0 dB = 0.0943 W/kg = -10.25 dBW/kg Plot No. 1

Test Laboratory: UL Verification Services Inc., SAR Lab 3 Date/Time: 12/12/2014 1:16:47 AM CDMA BC0 Frequency: 836.52 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 836.52 MHz; σ = 1.016 S/m; ε r = 52.918; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1380; Calibrated: 7/23/2014 - Probe: EX3DV4 - SN3773; ConvF(8.77, 8.77, 8.77); Calibrated: 4/22/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 (A); Type: QDOVA001BB; Serial: 1213 Rear/1xRTT_RC3 SO32_ch 384/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.229 W/kg Rear/1xRTT_RC3 SO32_ch 384/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 15.15 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 0.321 W/kg SAR(1 g) = 0.192 W/kg; SAR(10 g) = 0.117 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.244 W/kg 0 dB = 0.244 W/kg = -6.13 dBW/kg Plot No. 2

Test Laboratory: UL Verification Services Inc., SAR Lab 4 Date/Time: 12/19/2014 9:51:54 PM CDMA BC1 Frequency: 1908.75 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used: f = 1880 MHz; σ = 1.365 S/m; εr = 39.683; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1377; Calibrated: 8/27/2014 - Probe: EX3DV4 - SN3929; ConvF(7.23, 7.23, 7.23); Calibrated: 5/9/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM with CRP; Type: QD000P40CD; Serial: 1768 LHS/Touch_ 1xEVDO_Rel.0_ch 1175/Area Scan (7x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.18 W/kg LHS/Touch_ 1xEVDO_Rel.0_ch 1175/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 29.77 V/m; Power Drift = 0.18 dB Peak SAR (extrapolated) = 1.56 W/kg SAR(1 g) = 1 W/kg; SAR(10 g) = 0.617 W/kg Maximum value of SAR (measured) = 1.25 W/kg 0 dB = 1.25 W/kg = 0.97 dBW/kg Plot No. 3

Test Laboratory: UL Verification Services Inc., SAR Lab 4 Date/Time: 12/19/2014 1:52:03 PM CDMA BC1 Frequency: 1908.75 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 1908.75 MHz; σ = 1.53 S/m; ε r = 51.848; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1377; Calibrated: 8/27/2014 - Probe: EX3DV4 - SN3929; ConvF(7.25, 7.25, 7.25); Calibrated: 5/9/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI-B V5.0; Type: QDOVA001BB; Serial: S/n:1216 Rear/1xRTT_RC3 SO32_ch 1175/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.49 W/kg Rear/1xRTT_RC3 SO32_ch 1175/Zoom Scan (8x7x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 31.58 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 1.96 W/kg SAR(1 g) = 1.28 W/kg; SAR(10 g) = 0.815 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.56 W/kg 0 dB = 1.56 W/kg = 1.93 dBW/kg Plot No. 4

Test Laboratory: UL Verification Services Inc., SAR Lab 4 Date/Time: 12/19/2014 5:54:06 PM CDMA BC1 Frequency: 1851.25 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 1851.25 MHz; σ = 1.468 S/m; ε r = 52.059; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1377; Calibrated: 8/27/2014 - Probe: EX3DV4 - SN3929; ConvF(7.25, 7.25, 7.25); Calibrated: 5/9/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI-B V5.0; Type: QDOVA001BB; Serial: S/n:1216 Rear/1xEVDO_Rel.0_ch 25/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.28 W/kg Rear/1xEVDO_Rel.0_ch 25/Zoom Scan (7x6x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 30.21 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 1.66 W/kg SAR(1 g) = 1.09 W/kg; SAR(10 g) = 0.700 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.31 W/kg 0 dB = 1.31 W/kg = 1.17 dBW/kg Plot No. 5

Test Laboratory: UL Verification Services Inc., SAR Lab 4 Date/Time: 12/19/2014 6:40:25 PM CDMA BC1 Frequency: 1851.25 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 1851.25 MHz; σ = 1.468 S/m; εr = 52.059; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1377; Calibrated: 8/27/2014 - Probe: EX3DV4 - SN3929; ConvF(7.25, 7.25, 7.25); Calibrated: 5/9/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI-B V5.0; Type: QDOVA001BB; Serial: S/n:1216 Rear/1xEVDO_Rel.A_ch 25/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.31 W/kg Rear/1xEVDO_Rel.A_ch 25/Zoom Scan (6x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 30.28 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 1.67 W/kg SAR(1 g) = 1.09 W/kg; SAR(10 g) = 0.700 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.32 W/kg 0 dB = 1.32 W/kg = 1.21 dBW/kg Plot No. 6

Test Laboratory: UL Verification Services Inc., SAR Lab 4 Date/Time: 12/13/2014 6:23:47 AM LTE Band 2 Frequency: 1880 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used: f = 1880 MHz; σ = 1.358 S/m; εr = 40.39; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1377; Calibrated: 8/27/2014 - Probe: EX3DV4 - SN3929; ConvF(7.23, 7.23, 7.23); Calibrated: 5/9/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM with CRP; Type: QD000P40CD; Serial: 1768 LHS/Touch_QPSK RB 1,0_ch 18900/Area Scan (7x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.668 W/kg LHS/Touch_QPSK RB 1,0_ch 18900/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 22.82 V/m; Power Drift = -0.13 dB Peak SAR (extrapolated) = 0.932 W/kg SAR(1 g) = 0.615 W/kg; SAR(10 g) = 0.380 W/kg Maximum value of SAR (measured) = 0.747 W/kg 0 dB = 0.747 W/kg = -1.27 dBW/kg Plot No. 7

Test Laboratory: UL Verification Services Inc., SAR Lab 4 Date/Time: 12/13/2014 3:59:49 AM LTE Band 2 Frequency: 1880 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used: f = 1880 MHz; σ = 1.496 S/m; εr = 52.117; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1377; Calibrated: 8/27/2014 - Probe: EX3DV4 - SN3929; ConvF(7.25, 7.25, 7.25); Calibrated: 5/9/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI-B V5.0; Type: QDOVA001BB; Serial: S/n:1216 Rear/QPSK RB 1,0_ch 18900/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.797 W/kg Rear/QPSK RB 1,0_ch 18900/Zoom Scan (6x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 23.22 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 1.10 W/kg SAR(1 g) = 0.681 W/kg; SAR(10 g) = 0.438 W/kg Maximum value of SAR (measured) = 0.832 W/kg 0 dB = 0.832 W/kg = -0.80 dBW/kg Plot No. 8

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date/Time: 1/5/2015 1:19:53 PM LTE Band 4 Frequency: 1732.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 1732.5 MHz; σ = 1.366 S/m; εr = 39.228; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1359; Calibrated: 2/17/2014 - Probe: EX3DV4 - SN3871; ConvF(8.42, 8.42, 8.42); Calibrated: 8/26/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM with CRP; Type: SAM; LHS/Touch_QPSK RB 1/0_ch 20175/Area Scan (7x12x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.408 W/kg LHS/Touch_QPSK RB 1/0_ch 20175/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 17.713 V/m; Power Drift = -0.07 dB Peak SAR (extrapolated) = 0.548 W/kg SAR(1 g) = 0.359 W/kg; SAR(10 g) = 0.227 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.441 W/kg 0 dB = 0.441 W/kg = -3.56 dBW/kg Plot No. 9

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date/Time: 1/5/2015 4:26:34 PM LTE Band 4 Frequency: 1732.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 1732.5 MHz; σ = 1.488 S/m; εr = 51.067; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1359; Calibrated: 2/17/2014 - Probe: EX3DV4 - SN3871; ConvF(8.05, 8.05, 8.05); Calibrated: 8/26/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI A v5.0; Type: QDOVA002AA; Serial: S/n:1198 Rear/QPSK RB 1/0_ch 20175/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.805 W/kg Rear/QPSK RB 1/0_ch 20175/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 23.391 V/m; Power Drift = -0.14 dB Peak SAR (extrapolated) = 1.28 W/kg SAR(1 g) = 0.765 W/kg; SAR(10 g) = 0.456 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.994 W/kg 0 dB = 0.994 W/kg = -0.03 dBW/kg Plot No. 10

Test Laboratory: UL Verification Services Inc., SAR Lab 4 Date/Time: 12/18/2014 1:19:43 AM LTE Band 5 Frequency: 836.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 836.5 MHz; σ = 0.913 S/m; εr = 42.095; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1377; Calibrated: 8/27/2014 - Probe: EX3DV4 - SN3929; ConvF(9.01, 9.01, 9.01); Calibrated: 5/9/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM with CRP; Type: QD000P40CD; Serial: 1768 RHS/Touch_QPSK RB 1/24_ch 20525/Area Scan (7x12x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.503 W/kg RHS/Touch_QPSK RB 1/24_ch 20525/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 22.61 V/m; Power Drift = 0.08 dB Peak SAR (extrapolated) = 0.581 W/kg SAR(1 g) = 0.444 W/kg; SAR(10 g) = 0.339 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.489 W/kg 0 dB = 0.489 W/kg = -3.11 dBW/kg Plot No. 11

Test Laboratory: UL Verification Services Inc., SAR Lab 4 Date/Time: 12/17/2014 8:52:26 PM LTE Band 5 Frequency: 836.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 836.5 MHz; σ = 1.006 S/m; εr = 53.327; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1377; Calibrated: 8/27/2014 - Probe: EX3DV4 - SN3929; ConvF(9.21, 9.21, 9.21); Calibrated: 5/9/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI A (v5.0); Type: QDOVA001BB; Serial: S/n:1212 Rear/QPSK RB 1/24_ch 20525/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.630 W/kg Rear/QPSK RB 1/24_ch 20525/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 24.51 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 0.894 W/kg SAR(1 g) = 0.601 W/kg; SAR(10 g) = 0.436 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.761 W/kg 0 dB = 0.761 W/kg = -1.19 dBW/kg Plot No. 12

Test Laboratory: UL Verification Services Inc., SAR Lab 1 Date/Time: 12/18/2014 11:06:09 AM LTE Band 12 Frequency: 707.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 707.5 MHz; σ = 0.894 S/m; εr = 42.093; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE3 Sn427; Calibrated: 1/21/2014 - Probe: EX3DV4 - SN3902; ConvF(10.36, 10.36, 10.36); Calibrated: 5/19/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM; Type: QD000P40CD; Serial: TP 1751 RHS/Touch_QPSK RB 1/24_ch 23095/Area Scan (7x12x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.263 W/kg RHS/Touch_QPSK RB 1/24_ch 23095/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 16.375 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 0.335 W/kg SAR(1 g) = 0.227 W/kg; SAR(10 g) = 0.169 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.289 W/kg 0 dB = 0.289 W/kg = -5.39 dBW/kg Plot No. 13

Test Laboratory: UL Verification Services Inc., SAR Lab 1 Date/Time: 12/18/2014 1:10:04 PM LTE Band 12 Frequency: 707.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 707.5 MHz; σ = 0.931 S/m; εr = 53.819; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE3 Sn427; Calibrated: 1/21/2014 - Probe: EX3DV4 - SN3902; ConvF(9.9, 9.9, 9.9); Calibrated: 5/19/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI-A v5.0; Type: QDOVA002AA; Serial: TP 1194 Rear/QPSK RB 1/24_ch 23095/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.441 W/kg Rear/QPSK RB 1/24_ch 23095/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 22.332 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 0.594 W/kg SAR(1 g) = 0.373 W/kg; SAR(10 g) = 0.244 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.482 W/kg 0 dB = 0.482 W/kg = -3.17 dBW/kg Plot No. 14

Test Laboratory: UL Verification Services Inc., SAR Lab 4 Date/Time: 12/18/2014 4:23:51 PM LTE Band 25 Frequency: 1912.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 1912.5 MHz; σ = 1.412 S/m; εr = 38.714; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1377; Calibrated: 8/27/2014 - Probe: EX3DV4 - SN3929; ConvF(6.95, 6.95, 6.95); Calibrated: 5/9/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM with CRP; Type: QD000P40CD; Serial: 1768 LHS/Touch_QPSK RB 1,12_ch 26665/Area Scan (7x12x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.897 W/kg LHS/Touch_QPSK RB 1,12_ch 26665/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 23.27 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 1.20 W/kg SAR(1 g) = 0.778 W/kg; SAR(10 g) = 0.466 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.927 W/kg 0 dB = 0.927 W/kg = -0.33 dBW/kg Plot No. 15

Test Laboratory: UL Verification Services Inc., SAR Lab 4 Date/Time: 12/18/2014 7:13:51 PM LTE Band 25 Frequency: 1912.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 1912.5 MHz; σ = 1.531 S/m; εr = 51.715; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1377; Calibrated: 8/27/2014 - Probe: EX3DV4 - SN3929; ConvF(7.45, 7.45, 7.45); Calibrated: 5/9/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI-B V5.0; Type: QDOVA001BB; Serial: S/n:1216 Front/QPSK RB 1,12_ch 26665/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.960 W/kg Front/QPSK RB 1,12_ch 26665/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 24.74 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 1.25 W/kg SAR(1 g) = 0.789 W/kg; SAR(10 g) = 0.476 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.03 W/kg 0 dB = 1.03 W/kg = 0.13 dBW/kg Plot No. 16

Test Laboratory: UL Verification Services Inc., SAR Lab 1 Date/Time: 12/12/2014 8:12:23 PM Wi-Fi 2.4GHz Frequency: 2437 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 2437 MHz; σ = 1.941 S/m; εr = 50.804; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE3 Sn427; Calibrated: 1/21/2014 - Probe: EX3DV4 - SN3902; ConvF(7.35, 7.35, 7.35); Calibrated: 5/19/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM; Type: QD000P40CD; Serial: TP 1751 RHS/Touch_802.11b_ch 6/Area Scan (9x14x1): Measurement grid: dx=12mm, dy=12mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.266 W/kg RHS/Touch_802.11b_ch 6/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 11.598 V/m; Power Drift = 0.10 dB Peak SAR (extrapolated) = 0.453 W/kg SAR(1 g) = 0.214 W/kg; SAR(10 g) = 0.102 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.303 W/kg 0 dB = 0.303 W/kg = -5.19 dBW/kg Plot No. 17

Test Laboratory: UL Verification Services Inc., SAR Lab 1 Date/Time: 12/12/2014 10:24:11 PM Wi-Fi 2.4GHz Frequency: 2437 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 2437 MHz; σ = 1.941 S/m; εr = 50.804; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE3 Sn427; Calibrated: 1/21/2014 - Probe: EX3DV4 - SN3902; ConvF(7.35, 7.35, 7.35); Calibrated: 5/19/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI-B v5.0; Type: QDOVA002AA; Serial: TP:1195 Rear/802.11b_ch 6/Area Scan (9x14x1): Measurement grid: dx=12mm, dy=12mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.0684 W/kg Rear/802.11b_ch 6/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 5.941 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 0.102 W/kg SAR(1 g) = 0.048 W/kg; SAR(10 g) = 0.022 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.0693 W/kg Rear/802.11b_ch 6/Zoom Scan 2 (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 5.941 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 0.0680 W/kg SAR(1 g) = 0.038 W/kg; SAR(10 g) = 0.021 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.0498 W/kg 0 dB = 0.0498 W/kg = -13.03 dBW/kg Plot No. 18


Document Created: 2015-01-27 12:00:02
Document Modified: 2015-01-27 12:00:02
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC