16I22599-S2V1 HAC_T App B Frequency Response & SNR Test Plots

FCC ID: ZNFUS375

Test Report

Download: PDF
FCCID_2894430

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 1/8/2016 CDMA BC0 Communication System: UID 0, CDMA2000 (0); Frequency: 836.52 MHz;Duty Cycle: 1:1 T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 384/z (axial) wideband at best S/N/ABM Freq Resp(x,y,z,f) (1x1x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_300-3000_2s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 2000ms BWC applied: 10.80 dB Device Reference Point: 0, 0, -6.3 mm Telephone parameters WD signal quality Category [(signal+noise)-to-noise ratio in decibels] Category T1 0 dB to 10 dB Category T2 10 dB to 20 dB Category T3 20 dB to 30 dB Category T4 > 30 dB Cursor: Diff = 1.58 dB BWC Factor = 10.80 dB Location: 4.2, -1.6, 3.7 mm Plot No. 1

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 1/8/2016 CDMA BC0 Communication System: UID 0, CDMA2000 (0); Frequency: 836.52 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3083; ; Calibrated: 1/15/2015 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1259; Calibrated: 1/14/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 384/z (axial) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 39.07 dB ABM1 comp = 3.39 dBA/m BWC Factor = 0.16 dB Location: 4.2, -1.7, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 2

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 1/8/2016 CDMA BC0 Communication System: UID 0, CDMA2000 (0); Frequency: 836.52 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3083; ; Calibrated: 1/15/2015 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1259; Calibrated: 1/14/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 384/y (transversal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 41.74 dB ABM1 comp = -10.35 dBA/m BWC Factor = 0.16 dB Location: -1.7, -12.1, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 3

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 1/8/2016 CDMA BC1 Communication System: UID 0, CDMA2000 (0); Frequency: 1880 MHz;Duty Cycle: 1:1 T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 600/z (axial) wideband at best S/N/ABM Freq Resp(x,y,z,f) (1x1x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_300-3000_2s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 2000ms BWC applied: 10.80 dB Device Reference Point: 0, 0, -6.3 mm Telephone parameters WD signal quality Category [(signal+noise)-to-noise ratio in decibels] Category T1 0 dB to 10 dB Category T2 10 dB to 20 dB Category T3 20 dB to 30 dB Category T4 > 30 dB Cursor: Diff = 1.82 dB BWC Factor = 10.80 dB Location: 0, 360, 13 mm Plot No. 4

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 1/8/2016 CDMA BC1 Communication System: UID 0, CDMA2000 (0); Frequency: 1880 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3083; ; Calibrated: 1/15/2015 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1259; Calibrated: 1/14/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 600/z (axial) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 39.41 dB ABM1 comp = 1.28 dBA/m BWC Factor = 0.16 dB Location: 7.1, -0.8, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 5

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 1/8/2016 CDMA BC1 Communication System: UID 0, CDMA2000 (0); Frequency: 1880 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3083; ; Calibrated: 1/15/2015 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1259; Calibrated: 1/14/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 600/y (transversal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 41.61 dB ABM1 comp = -10.88 dBA/m BWC Factor = 0.16 dB Location: -2.5, -11.7, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 6


Document Created: 2017-11-17 05:26:19
Document Modified: 2017-11-17 05:26:19
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC