Test Report

FCC ID: ZNFQVR

Test Report

Download: PDF
FCCID_3600906

TEST REPORT DT&C Co., Ltd. m Dt &‘ 42, Yurim—ro, 154Beon—gil, Cheoin—gu, Yongin—si, Gyeonggi—do, Korea, 17042 Tel : 031—321—2664, Fax : 031—321—1664 1. Report No : DRTFCC1709—0208 2. Customer * Name : LG Electronics MobileComm USA, Inc. * Address : 1000 Sylvan Ave., Englewood Cliffs, New Jersey, United States, 07632 3. Use of Report : FCC Original Grant 4. Product Name / Model Name : Mobile Phone / QVR FCC ID : ZNFQVR 5. Test Method Used : ANSI C63.10—2013 Test Specification : FCC Part 15.225 6. Date of Test : 2017.09.08 ~ 2017.09.22 7. Testing Environment : Refer to appended test report. 8. Test Result : Refer to the attached test result. Tested by Technical Manager Affirmation m Name : SunGeun Lee Name : GeunKi Son The test results presented in this test report!@;nited only to the sample supplied by applicant and the use of this test report is inhibited other than its purpose. This test report shall not be reproduced except in full, without the written approval of DT&C Co., Ltd. 2017 . 09 . 27 . DT&C Co., Ltd. If this report is required to confirmation of authenticity, please contact to report@dtnc.net TRF—RF—203(08)170530 Prohibits the copying and re—issue of this report without DT&C approval. Pages: 1 / 21

Report No.: DRTFCC1709-0208 FCC ID: ZNFQVR Test Report Version Test Report No. Date Description DRTFCC1709-0208 Sep. 27, 2017 Initial issue TRF-RF-203(08)170530 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 2 / 21

Report No.: DRTFCC1709-0208 FCC ID: ZNFQVR CONTENTS 1. General Information .................................................................. 4 1.1. Testing Laboratory ................................................................. 4 1.2. Testing Environment .............................................................. 4 1.3. Measurement Uncertainty ..................................................... 4 1.4. Details of Applicant ................................................................ 5 1.5. Description of EUT ................................................................ 5 1.6. EUT CAPABILITIES .............................................................. 5 2. Information about test items .................................................... 6 2.1 Test mode............................................................................... 6 2.2 Tested frequency .................................................................... 6 2.3 EMI Suppression Device(s)/Modifications .............................. 6 3. Antenna requirements .............................................................. 6 4. Test report ................................................................................. 7 4.1 Summary of tests ................................................................... 7 4.2 Transmitter requirements........................................................ 8 4.2.1 20dB bandwidth ................................................................. 8 4.2.2 In-band emissions .............................................................. 9 4.2.4 Out-of-band emissions ......................................................11 4.2.5 Frequency Stability........................................................... 14 4.2.6 AC Line Conducted Emissions ......................................... 15 APPENDIX ................................................................................... 20 TRF-RF-203(08)170530 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 3 / 21

Report No.: DRTFCC1709-0208 FCC ID: ZNFQVR 1. General Information 1.1. Testing Laboratory DT&C Co., Ltd. The 3 m test site and conducted measurement facility used to collect the radiated data are located at the 42, Yurim-ro, 154beon-gil, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea 17042. The site is constructed in conformance with the requirements. - FCC MRA Accredited Test Firm No. : KR0034 www.dtnc.net Telephone : + 82-31-321-2664 FAX : + 82-31-321-1664 1.2. Testing Environment Ambient Condition ▪ Temperature +20 ~ 23 ℃ ▪ Relative Humidity 40 ~ 44 % 1.3. Measurement Uncertainty The measurement uncertainties shown below were calculated in accordance with requirements of ANSI C 63.4- 2014. All measurement uncertainty values are shown with a coverage factor of k = 2 to indicate a 95 % level of confidence. Parameter Measurement uncertainty AC conducted emission ± 2.4 dB (The confidence level is about 95 %, k = 2) Radiated Disturbance ± 5.1 dB (The confidence level is about 95 %, k = 2) (Below 1 GHz) TRF-RF-203(08)170530 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 4 / 21

Report No.: DRTFCC1709-0208 FCC ID: ZNFQVR 1.4. Details of Applicant Applicant : LG Electronics MobileComm USA, Inc. Address : 1000 Sylvan Ave., Englewood Cliffs, New Jersey, United States, 07632 Contact person : Kyung-Su Han 1.5. Description of EUT FCC Equipment Class Low Power Communications Device Transmitter(DXX) EUT Mobile Phone Model Name QVR Add Model Name NA Serial Number Identical prototype Power Supply DC 3.85 V Frequency Band 13.56 MHz Modulation Type ASK Channel(s) 1 Antenna type Loop Antenna 1.6. EUT CAPABILITIES This ETU contains the following capabilities: 850/1900 GSM/GPRS/EDGE, 850/1700/1900 WCDMA/HSUPA, Multi-band LTE, 802.11b/g/n/ac WLAN(2.4GHz), 802.11a/n/ac WLAN(5GHz), Bluetooth(BDR, EDR, LE), NFC TRF-RF-203(08)170530 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 5 / 21

Report No.: DRTFCC1709-0208 FCC ID: ZNFQVR 2. Information about test items 2.1 Test mode Test mode1 Continuous transmitting mode Test mode2 Continuous transmitting mode(With Wireless charging pad) Note 1: This device supports wireless charging capability. So per KDB 648474 D03 v01r04, the radiated test items were performed both normal and charging conditions. For wireless charging condition, the handset is placed on the representative charging pad under normal conditions and in a simulated call configuration. Note 2: The worst case data rate was determined according to the fundamental emission level. And data rate was tested at the worst case(212kbps). 2.2 Tested frequency Channel TX Frequency(MHz) Lowest 13.56 Middle - Highest - 2.3 EMI Suppression Device(s)/Modifications EMI suppression device(s) added and/or modifications made during testing → None 3. Antenna requirements “An intentional radiator antenna shall be designed to ensure that no antenna other than that furnished by the responsible party can be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section.” The antenna is attached on the device by means of unique coupling method (Spring Tension). Therefore this E.U.T Complies with the requirement of §15.203 TRF-RF-203(08)170530 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 6 / 21

Report No.: DRTFCC1709-0208 FCC ID: ZNFQVR 4. Test report 4.1 Summary of tests FCC part RSS Test Status Parameter Limit section(s) section(s) condition Note 1 2.1049 - 20 dB Bandwidth - C RSS-Gen - Occupied Bandwidth - NA [ 6.6 ] RSS-210 15,848 ㎶/m @ 30 m 15.225 (a) In-Band Emissions C [ B6(a) ] 13.553 – 13.567 MHz Radiated Note 334 ㎶/m @ 30 m 2 RSS-210 15.225 (b) In-Band Emissions 13.410 – 13.553 MHz C [ B6(b) ] 13.567 – 13.710 MHz 106 ㎶/m @ 30 m RSS-210 15.225 (c) In-Band Emissions 13.110 – 13.410 MHz C [ B6(c) ] 13.710 – 14.010 MHz RSS-210 Emissions outside of the specified 15.225 (d) [ B6(d) ] band (13.110-14.010 MHz) must Out-of Band Emissions C 15.209 RSS-GEN meet the radiated limits detailed in [8.9] 15.209 Temp & RSS-210 15.225 (e) Frequency Stability ±0.01 % of operating frequency Humid Test C [ B6 ] Chamber RSS-Gen AC Conducted AC Line 15.207 FCC Part 15.207 C [ 8.8 ] Emissions Conducted 15.203 - Antenna Requirements FCC Part 15.203 - C Note 1: C=Comply NC=Not Comply NT=Not Tested NA=Not Applicable Note 2: For radiated emission tests below 30 MHz were performed on semi-anechoic chamber which is correlated with OATS. TRF-RF-203(08)170530 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 7 / 21

Report No.: DRTFCC1709-0208 FCC ID: ZNFQVR 4.2 Transmitter requirements 4.2.1 20dB bandwidth - Procedure: The 20 dB Bandwidth is measured with a spectrum analyzer connected via a receive antenna placed near the EUT while the EUT is operating in transmission mode. And spectrum analyzer setting use following test procedure of ANCSI C63.10-2013 – Section 6.9.2. 1. Center frequency = EUT channel center frequency 2. Span = 2 ~ 5 times the OBW 3. RBW = 1 % ~ 5 % OBW 4. VBW ≥ 3 x RBW 5. Detector = Peak 6. Trace = Max hold 7. The trace was allowed to stabilize 8. Determine the reference value = Set the spectrum analyzer marker to the highest level of the displayed trace 9. Using the marker-delta function of the instrument, determine the “−xx dB down amplitude” using [(reference value) − xx]. 10. Reset the marker-delta function and move the marker to the other side of the emission until the delta marker amplitude is at the same level as the reference marker amplitude. The marker-delta frequency reading at this point is the specified emission bandwidth. - Measurement Data: Comply - Minimum Standard: NA TRF-RF-203(08)170530 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 8 / 21

Report No.: DRTFCC1709-0208 FCC ID: ZNFQVR 4.2.2 In-band emissions - Test Configuration Below 30MHz - Procedure: The radiated emission was tested according to the section 6.4 of the ANSI C63.10-2013. The EUT was placed on a 0.8 m high non-conductive table and it was placed at 3m distance from the antenna. Measurements were performed for each of the three antenna orientations. (ie. parallel, perpendicular, and ground-parallel) Also, measurements were performed with the EUT oriented in 3 orthogonal axis and rotated 360 degrees to determine worst-case orientation for maximum emissions. RBW = As specified in below table, VBW ≥ 3 x RBW, Sweep = Auto, Detector = Peak Trace mode = Max Hold until the trace stabilizes. - Minimum Standard: Part 15.225(a), (b), (c) & RSS-210 [ B6(a), (b), (c) ] Limit at 30 m measurement distance Frequency Band [MHz] [uV/m] [dBuV/m] 13.553-13.567 15,848 84.00 13.410-13.553 334 50.47 13.567-13.710 13.110-13.410 106 40.51 13.710-14.010 TRF-RF-203(08)170530 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 9 / 21

Report No.: DRTFCC1709-0208 FCC ID: ZNFQVR - Measurement Data: Test mode 1 Tested Frequency : 13.56 MHz Measurement Distance : 3 Meters Test Field Field Reading Frequency Freq. EUT ANT T.F Strength Strength Limit Margin Level Band [MHz] Axis. (Note 1) [dB/m] @3 m @30 m [dBuV/m] [dB] [dBuV] [MHz] [dBuV/m] [dBuV/m] 13.110 ~ 13.410 13.135 Y P 12.60 20.41 33.01 -6.99 40.51 47.50 13.410 ~ 13.553 13.553 Y P 16.70 20.44 37.14 -2.86 50.47 53.33 13.553 ~ 13.567 13.560 Y P 26.80 20.44 47.24 7.24 84.00 76.76 13.567 ~ 13.710 13.568 Y P 16.30 20.44 36.74 -3.26 50.47 53.73 13.710 ~ 14.010 13.986 Y P 15.10 20.46 35.56 -4.44 40.51 44.95 - Measurement Data: Test mode 2 Tested Frequency : 13.56 MHz Measurement Distance : 3 Meters Test Field Field Reading Frequency Freq. EUT ANT T.F Strength Strength Limit Margin Level Band [MHz] Axis. (Note 1) [dB/m] @3 m @30 m [dBuV/m] [dB] [dBuV] [MHz] [dBuV/m] [dBuV/m] 13.110 ~ 13.410 13.135 Y P 16.50 20.41 36.91 -3.09 40.51 43.60 13.410 ~ 13.553 13.553 Y P 21.50 20.44 41.94 1.94 50.47 48.53 13.553 ~ 13.567 13.560 Y P 32.00 20.44 52.44 12.44 84.00 71.56 13.567 ~ 13.710 13.568 Y P 19.90 20.44 40.34 0.34 50.47 50.13 13.710 ~ 14.010 13.984 Y P 17.50 20.46 37.96 -2.04 40.51 42.55 Note 1. Loop antenna orientation “P”: Parallel, “V”: perpendicular, “G”: ground-parallel Note 2. This test item was performed at 3 m and the data were extrapolated to the specified measurement distance of 30 m using the square of an inverse linear distance extrapolation factor (40 dB/decade) as specified in §15.31(f)2. ▪ Extrapolation Factor = 20 log10(30/3)2 = 40 dB Note 3. All data were recorded using a spectrum analyzer employing a peak detector. If PK results were meet Quasi-peak limit, Quasi-peak measurements were omitted. Note 4. Sample Calculation. Margin = Limit – Field Strength @ 30 m / Field Strength @ 30 m = Field Strength @ 3 m – 40 dB Field Strength @ 3 m = Reading + T.F / T.F = AF + CL Where, T.F = Total Factor, AF = Antenna Factor, CL = Cable Loss TRF-RF-203(08)170530 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 10 / 21

Report No.: DRTFCC1709-0208 FCC ID: ZNFQVR 4.2.4 Out-of-band emissions - Test configuration Below 30MHz 30MHz ~ 1GHz - Procedure: The radiated emission was tested according to the section 6.4, 6.5 of the ANSI C63.10-2013. The EUT was tested from 9 kHz up to the 1 GHz excluding the band 13.110-14.010 MHz. A The EUT was placed on a 0.8 m high non-conductive table and it was placed at 3m distance from the antenna. For measurements below 30MHz were performed for each of the three antenna orientations. (ie. parallel, perpendicular, and ground-parallel) For measurements above 30MHz were performed for each of the both horizontal and vertical polarizations. Also, measurements were performed with the EUT oriented in 3 orthogonal axis and rotated 360 degrees to determine worst-case orientation for maximum emissions. RBW = As specified in below table, VBW ≥ 3 x RBW, Sweep = Auto, Detector = Peak Trace mode = Max Hold until the trace stabilizes. - Minimum Standard: Part 15.209, 225(d) & RSS-210[B6(d)], RSS-GEN[8.9] ▪ FCC Part 15.209(a): Frequency Field Strength Measurement Distance [MHz] [uV/m] [Meters] 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30 30 30 30 ~ 88 100 ** 3 88 ~ 216 150 ** 3 216 ~ 960 200 ** 3 Above 960 200 3 ** Except as provided in 15.209(g), fundamental emissions from intentional radiators operating under this Section shall not be located in the frequency bands 54-72 MHz, 76-88 MHz, 174-216 MHz or 470-806 MHz. However, operation within these frequency bands is permitted under other sections of this Part, e.g. 15.231 and 15.241. ▪ FCC Part 15.209(b): In the emission table above, the tighter limit applies at the band edges. TRF-RF-203(08)170530 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 11 / 21

Report No.: DRTFCC1709-0208 FCC ID: ZNFQVR - Measurement Data: Test mode 1 Tested Frequency : 13.56 MHz Measurement Distance : 3 Meters Distance Field Frequency EUT ANT Reading T.F Limit Margin factor Strength [MHz] Axis. (Note 1) [dBuV] [dB/m] [dBuV/m] [dB] [dB] [dBuV/m] 1.401 Y P 15.40 19.66 40.00 -4.94 24.70 29.64 4.811 Y P 10.40 19.92 40.00 -9.68 29.50 39.18 14.360 Y P 16.10 20.48 40.00 -3.42 29.50 32.92 35.820 X V 37.50 -17.15 N/A 20.35 40.00 19.65 40.670 X V 40.20 -16.57 N/A 23.63 40.00 16.37 77.530 X V 42.10 -18.77 N/A 23.33 40.00 16.67 141.227 X V 38.70 -13.80 N/A 24.90 43.50 18.60 672.449 X V 28.80 -0.74 N/A 28.06 46.00 17.94 855.762 X V 25.30 2.94 N/A 28.24 46.00 17.76 - - - - - - - - - - - - - - - - - - - - - - - - - - - Note 1. Loop antenna orientation (30 MHz Below) “P”= Parallel, “V”= perpendicular, “G”= ground-parallel Bilog antenna polarization (30 MHz above) “H”= Horizontal, “V”= Vertical Note 2. All data were recorded using a spectrum analyzer employing a peak detector. If PK results were meet Quasi-peak limit, Quasi-peak measurements were omitted. Note 3. No other spurious and harmonic emissions were reported greater than listed emissions above table. Note 4. Sample calculation Margin = Limit – Field Strength Field Strength = Reading + T.F – Distance factor T.F = AF + CL – AG Distance factor = 20log(Measurement distance / The measured distance)2 Where, T.F = Total Factor, AF = Antenna Factor, CL = Cable Loss, AG = Amplifier Gain TRF-RF-203(08)170530 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 12 / 21

Report No.: DRTFCC1709-0208 FCC ID: ZNFQVR - Measurement Data: Test mode 2 Tested Frequency : 13.56 MHz Measurement Distance : 3 Meters Distance Field Frequency EUT ANT Reading T.F Limit Margin factor Strength [MHz] Axis. (Note 1) [dBuV] [dB/m] [dBuV/m] [dB] [dB] [dBuV/m] 0.148 X P 57.10 19.37 80.00 -3.53 24.20 27.73 0.654 X P 24.20 19.54 40.00 3.74 31.30 27.56 0.737 X P 28.00 19.57 40.00 7.57 30.30 22.73 1.033 X P 23.00 19.63 40.00 2.63 27.30 24.67 1.324 X P 19.60 19.66 40.00 -0.74 25.20 25.94 1.440 X P 18.60 19.66 40.00 -1.74 24.40 26.14 1.624 X P 16.80 19.68 40.00 -3.52 23.40 26.92 40.670 X V 53.10 -16.57 N/A 36.53 40.00 3.47 48.430 X V 41.00 -15.87 N/A 25.13 40.00 14.87 67.830 X V 46.40 -16.86 N/A 29.54 40.00 10.46 77.530 X V 42.30 -18.77 N/A 23.53 40.00 16.47 113.097 X H 44.80 -16.16 N/A 28.64 43.50 14.86 140.257 X V 38.20 -13.87 N/A 24.33 43.50 19.17 672.449 X V 29.50 -0.73 N/A 28.77 46.00 17.23 Note 1. Loop antenna orientation (30 MHz Below) “P”= Parallel, “V”= perpendicular, “G”= ground-parallel Bilog antenna polarization (30 MHz above) “H”= Horizontal, “V”= Vertical Note 2. All data were recorded using a spectrum analyzer employing a peak detector. If PK results were meet Quasi-peak limit, Quasi-peak measurements were omitted. Note 3. No other spurious and harmonic emissions were reported greater than listed emissions above table. Note 4. Sample calculation Margin = Limit – Field Strength Field Strength = Reading + T.F – Distance factor T.F = AF + CL – AG Distance factor = 20log(Measurement distance / The measured distance)2 Where, T.F = Total Factor, AF = Antenna Factor, CL = Cable Loss, AG = Amplifier Gain TRF-RF-203(08)170530 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 13 / 21

Report No.: DRTFCC1709-0208 FCC ID: ZNFQVR 4.2.5 Frequency Stability - Procedure: Part 15.225 requires that devices operating in the 13.553 – 13.567 MHz shall maintain the carrier frequency within 0.01 % of the operating frequency over the temperature variation of -20 degrees to + 50 degrees C at normal supply voltage. - Measurement Data: Comply Operating Frequency : 13,560,000 Hz VOLTAGE POWER TEMP Frequency Freq. Dev. Deviation (%) (VDC) (℃) (Hz) (Hz) (%) 100% +20(ref) 13,560,294 294 0.002168 100% -20 13,560,295 295 0.002175 100% -10 13,560,332 332 0.002448 100% 0 13,560,352 352 0.002596 100% 3.85 +10 13,560,354 354 0.002611 100% +20 13,560,294 294 0.002168 100% +30 13,560,301 301 0.002220 100% +40 13,560,270 270 0.001991 100% +50 13,560,262 262 0.001932 85% 3.27 +20 13,560,287 287 0.002116 115% 4.43 +20 13,560,291 291 0.002146 - Minimum Standard: Part 15. 225(e) & RSS-210 [B6] The frequency tolerance of the carrier signal shall be maintained within ±0.01 % of the operating frequency. TRF-RF-203(08)170530 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 14 / 21

Report No.: DRTFCC1709-0208 FCC ID: ZNFQVR 4.2.6 AC Line Conducted Emissions - Test Requirements and limit For an intentional radiator that is designed to be connected to the public utility (AC) power line, the radio frequency voltage that is conducted back onto the AC power line on any frequency or frequencies, within the band 150 kHz to 30 MHz, shall not exceed the limits in the following table, as measured using a 50 μH/50 ohms line impedance stabilization network (LISN). Frequency Range Conducted Limit (dBuV) (MHz) Quasi-Peak Average 0.15 ~ 0.5 66 to 56 * 56 to 46 * 0.5 ~ 5 56 46 5 ~ 30 60 50 * Decreases with the logarithm of the frequency Compliance with this provision shall be based on the measurement of the radio frequency voltage between each power line (LINE and NEUTRAL) and ground at the power terminals. - Test Configuration See test photographs for the actual connections between EUT and support equipment. - Test Procedure 1. The EUT is placed on a wooden table 80 cm above the reference ground plane. 2. The EUT is connected via LISN to a test power supply. 3. The measurement results are obtained as described below: 4. Detectors – Quasi Peak and Average Detector. - Measurement Data: Comply (refer to the next page) TRF-RF-203(08)170530 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 15 / 21

Report No.: DRTFCC1709-0208 FCC ID: ZNFQVR Test mode 1 Measurement Data TRF-RF-203(08)170530 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 16 / 21

Report No.: DRTFCC1709-0208 FCC ID: ZNFQVR Measurement Data TRF-RF-203(08)170530 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 17 / 21

Report No.: DRTFCC1709-0208 FCC ID: ZNFQVR Test mode 1 (With antenna terminated) Measurement Data TRF-RF-203(08)170530 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 18 / 21

Report No.: DRTFCC1709-0208 FCC ID: ZNFQVR Measurement Data TRF-RF-203(08)170530 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 19 / 21

Report No.: DRTFCC1709-0208 FCC ID: ZNFQVR APPENDIX TEST EQUIPMENT FOR TESTS TRF-RF-203(08)170530 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 20 / 21

Report No.: DRTFCC1709-0208 FCC ID: ZNFQVR Cal.Date Next.Cal.Date Type Manufacturer Model (yy/mm/dd) (yy/mm/dd) S/N Spectrum Analyzer Agilent Technologies N9020A 17/09/06 18/09/06 MY48011075 Multimeter FLUKE 17B 17/04/12 18/04/12 26030065WS DC Power Supply Agilent Technologies 66332A 17/09/05 18/09/05 MY43000394 Signal Generator Rohde Schwarz SMBV100A 17/01/04 18/01/04 255571 Temp & Humi Test SJ Science SJ-TH-S50 17/01/25 18/01/25 SJ-TH-S50-140205 Chamber Thermohygrometer BODYCOM BJ5478 17/04/11 18/04/11 120612-1 Loop Antenna Schwarzbeck FMZB1513 16/04/22 18/04/22 1513-128 BILOG ANTENNA Schwarzbeck VULB 9160 16/11/11 18/11/11 3151 MLA-010K01- PreAmplifier TSJ 17/03/06 18/03/06 1844538 B01-27 EMI Test Receiver Rohde Schwarz ESR7 17/02/16 18/02/16 101061 EMI Test Receiver R&S ESCI 17/02/26 18/02/16 100364 SINGLE-PHASE NF 4420 17/09/01 18/09/01 3049354420023 MASTER LISN SCHWARZBECK NNLK 8121 17/04/03 18/04/03 6182 Note: The measurement antennas were calibrated in accordance to the requirements of ANSI C63.5-2006. TRF-RF-203(08)170530 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 21 / 21


Document Created: 2019-11-05 05:33:59
Document Modified: 2019-11-05 05:33:59
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC