HAC RF Test Report5

FCC ID: ZNFLS770

Test Report

Download: PDF
FCCID_2576247

Calibration Laboratory of Cubp PC /‘z Schweizerischer Kalibrierdienst Schmid & Partner Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client UL CCS USA Certificate No: ER3—2540_Aug14 CALIBRATION CERTIFICATE Object ER3DVE6 — SN:2540 Calibration procedure(s) QA CAL—O2.v8, QA CAL—25.v6 Calibration procedure for E—field probes optimized for close near field evaluations in air Calibration date: August 26, 2014 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID Cal Date (Certificate No.) Scheduled Calibration Power meter E4419B GB41293874 03—Apr—14 (No. 217—01911) Apr—15 Power sensor E4412A MY41498087 03—Apr—14 (No. 217—01911) Apr—15 Reference 3 dB Attenuator SN: $5054 (3c) 03—Apr—14 (No. 217—01915) Apr—15 Reference 20 dB Attenuator SN: S5277 (20%) 03—Apr—14 (No. 217—01919) Apr—15 Reference 30 dB Attenuator SN: $5129 (30b) 03—Apr—14 (No. 217—01920) Apr—15 Reference Probe ER3DV6 SN: 2328 10—Oct—13 (No. ER3—2328_Oct13) Oct—14 DAE4 SN: 789 30—Apr—14 (No. DAE4—789_Apr14) Apr—15 Secondary Standards ID Check Date (in house) Scheduled Check RF generator HP 8648C US3642U01700 4—Aug—99 (in house check Apr—13) In house check: Apr—16 Network Analyzer HP 8753E US37390585 18—Oct—01 (in house check Oct—13) In house check: Oct—14 Name Function Signature Calibrated by: Jeton Kastrati Laboratory Technician q(_—"bC Approved by: Katja Pokovic Technical Manager mss \ Issued: August 26, 2014 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: ER3—2540_Aug14 Page 1 of 11

Calibration Laboratory of \\\\'//1/ Schweizerischer Kalibrierdienst hS I”/’/ 8 j C Schmid & Partner ibflk\%%/fifi Service suisse d‘étalonnage Engineering AG ze mb Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland ; Ttn \C Swiss Calibration Service * Alulalst P Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: NORMx,y,z sensitivity in free space DCP diode compression point CF crest factor (1/duty_cycle) of the RF signal A, B, C, D modulation dependent linearization parameters Polarization 9 p rotation around probe axis Polarization 8 8 rotation around an axis that is in the plane normal to probe axis (at measurement center), iie., 8 = 0 is normal to probe axis Connector Angle information used in DASY system to align probe sensor X to the robot coordinate system Calibration is Performed According to the Following Standards: a) —IEEE Std 1309—2005, " IEEE Standard for calibration of electromagnetic field sensors and probes, excluding antennas, from 9 kHz to 40 GHz", December 2005 b) CTIA Test Plan for Hearing Aid Compatibility, April 2010. Methods Applied and Interpretation of Parameters: e NORMx,y,z: Assessed for E—field polarization 9 = 0 for XY sensors and 9 = 90 for Z sensor (f < 900 MHz in TEM—cell; f > 1800 MHz: R22 waveguide). e NORM(Px,y,z = NORMx,y,z * frequency_response (see Frequency Response Chart). e DCPx,y,z: DCP are numerical linearization parameters assessed based on the data of power sweep with CW signal (no uncertainty required). DCP does not depend on frequency nor media. e PAR: PAR is the Peak to Average Ratio that is not calibrated but determined based on the signal characteristics e Ax,y,z; Bx,y,.z; Cx,y,z; Dx,y,z; VRx,y,z: A, B, C, D are numerical linearization parameters assessed based on the data of power sweep for specific modulation signal. The parameters do not depend on frequency nor media. VR is the maximum calibration range expressed in RMS voltage across the diode. e Spherical isotropy (3D deviation from isotropy): in a locally homogeneous field realized using an open waveguide setup. e Sensor Offset: The sensor offset corresponds to the offset of virtual measurement center from the probe tip (on probe axis). No tolerance required. e Connector Angle: The angle is assessed using the information gained by determining the NORMx (no uncertainty required). Certificate No: ER3—2540_Aug14 Page 2 of 11

ER3DVE6 — SN:2540 August 26, 2014 Probe ER3DVGCO SN:2540 Manufactured: July 27, 2010 Calibrated: August 26, 2014 Calibrated for DASY/EASY Systems (Note: non—compatible with DASY2 system!) Certificate No: ER3—2540_Aug14 Page 3 of 11

ER3DVE6— SN:2540 August 26, 2014 DASY/EASY — Parameters of Probe: ER3DVG6 — SN:2540 Basic Calibration Parameters Sensor X Sensor Y Sensor Z Unc (k=2) Norm (uV/(V/m)f) 1.49 1.22 1.28 £10.1 % DCP (mV)" 99.3 99.7 102.9 Modulation Calibration Parameters UID Communication System Name A B C D VR Unc® dB dByuV dB mV (k=2) 0 CwW xX 0.0 0.0 1.0 0.00 141. +3.5 % Y 0.0 0.0 1.0 134.0 Z 0.0 0.0 1.0 168.3 10021— GSM—FDD (TDMA, GMSK) xX 3.75 78.5 201 9.39 125.0 +19% DAB Y 5.81 85.0 23.0 122.7 Z 5.96 81.5 20.8 116.3 10023— GPRS—FDD (TDMA, GMSK, TN 0) xX 4.83 82.8 21.7 9.57 1195 +22% DAB Y 6.25 85.3 23.0 118.4 Z 8.42 87.4 23.2 144.6 10024— GPRS—FDD (TDMA, GMSK, TN 0—1) X 6.86 87.2 21.2 6.56 114.2 +25% DAB Y 18.28 99.3 25.1 113.2 Z 4.48 76.1 16.7 146.3 10027— GPRS—FDD (TDMA, GMSK, TN 0—1—2) x 9.52 86.4 18.4 4.80 133.2 +25% DAB Y 33.81 99.6 22.3 130.0 Z 42.52 99.6 22.0 121.7 10028— GPRS—FDD (TDMA, GMSK, TNO—1—2—3) x 37.71 99.5 20.9 3.55 147.8 +2.2% DAB Y¥ 3315 99.5 21.7 141.3 Z 45.19 99.8 21.4 133.1 10030— IEEE 802.15.1 Bluetooth (GFSK, DH1) x 22.99 99.5 23.0 5.30 1284 +2.2% CAA Y 2314 99.5 23.6 125.1 2 33.99 99.4 22.8 117.8 10061— IEEE 802.11b WiFi 2.4 GHz (DSSS, 11 h 3.20 70.8 20.6 3.60 1332 +12% CAA Mbps) Y 3.93 74.9 22.6 127.1 Z 4.81 78.3 23.8 115.1 10077— IEEE 802.11g WiFi 2.4 GHz xX 10.71 72.2 264 11.00 120.3 +1.9% CAA (DSSS/OFDM, 54 Mbps) Y 10.81 72.2 26.3 114.2 Z 10.31 70.1 24.5 103.2 10173— LTE—TDD (SC—FDMA, 1 RB, 20 MHz, xX 6.07 711 25.0 948 1111 +3.5% CAB 16—QAM) Y 7.39 771 28.7 141.4 Z 7.20 75.1 26.8 132.0 10235— LTE—TDD (SC—FDMA, 1 RB, 10 MHz, xX 6.98 76.2 28.3 948 145.9 +3.5% CAB 16—QAM) Y 7.43 77.3 28.8 140.4 Z 716 74.9 26.6 131.9 Certificate No: ER3—2540_Aug14 Page 4 of 11

ER3DVE6— SN:2540 August 26, 2014 10238— LTE—TDD (SG—FDMA, 1 RB, 15 MHz, xX 6.88 75.7 279 948 1455 +33 % CAB 16—QAM) y 7.35 76.9 28.6 140.6 z _7.0 74.2 26.2 131.7 10295— CDMA2000, RG1, SO3, 1/8th Rate 25 fr. x 738 79.3 324 1249 1112 +14% AAB y 8.44 83.0 34.3 109.4 Z 7.95 78.8 30.7 101.7 The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. ® Numerical linearization parameter: uncertainty not required. © Uncertainty is determined using the max. deviation from linear response applying rectangular distribution and is expressed for the square of the field value. Certificate No: ER3—2540_Aug14 Page 5 of 11

ER3DV6— SN:2540 August 26, 2014 Frequency Response of E—Field (TEM—Cell:ifi110 EXX, Waveguide: R22) Frequency response (normalized) 0.6—— f 0.5:'IIIiI'IliIIII;EEIII;IIIIlIlII 0 500 1000 1500 2000 .. f [MHz] a TEM (0°) esF3 ce TE‘M {90°) 6 R22 (90°) Uncertainty of Frequency Response of E—field: £ 6.3% (k=2) Certificate No: ER3—2540_Aug14 Page 6 of 11

ER3DVE6— SN:2540 August 26, 2014 Receiving Pattern (¢), 9 = 0° f=600 MHz,TEM,0° f=2500 MHz,R22,0° s 3 — 90 «e tiege.,.__ ’/—’If"‘":’\\ 135 45 135 ~ 4s p \ riz * A * A s 4 \ 1 . 4 i s % & i¥ a | * * “ k * L a * | 199 * ’g’ 0.2 o« o6 0s ED 169 i * % b2z2 o4 06 08 f‘ % £A «) 4 * s 4 " * & [ & ® MA 225 — ‘315 22'.-5 x 3;5 & 3 "zg* i | Frwc o "yg gx @ @_ @ ) * @; _@ # Tot X Y Z Tot X Y Z Receiving Pattern (¢), 9 = 90 i 1 6 mum 0 f=600 MHz,TEM,90° f=2500 MHz,R22,90° .a4. % enAE~. 4*" m ho e *P3sy 135// DWas td 135* xas & | | / / is | / * $ / ‘x [ [ i { cj —of \ 1 mo; ’ o2 04 06 08 f | | 18& @ or o4 06 08 b \ [ | Y f } Doi \\ } % / t | % y 2;5 % /./515 | | 2;5 & » 315 » s y \___W_M./ [ PDWS bnbeeeneeaereneantnt 3ra O . 270 — M 5 e e & 6 C e [e] Tot X Y +4 Tot X Y Z Certificate No: ER3—2540_Aug14 Page 7 of 11

ER3DV6— SN:2540 August 26, 2014 Receiving Pattern (¢), 8 = 0° ltto 30| ‘g OOW‘MMWM% 5 P j 05": ............. EuF3 1 L_lLl 1| M $ CL j Lt 3 Lob _ 1 | E4 —150 100 EA 6 50 160 140 [k am Roll [°] aCe @ @ # 105’sz GOHH'LZ 1860'de zsm'de Uncertainty of Axial Isotropy Assessment: £ 0.5% (k=2) Receiving Pattern (¢), 8 = 90° saffomhodsnimommforrmmnmimnisonmimirrimenenmimca 30‘g | f f 00p—i —fok—p—g—B—g#rpq #—inirf—fqaripeef—Gf—t—Bt—p & & —b—§—8—¢—$—£2.— f . : | &0 OEimommiofoomenmaaigprinenolchi.yegtieaisitsemeial P _ ' ' 11§4||||llllllllixlllillljllllIJ. ~150 100 —50 0 50 100 150 A Roll [°] O 100“%in €00 MHz 180fivulnz 25%1‘12 Uncertainty of Axial Isotropy Assessment: £ 0.5% (k=2) Certificate No: ER3—2540_Aug14 Page 8 of 11

ER3DVE6— SN:2540 August 26, 2014 Dynamic Range f(E—field) (TEM cell , f = 900 MHz) 1047 Input Signal [uV] 103}, 10 E total [V/m] not compensated compensated Error [dB] { i f a — P eveaficsed —4——f —2 109 101 102 103 E total [V/m] * not compensated compensated Uncertainty of Linearity Assessment: £ 0.6% (k=2) Certificate No: ER3—2540_Aug14 Page 9 of 11

ER3DVE6— SN:2540 August 26, 2014 Deviation from Isotropy in Air Error (¢, 9), f = 900 MHz & 2 ua 4 > © o . —1.0 —0.8 —0.6 —9.4 —0.2 0.0 0.2 0.4 0.6 0.8 1.0 Uncertainty of Spherical Isotropy Assessment: + 2.6% (k=2) Certificate No: ER3—2540_Aug14 Page 10 of 11

ER3DV6— SN:2540 August 26, 2014 DASY/EASY — Parameters of Probe: ER3DVG6 — SN:2540 Other Probe Parameters Sensor Arrangement Rectangular Connector Angle (°) —58.3 Mechanical Surface Detection Mode enabled Optical Surface Detection Mode disabled Probe Overall Length 337 mm Probe Body Diameter 10 mm Tip Length 10 mm Tip Diameter 8 mm Probe Tip to Sensor X Calibration Point 2.5 mm Probe Tip to Sensor Y Calibration Point 2.5 mm Probe Tip to Sensor Z Calibration Point 2.5 mm Certificate No: ER3—2540_Aug14 Page 11 of 11


Document Created: 2019-10-23 23:48:30
Document Modified: 2019-10-23 23:48:30
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC