HAC T Coil Report2

FCC ID: ZNFLS770

Test Report

Download: PDF
FCCID_2576241

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 3/4/2015 CDMA2000 BC0 Communication System: UID 0, CDMA2000 (0); Frequency: 836.52 MHz;Duty Cycle: 1:1 T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 384/z (axial) wideband at best S/N/ABM Freq Resp(x,y,z,f) (1x1x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_300-3000_2s.wav Output Gain: 54.45 Measure Window Start: 300ms Measure Window Length: 2000ms BWC applied: 10.80 dB Device Reference Point: 0, 0, -6.3 mm Telephone parameters WD signal quality Category [(signal+noise)-to-noise ratio in decibels] Category T1 0 dB to 10 dB Category T2 10 dB to 20 dB Category T3 20 dB to 30 dB Category T4 > 30 dB Cursor: Diff = 1.73 dB BWC Factor = 10.80 dB Location: 4.6, -19, 3.7 mm Plot No. 1

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 3/4/2015 CDMA2000 BC0 Communication System: UID 0, CDMA2000 (0); Frequency: 836.52 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3092; ; Calibrated: 7/18/2014 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1259; Calibrated: 1/14/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 384/z (axial) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 27.58 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 41.12 dB ABM1 comp = 2.44 dBA/m BWC Factor = 0.16 dB Location: 4.6, -19.2, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 2

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 3/4/2015 CDMA2000 BC0 Communication System: UID 0, CDMA2000 (0); Frequency: 836.52 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3092; ; Calibrated: 7/18/2014 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1259; Calibrated: 1/14/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 384/y (transversal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 27.58 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 44.53 dB ABM1 comp = -3.59 dBA/m BWC Factor = 0.16 dB Location: 4.6, -12.5, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 3

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 3/4/2015 CDMA2000 BC1 Communication System: UID 0, CDMA2000 (0); Frequency: 1880 MHz;Duty Cycle: 1:1 T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 600/z (axial) wideband at best S/N/ABM Freq Resp(x,y,z,f) (1x1x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_300-3000_2s.wav Output Gain: 54.45 Measure Window Start: 300ms Measure Window Length: 2000ms BWC applied: 10.80 dB Device Reference Point: 0, 0, -6.3 mm Telephone parameters WD signal quality Category [(signal+noise)-to-noise ratio in decibels] Category T1 0 dB to 10 dB Category T2 10 dB to 20 dB Category T3 20 dB to 30 dB Category T4 > 30 dB Cursor: Diff = 1.54 dB BWC Factor = 10.80 dB Location: 4.4, -17, 3.7 mm Plot No. 4

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 3/3/2015 CDMA2000 BC1 Communication System: UID 0, CDMA2000 (0); Frequency: 1880 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3092; ; Calibrated: 7/18/2014 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1259; Calibrated: 1/14/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 600/z (axial) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 27.58 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 42.22 dB ABM1 comp = 3.07 dBA/m BWC Factor = 0.16 dB Location: 4.6, -17.1, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 5

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 3/3/2015 CDMA2000 BC1 Communication System: UID 0, CDMA2000 (0); Frequency: 1880 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3092; ; Calibrated: 7/18/2014 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1259; Calibrated: 1/14/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 600/y (transversal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 27.58 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 40.00 dB ABM1 comp = -4.49 dBA/m BWC Factor = 0.16 dB Location: 2.1, -12.5, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 6

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 3/4/2015 CDMA2000 BC10 Communication System: UID 0, CDMA2000 (0); Frequency: 820.5 MHz;Duty Cycle: 1:1 T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 580/z (axial) wideband at best S/N/ABM Freq Resp(x,y,z,f) (1x1x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_300-3000_2s.wav Output Gain: 54.45 Measure Window Start: 300ms Measure Window Length: 2000ms BWC applied: 10.80 dB Device Reference Point: 0, 0, -6.3 mm Telephone parameters WD signal quality Category [(signal+noise)-to-noise ratio in decibels] Category T1 0 dB to 10 dB Category T2 10 dB to 20 dB Category T3 20 dB to 30 dB Category T4 > 30 dB Cursor: Diff = 2.00 dB BWC Factor = 10.80 dB Location: 4.5, -17.2, 3.7 mm Plot No. 7

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 3/4/2015 CDMA2000 BC10 Communication System: UID 0, CDMA2000 (0); Frequency: 820.5 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3092; ; Calibrated: 7/18/2014 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1259; Calibrated: 1/14/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 580/z (axial) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 27.58 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 41.17 dB ABM1 comp = 3.08 dBA/m BWC Factor = 0.16 dB Location: 4.6, -17.1, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 8

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 3/4/2015 CDMA2000 BC10 Communication System: UID 0, CDMA2000 (0); Frequency: 820.5 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3092; ; Calibrated: 7/18/2014 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1259; Calibrated: 1/14/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 580/y (transversal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 27.58 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 42.57 dB ABM1 comp = -4.30 dBA/m BWC Factor = 0.16 dB Location: 7.5, -12.5, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 9

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 3/5/2015 CDMA2000 BC0 (with Smart Cover) Communication System: UID 0, CDMA2000 (0); Frequency: 836.52 MHz;Duty Cycle: 1:1 T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 384/z (axial) wideband at best S/N/ABM Freq Resp(x,y,z,f) (1x1x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_300-3000_2s.wav Output Gain: 54.45 Measure Window Start: 300ms Measure Window Length: 2000ms BWC applied: 10.80 dB Device Reference Point: 0, 0, -6.3 mm Telephone parameters WD signal quality Category [(signal+noise)-to-noise ratio in decibels] Category T1 0 dB to 10 dB Category T2 10 dB to 20 dB Category T3 20 dB to 30 dB Category T4 > 30 dB Cursor: Diff = 1.76 dB BWC Factor = 10.80 dB Location: 3.9, -16.7, 3.7 mm Plot No. 10

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 3/5/2015 CDMA2000 BC0 (with Smart Cover) Communication System: UID 0, CDMA2000 (0); Frequency: 836.52 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3092; ; Calibrated: 7/18/2014 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1259; Calibrated: 1/14/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 384/z (axial) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 27.58 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 39.25 dB ABM1 comp = -0.89 dBA/m BWC Factor = 0.16 dB Location: 3.8, -16.7, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 11

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 3/5/2015 CDMA2000 BC0 (with Smart Cover) Communication System: UID 0, CDMA2000 (0); Frequency: 836.52 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3092; ; Calibrated: 7/18/2014 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1259; Calibrated: 1/14/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 384/y (transversal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 27.58 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 41.53 dB ABM1 comp = -7.02 dBA/m BWC Factor = 0.16 dB Location: 3.3, -12.1, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 12

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 3/6/2015 CDMA2000 BC1 (with Smart Cover) Communication System: UID 0, CDMA2000 (0); Frequency: 1880 MHz;Duty Cycle: 1:1 T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 600/z (axial) wideband at best S/N/ABM Freq Resp(x,y,z,f) (1x1x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_300-3000_2s.wav Output Gain: 54.45 Measure Window Start: 300ms Measure Window Length: 2000ms BWC applied: 10.81 dB Device Reference Point: 0, 0, -6.3 mm Telephone parameters WD signal quality Category [(signal+noise)-to-noise ratio in decibels] Category T1 0 dB to 10 dB Category T2 10 dB to 20 dB Category T3 20 dB to 30 dB Category T4 > 30 dB Cursor: Diff = 2.00 dB BWC Factor = 10.81 dB Location: 3.5, -17.2, 3.7 mm Plot No. 13

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 3/5/2015 CDMA2000 BC1 (with Smart Cover) Communication System: UID 0, CDMA2000 (0); Frequency: 1880 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3092; ; Calibrated: 7/18/2014 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1259; Calibrated: 1/14/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 600/z (axial) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 27.58 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 38.63 dB ABM1 comp = -1.52 dBA/m BWC Factor = 0.16 dB Location: 3.3, -17.1, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 14

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 3/5/2015 CDMA2000 BC1 (with Smart Cover) Communication System: UID 0, CDMA2000 (0); Frequency: 1880 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3092; ; Calibrated: 7/18/2014 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1259; Calibrated: 1/14/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 600/y (transversal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 27.58 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 38.01 dB ABM1 comp = -7.07 dBA/m BWC Factor = 0.16 dB Location: 3.8, -12.1, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 15

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 3/5/2015 CDMA2000 BC10 (with Smart Cover) Communication System: UID 0, CDMA2000 (0); Frequency: 820.5 MHz;Duty Cycle: 1:1 T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 580/z (axial) wideband at best S/N/ABM Freq Resp(x,y,z,f) (1x1x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_300-3000_2s.wav Output Gain: 54.45 Measure Window Start: 300ms Measure Window Length: 2000ms BWC applied: 10.80 dB Device Reference Point: 0, 0, -6.3 mm Telephone parameters WD signal quality Category [(signal+noise)-to-noise ratio in decibels] Category T1 0 dB to 10 dB Category T2 10 dB to 20 dB Category T3 20 dB to 30 dB Category T4 > 30 dB Cursor: Diff = 2.00 dB BWC Factor = 10.80 dB Location: 3.7, -17.4, 3.7 mm Plot No. 16

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 3/5/2015 CDMA2000 BC10 (with Smart Cover) Communication System: UID 0, CDMA2000 (0); Frequency: 820.5 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3092; ; Calibrated: 7/18/2014 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1259; Calibrated: 1/14/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 580/z (axial) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 27.58 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 38.55 dB ABM1 comp = -1.35 dBA/m BWC Factor = 0.16 dB Location: 3.8, -17.5, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 17

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 3/5/2015 CDMA2000 BC10 (with Smart Cover) Communication System: UID 0, CDMA2000 (0); Frequency: 820.5 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3092; ; Calibrated: 7/18/2014 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1259; Calibrated: 1/14/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 580/y (transversal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 27.58 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 40.99 dB ABM1 comp = -6.29 dBA/m BWC Factor = 0.16 dB Location: 6.7, -12.1, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 18

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 3/6/2015 CDMA2000 BC0 (without Stylus) Communication System: UID 0, CDMA2000 (0); Frequency: 836.52 MHz;Duty Cycle: 1:1 T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 384/z (axial) wideband at best S/N/ABM Freq Resp(x,y,z,f) (1x1x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_300-3000_2s.wav Output Gain: 54.45 Measure Window Start: 300ms Measure Window Length: 2000ms BWC applied: 10.80 dB Device Reference Point: 0, 0, -6.3 mm Telephone parameters WD signal quality Category [(signal+noise)-to-noise ratio in decibels] Category T1 0 dB to 10 dB Category T2 10 dB to 20 dB Category T3 20 dB to 30 dB Category T4 > 30 dB Cursor: Diff = 1.39 dB BWC Factor = 10.80 dB Location: 4.4, -17.1, 3.7 mm Plot No. 19

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 3/6/2015 CDMA2000 BC0 (without Stylus) Communication System: UID 0, CDMA2000 (0); Frequency: 836.52 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3092; ; Calibrated: 7/18/2014 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1259; Calibrated: 1/14/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 384/z (axial) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 27.58 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 41.89 dB ABM1 comp = 2.87 dBA/m BWC Factor = 0.16 dB Location: 4.6, -17.1, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 20

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 3/6/2015 CDMA2000 BC0 (without Stylus) Communication System: UID 0, CDMA2000 (0); Frequency: 836.52 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3092; ; Calibrated: 7/18/2014 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1259; Calibrated: 1/14/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 384/y (transversal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 27.58 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 41.57 dB ABM1 comp = -2.92 dBA/m BWC Factor = 0.16 dB Location: 4.2, -12.1, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 21

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 3/6/2015 CDMA2000 BC1 (without Stylus) Communication System: UID 0, CDMA2000 (0); Frequency: 1880 MHz;Duty Cycle: 1:1 T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 600/z (axial) wideband at best S/N/ABM Freq Resp(x,y,z,f) (1x1x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_300-3000_2s.wav Output Gain: 54.45 Measure Window Start: 300ms Measure Window Length: 2000ms BWC applied: 10.80 dB Device Reference Point: 0, 0, -6.3 mm Telephone parameters WD signal quality Category [(signal+noise)-to-noise ratio in decibels] Category T1 0 dB to 10 dB Category T2 10 dB to 20 dB Category T3 20 dB to 30 dB Category T4 > 30 dB Cursor: Diff = 1.59 dB BWC Factor = 10.80 dB Location: 4.2, -16.9, 3.7 mm Plot No. 22

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 3/6/2015 CDMA2000 BC1 (without Stylus) Communication System: UID 0, CDMA2000 (0); Frequency: 1880 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3092; ; Calibrated: 7/18/2014 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1259; Calibrated: 1/14/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 600/z (axial) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 27.58 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 43.35 dB ABM1 comp = -2.32 dBA/m BWC Factor = 0.16 dB Location: 4.2, -17.1, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 23

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 3/6/2015 CDMA2000 BC1 (without Stylus) Communication System: UID 0, CDMA2000 (0); Frequency: 1880 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3092; ; Calibrated: 7/18/2014 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1259; Calibrated: 1/14/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 600/y (transversal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 27.58 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 37.98 dB ABM1 comp = -9.59 dBA/m BWC Factor = 0.16 dB Location: 4.6, -12.1, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 24

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 3/6/2015 CDMA2000 BC10 (without Stylus) Communication System: UID 0, CDMA2000 (0); Frequency: 820.5 MHz;Duty Cycle: 1:1 T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 580/z (axial) wideband at best S/N/ABM Freq Resp(x,y,z,f) (1x1x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_300-3000_2s.wav Output Gain: 54.45 Measure Window Start: 300ms Measure Window Length: 2000ms BWC applied: 10.80 dB Device Reference Point: 0, 0, -6.3 mm Telephone parameters WD signal quality Category [(signal+noise)-to-noise ratio in decibels] Category T1 0 dB to 10 dB Category T2 10 dB to 20 dB Category T3 20 dB to 30 dB Category T4 > 30 dB Cursor: Diff = 2.00 dB BWC Factor = 10.80 dB Location: 4.4, -16.8, 3.7 mm Plot No. 25

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 3/6/2015 CDMA2000 BC10 (without Stylus) Communication System: UID 0, CDMA2000 (0); Frequency: 820.5 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3092; ; Calibrated: 7/18/2014 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1259; Calibrated: 1/14/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 580/z (axial) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 27.58 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 42.43 dB ABM1 comp = 3.51 dBA/m BWC Factor = 0.16 dB Location: 4.6, -16.7, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 26

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 3/6/2015 CDMA2000 BC10 (without Stylus) Communication System: UID 0, CDMA2000 (0); Frequency: 820.5 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3092; ; Calibrated: 7/18/2014 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1259; Calibrated: 1/14/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 580/y (transversal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 27.58 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 40.83 dB ABM1 comp = -2.69 dBA/m BWC Factor = 0.16 dB Location: 6.7, -12.1, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 27


Document Created: 2015-03-13 01:52:44
Document Modified: 2015-03-13 01:52:44
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC