SAR Test report Part3

FCC ID: ZNFLS770

RF Exposure Info

Download: PDF
FCCID_2576236

Test Laboratory: UL Verification Services Inc., SAR Lab 3 Date/Time: 3/3/2015 11:38:17 PM CDMA BC0 Frequency: 848.31 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used (interpolated): f = 848.31 MHz; σ = 1.027 S/m; ε r = 53.455; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1380; Calibrated: 7/23/2014 - Probe: EX3DV4 - SN3773; ConvF(8.77, 8.77, 8.77); Calibrated: 4/22/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 (A); Type: QDOVA001BB; Serial: 1213 Rear/1xRTT_RC3 SO32_ch 777/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.42 W/kg Rear/1xRTT_RC3 SO32_ch 777/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 37.65 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 1.94 W/kg SAR(1 g) = 1.09 W/kg; SAR(10 g) = 0.602 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.44 W/kg 0 dB = 1.44 W/kg = 1.58 dBW/kg Plot No. 1

Test Laboratory: UL Verification Services Inc., SAR Lab 3 Date/Time: 3/4/2015 1:07:56 PM CDMA BC0 Frequency: 836.52 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used (interpolated): f = 836.52 MHz; σ = 0.895 S/m; ε r = 39.732; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1380; Calibrated: 7/23/2014 - Probe: EX3DV4 - SN3773; ConvF(8.91, 8.91, 8.91); Calibrated: 4/22/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM with CRP; Type: QD000P40CD; Serial: 1768 RHS (with case)/Touch_ 1xRTT_RC3 SO55_ch 384/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.551 W/kg RHS (with case)/Touch_ 1xRTT_RC3 SO55_ch 384/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 25.52 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 0.642 W/kg SAR(1 g) = 0.499 W/kg; SAR(10 g) = 0.380 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.566 W/kg 0 dB = 0.566 W/kg = -2.47 dBW/kg Plot No. 2

Test Laboratory: UL Verification Services Inc., SAR Lab 5 Date/Time: 3/4/2015 8:03:06 PM CDMA BC1 Frequency: 1880 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used: f = 1880 MHz; σ = 1.487 S/m; ε r = 50.781; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1439; Calibrated: 5/14/2014 - Probe: EX3DV4 - SN3991; ConvF(7.65, 7.65, 7.65); Calibrated: 5/16/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 (B); Type: QDOVA002AA; Serial: TP:1257 Front/1xRTT RC3 SO32 ch_600/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.813 W/kg Front/1xRTT RC3 SO32 ch_600/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 23.62 V/m; Power Drift = 0.07 dB Peak SAR (extrapolated) = 1.23 W/kg SAR(1 g) = 0.718 W/kg; SAR(10 g) = 0.415 W/kg Maximum value of SAR (measured) = 0.929 W/kg 0 dB = 0.929 W/kg = -0.32 dBW/kg Plot No. 3

Test Laboratory: UL Verification Services Inc., SAR Lab 5 Date/Time: 3/5/2015 12:31:24 PM CDMA BC1 Frequency: 1880 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used: f = 1880 MHz; σ = 1.394 S/m; ε r = 38.992; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1439; Calibrated: 5/14/2014 - Probe: EX3DV4 - SN3991; ConvF(8.55, 8.55, 8.55); Calibrated: 5/16/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: TWIN SAM v5.0; Type: QD000P40CD; Serial: TP:1829 LHS/Touch_1xRTT RC3 SO55 ch_600 w/o Stylus/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.728 W/kg LHS/Touch_1xRTT RC3 SO55 ch_600 w/o Stylus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 22.84 V/m; Power Drift = 0.07 dB Peak SAR (extrapolated) = 1.06 W/kg SAR(1 g) = 0.681 W/kg; SAR(10 g) = 0.414 W/kg Maximum value of SAR (measured) = 0.831 W/kg 0 dB = 0.831 W/kg = -0.80 dBW/kg Plot No. 4

Test Laboratory: UL Verification Services Inc., SAR Lab 3 Date/Time: 3/9/2015 5:41:44 PM CDMA BC10 Frequency: 820.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used (interpolated): f = 820.5 MHz; σ = 0.879 S/m; ε r = 41.049; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1380; Calibrated: 7/23/2014 - Probe: EX3DV4 - SN3773; ConvF(8.91, 8.91, 8.91); Calibrated: 4/22/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM with CRP; Type: QD000P40CD; Serial: 1768 RHS (with case)/Touch_ 1xEVDO_Rel.0_ch 580/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.496 W/kg RHS (with case)/Touch_ 1xEVDO_Rel.0_ch 580/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 24.11 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 0.566 W/kg SAR(1 g) = 0.456 W/kg; SAR(10 g) = 0.354 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.506 W/kg 0 dB = 0.506 W/kg = -2.96 dBW/kg Plot No. 5

Test Laboratory: UL Verification Services Inc., SAR Lab 3 Date/Time: 3/6/2015 7:24:47 PM CDMA BC10 Frequency: 820.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used (interpolated): f = 820.5 MHz; σ = 0.994 S/m; ε r = 53.429; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1380; Calibrated: 7/23/2014 - Probe: EX3DV4 - SN3773; ConvF(8.77, 8.77, 8.77); Calibrated: 4/22/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 (A); Type: QDOVA001BB; Serial: 1213 Rear (with case)/1xRTT_RC3 SO32_ch 580/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.758 W/kg Rear (with case)/1xRTT_RC3 SO32_ch 580/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 27.94 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 1.12 W/kg SAR(1 g) = 0.644 W/kg; SAR(10 g) = 0.369 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.837 W/kg Rear (with case)/1xRTT_RC3 SO32_ch 580/Zoom Scan 2 (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 27.94 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 0.708 W/kg SAR(1 g) = 0.559 W/kg; SAR(10 g) = 0.425 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.631 W/kg 0 dB = 0.631 W/kg = -2.00 dBW/kg Plot No. 6

Test Laboratory: UL Verification Services Inc., SAR Lab 5 Date/Time: 3/10/2015 10:55:46 AM LTE Band 4 Frequency: 1732.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used (interpolated): f = 1732.5 MHz; σ = 1.494 S/m; ε r = 51.893; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1439; Calibrated: 5/14/2014 - Probe: EX3DV4 - SN3991; ConvF(8.08, 8.08, 8.08); Calibrated: 5/16/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 (A); Type: QDOVA001BB; Serial: 1213 Front/QPSK RB 1/0 ch_20175/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.605 W/kg Front/QPSK RB 1/0 ch_20175/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 21.24 V/m; Power Drift = -0.07 dB Peak SAR (extrapolated) = 0.830 W/kg SAR(1 g) = 0.571 W/kg; SAR(10 g) = 0.380 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.690 W/kg 0 dB = 0.690 W/kg = -1.61 dBW/kg Plot No. 7

Test Laboratory: UL Verification Services Inc., SAR Lab 5 Date/Time: 3/10/2015 5:11:52 PM LTE Band 4 Frequency: 1882.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used (interpolated): f = 1882.5 MHz; σ = 1.518 S/m; ε r = 38.765; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1439; Calibrated: 5/14/2014 - Probe: EX3DV4 - SN3991; ConvF(8.55, 8.55, 8.55); Calibrated: 5/16/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: TWIN SAM v5.0; Type: QD000P40CD; Serial: TP:1829 LHS/Touch_QPSK RB 1/0 ch_20175 w/o Stylus/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.498 W/kg LHS/Touch_QPSK RB 1/0 ch_20175 w/o Stylus/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 18.37 V/m; Power Drift = 0.20 dB Peak SAR (extrapolated) = 0.686 W/kg SAR(1 g) = 0.461 W/kg; SAR(10 g) = 0.295 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.559 W/kg 0 dB = 0.559 W/kg = -2.53 dBW/kg Plot No. 8

Test Laboratory: UL Verification Services Inc. SAR Lab G Date/Time: 3/6/2015 12:09:20 PM LTE Band 12 Frequency: 707.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used (interpolated): f = 707.5 MHz; σ = 0.97 S/m; ε r = 54.039; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1434; Calibrated: 4/14/2014 - Probe: EX3DV4 - SN3686; ConvF(8.7, 8.7, 8.7); Calibrated: 2/23/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI A; Type: QDOVA002AA; Serial: 1258 Rear/QPSK RB 1/24 ch_23095/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.488 W/kg Rear/QPSK RB 1/24 ch_23095/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 23.191 V/m; Power Drift = -0.00 dB Peak SAR (extrapolated) = 0.563 W/kg SAR(1 g) = 0.460 W/kg; SAR(10 g) = 0.355 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.509 W/kg Rear/QPSK RB 1/24 ch_23095/Zoom Scan 2 (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 23.191 V/m; Power Drift = -0.00 dB Peak SAR (extrapolated) = 0.463 W/kg SAR(1 g) = 0.300 W/kg; SAR(10 g) = 0.205 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.373 W/kg 0 dB = 0.373 W/kg = -4.28 dBW/kg Plot No. 9

Test Laboratory: UL Verification Services Inc. SAR Lab G Date/Time: 3/6/2015 2:15:55 PM LTE Band 12 Frequency: 707.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used (interpolated): f = 707.5 MHz; σ = 0.97 S/m; ε r = 54.039; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1434; Calibrated: 4/14/2014 - Probe: EX3DV4 - SN3686; ConvF(8.7, 8.7, 8.7); Calibrated: 2/23/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI A; Type: QDOVA002AA; Serial: 1258 Edge 2/QPSK RB 1/24 ch_23095/Area Scan (7x15x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.560 W/kg Edge 2/QPSK RB 1/24 ch_23095/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 24.045 V/m; Power Drift = -0.00 dB Peak SAR (extrapolated) = 0.721 W/kg SAR(1 g) = 0.516 W/kg; SAR(10 g) = 0.369 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.612 W/kg 0 dB = 0.612 W/kg = -2.13 dBW/kg Plot No. 10

Test Laboratory: UL Verification Services Inc. SAR Lab G Date/Time: 3/6/2015 5:57:50 PM LTE Band 12 Frequency: 707.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used (interpolated): f = 707.5 MHz; σ = 0.887 S/m; ε r = 40.48; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1434; Calibrated: 4/14/2014 - Probe: EX3DV4 - SN3686; ConvF(8.88, 8.88, 8.88); Calibrated: 2/23/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM A; Type: SAM; Serial: 1831 RHS/Touch_QPSK RB 1/24 ch_23095 w/Cover/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.185 W/kg RHS/Touch_QPSK RB 1/24 ch_23095 w/Cover/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 14.474 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 0.209 W/kg SAR(1 g) = 0.174 W/kg; SAR(10 g) = 0.138 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.190 W/kg 0 dB = 0.190 W/kg = -7.21 dBW/kg Plot No. 11

Test Laboratory: UL Verification Services Inc., SAR Lab 5 Date/Time: 3/4/2015 6:10:08 PM LTE Band 25 Frequency: 1882.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used (interpolated): f = 1882.5 MHz; σ = 1.491 S/m; ε r = 50.721; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1439; Calibrated: 5/14/2014 - Probe: EX3DV4 - SN3991; ConvF(7.65, 7.65, 7.65); Calibrated: 5/16/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 (B); Type: QDOVA002AA; Serial: TP:1257 Front/QPSK RB 1/0 ch_26365/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.811 W/kg Front/QPSK RB 1/0 ch_26365/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 23.61 V/m; Power Drift = -0.07 dB Peak SAR (extrapolated) = 1.14 W/kg SAR(1 g) = 0.666 W/kg; SAR(10 g) = 0.387 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.809 W/kg 0 dB = 0.809 W/kg = -0.92 dBW/kg Plot No. 12

Test Laboratory: UL Verification Services Inc., SAR Lab 5 Date/Time: 3/5/2015 11:42:30 AM LTE Band 25 Frequency: 1882.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used (interpolated): f = 1882.5 MHz; σ = 1.398 S/m; ε r = 38.94; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1439; Calibrated: 5/14/2014 - Probe: EX3DV4 - SN3991; ConvF(8.55, 8.55, 8.55); Calibrated: 5/16/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: TWIN SAM v5.0; Type: QD000P40CD; Serial: TP:1829 LHS/Touch_QPSK RB 1/0 ch_26365 w/ Cover/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.620 W/kg LHS/Touch_QPSK RB 1/0 ch_26365 w/ Cover/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 21.45 V/m; Power Drift = -0.10 dB Peak SAR (extrapolated) = 0.907 W/kg SAR(1 g) = 0.596 W/kg; SAR(10 g) = 0.366 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.732 W/kg 0 dB = 0.732 W/kg = -1.35 dBW/kg Plot No. 13

Test Laboratory: UL Verification Services Inc. SAR Lab G Date/Time: 3/11/2015 11:21:25 AM LTE Band 26 Frequency: 819 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used (interpolated): f = 819 MHz; σ = 1.008 S/m; ε r = 52.852; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1434; Calibrated: 4/14/2014 - Probe: EX3DV4 - SN3686; ConvF(8.49, 8.49, 8.49); Calibrated: 2/23/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI A; Type: QDOVA002AA; Serial: 1258 Rear/QPSK RB 1/0 ch 26865/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.602 W/kg Rear/QPSK RB 1/0 ch 26865/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 24.657 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 0.863 W/kg SAR(1 g) = 0.495 W/kg; SAR(10 g) = 0.281 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.656 W/kg Rear/QPSK RB 1/0 ch 26865/Zoom Scan 2 (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 24.657 V/m; Power Drift = 0.11 dB Peak SAR (extrapolated) = 0.526 W/kg SAR(1 g) = 0.413 W/kg; SAR(10 g) = 0.317 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.467 W/kg 0 dB = 0.467 W/kg = -3.31 dBW/kg Plot No. 14

Test Laboratory: UL Verification Services Inc. SAR Lab G Date/Time: 3/11/2015 5:47:25 PM LTE Band 26 Frequency: 831.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used (interpolated): f = 831.5 MHz; σ = 0.928 S/m; ε r = 40.032; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1434; Calibrated: 4/14/2014 - Probe: EX3DV4 - SN3686; ConvF(8.65, 8.65, 8.65); Calibrated: 2/23/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM A; Type: SAM; Serial: 1831 RHS/Touch_QPSK RB 1/0 ch 26865 w/ Cover/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.438 W/kg RHS/Touch_QPSK RB 1/0 ch 26865 w/ Cover/Zoom Scan (6x6x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 21.628 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 0.482 W/kg SAR(1 g) = 0.408 W/kg; SAR(10 g) = 0.331 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.442 W/kg 0 dB = 0.442 W/kg = -3.55 dBW/kg Plot No. 15

Test Laboratory: UL Verification Services Inc. SAR Lab G Date/Time: 3/5/2015 4:14:51 PM LTE Band 41 Frequency: 2593 MHz; Duty Cycle: 1:1.59956; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used (interpolated): f = 2593 MHz; σ = 2.017 S/m; ε r = 37.877; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1434; Calibrated: 4/14/2014 - Probe: EX3DV4 - SN3686; ConvF(6.57, 6.57, 6.57); Calibrated: 2/23/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM A; Type: SAM; Serial: 1831 RHS/Touch_QPSK_ch 40620 RB 1/0 w/o Stylus/Area Scan (9x15x1): Measurement grid: dx=12mm, dy=12mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.125 W/kg RHS/Touch_QPSK_ch 40620 RB 1/0 w/o Stylus/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 7.599 V/m; Power Drift = -0.13 dB Peak SAR (extrapolated) = 0.185 W/kg SAR(1 g) = 0.099 W/kg; SAR(10 g) = 0.053 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.133 W/kg 0 dB = 0.133 W/kg = -8.76 dBW/kg Plot No. 16

Test Laboratory: UL Verification Services Inc. SAR Lab G Date/Time: 3/5/2015 8:46:36 PM LTE Band 41 Frequency: 2593 MHz; Duty Cycle: 1:1.59956; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used (interpolated): f = 2593 MHz; σ = 2.137 S/m; ε r = 50.635; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1434; Calibrated: 4/14/2014 - Probe: EX3DV4 - SN3686; ConvF(6.56, 6.56, 6.56); Calibrated: 2/23/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI A; Type: QDOVA002AA; Serial: 1258 Edge 3/QPSK RB 1/0 ch 40620 Case/Area Scan (8x11x1): Measurement grid: dx=12mm, dy=12mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.741 W/kg Edge 3/QPSK RB 1/0 ch 40620 Case/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 18.626 V/m; Power Drift = 0.20 dB Peak SAR (extrapolated) = 1.37 W/kg SAR(1 g) = 0.663 W/kg; SAR(10 g) = 0.309 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.933 W/kg 0 dB = 0.933 W/kg = -0.30 dBW/kg Plot No. 17

Test Laboratory: UL Verification Services Inc. SAR Lab G Date/Time: 3/3/2015 7:31:06 PM Wi-Fi 2.4GHz Frequency: 2437 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used (interpolated): f = 2437 MHz; σ = 1.856 S/m; ε r = 38.443; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1434; Calibrated: 4/14/2014 - Probe: EX3DV4 - SN3990; ConvF(7.65, 7.65, 7.65); Calibrated: 4/15/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM A; Type: SAM; Serial: 1831 LHS/Touch_802.11b_ch 6 w/0 Stylus/Area Scan (10x17x1): Measurement grid: dx=12mm, dy=12mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.613 W/kg LHS/Touch_802.11b_ch 6 w/0 Stylus/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 17.285 V/m; Power Drift = -0.00 dB Peak SAR (extrapolated) = 1.02 W/kg SAR(1 g) = 0.432 W/kg; SAR(10 g) = 0.194 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.635 W/kg 0 dB = 0.635 W/kg = -1.97 dBW/kg Plot No. 18

Test Laboratory: UL Verification Services Inc. SAR Lab G Date/Time: 3/3/2015 9:05:27 PM Wi-Fi 2.4GHz Frequency: 2437 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used (interpolated): f = 2437 MHz; σ = 1.901 S/m; ε r = 50.526; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1434; Calibrated: 4/14/2014 - Probe: EX3DV4 - SN3990; ConvF(7.46, 7.46, 7.46); Calibrated: 4/15/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI A; Type: QDOVA002AA; Serial: 1258 Rear/802.11b_ch 6 w/o Stylus/Area Scan (10x16x1): Measurement grid: dx=12mm, dy=12mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.250 W/kg Rear/802.11b_ch 6 w/o Stylus/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 10.214 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 0.387 W/kg SAR(1 g) = 0.167 W/kg; SAR(10 g) = 0.077 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.255 W/kg 0 dB = 0.255 W/kg = -5.93 dBW/kg Plot No. 19

Test Laboratory: UL Verification Services Inc., SAR Lab 5 Date/Time: 3/13/2015 6:19:59 PM Wi-Fi 5GHz Frequency: 5310 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used: f = 5310 MHz; σ = 4.761 S/m; ε r = 35.327; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1439; Calibrated: 5/14/2014 - Probe: EX3DV4 - SN3991; ConvF(4.96, 4.96, 4.96); Calibrated: 5/16/2014; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Phantom: TWIN SAM v5.0; Type: QD000P40CD; Serial: TP:1829 LHS/Touch_802.11n_Ch 62 w/o stylus/Area Scan (11x19x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.726 W/kg LHS/Touch_802.11n_Ch 62 w/o stylus/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 13.13 V/m; Power Drift = -0.10 dB Peak SAR (extrapolated) = 1.94 W/kg SAR(1 g) = 0.462 W/kg; SAR(10 g) = 0.146 W/kg Maximum value of SAR (measured) = 0.904 W/kg 0 dB = 0.904 W/kg = -0.44 dBW/kg Plot No. 20

Test Laboratory: UL Verification Services Inc., SAR Lab 5 Date/Time: 3/12/2015 10:50:06 PM Wi-Fi 5GHz Frequency: 5310 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used: f = 5310 MHz; σ = 5.632 S/m; ε r = 47.702; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1439; Calibrated: 5/14/2014 - Probe: EX3DV4 - SN3991; ConvF(4.47, 4.47, 4.47); Calibrated: 5/16/2014; - Sensor-Surface: 2mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2mm (Mechanical Surface Detection) - Phantom: ELI v5.0 (A); Type: QDOVA001BB; Serial: 1213 Rear/802.11n (HT40)_Ch 62 w/o stylus/Area Scan (12x19x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.312 W/kg Rear/802.11n (HT40)_Ch 62 w/o stylus/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 7.173 V/m; Power Drift = 0.10 dB Peak SAR (extrapolated) = 0.631 W/kg SAR(1 g) = 0.161 W/kg; SAR(10 g) = 0.058 W/kg Maximum value of SAR (measured) = 0.304 W/kg 0 dB = 0.304 W/kg = -5.17 dBW/kg Plot No. 21

Test Laboratory: UL Verification Services Inc., SAR Lab 5 Date/Time: 3/13/2015 5:42:44 PM Wi-Fi 5GHz Frequency: 5670 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used: f = 5670 MHz; σ = 5.128 S/m; ε r = 34.9; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1439; Calibrated: 5/14/2014 - Probe: EX3DV4 - SN3991; ConvF(4.73, 4.73, 4.73); Calibrated: 5/16/2014; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Phantom: TWIN SAM v5.0; Type: QD000P40CD; Serial: TP:1829 LHS/Touch_802.11n_Ch 134 w/o stylus/Area Scan (11x19x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.558 W/kg LHS/Touch_802.11n_Ch 134 w/o stylus/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 10.50 V/m; Power Drift = 0.13 dB Peak SAR (extrapolated) = 1.42 W/kg SAR(1 g) = 0.308 W/kg; SAR(10 g) = 0.092 W/kg Maximum value of SAR (measured) = 0.642 W/kg 0 dB = 0.642 W/kg = -1.92 dBW/kg Plot No. 22

Test Laboratory: UL Verification Services Inc., SAR Lab 5 Date/Time: 3/12/2015 11:23:37 PM Wi-Fi 5GHz Frequency: 5670 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used: f = 5670 MHz; σ = 6.092 S/m; ε r = 47.083; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1439; Calibrated: 5/14/2014 - Probe: EX3DV4 - SN3991; ConvF(4.41, 4.41, 4.41); Calibrated: 5/16/2014; - Sensor-Surface: 2mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2mm (Mechanical Surface Detection) - Phantom: ELI v5.0 (A); Type: QDOVA001BB; Serial: 1213 Rear/802.11n (HT40)_Ch 134 w/o stylus/Area Scan (12x19x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.230 W/kg Rear/802.11n (HT40)_Ch 134 w/o stylus/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 5.515 V/m; Power Drift = 0.19 dB Peak SAR (extrapolated) = 0.495 W/kg SAR(1 g) = 0.111 W/kg; SAR(10 g) = 0.036 W/kg Maximum value of SAR (measured) = 0.240 W/kg 0 dB = 0.240 W/kg = -6.20 dBW/kg Plot No. 23

Test Laboratory: UL Verification Services Inc., SAR Lab 5 Date/Time: 3/13/2015 5:07:38 PM Wi-Fi 5GHz Frequency: 5795 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used: f = 5795 MHz; σ = 5.248 S/m; ε r = 34.599; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1439; Calibrated: 5/14/2014 - Probe: EX3DV4 - SN3991; ConvF(4.66, 4.66, 4.66); Calibrated: 5/16/2014; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Phantom: TWIN SAM v5.0; Type: QD000P40CD; Serial: TP:1829 LHS/Touch_802.11n_Ch 159 w/o stylus/Area Scan (11x19x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.815 W/kg LHS/Touch_802.11n_Ch 159 w/o stylus/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 12.22 V/m; Power Drift = 0.13 dB Peak SAR (extrapolated) = 1.91 W/kg SAR(1 g) = 0.399 W/kg; SAR(10 g) = 0.116 W/kg Maximum value of SAR (measured) = 0.854 W/kg 0 dB = 0.854 W/kg = -0.69 dBW/kg Plot No. 24

Test Laboratory: UL Verification Services Inc., SAR Lab 5 Date/Time: 3/12/2015 7:26:55 PM Wi-Fi 5GHz Frequency: 5795 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used: f = 5795 MHz; σ = 6.226 S/m; ε r = 46.997; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1439; Calibrated: 5/14/2014 - Probe: EX3DV4 - SN3991; ConvF(4.32, 4.32, 4.32); Calibrated: 5/16/2014; - Sensor-Surface: 2mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2mm (Mechanical Surface Detection) - Phantom: ELI v5.0 (A); Type: QDOVA001BB; Serial: 1213 Rear/802.11n (HT40)_Ch 159 w/o stylus/Area Scan (12x19x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.210 W/kg Rear/802.11n (HT40)_Ch 159 w/o stylus/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 5.595 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 0.427 W/kg SAR(1 g) = 0.101 W/kg; SAR(10 g) = 0.031 W/kg Maximum value of SAR (measured) = 0.214 W/kg 0 dB = 0.214 W/kg = -6.70 dBW/kg Plot No. 25


Document Created: 2015-03-16 22:40:54
Document Modified: 2015-03-16 22:40:54
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC