SAR Test Report3

FCC ID: ZNFLS751

RF Exposure Info

Download: PDF
FCCID_2618013

Test Laboratory: UL Verification Services Inc. SAR Lab E Date/Time: 4/24/2015 11:56:09 AM CDMA BC0 Frequency: 836.52 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 836.52 MHz; σ = 0.917 S/m; ε r = 42.173; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1257; Calibrated: 9/29/2014 - Probe: EX3DV4 - SN3772; ConvF(8.58, 8.58, 8.58); Calibrated: 2/23/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM with CRP; Type: SAM; RHS/Touch_1xEVDO_Rel. 0_Ch 384/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.695 W/kg RHS/Touch_1xEVDO_Rel. 0_Ch 384/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 27.178 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 0.774 W/kg SAR(1 g) = 0.644 W/kg; SAR(10 g) = 0.501 W/kg Maximum value of SAR (measured) = 0.708 W/kg 0 dB = 0.708 W/kg = -1.50 dBW/kg Plot No. 1

Test Laboratory: UL Verification Services Inc. SAR Lab E Date/Time: 4/23/2015 12:09:36 PM CDMA BC0 Frequency: 836.52 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 836.52 MHz; σ = 0.996 S/m; ε r = 54.629; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1257; Calibrated: 9/29/2014 - Probe: EX3DV4 - SN3772; ConvF(8.46, 8.46, 8.46); Calibrated: 2/23/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 A; Type: QD OVA 002 AA; Serial: 1180 Front/1xRTT_RC3 SO32_Ch 384/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.862 W/kg Front/1xRTT_RC3 SO32_Ch 384/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 29.874 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 0.963 W/kg SAR(1 g) = 0.783 W/kg; SAR(10 g) = 0.609 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.871 W/kg 0 dB = 0.871 W/kg = -0.60 dBW/kg Plot No. 2

Test Laboratory: UL Verification Services Inc. SAR Lab F Date/Time: 4/20/2015 10:48:05 PM CDMA BC1 Frequency: 1880 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used: f = 1880 MHz; σ = 1.425 S/m; εr = 40.212; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1359; Calibrated: 2/18/2015 - Probe: EX3DV4 - SN3936; ConvF(7.61, 7.61, 7.61); Calibrated: 7/24/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM with CRP; Type: QD000P40CA; Serial: 1185 LHS/Touch_1xEVDO ch.600/Area Scan (7x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.923 W/kg LHS/Touch_1xEVDO ch.600/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 25.221 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 1.26 W/kg SAR(1 g) = 0.800 W/kg; SAR(10 g) = 0.501 W/kg Maximum value of SAR (measured) = 0.985 W/kg 0 dB = 0.985 W/kg = -0.07 dBW/kg Plot No. 3

Test Laboratory: UL Verification Services Inc. SAR Lab A Date/Time: 4/27/2015 6:19:26 PM CDMA BC1 Frequency: 1880 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used: f = 1880 MHz; σ = 1.54 S/m; εr = 53.006; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1357; Calibrated: 2/20/2015 - Probe: EX3DV4 - SN3901; ConvF(7.68, 7.68, 7.68); Calibrated: 1/27/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v4.0 (B); Type: QDOVA001BB; Serial: 1099 Rear/1xRTT_ch 600/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.909 W/kg Rear/1xRTT_ch 600/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 24.77 V/m; Power Drift = -0.16 dB Peak SAR (extrapolated) = 1.14 W/kg SAR(1 g) = 0.765 W/kg; SAR(10 g) = 0.508 W/kg Maximum value of SAR (measured) = 0.913 W/kg 0 dB = 0.913 W/kg = -0.40 dBW/kg Plot No. 4

Test Laboratory: UL Verification Services Inc. SAR Lab E Date/Time: 4/22/2015 10:24:57 PM CDMA BC10 Frequency: 820.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 820.5 MHz; σ = 0.896 S/m; εr = 42.119; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1257; Calibrated: 9/29/2014 - Probe: EX3DV4 - SN3772; ConvF(8.58, 8.58, 8.58); Calibrated: 2/23/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM with CRP; Type: SAM; RHS/Touch_1xEVDO ch.580/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.708 W/kg RHS/Touch_1xEVDO ch.580/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 28.229 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 0.810 W/kg SAR(1 g) = 0.649 W/kg; SAR(10 g) = 0.492 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.728 W/kg 0 dB = 0.728 W/kg = -1.38 dBW/kg Plot No. 5

Test Laboratory: UL Verification Services Inc. SAR Lab E Date/Time: 4/22/2015 12:16:24 PM CDMA BC10 Frequency: 823.1 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 823.1 MHz; σ = 0.98 S/m; εr = 54.657; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1257; Calibrated: 9/29/2014 - Probe: EX3DV4 - SN3772; ConvF(8.46, 8.46, 8.46); Calibrated: 2/23/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 A; Type: QD OVA 002 AA; Serial: 1180 Rear/1xRTT_ch 684/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.891 W/kg Rear/1xRTT_ch 684/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 30.302 V/m; Power Drift = 0.08 dB Peak SAR (extrapolated) = 1.00 W/kg SAR(1 g) = 0.812 W/kg; SAR(10 g) = 0.627 W/kg Maximum value of SAR (measured) = 0.905 W/kg 0 dB = 0.905 W/kg = -0.43 dBW/kg Plot No. 6

Test Laboratory: UL Verification Services Inc. SAR Lab G Date/Time: 4/21/2015 11:14:18 PM LTE Band 4 Frequency: 1732.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 1732.5 MHz; σ = 1.329 S/m; εr = 41.09; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1433; Calibrated: 3/12/2015 - Probe: EX3DV4 - SN3686; ConvF(7.65, 7.65, 7.65); Calibrated: 2/23/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM A; Type: SAM; Serial: 1831 LHS/Touch_QPSK_RB 1,0_Ch 20175/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.398 W/kg LHS/Touch_QPSK_RB 1,0_Ch 20175/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 17.568 V/m; Power Drift = 0.12 dB Peak SAR (extrapolated) = 0.533 W/kg SAR(1 g) = 0.355 W/kg; SAR(10 g) = 0.230 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.428 W/kg 0 dB = 0.428 W/kg = -3.69 dBW/kg Plot No. 7

Test Laboratory: UL Verification Services Inc. SAR Lab G Date/Time: 4/22/2015 11:03:17 AM LTE Band 4 Frequency: 1732.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 1732.5 MHz; σ = 1.452 S/m; εr = 51.653; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1433; Calibrated: 3/12/2015 - Probe: EX3DV4 - SN3686; ConvF(7.28, 7.28, 7.28); Calibrated: 2/23/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 B; Type: QDOVA002AA; Serial: 1248 Rear/QPSK_RB 1,0_Ch 20175/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.730 W/kg Rear/QPSK_RB 1,0_Ch 20175/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 23.124 V/m; Power Drift = 0.16 dB Peak SAR (extrapolated) = 0.947 W/kg SAR(1 g) = 0.637 W/kg; SAR(10 g) = 0.421 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.765 W/kg 0 dB = 0.765 W/kg = -1.16 dBW/kg Plot No. 8

Test Laboratory: UL Verification Services Inc. SAR Lab F Date/Time: 4/22/2015 7:34:20 PM LTE Band 12 Frequency: 707.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 707.5 MHz; σ = 0.853 S/m; εr = 40.905; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1359; Calibrated: 2/18/2015 - Probe: EX3DV4 - SN3936; ConvF(9.64, 9.64, 9.64); Calibrated: 7/24/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM with CRP; Type: SAM; RHS/Touch_QPSK_RB 1/0 ch 23095/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.328 W/kg RHS/Touch_QPSK_RB 1/0 ch 23095/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 19.933 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 0.370 W/kg SAR(1 g) = 0.298 W/kg; SAR(10 g) = 0.230 W/kg Info: Interpolated medium parameters used for SAR evaluation. 0 dB = 0.328 W/kg = -4.84 dBW/kg Plot No. 9

Test Laboratory: UL Verification Services Inc. SAR Lab F Date/Time: 4/22/2015 10:18:12 PM LTE Band 12 Frequency: 707.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 707.5 MHz; σ = 0.941 S/m; εr = 54.394; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1359; Calibrated: 2/18/2015 - Probe: EX3DV4 - SN3936; ConvF(9.33, 9.33, 9.33); Calibrated: 7/24/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 (A); Type: QDOVA001BB; Serial: 1117 Rear/QPSK_RB 1/0 ch. 23095/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.717 W/kg Rear/QPSK_RB 1/0 ch. 23095/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 28.232 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 0.796 W/kg SAR(1 g) = 0.649 W/kg; SAR(10 g) = 0.495 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.724 W/kg 0 dB = 0.724 W/kg = -1.40 dBW/kg Plot No. 10

Test Laboratory: UL Verification Services Inc. SAR Lab F Date/Time: 4/21/2015 3:28:59 PM LTE Band 25 Frequency: 1882.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 1882.5 MHz; σ = 1.426 S/m; εr = 40.197; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1359; Calibrated: 2/18/2015 - Probe: EX3DV4 - SN3936; ConvF(7.61, 7.61, 7.61); Calibrated: 7/24/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM with CRP; Type: SAM; LHS/Touch_QPSK_RB 1/49 ch 26365/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.720 W/kg LHS/Touch_QPSK_RB 1/49 ch 26365/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 22.008 V/m; Power Drift = -0.19 dB Peak SAR (extrapolated) = 0.962 W/kg SAR(1 g) = 0.608 W/kg; SAR(10 g) = 0.381 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.738 W/kg 0 dB = 0.738 W/kg = -1.32 dBW/kg Plot No. 11

Test Laboratory: UL Verification Services Inc. SAR Lab F Date/Time: 4/21/2015 11:40:28 PM LTE Band 25 Frequency: 1905 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used: f = 1905 MHz; σ = 1.58 S/m; εr = 53.29; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1359; Calibrated: 2/18/2015 - Probe: EX3DV4 - SN3936; ConvF(7.15, 7.15, 7.15); Calibrated: 7/24/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 (A); Type: QDOVA001BB; Serial: 1117 Front/QPSK_RB 1/49 ch. 26590/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.11 W/kg Front/QPSK_RB 1/49 ch. 26590/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 26.996 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 1.49 W/kg SAR(1 g) = 0.944 W/kg; SAR(10 g) = 0.589 W/kg Maximum value of SAR (measured) = 1.15 W/kg 0 dB = 1.15 W/kg = 0.61 dBW/kg Plot No. 12

Test Laboratory: UL Verification Services Inc. SAR Lab E Date/Time: 4/21/2015 10:27:52 AM LTE Band 26 Frequency: 831.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 831.5 MHz; σ = 0.907 S/m; εr = 42.047; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1257; Calibrated: 9/29/2014 - Probe: EX3DV4 - SN3772; ConvF(8.58, 8.58, 8.58); Calibrated: 2/23/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM with CRP; Type: SAM; RHS/Touch_QPSK_ 1/37 ch 26865/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.481 W/kg RHS/Touch_QPSK_ 1/37 ch 26865/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 23.112 V/m; Power Drift = -0.17 dB Peak SAR (extrapolated) = 0.542 W/kg SAR(1 g) = 0.446 W/kg; SAR(10 g) = 0.343 W/kg Maximum value of SAR (measured) = 0.497 W/kg 0 dB = 0.497 W/kg = -3.04 dBW/kg Plot No. 13

Test Laboratory: UL Verification Services Inc. SAR Lab E Date/Time: 4/21/2015 3:11:28 PM LTE Band 26 Frequency: 831.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 831.5 MHz; σ = 0.99 S/m; εr = 54.629; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1257; Calibrated: 9/29/2014 - Probe: EX3DV4 - SN3772; ConvF(8.46, 8.46, 8.46); Calibrated: 2/23/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 A; Type: QD OVA 002 AA; Serial: 1180 Rear/QPSK_RB 1/37 ch. 26865/Area Scan (8x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.658 W/kg Rear/QPSK_RB 1/37 ch. 26865/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 26.372 V/m; Power Drift = 0.13 dB Peak SAR (extrapolated) = 0.782 W/kg SAR(1 g) = 0.630 W/kg; SAR(10 g) = 0.483 W/kg Maximum value of SAR (measured) = 0.703 W/kg 0 dB = 0.703 W/kg = -1.53 dBW/kg Plot No. 14

Test Laboratory: UL Verification Services Inc. SAR Lab A Date/Time: 4/23/2015 11:51:53 PM LTE Band 41 Frequency: 2636.5 MHz; Duty Cycle: 1:1.59956; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 2636.5 MHz; σ = 2.205 S/m; εr = 52.003; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1357; Calibrated: 2/20/2015 - Probe: EX3DV4 - SN3901; ConvF(6.97, 6.97, 6.97); Calibrated: 1/27/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM v5.0 (B); Type: QD000P40CD; Serial: 1628 LHS/Touch_QPSK_ch 41055 RB 1/0/Area Scan (9x16x1): Measurement grid: dx=12mm, dy=12mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.06 W/kg LHS/Touch_QPSK_ch 41055 RB 1/0/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 21.86 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 1.65 W/kg SAR(1 g) = 0.857 W/kg; SAR(10 g) = 0.444 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.15 W/kg 0 dB = 1.15 W/kg = 0.61 dBW/kg Plot No. 15

Test Laboratory: UL Verification Services Inc. SAR Lab A Date/Time: 4/24/2015 3:11:51 PM LTE Band 41 Frequency: 2593 MHz; Duty Cycle: 1:1.59956; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 2593 MHz; σ = 2.143 S/m; εr = 52.112; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1357; Calibrated: 2/20/2015 - Probe: EX3DV4 - SN3901; ConvF(6.97, 6.97, 6.97); Calibrated: 1/27/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v4.0 (B); Type: QDOVA001BB; Serial: 1099 Front/QPSK, Ch. 40620 RB 1/0/Area Scan (9x15x1): Measurement grid: dx=12mm, dy=12mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.702 W/kg Front/QPSK, Ch. 40620 RB 1/0/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 18.05 V/m; Power Drift = -0.13 dB Peak SAR (extrapolated) = 1.16 W/kg SAR(1 g) = 0.580 W/kg; SAR(10 g) = 0.317 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.777 W/kg 0 dB = 0.777 W/kg = -1.10 dBW/kg Plot No. 16

Test Laboratory: UL Verification Services Inc. SAR Lab G Date/Time: 4/20/2015 3:57:22 PM Wi-Fi 2.4GHz Frequency: 2437 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 2437 MHz; σ = 1.803 S/m; εr = 38.101; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1433; Calibrated: 3/12/2015 - Probe: EX3DV4 - SN3686; ConvF(6.82, 6.82, 6.82); Calibrated: 2/23/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM A; Type: SAM; Serial: 1831 LHS/Touch_802.11b_ch 6/Area Scan (9x14x1): Measurement grid: dx=12mm, dy=12mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.442 W/kg LHS/Touch_802.11b_ch 6/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 15.798 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 0.797 W/kg SAR(1 g) = 0.354 W/kg; SAR(10 g) = 0.158 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.508 W/kg 0 dB = 0.508 W/kg = -2.94 dBW/kg Plot No. 17

Test Laboratory: UL Verification Services Inc. SAR Lab G Date/Time: 4/20/2015 2:43:01 PM Wi-Fi 2.4GHz Frequency: 2437 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 2437 MHz; σ = 1.953 S/m; εr = 51.722; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1433; Calibrated: 3/12/2015 - Probe: EX3DV4 - SN3686; ConvF(6.84, 6.84, 6.84); Calibrated: 2/23/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI A; Type: QDOVA002AA; Serial: 1258 Rear/802.11b_ch 6/Area Scan 2 (9x14x1): Measurement grid: dx=12mm, dy=12mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.151 W/kg Rear/802.11b_ch 6/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 8.907 V/m; Power Drift = -.05 Peak SAR (extrapolated) = 0.225 W/kg SAR(1 g) = 0.119 W/kg; SAR(10 g) = 0.061 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.159 W/kg 0 dB = 0.159 W/kg = -7.99 dBW/kg Plot No. 18


Document Created: 2015-05-11 14:29:07
Document Modified: 2015-05-11 14:29:07
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC