16I22652-S1V1 SAR_App C Highest SAR Test Plots

FCC ID: ZNFL61AL

RF Exposure Info

Download: PDF
FCCID_2902841

Test Laboratory: UL Verification Services Inc., SAR Lab 1 Date/Time: 1/14/2016 12:08:58 AM GSM 850 Frequency: 836.6 MHz; Duty Cycle: 1:8.00018; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.926 S/m; εr = 41.918; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE3 Sn500; Calibrated: 5/22/2015 - Probe: EX3DV4 - SN7356; ConvF(9.96, 9.96, 9.96); Calibrated: 4/22/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM; Type: QD000P40CD; Serial: TP 1751 RHS/Touch_GSM Voice/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.465 W/kg RHS/Touch_GSM Voice/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 23.127 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 0.514 W/kg SAR(1 g) = 0.422 W/kg; SAR(10 g) = 0.322 W/kg Info: Interpolated medium parameters used for SAR evaluation. 0 dB = 0.465 W/kg = -3.33 dBW/kg Plot No. 1

Test Laboratory: UL Verification Services Inc., SAR Lab 1 Date/Time: 1/14/2016 12:25:44 AM GSM 850 Frequency: 836.6 MHz; Duty Cycle: 1:4.00037; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.926 S/m; εr = 41.918; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE3 Sn500; Calibrated: 5/22/2015 - Probe: EX3DV4 - SN7356; ConvF(9.96, 9.96, 9.96); Calibrated: 4/22/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM; Type: QD000P40CD; Serial: TP 1751 RHS/Touch_GPRS 2 Slots/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.599 W/kg RHS/Touch_GPRS 2 Slots/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 26.017 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 0.648 W/kg SAR(1 g) = 0.533 W/kg; SAR(10 g) = 0.406 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.587 W/kg 0 dB = 0.587 W/kg = -2.31 dBW/kg Plot No. 2

Test Laboratory: UL Verification Services Inc., SAR Lab 1 Date/Time: 1/13/2016 8:12:25 PM GSM 850 Frequency: 836.6 MHz; Duty Cycle: 1:8.00018; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 836.6 MHz; σ = 1.018 S/m; εr = 53.995; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE3 Sn500; Calibrated: 5/22/2015 - Probe: EX3DV4 - SN7356; ConvF(9.97, 9.97, 9.97); Calibrated: 4/22/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI-A v5.0; Type: QDOVA002AA; Serial: TP 1194 Rear/GSM Voice Ch. 190/Area Scan (8x14x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.562 W/kg Rear/GSM Voice Ch. 190/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 23.835 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 0.631 W/kg SAR(1 g) = 0.501 W/kg; SAR(10 g) = 0.382 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.564 W/kg Rear/GSM Voice Ch. 190/Zoom Scan 2 (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 23.835 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 0.367 W/kg SAR(1 g) = 0.218 W/kg; SAR(10 g) = 0.135 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.276 W/kg 0 dB = 0.276 W/kg = -5.59 dBW/kg Plot No. 3

Test Laboratory: UL Verification Services Inc., SAR Lab 1 Date/Time: 1/13/2016 8:45:18 PM GSM 850 Frequency: 836.6 MHz; Duty Cycle: 1:4.00037; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 836.6 MHz; σ = 1.018 S/m; εr = 53.995; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE3 Sn500; Calibrated: 5/22/2015 - Probe: EX3DV4 - SN7356; ConvF(9.97, 9.97, 9.97); Calibrated: 4/22/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI-A v5.0; Type: QDOVA002AA; Serial: TP 1194 Rear/GPRS 2 Slots Ch. 190/Area Scan (8x14x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.620 W/kg Rear/GPRS 2 Slots Ch. 190/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 25.060 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 0.692 W/kg SAR(1 g) = 0.551 W/kg; SAR(10 g) = 0.421 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.617 W/kg Rear/GPRS 2 Slots Ch. 190/Zoom Scan 2 (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 25.060 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 0.400 W/kg SAR(1 g) = 0.238 W/kg; SAR(10 g) = 0.147 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.301 W/kg 0 dB = 0.301 W/kg = -5.21 dBW/kg Plot No. 4

Test Laboratory: UL Verification Services Inc., SAR Lab 3 Date/Time: 1/13/2016 12:36:28 AM GSM 1900 Frequency: 1880 MHz; Duty Cycle: 1:8.00018; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 1880 MHz; σ = 1.399 S/m; εr = 39.132; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1434; Calibrated: 4/16/2015 - Probe: EX3DV4 - SN3749; ConvF(7.34, 7.34, 7.34); Calibrated: 1/26/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM with CRP; Type: SAM; LHS/Touch_GSM_Voice_ch 661/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.298 W/kg LHS/Touch_GSM_Voice_ch 661/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 14.95 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 0.386 W/kg SAR(1 g) = 0.249 W/kg; SAR(10 g) = 0.154 W/kg Maximum value of SAR (measured) = 0.300 W/kg 0 dB = 0.300 W/kg = -5.23 dBW/kg Plot No. 5

Test Laboratory: UL Verification Services Inc., SAR Lab 3 Date/Time: 1/13/2016 10:18:57 AM GSM 1900 Frequency: 1880 MHz; Duty Cycle: 1:8.00018; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 1880 MHz; σ = 1.399 S/m; εr = 39.132; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1434; Calibrated: 4/16/2015 - Probe: EX3DV4 - SN3749; ConvF(7.34, 7.34, 7.34); Calibrated: 1/26/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM with CRP; Type: SAM; LHS/Touch_GPRS 2 slot_ch 661/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.489 W/kg LHS/Touch_GPRS 2 slot_ch 661/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 18.64 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 0.645 W/kg SAR(1 g) = 0.418 W/kg; SAR(10 g) = 0.261 W/kg Maximum value of SAR (measured) = 0.517 W/kg LHS/Touch_GPRS 2 slot_ch 661/Zoom Scan 2 (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 18.64 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 0.457 W/kg SAR(1 g) = 0.313 W/kg; SAR(10 g) = 0.191 W/kg Maximum value of SAR (measured) = 0.381 W/kg 0 dB = 0.381 W/kg = -4.19 dBW/kg Plot No. 6

Test Laboratory: UL Verification Services Inc., SAR Lab 3 Date/Time: 1/13/2016 12:38:03 PM GSM 1900 Frequency: 1880 MHz; Duty Cycle: 1:8.00018; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 1880 MHz; σ = 1.522 S/m; εr = 52.032; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1434; Calibrated: 4/16/2015 - Probe: EX3DV4 - SN3749; ConvF(7.09, 7.09, 7.09); Calibrated: 1/26/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 (A); Type: QDOVA001BB; Serial: 1213 Rear/GSM Voice_ch 661/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.254 W/kg Rear/GSM Voice_ch 661/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 13.04 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 0.314 W/kg SAR(1 g) = 0.210 W/kg; SAR(10 g) = 0.139 W/kg Maximum value of SAR (measured) = 0.253 W/kg 0 dB = 0.253 W/kg = -5.97 dBW/kg Plot No. 7

Test Laboratory: UL Verification Services Inc., SAR Lab 3 Date/Time: 1/13/2016 12:15:39 PM GSM 1900 Frequency: 1880 MHz; Duty Cycle: 1:4.00037; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 1880 MHz; σ = 1.522 S/m; εr = 52.032; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1434; Calibrated: 4/16/2015 - Probe: EX3DV4 - SN3749; ConvF(7.09, 7.09, 7.09); Calibrated: 1/26/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 (A); Type: QDOVA001BB; Serial: 1213 Front/GPRS 2 slot_ch 661/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.378 W/kg Front/GPRS 2 slot_ch 661/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 15.91 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 0.466 W/kg SAR(1 g) = 0.314 W/kg; SAR(10 g) = 0.208 W/kg Maximum value of SAR (measured) = 0.376 W/kg 0 dB = 0.376 W/kg = -4.25 dBW/kg Plot No. 8

Test Laboratory: UL Verification Services Inc., SAR Lab 3 Date/Time: 1/12/2016 10:43:07 PM W-CDMA Band II Frequency: 1880 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 1880 MHz; σ = 1.399 S/m; εr = 39.132; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1434; Calibrated: 4/16/2015 - Probe: EX3DV4 - SN3749; ConvF(7.34, 7.34, 7.34); Calibrated: 1/26/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM with CRP; Type: SAM; LHS/Touch_Rel 99 RMC ch.9400/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.517 W/kg LHS/Touch_Rel 99 RMC ch.9400/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 19.34 V/m; Power Drift = -0.07 dB Peak SAR (extrapolated) = 0.695 W/kg SAR(1 g) = 0.443 W/kg; SAR(10 g) = 0.273 W/kg Maximum value of SAR (measured) = 0.546 W/kg 0 dB = 0.546 W/kg = -2.63 dBW/kg Plot No. 9

Test Laboratory: UL Verification Services Inc., SAR Lab 3 Date/Time: 1/12/2016 9:52:37 PM W-CDMA Band II Frequency: 1880 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 1880 MHz; σ = 1.522 S/m; εr = 52.032; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1434; Calibrated: 4/16/2015 - Probe: EX3DV4 - SN3749; ConvF(7.09, 7.09, 7.09); Calibrated: 1/26/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 (A); Type: QDOVA001BB; Serial: 1213 Rear/Rel 99 RMC ch.9400/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.711 W/kg Rear/Rel 99 RMC ch.9400/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 22.08 V/m; Power Drift = -0.10 dB Peak SAR (extrapolated) = 0.895 W/kg SAR(1 g) = 0.607 W/kg; SAR(10 g) = 0.402 W/kg Maximum value of SAR (measured) = 0.729 W/kg 0 dB = 0.729 W/kg = -1.37 dBW/kg Plot No. 10

Test Laboratory: UL Verification Services Inc., SAR Lab 1 Date/Time: 1/13/2016 5:43:48 PM WCDMA Band V Frequency: 836.6 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.926 S/m; εr = 41.918; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE3 Sn500; Calibrated: 5/22/2015 - Probe: EX3DV4 - SN7356; ConvF(9.96, 9.96, 9.96); Calibrated: 4/22/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM; Type: QD000P40CD; Serial: TP 1751 RHS/Touch_Rel.99 RMC ch_4183/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.531 W/kg RHS/Touch_Rel.99 RMC ch_4183/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 24.262 V/m; Power Drift = 0.14 dB Peak SAR (extrapolated) = 0.573 W/kg SAR(1 g) = 0.471 W/kg; SAR(10 g) = 0.359 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.518 W/kg 0 dB = 0.518 W/kg = -2.86 dBW/kg Plot No. 11

Test Laboratory: UL Verification Services Inc., SAR Lab 1 Date/Time: 1/13/2016 6:31:35 PM W-CDMA Band V Frequency: 836.6 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 836.6 MHz; σ = 1.018 S/m; εr = 53.995; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE3 Sn500; Calibrated: 5/22/2015 - Probe: EX3DV4 - SN7356; ConvF(9.97, 9.97, 9.97); Calibrated: 4/22/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI-A v5.0; Type: QDOVA002AA; Serial: TP 1194 Rear/Rel 99 RMC ch.4183/Area Scan (8x14x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.535 W/kg Rear/Rel 99 RMC ch.4183/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 23.259 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 0.600 W/kg SAR(1 g) = 0.475 W/kg; SAR(10 g) = 0.361 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.533 W/kg Rear/Rel 99 RMC ch.4183/Zoom Scan 2 (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 23.259 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 0.326 W/kg SAR(1 g) = 0.195 W/kg; SAR(10 g) = 0.121 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.241 W/kg 0 dB = 0.241 W/kg = -6.18 dBW/kg Plot No. 12

Test Laboratory: UL Verification Services Inc., SAR Lab 3 Date/Time: 1/21/2016 1:20:43 PM LTE Band 2 Frequency: 1880 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 1880 MHz; σ = 1.392 S/m; εr = 39.113; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1434; Calibrated: 4/16/2015 - Probe: EX3DV4 - SN3773; ConvF(7.31, 7.31, 7.31); Calibrated: 4/22/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM with CRP; Type: SAM; LHS/Touch_ QPSK RB 1/0 ch 18900/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.592 W/kg LHS/Touch_ QPSK RB 1/0 ch 18900/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 21.18 V/m; Power Drift = -0.19 dB Peak SAR (extrapolated) = 0.749 W/kg SAR(1 g) = 0.493 W/kg; SAR(10 g) = 0.312 W/kg Maximum value of SAR (measured) = 0.599 W/kg 0 dB = 0.599 W/kg = -2.23 dBW/kg Plot No. 13

Test Laboratory: UL Verification Services Inc., SAR Lab 3 Date/Time: 1/21/2016 3:25:04 PM LTE Band 2 Frequency: 1880 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 1880 MHz; σ = 1.516 S/m; εr = 52.414; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1434; Calibrated: 4/16/2015 - Probe: EX3DV4 - SN3773; ConvF(6.96, 6.96, 6.96); Calibrated: 4/22/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 (A); Type: QDOVA001BB; Serial: 1213 Front/QPSK Ch 18900 RB 1/0/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.545 W/kg Front/QPSK Ch 18900 RB 1/0/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 18.85 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 0.701 W/kg SAR(1 g) = 0.469 W/kg; SAR(10 g) = 0.305 W/kg Maximum value of SAR (measured) = 0.568 W/kg 0 dB = 0.568 W/kg = -2.46 dBW/kg Plot No. 14

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date/Time: 1/15/2016 10:45:54 AM LTE Band 4 Frequency: 1732.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 1732.5 MHz; σ = 1.338 S/m; εr = 41.121; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1257; Calibrated: 9/16/2015 - Probe: EX3DV4 - SN3990; ConvF(8.7, 8.7, 8.7); Calibrated: 3/18/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM with CRP; Type: SAM; LHS/Touch_QPSK Ch 20175 RB 1/0/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.563 W/kg LHS/Touch_QPSK Ch 20175 RB 1/0/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 20.494 V/m; Power Drift = 0.08 dB Peak SAR (extrapolated) = 0.716 W/kg SAR(1 g) = 0.476 W/kg; SAR(10 g) = 0.309 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.570 W/kg 0 dB = 0.570 W/kg = -2.44 dBW/kg Plot No. 15

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date/Time: 1/14/2016 11:00:06 PM LTE Band 4 Frequency: 1732.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 1732.5 MHz; σ = 1.456 S/m; εr = 51.775; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1257; Calibrated: 9/16/2015 - Probe: EX3DV4 - SN3990; ConvF(8.08, 8.08, 8.08); Calibrated: 3/18/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI A v5.0; Type: QDOVA002AA; Serial: S/n:1198 Rear/QPSK Ch 20175 RB 1/0/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.702 W/kg Rear/QPSK Ch 20175 RB 1/0/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 22.730 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 0.912 W/kg SAR(1 g) = 0.623 W/kg; SAR(10 g) = 0.410 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.751 W/kg 0 dB = 0.751 W/kg = -1.24 dBW/kg Plot No. 16

Test Laboratory: UL Verification Services Inc., SAR Lab 1 Date/Time: 1/14/2016 9:15:44 PM LTE Band 5 Frequency: 836.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 836.5 MHz; σ = 0.926 S/m; εr = 41.92; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE3 Sn500; Calibrated: 5/22/2015 - Probe: EX3DV4 - SN7356; ConvF(9.96, 9.96, 9.96); Calibrated: 4/22/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM; Type: QD000P40CD; Serial: TP 1751 RHS/Touch_QPSK_ch 20525_RB 1/0/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.564 W/kg RHS/Touch_QPSK_ch 20525_RB 1/0/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 24.998 V/m; Power Drift = 0.17 dB Peak SAR (extrapolated) = 0.625 W/kg SAR(1 g) = 0.509 W/kg; SAR(10 g) = 0.388 W/kg Info: Interpolated medium parameters used for SAR evaluation. 0 dB = 0.564 W/kg = -2.49 dBW/kg Plot No. 17

Test Laboratory: UL Verification Services Inc., SAR Lab 1 Date/Time: 1/14/2016 11:19:16 PM LTE Band 5 Frequency: 836.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 836.5 MHz; σ = 1.018 S/m; εr = 53.997; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE3 Sn500; Calibrated: 5/22/2015 - Probe: EX3DV4 - SN7356; ConvF(9.97, 9.97, 9.97); Calibrated: 4/22/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI-A v5.0; Type: QDOVA002AA; Serial: TP 1194 Rear/QPSK_ch 20525_RB 1/0/Area Scan (8x14x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.557 W/kg Rear/QPSK_ch 20525_RB 1/0/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 23.783 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 0.643 W/kg SAR(1 g) = 0.499 W/kg; SAR(10 g) = 0.378 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.569 W/kg Rear/QPSK_ch 20525_RB 1/0/Zoom Scan 2 (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 23.783 V/m; Power Drift = 0.08 dB Peak SAR (extrapolated) = 0.340 W/kg SAR(1 g) = 0.207 W/kg; SAR(10 g) = 0.128 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.258 W/kg 0 dB = 0.258 W/kg = -5.88 dBW/kg Plot No. 18

Test Laboratory: UL Verification Services Inc., SAR Lab 4 Date/Time: 1/14/2016 7:19:13 PM LTE Band 17 Frequency: 710 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 710 MHz; σ = 0.86 S/m; εr = 39.967; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1258; Calibrated: 5/14/2015 - Probe: EX3DV4 - SN3989; ConvF(10.54, 10.54, 10.54); Calibrated: 3/17/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM with CRP; Type: SAM; RHS/Touch_QPSK RB 1/0_ch 23790/Area Scan (7x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.193 W/kg RHS/Touch_QPSK RB 1/0_ch 23790/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 15.02 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 0.208 W/kg SAR(1 g) = 0.175 W/kg; SAR(10 g) = 0.139 W/kg 0 dB = 0.193 W/kg = -7.14 dBW/kg Plot No. 19

Test Laboratory: UL Verification Services Inc., SAR Lab 4 Date/Time: 1/14/2016 4:59:25 PM LTE Band 17 Frequency: 710 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 710 MHz; σ = 0.944 S/m; εr = 53.666; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1258; Calibrated: 5/14/2015 - Probe: EX3DV4 - SN3989; ConvF(10.04, 10.04, 10.04); Calibrated: 3/17/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI-B V5.0; Type: QDOVA001BB; Serial: S/n:1216 Rear/QPSK RB 1/0_ch 23790/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.413 W/kg Rear/QPSK RB 1/0_ch 23790/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 21.03 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 0.436 W/kg SAR(1 g) = 0.358 W/kg; SAR(10 g) = 0.278 W/kg Maximum value of SAR (measured) = 0.396 W/kg 0 dB = 0.396 W/kg = -4.02 dBW/kg Plot No. 20

Test Laboratory: UL Verification Services Inc., SAR Lab 4 Date/Time: 1/14/2016 9:18:42 PM Wi-Fi 2.4GHz Frequency: 2412 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 2412 MHz; σ = 1.845 S/m; εr = 37.523; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1258; Calibrated: 5/14/2015 - Probe: EX3DV4 - SN3989; ConvF(7.67, 7.67, 7.67); Calibrated: 3/17/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM with CRP; Type: SAM; LHS/Tilt_802.11b_ch 1/Area Scan (9x16x1): Measurement grid: dx=12mm, dy=12mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.882 W/kg LHS/Tilt_802.11b_ch 1/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 21.44 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 1.42 W/kg SAR(1 g) = 0.575 W/kg; SAR(10 g) = 0.245 W/kg Info: Interpolated medium parameters used for SAR evaluation. 0 dB = 0.882 W/kg = -0.55 dBW/kg Plot No. 21

Test Laboratory: UL Verification Services Inc., SAR Lab 4 Date/Time: 1/12/2016 11:17:04 PM Wi-Fi 2.4GHz Frequency: 2412 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 2412 MHz; σ = 1.956 S/m; εr = 50.694; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1258; Calibrated: 5/14/2015 - Probe: EX3DV4 - SN3989; ConvF(7.52, 7.52, 7.52); Calibrated: 3/17/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI A (v5.0); Type: QDOVA001BB; Serial: S/n:1212 Rear/802.11b_ch 1 @ 15 mm/Area Scan (9x16x1): Measurement grid: dx=12mm, dy=12mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.142 W/kg Rear/802.11b_ch 1 @ 15 mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 8.143 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 0.188 W/kg SAR(1 g) = 0.095 W/kg; SAR(10 g) = 0.048 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.129 W/kg 0 dB = 0.129 W/kg = -8.89 dBW/kg Plot No. 22

Test Laboratory: UL Verification Services Inc., SAR Lab 4 Date/Time: 1/13/2016 12:09:56 AM Wi-Fi 2.4GHz Frequency: 2412 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 2412 MHz; σ = 1.956 S/m; εr = 50.694; ρ = 1000 kg/m3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1258; Calibrated: 5/14/2015 - Probe: EX3DV4 - SN3989; ConvF(7.52, 7.52, 7.52); Calibrated: 3/17/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI A (v5.0); Type: QDOVA001BB; Serial: S/n:1212 Rear/802.11b_ch 1 @ 10 mm/Area Scan (9x16x1): Measurement grid: dx=12mm, dy=12mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.292 W/kg Rear/802.11b_ch 1 @ 10 mm/Zoom Scan (9x8x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 10.70 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 0.473 W/kg SAR(1 g) = 0.226 W/kg; SAR(10 g) = 0.109 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.315 W/kg 0 dB = 0.315 W/kg = -5.02 dBW/kg Plot No. 23


Document Created: 2017-11-18 04:07:11
Document Modified: 2017-11-18 04:07:11
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC