RF Exposure Info 4

FCC ID: ZNFL423DL

RF Exposure Info

Download: PDF
FCCID_4147837

Figure D-1 Composition of 750 MHz Head and Body Tissue Equivalent Matter Note: 750MHz liquid recipes are proprietary SPEAG. Since the composition is approximate to the actual liquids utilized, the manufacturer tissue-equivalent liquid data sheets are provided below. Figure D-2 750MHz Body Tissue Equivalent Matter Approved by: FCC ID: ZNFL423DL SAR EVALUATION REPORT Quality Manager Test Dates: DUT Type: APPENDIX D: 12/03/18 - 12/26/18 Portable Handset Page 2 of 6 © 2019 PCTEST Engineering Laboratory, Inc. REV 21.2 M 12/05/2018

Figure D-3 750MHz Head Tissue Equivalent Matter Approved by: FCC ID: ZNFL423DL SAR EVALUATION REPORT Quality Manager Test Dates: DUT Type: APPENDIX D: 12/03/18 - 12/26/18 Portable Handset Page 3 of 6 © 2019 PCTEST Engineering Laboratory, Inc. REV 21.2 M 12/05/2018

Figure D-4 Composition of 2.4 GHz Head Tissue Equivalent Matter Note: 2.4 GHz head liquid recipes are proprietary SPEAG. Since the composition is approximate to the actual liquids utilized, the manufacturer tissue-equivalent liquid data sheets are provided below. Figure D-5 2.4 GHz Head Tissue Equivalent Matter Approved by: FCC ID: ZNFL423DL SAR EVALUATION REPORT Quality Manager Test Dates: DUT Type: APPENDIX D: 12/03/18 - 12/26/18 Portable Handset Page 4 of 6 © 2019 PCTEST Engineering Laboratory, Inc. REV 21.2 M 12/05/2018

Figure D-6 Composition of 5 GHz Head Tissue Equivalent Matter Note: 5 GHz head liquid recipes are proprietary SPEAG. Since the composition is approximate to the actual liquids utilized, the manufacturer tissue-equivalent liquid data sheets are provided below. Figure D-7 5 GHz Head Tissue Equivalent Matter Approved by: FCC ID: ZNFL423DL SAR EVALUATION REPORT Quality Manager Test Dates: DUT Type: APPENDIX D: 12/03/18 - 12/26/18 Portable Handset Page 5 of 6 © 2019 PCTEST Engineering Laboratory, Inc. REV 21.2 M 12/05/2018

Figure D-8 Composition of 5 GHz Body Tissue Equivalent Matter Note: 5 GHz Body liquid recipes are proprietary SPEAG. Since the composition is approximate to the actual liquids utilized, the manufacturer tissue-equivalent liquid data sheets are provided below. Figure D-9 5 GHz Body Tissue Equivalent Matter Approved by: FCC ID: ZNFL423DL SAR EVALUATION REPORT Quality Manager Test Dates: DUT Type: APPENDIX D: 12/03/18 - 12/26/18 Portable Handset Page 6 of 6 © 2019 PCTEST Engineering Laboratory, Inc. REV 21.2 M 12/05/2018

APPENDIX E: SAR SYSTEM VALIDATION Per FCC KDB Publication 865664 D02v01r02, SAR system validation status should be documented to confirm measurement accuracy. The SAR systems (including SAR probes, system components and software versions) used for this device were validated against its performance specifications prior to the SAR measurements. Reference dipoles were used with the required tissue- equivalent media for system validation, according to the procedures outlined in FCC KDB Publication 865664 D01v01r04 and IEEE 1528-2013. Since SAR probe calibrations are frequency dependent, each probe calibration point was validated at a frequency within the valid frequency range of the probe calibration point, using the system that normally operates with the probe for routine SAR measurements and according to the required tissue-equivalent media. A tabulated summary of the system validation status including the validation date(s), measurement frequencies, SAR probes and tissue dielectric parameters has been included. Table E-1 SAR System Validation Summary – 1g SAR COND. PERM. CW VALIDATION MOD. VALIDATION SYSTEM FREQ. [MHz] DATE PROBE SN PROBE CAL. POINT PROBE PROBE MOD. (σ) (εr) SENSITIVITY DUTY FACTOR PAR # LINEARITY ISOTROPY TYPE M 750 11/2/2018 3287 750 Head 0.908 42.190 PASS PASS PASS N/A N/A N/A G 835 8/9/2018 7410 835 Head 0.889 40.915 PASS PASS PASS GMSK PASS N/A M 1750 11/5/2018 3287 1750 Head 1.342 39.217 PASS PASS PASS N/A N/A N/A M 1900 11/5/2018 3287 1900 Head 1.430 39.014 PASS PASS PASS GMSK PASS N/A H 1900 7/16/2018 7409 1900 Head 1.425 40.935 PASS PASS PASS GMSK PASS N/A G 2450 8/7/2018 7410 2450 Head 1.865 39.618 PASS PASS PASS OFDM/TDD PASS PASS I 2450 12/24/2018 7406 2450 Head 1.797 38.399 PASS PASS PASS OFDM/TDD PASS PASS H 5250 7/5/2018 7409 5250 Head 4.492 34.994 PASS PASS PASS OFDM N/A PASS H 5600 7/5/2018 7409 5600 Head 4.839 34.496 PASS PASS PASS OFDM N/A PASS H 5750 7/5/2018 7409 5750 Head 4.995 34.288 PASS PASS PASS OFDM N/A PASS I 750 7/19/2018 7406 750 Body 0.969 53.451 PASS PASS PASS N/A N/A N/A L 750 11/6/2018 7308 750 Body 0.962 53.923 PASS PASS PASS N/A N/A N/A I 835 8/8/2018 7406 835 Body 0.980 53.497 PASS PASS PASS GMSK PASS N/A J 835 9/11/2018 3347 835 Body 0.984 54.197 PASS PASS PASS GMSK PASS N/A J 1750 9/5/2018 3347 1750 Body 1.454 53.515 PASS PASS PASS N/A N/A N/A D 1750 8/15/2018 7357 1750 Body 1.475 51.784 PASS PASS PASS N/A N/A N/A E 1900 12/3/2018 3332 1900 Body 1.518 51.796 PASS PASS PASS GMSK PASS N/A K 2450 4/3/2018 3319 2450 Body 2.043 51.130 PASS PASS PASS OFDM/TDD PASS PASS L 5250 10/29/2018 7308 5250 Body 5.511 48.770 PASS PASS PASS OFDM N/A PASS L 5600 10/29/2018 7308 5600 Body 5.994 48.200 PASS PASS PASS OFDM N/A PASS L 5750 10/29/2018 7308 5750 Body 6.219 47.960 PASS PASS PASS OFDM N/A PASS Table E-2 SAR System Validation Summary – 10g SAR COND. PERM. CW VALIDATION MOD. VALIDATION SYSTEM FREQ. [MHz] DATE PROBE SN PROBE CAL. POINT PROBE PROBE MOD. (σ) (εr) SENSITIVITY DUTY FACTOR PAR # LINEARITY ISOTROPY TYPE D 1750 8/15/2018 7357 1750 Body 1.475 51.784 PASS PASS PASS N/A N/A N/A E 1900 12/3/2018 3332 1900 Body 1.518 51.796 PASS PASS PASS GMSK PASS N/A L 5250 10/29/2018 7308 5250 Body 5.511 48.770 PASS PASS PASS OFDM N/A PASS L 5600 10/29/2018 7308 5600 Body 5.994 48.200 PASS PASS PASS OFDM N/A PASS L 5750 10/29/2018 7308 5750 Body 6.219 47.960 PASS PASS PASS OFDM N/A PASS NOTE: While the probes have been calibrated for both CW and modulated signals, all measurements were performed using communication systems calibrated for CW signals only. Modulations in the table above represent test configurations for which the measurement system has been validated per FCC KDB Publication 865664 D01v01r04 for scenarios when CW probe calibrations are used with other signal types. SAR systems were validated for modulated signals with a periodic duty cycle, such as GMSK, or with a high peak to average ratio (>5 dB), such as OFDM according to FCC KDB Publication 865664 D01v01r04. Approved by: FCC ID: ZNFL423DL SAR EVALUATION REPORT Quality Manager Test Dates: DUT Type: APPENDIX E: 12/03/18 - 12/26/18 Portable Handset Page 1 of 1 © 2019 PCTEST Engineering Laboratory, Inc. REV 21.2 M 12/05/2018

APPENDIX G POWER REDUCTION VERIFICATION Per the May 2017 TCBC Workshop Notes, demonstration of proper functioning of the power reduction mechanisms is required to support the corresponding SAR configurations. The verification process was divided into two parts: (1) evaluation of output power levels for individual or multiple triggering mechanisms and (2) evaluation of the triggering distances for proximity-based sensors. G.1 Power Verification Procedure The power verification was performed according to the following procedure: 1. A base station simulator was used to establish a conducted RF connection and the output power was monitored. The power measurements were confirmed to be within expected tolerances for all states before and after a power reduction mechanism was triggered. 2. Step 1 was repeated for all relevant modes and frequency bands for the mechanism being investigated. 3. Steps 1 and 2 were repeated for all individual power reduction mechanisms and combinations thereof. For the combination cases, one mechanism was switched to a 'triggered' state at a time; powers were confirmed to be within tolerances after each additional mechanism was activated. G.2 Distance Verification Procedure The distance verification procedure was performed according to the following procedure: 1. A base station simulator was used to establish an RF connection and to monitor the power levels. The device being tested was placed below the relevant section of the phantom with the relevant side or edge of the device facing toward the phantom. 2. The device was moved toward and away from the phantom to determine the distance at which the mechanism triggers and the output power is reduced, per KDB Publication 616217 D04v01r02 and FCC Guidance. Each applicable test position was evaluated. The distances were confirmed to be the same or larger (more conservative) than the minimum distances provided by the manufacturer. 3. Steps 1 and 2 were repeated for low, mid, and high bands, as appropriate (see note below Table G-2 for more details). 4. Steps 1 through 3 were repeated for all distance-based power reduction mechanisms. Reviewed by: FCC ID: ZNFL423DL SAR EVALUATION REPORT Quality Manager Test Dates: DUT Type: APPENDIX G: 12/03/2018 – 12/26/2018 Portable Handset Page 1 of 2 © 2019 PCTEST Engineering Laboratory, Inc. REV 20.05 M 11/15/2017

G.3 Main Antenna Verification Summary Table G-1 Power Measurement Verification for Main Antenna Conducted Power (dBm) Mechanism(s) Mode/Band Un-triggered Mechanism #1 (Max) (Reduced) Grip UMTS 1750 24.62 23.23 Grip UMTS 1900 24.28 23.04 Grip PCS CDMA 24.16 22.89 Grip LTE FDD Band 4 24.31 23.01 Grip LTE FDD Band 66 24.38 23.12 Grip LTE FDD Band 2 24.09 22.84 Table G-2 Distance Measurement Verification for Main Antenna Distance Measurements (mm) Minimum Distance per Mechanism(s) Test Condition Band Moving Toward Moving Away Manufacturer (mm) Grip Body - Back Side Mid 3 5 3 Grip Body - Front Side Mid 5 7 5 Grip Body - Bottom Edge Mid 5 7 5 *Note: Mid band refers to: PCS CDMA (BC1), UMTS B2/4, LTE B2/4/66 G.4 WIFI Verification Summary Table G-3 Power Measurement Verification WIFI Conducted Power (dBm) Mechanism(s) Mode/Band Un-triggered Mechanism #1 (Max) (Reduced) Held-to-Ear 802.11b 21.26 16.08 Held-to-Ear 802.11g 20.87 16.24 Held-to-Ear 802.11n (2.4GHz) 20.11 15.96 Held-to-Ear 802.11a 18.97 12.29 Held-to-Ear 802.11n (5GHz, 20MHz BW) 15.53 12.51 Held-to-Ear 802.11ac (20MHz BW) 15.29 12.62 Held-to-Ear 802.11n (5GHz, 40MHz BW) 14.48 12.28 Held-to-Ear 802.11ac (40MHz BW) 14.73 11.23 Reviewed by: FCC ID: ZNFL423DL SAR EVALUATION REPORT Quality Manager Test Dates: DUT Type: APPENDIX G: 12/03/2018 – 12/26/2018 Portable Handset Page 2 of 2 © 2019 PCTEST Engineering Laboratory, Inc. REV 20.05 M 11/15/2017

APPENDIX H: DOWNLINK LTE CA RF CONDUCTED POWERS 1.1 LTE Downlink Only Carrier Aggregation Test Selection and Setup SAR test exclusion for LTE downlink Carrier Aggregation is determined by power measurements according to the number component carriers (CCs) supported by the product implementation. For those configurations required by April 2018 TCBC Workshop Notes, conducted power measurements with LTE Carrier Aggregation (CA) (downlink only) active are made in accordance to KDB Publication 941225 D05Av01r02. The RRC connection is only handled by one cell, the primary component carrier (PCC) for downlink and uplink communications. After making a data connection to the PCC, the UE device adds secondary component carrier(s) (SCC) on the downlink only. All uplink communications and acknowledgements remain identical to specifications when downlink carrier aggregation is inactive on the PCC. Additional conducted output powers are measured with the downlink carrier aggregation active for the configuration with highest measured maximum conducted power with downlink carrier aggregation inactive measured among the channel bandwidth, modulation, and RB combinations in each frequency band. Per FCC KDB Publication 941225 D05Av01r02, no SAR measurements are required for carrier aggregation configurations when the maximum average output power with downlink only carrier aggregation active is not more than 0.25 dB higher than the average output power with downlink only carrier aggregation inactive. All bands required for SAR testing per FCC KDB procedures were considered. Based on the measured maximum powers below, no additional SAR tests were required for DLCA SAR configurations. General PCC and SCC configuration selection procedure - PCC uplink channel, channel bandwidth, modulation and RB configurations were selected based on section C)3)b)ii) of KBD 941225 D05 V01r02. The downlink PCC channel was paired with the selected PCC uplink channel according to normal configurations without carrier aggregation. - To maximize aggregated bandwidth, highest channel bandwidth available for that CA combination was selected for SCC. For inter-band CA, the SCC downlink channels were selected near the middle of their transmission bands. For contiguous intra-band CA, the downlink channel spacing between the component carriers was set to multiple of 300 kHz less than the nominal channel spacing defined in section 5.4.1A of 3GPP TS 36.521. For non-contiguous intra-band CA, the downlink channel spacing between the component carriers was set to be larger than the nominal channel spacing and provided maximum separation between the component carriers. - All selected PCC and SCC(s) remained fully within the uplink/downlink transmission band of the respective component carrier. Base Station Wireless Device Simulator Figure 1 DL CA Power Measurement Setup Reviewed by: FCC ID: ZNFL423DL SAR EVALUATION REPORT Quality Manager Test Dates: DUT Type: APPENDIX H: 12/03/18 – 12/26/18 Portable Handset Page 1 of 3 © 2019 PCTEST Engineering Laboratory, Inc. REV 20.05 M 11/15/2017

1.2 Downlink Carrier Aggregation RF Conducted Powers 1.2.1 LTE Band 71 as PCC Table 1 Maximum Output Powers PCC SCC Power LTE Single PCC (DL) SCC (DL) PCC BW PCC (UL) PCC (UL) PCC UL# PCC UL PCC (DL) SCC BW SCC (DL) LTE Tx.Power with DL CA Carrier Tx Combination PCC Band Modulation Freq. SCC Band Freq. [MHz] Channel Freq. [MHz] RB RB Offset Ch. [MHz] Ch. Enabled (dBm) Power [MHz] [MHz] (dBm) CA_2A-71A LTE B71 10 133297 680.5 QPSK 1 49 68761 634.5 LTE B2 20 900 1960 25.17 25.17 CA_4A-71A LTE B71 10 133297 680.5 QPSK 1 49 68761 634.5 LTE B4 20 2175 2132.5 25.13 25.17 CA_66A-71A LTE B71 10 133297 680.5 QPSK 1 49 68761 634.5 LTE B66 20 66786 2145 25.18 25.17 1.2.2 LTE Band 12 as PCC Table 2 Maximum Output Powers PCC SCC Power LTE Single PCC (DL) SCC (DL) PCC BW PCC (UL) PCC (UL) PCC UL# PCC UL PCC (DL) SCC BW SCC (DL) LTE Tx.Power with DL CA Carrier Tx Combination PCC Band Modulation Freq. SCC Band Freq. [MHz] Channel Freq. [MHz] RB RB Offset Ch. [MHz] Ch. Enabled (dBm) Power [MHz] [MHz] (dBm) CA_2A-12A LTE B12 3 23165 714.5 QPSK 1 0 5165 744.5 LTE B2 20 900 1960 25.18 25.14 CA_4A-12A LTE B12 3 23165 714.5 QPSK 1 0 5165 744.5 LTE B4 20 2175 2132.5 25.12 25.14 CA_12A-66A LTE B12 3 23165 714.5 QPSK 1 0 5165 744.5 LTE B66 20 66786 2145 25.08 25.14 1.2.3 LTE Band 5 as PCC Table 3 Maximum Output Powers PCC SCC Power LTE Single PCC (DL) SCC (DL) PCC BW PCC (UL) PCC (UL) PCC UL# PCC UL PCC (DL) SCC BW SCC (DL) LTE Tx.Power with DL CA Carrier Tx Combination PCC Band Modulation Freq. SCC Band Freq. [MHz] Channel Freq. [MHz] RB RB Offset Ch. [MHz] Ch. Enabled (dBm) Power [MHz] [MHz] (dBm) CA_2A-5A LTE B5 10 20525 836.5 QPSK 1 25 2525 881.5 LTE B2 20 900 1960 25.13 25.10 CA_4A-5A LTE B5 10 20525 836.5 QPSK 1 25 2525 881.5 LTE B4 20 2175 2132.5 25.06 25.10 1.2.4 LTE Band 4 as PCC Table 4 Maximum Output Powers PCC SCC Power LTE Single PCC (DL) SCC (DL) PCC BW PCC (UL) PCC (UL) PCC UL# PCC UL PCC (DL) SCC BW SCC (DL) LTE Tx.Power with DL CA Carrier Tx Combination PCC Band Modulation Freq. SCC Band Freq. [MHz] Channel Freq. [MHz] RB RB Offset Ch. [MHz] Ch. Enabled (dBm) Power [MHz] [MHz] (dBm) CA_4A-4A LTE B4 20 20050 1720 QPSK 1 50 2050 2120 LTE B4 20 2300 2145 24.67 24.70 CA_2A-4A LTE B4 20 20050 1720 QPSK 1 50 2050 2120 LTE B2 20 900 1960 24.66 24.70 CA_4A-5A LTE B4 20 20050 1720 QPSK 1 50 2050 2120 LTE B5 10 2525 881.5 24.63 24.70 CA_4A-12A LTE B4 20 20050 1720 QPSK 1 50 2050 2120 LTE B12 10 5095 737.5 24.67 24.70 CA_4A-71A LTE B4 20 20050 1720 QPSK 1 50 2050 2120 LTE B71 20 68761 634.5 24.68 24.70 Table 5 Reduced Output Powers PCC SCC Power LTE Single PCC (DL) SCC (DL) PCC BW PCC (UL) PCC (UL) PCC UL# PCC UL PCC (DL) SCC BW SCC (DL) LTE Tx.Power with DL CA Carrier Tx Combination PCC Band Modulation Freq. SCC Band Freq. [MHz] Channel Freq. [MHz] RB RB Offset Ch. [MHz] Ch. Enabled (dBm) Power [MHz] [MHz] (dBm) CA_4A-4A LTE B4 20 20050 1720 QPSK 50 25 2050 2120 LTE B4 20 2300 2145 23.48 23.50 CA_2A-4A LTE B4 20 20050 1720 QPSK 50 25 2050 2120 LTE B2 20 900 1960 23.42 23.50 CA_4A-5A LTE B4 20 20050 1720 QPSK 50 25 2050 2120 LTE B5 10 2525 881.5 23.45 23.50 CA_4A-12A LTE B4 20 20050 1720 QPSK 50 25 2050 2120 LTE B12 10 5095 737.5 23.46 23.50 CA_4A-71A LTE B4 20 20050 1720 QPSK 50 25 2050 2120 LTE B71 20 68761 634.5 23.45 23.50 Reviewed by: FCC ID: ZNFL423DL SAR EVALUATION REPORT Quality Manager Test Dates: DUT Type: APPENDIX H: 12/03/18 – 12/26/18 Portable Handset Page 2 of 3 © 2019 PCTEST Engineering Laboratory, Inc. REV 20.05 M 11/15/2017

1.2.5 LTE Band 66 as PCC Table 6 Maximum Output Powers PCC SCC Power LTE Single PCC (DL) SCC (DL) PCC BW PCC (UL) PCC (UL) PCC UL# PCC UL PCC (DL) SCC BW SCC (DL) LTE Tx.Power with DL CA Carrier Tx Combination PCC Band Modulation Freq. SCC Band Freq. [MHz] Channel Freq. [MHz] RB RB Offset Ch. [MHz] Ch. Enabled (dBm) Power [MHz] [MHz] (dBm) CA_66A-66A LTE B66 20 132072 1720 QPSK 1 50 66536 2120 LTE B66 20 67236 2190 24.61 24.70 CA_66B LTE B66 5 132647 1777.5 QPSK 1 0 67111 2177.5 LTE B66 15 67018 2168.2 24.67 24.70 CA_66C LTE B66 20 132072 1720 QPSK 1 50 66536 2120 LTE B66 20 66734 2139.8 24.69 24.70 CA_2A-66A LTE B66 20 132072 1720 QPSK 1 50 66536 2120 LTE B2 20 900 1960 24.69 24.70 CA_12A-66A LTE B66 20 132072 1720 QPSK 1 50 66536 2120 LTE B12 10 5095 737.5 24.49 24.70 CA_66A-71A LTE B66 20 132072 1720 QPSK 1 50 66536 2120 LTE B71 20 68761 634.5 24.60 24.70 Table 7 Reduced Output Powers PCC SCC Power LTE Single PCC (DL) SCC (DL) PCC BW PCC (UL) PCC (UL) PCC UL# PCC UL PCC (DL) SCC BW SCC (DL) LTE Tx.Power with DL CA Carrier Tx Combination PCC Band Modulation Freq. SCC Band Freq. [MHz] Channel Freq. [MHz] RB RB Offset Ch. [MHz] Ch. Enabled (dBm) Power [MHz] [MHz] (dBm) CA_66A-66A LTE B66 20 132072 1720 QPSK 50 25 66536 2120 LTE B66 20 67236 2190 23.44 23.50 CA_66B LTE B66 15 132047 1717.5 QPSK 1 36 66511 2117.5 LTE B66 5 66604 2126.8 23.49 23.50 CA_66C LTE B66 20 132072 1720 QPSK 50 25 66536 2120 LTE B66 20 66734 2139.8 23.44 23.50 CA_2A-66A LTE B66 20 132072 1720 QPSK 50 25 66536 2120 LTE B2 20 900 1960 23.38 23.50 CA_12A-66A LTE B66 20 132072 1720 QPSK 50 25 66536 2120 LTE B12 10 5095 737.5 23.40 23.50 CA_66A-71A LTE B66 20 132072 1720 QPSK 50 25 66536 2120 LTE B71 20 68761 634.5 23.47 23.50 1.2.6 LTE Band 2 as PCC Table 8 Maximum Output Powers PCC SCC Power LTE Single PCC (DL) SCC (DL) PCC BW PCC (UL) PCC (UL) PCC UL# PCC UL PCC (DL) SCC BW SCC (DL) LTE Tx.Power with DL CA Carrier Tx Combination PCC Band Modulation Freq. SCC Band Freq. [MHz] Channel Freq. [MHz] RB RB Offset Ch. [MHz] Ch. Enabled (dBm) Power [MHz] [MHz] (dBm) CA_2A-2A LTE B2 15 18900 1880 QPSK 1 0 900 1960 LTE B2 20 700 1940 24.38 24.35 CA_2A-4A LTE B2 15 18900 1880 QPSK 1 0 900 1960 LTE B4 20 2175 2132.5 24.40 24.35 CA_2A-5A LTE B2 15 18900 1880 QPSK 1 0 900 1960 LTE B5 10 2525 881.5 24.35 24.35 CA_2A-12A LTE B2 15 18900 1880 QPSK 1 0 900 1960 LTE B12 10 5095 737.5 24.31 24.35 CA_2A-66A LTE B2 15 18900 1880 QPSK 1 0 900 1960 LTE B66 20 66786 2145 24.30 24.35 CA_2A-71A LTE B2 15 18900 1880 QPSK 1 0 900 1960 LTE B71 20 68761 634.5 24.28 24.35 CA_2C LTE B2 15 18900 1880 QPSK 1 0 900 1960 LTE B2 20 729 1942.9 24.39 24.35 Table 9 Reduced Output Powers PCC SCC Power LTE Single PCC (DL) SCC (DL) PCC BW PCC (UL) PCC (UL) PCC UL# PCC UL PCC (DL) SCC BW SCC (DL) LTE Tx.Power with DL CA Carrier Tx Combination PCC Band Modulation Freq. SCC Band Freq. [MHz] Channel Freq. [MHz] RB RB Offset Ch. [MHz] Ch. Enabled (dBm) Power [MHz] [MHz] (dBm) CA_2A-2A LTE B2 20 18900 1880 QPSK 50 0 900 1960 LTE B2 20 700 1940 23.10 23.20 CA_2A-4A LTE B2 20 18900 1880 QPSK 50 0 900 1960 LTE B4 20 2175 2132.5 23.13 23.20 CA_2A-5A LTE B2 20 18900 1880 QPSK 50 0 900 1960 LTE B5 10 2525 881.5 23.20 23.20 CA_2A-12A LTE B2 20 18900 1880 QPSK 50 0 900 1960 LTE B12 10 5095 737.5 23.09 23.20 CA_2A-66A LTE B2 20 18900 1880 QPSK 50 0 900 1960 LTE B66 20 66786 2145 23.18 23.20 CA_2A-71A LTE B2 20 18900 1880 QPSK 50 0 900 1960 LTE B71 20 68761 634.5 23.13 23.20 CA_2C LTE B2 20 18900 1880 QPSK 50 0 900 1960 LTE B2 20 702 1940.2 23.18 23.20 Reviewed by: FCC ID: ZNFL423DL SAR EVALUATION REPORT Quality Manager Test Dates: DUT Type: APPENDIX H: 12/03/18 – 12/26/18 Portable Handset Page 3 of 3 © 2019 PCTEST Engineering Laboratory, Inc. REV 20.05 M 11/15/2017


Document Created: 2019-03-26 07:13:13
Document Modified: 2019-03-26 07:13:13
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC