HAC T-Coil_Appendix B

FCC ID: ZNFH740

Test Report

Download: PDF
FCCID_2722238

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 7/17/2015 GSM 850 Communication System: UID 0, GPRS-FDD (TDMA, GMSK, 1 slot) (0); Frequency: 836.6 MHz;Duty Cycle: 1:8.00018 T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 190/z (axial) wideband at best S/N/ABM Freq Resp(x,y,z,f) (1x1x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_300-3000_2s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 2000ms BWC applied: 10.80 dB Device Reference Point: 0, 0, -6.3 mm Telephone parameters WD signal quality Category [(signal+noise)-to-noise ratio in decibels] Category T1 0 dB to 10 dB Category T2 10 dB to 20 dB Category T3 20 dB to 30 dB Category T4 > 30 dB Cursor: Diff = 0.29 dB BWC Factor = 10.80 dB Location: 4.5, -17.3, 3.7 mm Plot No. 1

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 7/17/2015 GSM 850 Communication System: UID 0, GPRS-FDD (TDMA, GMSK, 1 slot) (0); Frequency: 836.6 MHz; Duty Cycle: 1:8.00018 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3083; ; Calibrated: 1/15/2015 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1259; Calibrated: 1/14/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 190/z (axial) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 40.13 dB ABM1 comp = 10.87 dBA/m BWC Factor = 0.16 dB Location: 4.6, -17.1, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 2

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 7/17/2015 GSM 850 Communication System: UID 0, GPRS-FDD (TDMA, GMSK, 1 slot) (0); Frequency: 836.6 MHz; Duty Cycle: 1:8.00018 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3083; ; Calibrated: 1/15/2015 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1259; Calibrated: 1/14/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 190/y (transversal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 37.35 dB ABM1 comp = -7.32 dBA/m BWC Factor = 0.16 dB Location: -7.9, -4.2, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 3

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 7/17/2015 GSM 1900 Communication System: UID 0, GPRS-FDD (TDMA, GMSK, 1 slot) (0); Frequency: 1880 MHz;Duty Cycle: 1:8.00018 T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 661/z (axial) wideband at best S/N/ABM Freq Resp(x,y,z,f) (1x1x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_300-3000_2s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 2000ms BWC applied: 10.80 dB Device Reference Point: 0, 0, -6.3 mm Telephone parameters WD signal quality Category [(signal+noise)-to-noise ratio in decibels] Category T1 0 dB to 10 dB Category T2 10 dB to 20 dB Category T3 20 dB to 30 dB Category T4 > 30 dB Cursor: Diff = 1.31 dB BWC Factor = 10.80 dB Location: 0, 360, 13 mm Plot No. 4

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 7/17/2015 GSM 1900 Communication System: UID 0, GPRS-FDD (TDMA, GMSK, 1 slot) (0); Frequency: 1880 MHz; Duty Cycle: 1:8.00018 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3083; ; Calibrated: 1/15/2015 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1259; Calibrated: 1/14/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 661/z (axial) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 47.46 dB ABM1 comp = 11.01 dBA/m BWC Factor = 0.16 dB Location: 5, -16.7, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 5

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 7/17/2015 GSM 1900 Communication System: UID 0, GPRS-FDD (TDMA, GMSK, 1 slot) (0); Frequency: 1880 MHz; Duty Cycle: 1:8.00018 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3083; ; Calibrated: 1/15/2015 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1259; Calibrated: 1/14/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 661/y (transversal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 43.64 dB ABM1 comp = -2.17 dBA/m BWC Factor = 0.16 dB Location: -3.7, -7.1, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 6

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 7/18/2015 W-CDMA Band V Communication System: UID 0, UMTS-FDD (WCDMA) (0); Frequency: 836.6 MHz;Duty Cycle: 1:1 T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 4183/z (axial) wideband at best S/N/ABM Freq Resp(x,y,z,f) (1x1x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_300-3000_2s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 2000ms BWC applied: 10.80 dB Device Reference Point: 0, 0, -6.3 mm Telephone parameters WD signal quality Category [(signal+noise)-to-noise ratio in decibels] Category T1 0 dB to 10 dB Category T2 10 dB to 20 dB Category T3 20 dB to 30 dB Category T4 > 30 dB Cursor: Diff = 1.22 dB BWC Factor = 10.80 dB Location: 0, 360, 13 mm Plot No. 7

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 7/17/2015 W-CDMA Band V Communication System: UID 0, UMTS-FDD (WCDMA) (0); Frequency: 836.6 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3083; ; Calibrated: 1/15/2015 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1259; Calibrated: 1/14/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 4183/z (axial) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 54.05 dB ABM1 comp = 9.45 dBA/m BWC Factor = 0.16 dB Location: 1.7, -17.1, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 8

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 7/17/2015 W-CDMA Band V Communication System: UID 0, UMTS-FDD (WCDMA) (0); Frequency: 836.6 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3083; ; Calibrated: 1/15/2015 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1259; Calibrated: 1/14/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 4183/y (transversal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 48.43 dB ABM1 comp = 1.29 dBA/m BWC Factor = 0.16 dB Location: 0, -7.9, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 9

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 7/18/2015 W-CDMA Band II Communication System: UID 0, UMTS-FDD (WCDMA) (0); Frequency: 1880 MHz;Duty Cycle: 1:1 T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 9400/z (axial) wideband at best S/N/ABM Freq Resp(x,y,z,f) (1x1x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_300-3000_2s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 2000ms BWC applied: 10.80 dB Device Reference Point: 0, 0, -6.3 mm Telephone parameters WD signal quality Category [(signal+noise)-to-noise ratio in decibels] Category T1 0 dB to 10 dB Category T2 10 dB to 20 dB Category T3 20 dB to 30 dB Category T4 > 30 dB Cursor: Diff = 1.62 dB BWC Factor = 10.80 dB Location: 0, 360, 13 mm Plot No. 10

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 7/18/2015 W-CDMA Band II Communication System: UID 0, UMTS-FDD (WCDMA) (0); Frequency: 1880 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3083; ; Calibrated: 1/15/2015 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1259; Calibrated: 1/14/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 9400/z (axial) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 45.77 dB ABM1 comp = 1.77 dBA/m BWC Factor = 0.16 dB Location: 2.1, -17.1, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 11

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 7/18/2015 W-CDMA Band II Communication System: UID 0, UMTS-FDD (WCDMA) (0); Frequency: 1880 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3083; ; Calibrated: 1/15/2015 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1259; Calibrated: 1/14/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 9400/y (transversal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 40.13 dB ABM1 comp = -6.41 dBA/m BWC Factor = 0.16 dB Location: 0.8, -8.3, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 12


Document Created: 2015-07-23 17:32:47
Document Modified: 2015-07-23 17:32:47
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC