MPE

FCC ID: ZMOM910GL

RF Exposure Info

Download: PDF
FCCID_3959239

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Report No.: SZEM180400321703 Fax: +86 (0) 755 2671 0594 Page: 1 of 8 Email: ee.shenzhen@sgs.com RF Exposure Evaluation Report Application No.: SZEM1804003217RG Applicant: Fibocom Wireless Inc. Address of Applicant 5/F, Tower A, Technology Building II, 1057 Nanhai Avenue, Shenzhen, China Manufacturer: Fibocom Wireless Inc. Address of Manufacturer 5/F, Tower A, Technology Building II, 1057 Nanhai Avenue, Shenzhen, China Factory: Shenzhen Eternity Technology Co., Ltd 1F, 2F, 4F Building A2, Yingzhan Industrial Zone, Longtian Community, Address of Factory: Longtian Road, Pingshan District, Shenzhen, Guangdong Province, P.R. China Product Name: LTE (CatM1,NB-IOT) Module Model No.(EUT): M910-GL Trade Mark: Fibocom FCC ID: ZMOM910GL Standards: 47 CFR Part 2 47 CFR Part 22 subpart H 47 CFR Part 24 subpart E 47 CFR Part 27 subpart C 47 CFR Part 90 subpart S Date of Receipt: 2018-06-21 Date of Test: 2018-06-25 to 2018-08-05 Date of Issue: 2018-08-08 Test Result: PASS* * In the configuration tested, the EUT complied with the standards specified above. Authorized Signature: Derek Yang Wireless Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321703 Page: 2 of 8 1 Version Revision Record Version Chapter Date Modifier Remark 01 2018-08-08 Original Authorized for issue by: 2018-08-08 Mike Hu /Project Engineer 2018-08-08 David Chen /Reviewer This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321703 Page: 3 of 8 Contents 1 VERSION ......................................................................................................................................................................2 CONTENTS ............................................................................................................................................................................3 2 GENERAL INFORMATION ........................................................................................................................................4 2.1 CLIENT INFORMATION ...........................................................................................................................................4 2.2 GENERAL DESCRIPTION OF EUT .........................................................................................................................4 2.3 TEST MODE ...........................................................................................................................................................4 2.4 TEST LOCATION ....................................................................................................................................................5 2.5 TEST FACILITY ......................................................................................................................................................5 2.6 DEVIATION FROM STANDARDS .............................................................................................................................5 2.7 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................................5 2.8 OTHER INFORMATION REQUESTED BY THE CUSTOMER ......................................................................................5 3 RF EXPOSURE EVALUATION .................................................................................................................................6 3.1 RF EXPOSURE COMPLIANCE REQUIREMENT ......................................................................................................6 3.1.1 Limits ...............................................................................................................................................................6 3.1.2 Test Procedure ...............................................................................................................................................6 3.1.3 EUT RF Exposure Evaluation ......................................................................................................................7 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321703 Page: 4 of 8 2 General Information 2.1 Client Information Applicant: Fibocom Wireless Inc. Address of Applicant: 5/F, Tower A, Technology Building II, 1057 Nanhai Avenue, Shenzhen, China Manufacturer: Fibocom Wireless Inc. Address of Manufacturer: 5/F, Tower A, Technology Building II, 1057 Nanhai Avenue, Shenzhen, China Factory: Shenzhen Eternity Technology Co., Ltd Address of Factory: 1F, 2F, 4F Building A2, Yingzhan Industrial Zone, Longtian Community, Longtian Road, Pingshan District, Shenzhen, Guangdong Province, P.R. China 2.2 General Description of EUT Product Name: LTE (CatM1,NB-IOT) Module Model No.: M910-GL Trade Mark: Fibocom Sample Type: LTE (CatM1,NB-IOT) Module Antenna Type: PIFA 2.3 Test Mode Test Mode Test Modes Description GSM/TM1 GSM system, GPRS, GMSK modulation GSM/TM2 GSM system, EGPRS, 8PSK modulation LTE-M1 LTE-NB1 LTE/TM1 LTE system, QPSK modulation LTE system, BPSK modulation LTE/TM2 LTE system, 16QAM modulation LTE system, QPSK modulation NOTE: The test mode(s) are selected according to relevant radio technology specifications. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321703 Page: 5 of 8 2.4 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 No tests were sub-contracted. 2.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • CNAS (No. CNAS L2929) CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G- 20026, R-14188, C-12383 and T-11153 respectively. • FCC –Designation Number: CN1178 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1178. Test Firm Registration Number: 406779. • Industry Canada (IC) Two 3m Semi-anechoic chambers and the 10m Semi-anechoic chamber of SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab have been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 4620C-1, 4620C-2, 4620C-3. 2.6 Deviation from Standards None. 2.7 Abnormalities from Standard Conditions None. 2.8 Other Information Requested by the Customer None. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321703 Page: 6 of 8 3 RF Exposure Evaluation 3.1 RF Exposure Compliance Requirement 3.1.1 Limits Frequency range Electric field strength Magnetic field strength Power density Averaging time (MHz) (V/m) (A/m) (mW/cm2) (minutes) (A) Limits for Occupational/Controlled Exposures 0.3-3.0 614 1.63 *(100) 6 3.0-30 1842/f 4.89/f *(900/f2) 6 30-300 61.4 0.163 1.0 6 300-1500 / / f/300 6 1500-100,000 / / 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *(100) 30 1.34-30 824/f 2.19/f *(180/f2) 30 30-300 27.5 0.073 0.2 30 300-1500 / / f/1500 30 1500-100,000 / / 1.0 30 F=frequency in MHz *=Plane-wave equivalent power density RF exposure compliance will need to be determined with respect to 1.1307(c) and (d) of the FCC rules. The emissions should be within the limits at 300kHz in Table 1 of 1.1310(use the 300kHz limits for 150kHz:614V/m,1.63A/m). Friis Formula Friis transmission formula: Pd = (Pout*G)/(4* Pi * R 2) Where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. 3.1.2 Test Procedure Software provided by client enabled the EUT to transmit data at lowest, middle and highest channel individually. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321703 Page: 7 of 8 3.1.3 EUT RF Exposure Evaluation Antenna Gain: The maximum Gain measured in fully anechoic chamber is 2.0 / 2.0 in linear scale. Output Power Into Antenna & RF Exposure Evaluation Distance: Max Conducted Operating Frequency EIRP(ERP) Limit Gain according to Average Band (MHz) (dBm) EIRP (dBi) Output Power (dBm) GSM850 824.2 32.5 38.45 8.1 GSM1900 1850.2 30 33 3 LTE-M1 BAND 2 1850.1 24 33 9 LTE-M1 BAND 4 1710.1 24 30 6 LTE-M1 BAND 12 699.1 24 34.77 12.92 LTE-M1 BAND 13 777.1 24 34.77 12.92 LTE-M1 BAND 26(814-824) 814.1 24 50 28.15 LTE-M1 BAND 26(824-849) 824.1 24 38.45 16.6 LTE-NB1 BAND 2 1850.7 23.5 33 9.5 LTE-NB1 BAND 4 1710.7 23.5 30 6.5 LTE-NB1 BAND 12 699.7 23.5 34.77 13.42 LTE-NB1 BAND 13 779.5 23.5 34.77 13.42 LTE-NB1 BAND 26(814-824) 814.7 23.5 50 28.65 LTE-NB1 BAND 26(824-849) 824.7 23.5 38.45 17.1 Max Antenna Conducted Output Power Limit Operating Frequency Average Power Density Max Gain (mW/cm2 Result Band (MHz) Output to Antenna at R = 20 cm Gain （dBi） ) Power (mW) (mW/cm2) (dBm) GSM850 824.2 -1.4 32.5 785.2356 0.1132 0.5495 5.46 PASS GSM1900 1850.2 1.1 30 1288.2496 0.3302 1.0000 5.91 PASS LTE-M1 BAND 2 1850.1 1.1 24 323.5937 0.0829 1.0000 11.91 PASS LTE-M1 BAND 4 1710.1 1.6 24 363.0781 0.1044 1.0000 11.41 PASS LTE-M1 BAND 12 699.1 -0.6 24 133.3521 0.0231 0.4661 12.44 PASS LTE-M1 BAND 13 777.1 -0.8 24 127.3503 0.0211 0.5181 13.1 PASS LTE-M1 BAND 26 814.1 -1.4 24 110.9175 0.0160 0.5427 13.9 PASS (814-824) LTE-M1 BAND 26 824.1 -1.4 24 110.9175 0.0160 0.5494 13.96 PASS (824-849) LTE-NB1 BAND 2 1850.7 1.1 23.5 288.4032 0.0739 1.0000 12.41 PASS LTE-NB1 BAND 4 1710.7 1.6 23.5 323.5937 0.0931 1.0000 11.91 PASS This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180400321703 Page: 8 of 8 LTE-NB1 BAND 12 699.7 -0.6 23.5 118.8502 0.0206 0.4665 12.95 PASS LTE-NB1 BAND 13 779.5 -0.8 23.5 113.5011 0.0188 0.5197 13.61 PASS LTE-NB1 BAND 26 814.7 -1.4 23.5 98.8553 0.0142 0.5431 14.41 PASS (814-824) LTE-NB1 BAND 26 824.7 -1.4 23.5 98.8553 0.0142 0.5498 14.46 PASS (824-849) The Max allowed antenna gain is as following table showed: Operating Band Antenna Gain（dBi） GSM850 5.46 GSM1900 3 LTE-M1 BAND 2 9 LTE-M1 BAND 4 6 LTE-M1 BAND 12 12.44 LTE-M1 BAND 13 12.92 LTE-M1 BAND 26(814-824) 13.9 LTE-M1 BAND 26(824-849) 13.96 LTE-NB1 BAND 2 9.5 LTE-NB1 BAND 4 6.5 LTE-NB1 BAND 12 12.95 LTE-NB1 BAND 13 13.42 LTE-NB1 BAND 26(814-824) 14.41 LTE-NB1 BAND 26(824-849) 14.46 Note: Refer to report No. SZEM180400321702 for EUT test Max Conducted Peak Output Power value. The distancer (6th column) calculated from the Fries transmission formula is far greater than 20 cm separation requirement. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.


Document Created: 2018-08-09 10:04:25
Document Modified: 2018-08-09 10:04:25
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC