MPE Report

FCC ID: ZMOL860GL

RF Exposure Info

Download: PDF
FCCID_3993110

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Report No.: SZEM180500437005 Fax: +86 (0) 755 2671 0594 Page: 1 of 8 Email: ee.shenzhen@sgs.com RF Exposure Evaluation Report Application No.: SZEM1805004370RG Applicant: Fibocom Wireless Inc. Address of Applicant 5/F, Tower A, Technology Building II, 1057 Nanhai Avenue, Shenzhen, China Manufacturer: Fibocom Wireless Inc. Address of Manufacturer 5/F, Tower A, Technology Building II, 1057 Nanhai Avenue, Shenzhen, China Factory: DongGuan Huabel Electronic Technology Co.,Ltd Address of Factory: No.9,Industrial Northern Road,National High Tech Industrial Development Zone, SongShan Lake DongGuan city, GuangDong provice P.R.China Product Name: LTE Module Model No.(EUT): L860-GL Trade Mark: Fibocom FCC ID: ZMOL860GL Standards: 47 CFR Part 2 47 CFR Part 22 subpart H 47 CFR Part 24 subpart E 47 CFR Part 27 subpart C 47 CFR Part 90 subpart R 47 CFR Part 90 subpart S Date of Receipt: 2018-06-12 Date of Test: 2018-06-15 to 2018-09-03 Date of Issue: 2018-09-03 Test Result: PASS* * In the configuration tested, the EUT complied with the standards specified above. Authorized Signature: Derek Yang Wireless Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180500437005 Page: 2 of 8 1 Version Revision Record Version Chapter Date Modifier Remark 01 2018-09-03 Original Authorized for issue by: 2018-09-03 Mike Hu /Project Engineer 2018-09-03 David Chen /Reviewer This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180500437005 Page: 3 of 8 Contents 1 VERSION ......................................................................................................................................................................2 CONTENTS ............................................................................................................................................................................3 2 GENERAL INFORMATION ........................................................................................................................................4 2.1 CLIENT INFORMATION ...........................................................................................................................................4 2.2 GENERAL DESCRIPTION OF EUT .........................................................................................................................4 2.3 TEST MODE ...........................................................................................................................................................5 2.4 TEST LOCATION ....................................................................................................................................................5 2.5 TEST FACILITY ......................................................................................................................................................5 2.6 DEVIATION FROM STANDARDS .............................................................................................................................5 2.7 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................................6 2.8 OTHER INFORMATION REQUESTED BY THE CUSTOMER ......................................................................................6 3 RF EXPOSURE EVALUATION .................................................................................................................................7 3.1 RF EXPOSURE COMPLIANCE REQUIREMENT ......................................................................................................7 3.1.1 Limits ...............................................................................................................................................................7 3.1.2 Test Procedure ...............................................................................................................................................7 3.1.3 EUT RF Exposure Evaluation ......................................................................................................................8 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180500437005 Page: 4 of 8 2 General Information 2.1 Client Information Applicant: Fibocom Wireless Inc. Address of Applicant: 5/F, Tower A, Technology Building II, 1057 Nanhai Avenue, Shenzhen, China Manufacturer: Fibocom Wireless Inc. Address of Manufacturer: 5/F, Tower A, Technology Building II, 1057 Nanhai Avenue, Shenzhen, China Factory: DongGuan Huabel Electronic Technology Co.,Ltd Address of Factory: No.9,Industrial Northern Road,National High Tech Industrial Development Zone, SongShan Lake DongGuan city, GuangDong provice P.R.China 2.2 General Description of EUT Product Name: LTE Module Model No.: L860-GL Trade Mark: Fibocom Hardware Version V1.2 Software Version 18600.5003.00.17.00.02 Sample Type: LTE Module Antenna Type: Dipole WCDMA BAND II: 4dBi; WCDMA BAND IV: 4dBi; WCDMA BAND V: 3dBi; LTE BAND 2: 4dBi; LTE BAND 4: 4dBi; LTE BAND 5:3dBi; LTE BAND 7: 4dBi; LTE BAND 12: 3dBi; Antenna Gain: LTE BAND 13: 2dBi; LTE BAND 14: 2dBi; LTE BAND17: 3dBi; LTE BAND 25: 4dBi; LTE BAND 26: 3dBi; LTE BAND 30: 1dBi; LTE BAND 38: 4dBi; LTE BAND 41: 3dBi; LTE BAND 66: 4dBi; This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180500437005 Page: 5 of 8 2.3 Test Mode Test Mode Test Modes Description UMTS/TM1 UMTS system, WCDMA, QPSK modulation UMTS/TM2 UMTS system, WCDMA, 16QAM modulation LTE/TM1 LTE system, QPSK modulation LTE/TM2 LTE system, 16QAM modulation LTE/TM3 LTE system, 64QAM modulation NOTE: The test mode(s) are selected according to relevant radio technology specifications. 2.4 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 No tests were sub-contracted. 2.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • CNAS (No. CNAS L2929) CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G- 20026, R-14188, C-12383 and T-11153 respectively. • FCC –Designation Number: CN1178 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1178. Test Firm Registration Number: 406779. • Industry Canada (IC) Two 3m Semi-anechoic chambers and the 10m Semi-anechoic chamber of SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab have been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 4620C-1, 4620C-2, 4620C-3. 2.6 Deviation from Standards None. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180500437005 Page: 6 of 8 2.7 Abnormalities from Standard Conditions None. 2.8 Other Information Requested by the Customer None. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180500437005 Page: 7 of 8 3 RF Exposure Evaluation 3.1 RF Exposure Compliance Requirement 3.1.1 Limits Frequency range Electric field strength Magnetic field strength Power density Averaging time (MHz) (V/m) (A/m) (mW/cm2) (minutes) (A) Limits for Occupational/Controlled Exposures 0.3-3.0 614 1.63 *(100) 6 3.0-30 1842/f 4.89/f *(900/f2) 6 30-300 61.4 0.163 1.0 6 300-1500 / / f/300 6 1500-100,000 / / 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *(100) 30 1.34-30 824/f 2.19/f *(180/f2) 30 30-300 27.5 0.073 0.2 30 300-1500 / / f/1500 30 1500-100,000 / / 1.0 30 F=frequency in MHz *=Plane-wave equivalent power density RF exposure compliance will need to be determined with respect to 1.1307(c) and (d) of the FCC rules. The emissions should be within the limits at 300kHz in Table 1 of 1.1310(use the 300kHz limits for 150kHz:614V/m,1.63A/m). Friis Formula Friis transmission formula: Pd = (Pout*G)/(4* Pi * R 2) Where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. 3.1.2 Test Procedure Software provided by client enabled the EUT to transmit data at lowest, middle and highest channel individually. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180500437005 Page: 8 of 8 3.1.3 EUT RF Exposure Evaluation Antenna Gain: The maximum Gain measured in fully anechoic chamber is 2.0 / 2.0 in linear scale. Output Power Into Antenna & RF Exposure Evaluation Distance: Max Output Power Conducted Output Gain Frequen Power EIRP(ERP) Density Gain Max Gain Operating Gain Average Power Limit according cy to Limit at R = 20 according Allowed conclusion Band (dBi) Output to Antenna (W/m2) to EIRP (MHz) Antenna (dBm) cm to Pd (dBi) (dBi) Power (mw) (dBi) (dBm) (mW/cm2) (dBm) WCDMA B2 1852.4 4.00 24.50 28.50 33.00 281.8383 0.1408 1.0000 8.50 12.51 8.50 Pass WCDMA B4 1712.4 4.00 24.50 28.50 30.00 281.8383 0.1408 1.0000 5.50 12.51 5.50 Pass WCDMA B5 826.4 3.00 24.50 25.35 38.45 281.8383 0.1119 0.5509 16.10 9.92 9.92 Pass LTE B2 1850.7 4.00 24.00 28.00 33.00 251.1886 0.1255 1.0000 9.00 13.01 9.00 Pass LTE B4 1710.7 4.00 24.00 28.00 30.00 251.1886 0.1255 1.0000 6.00 13.01 6.00 Pass LTE B5 824.7 3.00 25.00 25.85 38.45 316.2278 0.1255 0.5498 15.60 9.41 9.41 Pass LTE B7 2502.5 4.00 24.00 28.00 33.00 251.1886 0.1255 1.0000 9.00 13.01 9.00 Pass LTE B12 699.7 3.00 24.00 24.85 34.77 251.1886 0.0997 0.4665 12.92 9.70 9.70 Pass LTE B13 779.5 2.00 24.00 23.85 34.77 251.1886 0.0792 0.5197 12.92 10.16 10.16 Pass LTE B14 790.5 2.00 24.00 23.85 34.77 251.1886 0.0792 0.5270 12.92 10.23 10.23 Pass LTE B17 706.5 3.00 24.00 24.85 34.77 251.1886 0.0997 0.4710 12.92 9.74 9.74 Pass LTE B25 1850.7 4.00 24.00 28.00 33.00 251.1886 0.1255 1.0000 9.00 13.01 9.00 Pass LTE B26(814-824) 814.7 3.00 25.00 25.85 50.00 316.2278 0.1255 0.5431 27.15 9.36 9.36 Pass LTE B26(824-849) 824.7 3.00 25.00 25.85 38.45 316.2278 0.1255 0.5498 15.60 9.41 9.41 Pass LTE B30 2307.5 1.00 23.00 24.00 24.00 199.5262 0.0500 1.0000 1.00 14.01 1.00 Pass LTE B38 2572.5 4.00 24.00 28.00 33.00 251.1886 0.1255 1.0000 9.00 13.01 9.00 Pass LTE B41 2498.5 4.00 27.50 31.50 33.00 562.3413 0.2810 1.0000 5.50 9.51 5.50 Pass LTE B66 1710.7 4.00 24.00 28.00 30.00 251.1886 0.1255 1.0000 6.00 13.01 6.00 Pass Note: Refer to report No. SZEM180500437001 for EUT test Max Conducted Output Power value. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.


Document Created: 2018-09-04 15:45:38
Document Modified: 2018-09-04 15:45:38
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC