Modular Approval Request

FCC ID: ZMOL850GLL

Cover Letter(s)

Download: PDF
FCCID_4149695

RF_734_02 04 April 16 Modular Approval Request FCC (KDB 996369 D01 & Part 15.212) FCC ID: ZMOL850GLL Items to be covered by Single modular transmitters. Answer from applicant 1. The modular transmitter must have its own RF shielding. The radio portion of this module has been shielded, please see exhibition external photos. 2. The modular transmitter must have buffered modulation/data inputs (if such inputs Buffered data inputs stage has are provided) to ensure that the module will comply with Part 15 requirements been integrated in chip under conditions of excessive data rates or over-modulation. PMB5750+PMB9943 3. The modular transmitter must have its own power supply regulation. The part number of the power regulator is PMB6826A. Please see the schem.pdf 4. The modular transmitter must comply with the antenna requirements of Section The requirements of antenna 15.203 and 15.204(b)(c). The antenna must either be permanently attached or connector and spurious employ a “unique” antenna coupler (at all connections between the module and the emission have been fulfilled, antenna, including the cable). please refer to the Test Report exhibition. 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the Please refer to the Setup Photo module must not be inside another device during testing. This is intended to exhibition for the stand-alone demonstrate that the module is capable of complying with Part 15 emission limits test configuration. regardless of the device into which it is eventually installed. 6. The modular transmitter must be equipped with either a permanently affixed label The LTE Module will be or must be capable of electronically displaying its FCC identification number in labeled with its own FCC ID, accordance with 15.212 (a)(1)(vi)(A) / (B). and the instruction on the labeling rule of the end product has been stated in the User Manual of this module. Please refer to the Label and User Manual exhibition. 7. The modular transmitter must comply with any specific rule or operating The required FCC rule has requirements applicable to the transmitter and the manufacturer must provide been fulfilled and all the adequate instructions along with the module to explain any such requirements. A instructions for maintaining copy of these instructions must be included in the application for equipment compliance have been clearly authorization. For example, there are very strict operational and timing stated in the User Manual. requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. 8. The modular transmitter must comply with any applicable RF exposure Please refer exhibition RF requirements. For example, FCC Rules in Sections 1.1310, 2.1091, 2.1093, and Exposure for the compliance specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and of MPE RF exposure rule. 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance. Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance.

RF_734_02 04 April 16 ___________________________________ XueShan Huang / Certification Engineer Fibocom Wireless Inc. Tel.: +86-755-26525092 E-mail: keith.huang@fibocom.com


Document Created: 2019-01-24 14:11:30
Document Modified: 2019-01-24 14:11:30
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC