RF Test Report-27-3

FCC ID: ZMOL850GL

Test Report

Download: PDF
FCCID_3924833

Partial FCC Test Report (PART 27) Report No.: RF170822C16D-3 FCC ID: ZMOL850GL Test Model: L850-GL Received Date: Apr. 18, 2018 Test Date: May 27, 2018 Issued Date: Jun. 27, 2018 Applicant: Fibocom Wireless Inc. Address: 5/F, Tower A, Technology Building II, 1057#Nanhai Blvd, Shenzhen 518067, China Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) Test Location: No. 19, Hwa Ya 2nd Rd, Wen Hwa Vil, Kwei Shan Dist., Taoyuan City 33383, Taiwan (R.O.C) FCC Registration / 788550 / TW0003 Designation Number: This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies Report No.: RF170822C16D-3 Page No. 1 / 24 Report Format Version: 6.1.1 Reference No.: 180418C11

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ........................................................................................................................... 4 2 Summary of Test Results ........................................................................................................................... 5 2.1 Measurement Uncertainty ..................................................................................................................... 5 2.2 Test Site And Instruments ..................................................................................................................... 6 3 General Information ................................................................................................................................... 7 3.1 General Description of EUT .................................................................................................................. 7 3.2 Configuration of System Under Test ..................................................................................................... 8 3.2.1 Description of Support Units ....................................................................................................... 8 3.3 Test Mode Applicability and Tested Channel Detail .............................................................................. 9 3.4 EUT Operating Conditions .................................................................................................................... 9 3.5 General Description of Applied Standards ............................................................................................ 9 4 Test Types and Results ............................................................................................................................ 10 4.1 Output Power Measurement ............................................................................................................... 10 4.1.1 Limits of Output Power Measurement ...................................................................................... 10 4.1.2 Test Procedures ........................................................................................................................ 10 4.1.3 Test Setup .................................................................................................................................. 11 4.1.4 Test Results .............................................................................................................................. 12 4.2 Radiated Emission Measurement ....................................................................................................... 13 4.2.1 Limits of Radiated Emission Measurement .............................................................................. 13 4.2.2 Test Procedure ......................................................................................................................... 13 4.2.3 Deviation from Test Standard ................................................................................................... 13 4.2.4 Test Setup ................................................................................................................................. 14 4.2.5 Test Results .............................................................................................................................. 15 5 Pictures of Test Arrangements................................................................................................................ 23 Appendix – Information on the Testing Laboratories ................................................................................ 24 Report No.: RF170822C16D-3 Page No. 2 / 24 Report Format Version: 6.1.1 Reference No.: 180418C11

Release Control Record Issue No. Description Date Issued RF170822C16D-3 Original Release Jun. 27, 2018 Report No.: RF170822C16D-3 Page No. 3 / 24 Report Format Version: 6.1.1 Reference No.: 180418C11

1 Certificate of Conformity Product: LTE module Brand: Fibocom Test Model: L850-GL Sample Status: Production Unit Applicant: Fibocom Wireless Inc. Test Date: May 27, 2018 Standards: FCC Part 27, Subpart C, D The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: Jun. 27, 2018 Rona Chen / Specialist Approved by : , Date: Jun. 27, 2018 Dylan Chiou / Project Engineer Report No.: RF170822C16D-3 Page No. 4 / 24 Report Format Version: 6.1.1 Reference No.: 180418C11

ooocc 2 Summary of Test Results Applied Standard: FCC Part 27 & Part 2 FCC Clause Test Item Result Remarks 2.1046 Equivalent Isotropic Radiated . m 27.50(a)(3) Power Pass Meet the requirement of limit. 2.1055 in 27.54 Frequency Stability N/A Refer to Note 2.1049 Occupied Bandwidth N/A Refer to Note 21051 Band Edge Measurements N/A Refer to Note 27.53(a)(4) 21051 Conducted Spurious Emissions N/A Refer to Note 27.53(a)(4) 21053 Meet the requirement of limit. o7 é3(a)(4) Radiated Spurious Emissions Pass Minimum passing margin is —4.10 dB " at 39.45 MHz. Note: This report is a partial report. Therefore, only test item of Equivalent Isotropic Radiated Power and Radiated Spurious Emissions tests were performed for this report. Other testing data please refer to BV CPS report no.: RF1 70106C02—5 for module (Brand: Fibocom, Model: L850—GL) 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16—4—2: m A F Expended Uncertainty easuremen requenc quency (k=2) (+) Conducted Emissions at mains ports 150 kHz ~ 30 MHz 244 dB 30 MHz ~ 200 MHz 2.93 dB Radiated Emissions up to 1 GHz 200 MHz ~ 1000 MHz 2.95 dB 1 GHz ~ 18 GHz 2.26 dB Radiated Emissions above 1 GHz 18 GHz ~ 40 GHz 1.94 dB Report No.: RF170822C16D—3 Page No. 5 / 24 Report Format Version: 6.1.1 Reference No.: 180418011

2.2 Test Site And Instruments Description & Due Date of Model No. Serial No. Date of Calibration Manufacturer Calibration Test Receiver N9038A MY51210203 Mar. 16, 2018 Mar. 15, 2019 Agilent Spectrum Analyzer N9010A MY52220314 Nov. 24, 2017 Nov. 23, 2018 Agilent Spectrum Analyzer FSU43 101261 Jan. 11, 2018 Jan. 10, 2019 ROHDE & SCHWARZ Double Ridge Guide Horn 3115 5619 Nov. 30, 2017 Nov. 29, 2018 Antenna EMCO BILOG Antenna VULB 9168 9168-153 Dec. 06, 2017 Dec. 05, 2018 SCHWARZBECK Fixed Attenuator BW-N10W5+ NA Jul. 07, 2017 Jul. 06, 2018 Mini-Circuits MXG Vector signal generator N5182B MY53050430 Oct. 24, 2017 Oct. 23, 2018 Agilent Preamplifier EMC 012645 980115 Oct. 20, 2017 Oct. 19, 2018 EMCI Preamplifier EMC 184045 980116 Oct. 20, 2017 Oct. 19, 2018 EMCI Preamplifier EMC 330H 980112 Oct. 13, 2017 Oct. 12, 2018 EMCI RF Coaxial Cable EMC104-SM-SM-80 140811+170717 Oct. 20, 2017 Oct. 19, 2018 HUBER+SUHNNER 00&3000 RF Coaxial Cable EMC104-SM-SM- SUCOFLEX 104 Oct. 20, 2017 Oct. 19, 2018 HUBER+SUHNNER 1000(140807) RF Coaxial Cable 8D-FB Cable-Ch10-01 Oct. 20, 2017 Oct. 19, 2018 Worken Software E3 NA NA NA BV ADT 6.120103 Antenna Tower MFA-440H NA NA NA MF Turn Table MFT-201SS NA NA NA MF Antenna Tower &Turn Table Controller MF-7802 NA NA NA MF Radio Communication Analyzer MT8820C 6201010284 Dec. 28, 2017 Dec. 27, 2018 Anritsu Temperature & Humidity GTH-120-40-CP-AR MAA1306-019 Sep. 08, 2017 Sep. 07, 2018 Chamber DC Power Supply 33010D 807748 Oct. 25, 2016 Oct. 24, 2018 Topward Digital Multimeter 87-III 70360742 Jun. 30, 2017 Jun. 29, 2018 Fluke HORN Antenna BBHA 9120D 9120D-969 Dec. 12, 2017 Dec. 11, 2018 Schwarzbeck Note: 1. The calibration interval of the above test instruments is 12 / 24 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Chamber 10. 3. The horn antenna and preamplifier (model: EMC 184045) are used only for the measurement of emission frequency above 1 GHz if tested. 4. The IC Site Registration No. is IC7450F-10. Report No.: RF170822C16D-3 Page No. 6 / 24 Report Format Version: 6.1.1 Reference No.: 180418C11

3 General Information 3.1 General Description of EUT Product LTE module Brand Fibocom Test Model L850-GL Status of EUT Production Unit Power Supply Rating 5.0 Vdc (Host equipment) Modulation Type QPSK, 16QAM LTE Band 30 (Channel Bandwidth: 5 MHz) 2307.5 ~ 2312.5 MHz Frequency Range LTE Band 30 (Channel Bandwidth: 10 MHz) 2310 MHz LTE Band 30 (Channel Bandwidth: 5 MHz) 87.30 mW Max. EIRP Power LTE Band 30 (Channel Bandwidth: 10 MHz) 90.78 mW Antenna Type Refer to Note as below Accessory Device Refer to Note as below Data Cable Supplied Refer to Note as below Note: 1. The EUT is authorized for use in specific End-product. Please refer to below table for more details. Product Brand Model Convertible PC Lenovo TP00078C 2. The End-product contains following accessory devices. Product Brand Model Description I/P: 100-240 Vac, 50-60 Hz, 1.5 A Adapter Lenovo ADLX65NDC3A O/P: 20 Vdc, 3.25 A Battery Lenovo SB10K97589 15.2 Vdc, 3260 mAh 3. The information of antenna of End-product is listed as below. Antenna Type Manufacturer Part No. Antenna Gain (dBi) HUA CHENG Main Antenna: DC33001WM60 PIFA 1.35 TECHNOLOGY Co., Ltd Aux. Antenna: DC33001WM10 (Rx only) 4. The above EUT information is declared by manufacturer and for more detailed features description, please refers to the manufacturer's specifications or user's manual. Report No.: RF170822C16D-3 Page No. 7 / 24 Report Format Version: 6.1.1 Reference No.: 180418C11

3.2 Configuration of System Under Test <Radiated Emission Test> EUT (Powered from AC Adapter) Test table Universal Radio Communication Tester *Kept in a remote area <E.I.R.P. Test> EUT (Powered from battery) Test table Universal Radio Communication Tester *Kept in a remote area 3.2.1 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. No. Product Brand Model No. Serial No. FCC ID Communications 1. Agilent 8960 Series 10 MY53201073 N/A Tester-Wireless No. Signal Cable Description Of The Above Support Units 1. N/A Note: 1. All power cords of the above support units are non-shielded (1.8m). 2. Items 1 acted as communication partners to transfer data. Report No.: RF170822C16D-3 Page No. 8 / 24 Report Format Version: 6.1.1 Reference No.: 180418C11

3.3 Test Mode Applicability and Tested Channel Detail Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates, XYZ axis & NB Mode, and antenna ports The worst case was found when positioned on NB Mode for EIRP and radiated emission. Following channel(s) was (were) selected for the final test as listed below: EUT Available Channel Configure Test Item Tested Channel Modulation Mode Channel Bandwidth Mode 27685 to 27735 27685, 27710, 27735 5 MHz QPSK, 16QAM 1 RB / 24 RB Offset - EIRP 27710 27710 10 MHz QPSK, 16QAM 1 RB / 49 RB Offset Radiated 27685 to 27735 27685, 27710, 27735 5 MHz QPSK 1 RB / 24 RB Offset - Emission 27710 27710 10 MHz QPSK 1 RB / 49 RB Offset Note: This device was tested under all bandwidths, RB configurations and modulations. The worst case was found in QPSK modulation. Test Condition: Test Item Environmental Conditions Input Power Tested By EIRP 25 deg. C, 65 % RH 5 Vdc Getaz Yang Radiated Emission 25 deg. C, 65 % RH 120 Vac, 60 Hz Jisysong Wang 3.4 EUT Operating Conditions The EUT makes a call to the communication simulator. The communication simulator station system controlled a EUT to export maximum output power under transmission mode and specific channel frequency 3.5 General Description of Applied Standards The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC 47 CFR Part 2 FCC 47 CFR Part 27 KDB 971168 D01 Power Meas License Digital Systems v03r01 ANSI/TIA/EIA-603-E 2016 ANSI 63.26-2015 NOTE: All test items have been performed and recorded as per the above standards. Report No.: RF170822C16D-3 Page No. 9 / 24 Report Format Version: 6.1.1 Reference No.: 180418C11

4 Test Types and Results 4.1 Output Power Measurement 4.1.1 Limits of Output Power Measurement Mobile and portable stations. (i) For mobile and portable stations transmitting in the 2305-2315 MHz band or the 2350-2360 MHz band, the average EIRP must not exceed 50 milliwatts within any 1 megahertz of authorized bandwidth, except that for mobile and portable stations compliant with 3GPP LTE standards or another advanced mobile broadband protocol that avoids concentrating energy at the edge of the operating band the average EIRP must not exceed 250 milliwatts within any 5 megahertz of authorized bandwidth but may exceed 50 milliwatts within any 1 megahertz of authorized bandwidth. For mobile and portable stations using time division duplexing (TDD) technology, the duty cycle must not exceed 38 percent in the 2305-2315 MHz and 2350-2360 MHz bands. Mobile and portable stations using FDD technology are restricted to transmitting in the 2305-2315 MHz band. Power averaging shall not include intervals in which the transmitter is off. 4.1.2 Test Procedures EIRP Measurement: a. All measurements were done at low, middle and high operational frequency range. RBW is 5 MHz and VBW is 15 MHz for LTE mode. b. Substitution method is used for E.I.R.P measurement. In the semi-anechoic chamber, EUT placed on the 0.8 m (below or equal 1 GHz) and/or 1.5 m (above 1 GHz) height of Turn Table, rotated the table around 360 degrees to search the maximum radiation power and receiver antenna shall be rotated vertical and horizontal polarization and moved height from 1 m to 4 m to find the maximum polar radiated power. The “Read Value” is the spectrum reading the maximum power value. c. The substitution horn antenna is substituted for EUT at the same position and signals generator export the CW signal to the substitution antenna via a tx cable. Rotated the Turn Table and moved receiving antenna to find the maximum radiation power. Adjust output power level of S.G to get a Value of spectrum reading equal to “Read Value” of step b. Record the power level of S.G. d. EIRP = Output power level of S.G – TX cable loss + Antenna gain of substitution horn. Conducted Power Measurement: a. The EUT was set up for the maximum power with LTE link data modulation and link up with simulator. b. Set the EUT to transmit under low, middle and high channel and record the power level shown on simulator. Report No.: RF170822C16D-3 Page No. 10 / 24 Report Format Version: 6.1.1 Reference No.: 180418C11

4.1.3 Test Setup EIRP / ERP Measurement: <Radiated Emission below or equal 1 GHz> Ant. Tower 1-4m Variable 3 m 10m EUT& Support Units Turn Table 80cm Ground Plane Test Receiver <Radiated Emission above 1 GHz> Ant. Tower 1-4 m Variable EUT& 3m Support Units Turn Table Absorber 150 cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). Conducted Power Measurement: Communication Simulator EUT Report No.: RF170822C16D-3 Page No. 11 / 24 Report Format Version: 6.1.1 Reference No.: 180418C11

4.1.4 Test Results EIRP Power (dBm) LTE Band 30 Channel Bandwidth: 5 MHz / QPSK Frequency LVL Correction Polarization Plane Channel EIRP (dBm) EIRP (mW) (MHz) (dBm) Factor (dB) (H/V) 27685 2307.5 -19.70 38.99 19.29 84.92 27710 2310.0 -18.76 38.17 19.41 87.30 H NB 27735 2312.5 -19.34 38.55 19.21 83.37 Mode 27685 2307.5 -22.23 39.27 17.04 50.58 27710 2310.0 -21.44 38.68 17.24 52.97 V 27735 2312.5 -21.60 38.55 16.95 49.55 Channel Bandwidth: 5 MHz / 16QAM 27685 2307.5 -20.76 38.99 18.23 66.53 27710 2310.0 -19.75 38.17 18.42 69.50 H NB 27735 2312.5 -20.36 38.55 18.19 65.92 Mode 27685 2307.5 -23.22 39.27 16.05 40.27 27710 2310.0 -22.64 38.68 16.04 40.18 V 27735 2312.5 -22.56 38.55 15.99 39.72 LTE Band 30 Channel Bandwidth: 10 MHz / QPSK Frequency LVL Correction Polarization Plane Channel EIRP (dBm) EIRP (mW) (MHz) (dBm) Factor (dB) (H/V) NB 27710 2310.0 -18.59 38.17 19.58 90.78 H Mode 27710 2310.0 -21.37 38.68 17.31 53.83 V Channel Bandwidth: 10 MHz / 16QAM NB 27710 2310.0 -19.64 38.17 18.53 71.29 H Mode 27710 2310.0 -22.38 38.68 16.30 42.66 V Report No.: RF170822C16D-3 Page No. 12 / 24 Report Format Version: 6.1.1 Reference No.: 180418C11

4.2 Radiated Emission Measurement 4.2.1 Limits of Radiated Emission Measurement The power of any emission outside a licensee's frequency block shall be attenuated below the transmitter power (P) by at least 70 +10 log10(P) dB. The limit of emission is equal to -40 dBm. 4.2.2 Test Procedure a. Substitution method is used for E.I.R.P measurement. In the semi-anechoic chamber, EUT placed on the 0.8 m (below or equal 1 GHz) and/or 1.5 m (above 1 GHz) height of Turn Table, rotated the table around 360 degrees to search the maximum radiation power and receiver antenna shall be rotated vertical and horizontal polarization and moved height from 1 m to 4 m to find the maximum polar radiated power. The “Read Value” is the spectrum reading the maximum power value. b. The substitution horn antenna is substituted for EUT at the same position and signals generator export the CW signal to the substitution antenna via a TX cable. Rotated the Turn Table and moved receiving antenna to find the maximum radiation power. Adjust output power level of S.G to get a Value of spectrum reading equal to “Read Value “ of step a. Record the power level of S.G c. EIRP = Output power level of S.G – TX cable loss + Antenna gain of substitution horn. d. E.R.P power can be calculated form E.I.R.P power by subtracting the gain of dipole, E.R.P power = E.I.P.R power - 2.15 dB. Note: The resolution bandwidth of spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz. 4.2.3 Deviation from Test Standard No deviation. Report No.: RF170822C16D-3 Page No. 13 / 24 Report Format Version: 6.1.1 Reference No.: 180418C11

4.2.4 Test Setup <Radiated Emission below or equal 1 GHz> Ant. Tower 1-4m Variable 3 m 10m EUT& Support Units Turn Table 80cm Ground Plane Test Receiver <Radiated Emission above 1 GHz> Ant. Tower 1-4 m Variable EUT& 3m Support Units Turn Table Absorber 150 cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). Report No.: RF170822C16D-3 Page No. 14 / 24 Report Format Version: 6.1.1 Reference No.: 180418C11

4.2.5 Test Results LTE Band 30 Channel Bandwidth: 5 MHz / QPSK Low Channel Report No.: RF170822C16D-3 Page No. 15 / 24 Report Format Version: 6.1.1 Reference No.: 180418C11

suneaAu venirks Bureau Veritas Consumer Products Services Ltd.,Taoyuan Branch Data: 4 eLevel (dBm) Date: 2018—05—27 —10.0 —20.0 —30.0 40.0 PART27_(B30) —50.0 —60.0 + —70.0 B 1000 4000. 6000. 8000. 10000. 12000. 14000. 16000. 18000. 20000. 22000. 24000 Frequency (MHz) Site : 966 Chamber 5 Condition: PART27_(B3@) VERTICAL Remak : LTE Band 30 QPSK_SM_L—CH Link Tested by: Jisyong Wang Read Limit Over Freq Level Level Line Limit Factor Remark MHz dBm dBm dBm dB dB 1 pp 4615.00 —60.32 —56.67 —40.00 —20.32 —3.65 Peak

suneaAu venirks Bureau Veritas Consumer Products Services Ltd.,Taoyuan Branch Data: 3 eLevel (dBm) Date: 2018—05—27 —10.0 —20.0 —30.0 40.0 PART27_(B30) —50.0 —60.0 f —70.0 B 1000 4000. 6000. 8000. 10000. 12000. 14000. 16000. 18000. 20000. 22000. 24000 Frequency (MHz) Site : 966 Chamber 5 Condition: PART27_(B3@) HORIZONTAL Remak : LTE Band 30 QPSK_SM_M—CH Link Tested by: Jisyong Wang Read Limit Over Freq Level Level Line Limit Factor Remark MHz dBm dBm dBm dB dB 1 pp 4620.00 —60.45 —56.77 —40.00 —20.45 —3.68 Peak

suneaAu venirks Bureau Veritas Consumer Products Services Ltd.,Taoyuan Branch Data: 4 eLevel (dBm) Date: 2018—05—27 —10.0 —20.0 —30.0 40.0 PART27_(B30) —50.0 —60.0 3 —70.0 B 1000 4000. 6000. 8000. 10000. 12000. 14000. 16000. 18000. 20000. 22000. 24000 Frequency (MHz) Site : 966 Chamber 5 Condition: PART27_(B3@) VERTICAL Remak : LTE Band 30 QPSK_SM_M—CH Link Tested by: Jisyong Wang Read Limit Over Freq Level Level Line Limit Factor Remark MHz dBm dBm dBm dB dB 1 pp 4620.00 —60.04 —56.36 —40.00 —20.04 —3.68 Peak

suneaAu venirks Bureau Veritas Consumer Products Services Ltd.,Taoyuan Branch Data: 3 eLevel (dBm) Date: 2018—05—27 —10.0 —20.0 —30.0 40.0 PART27_(B30) —50.0 —60.0 3 —70.0 B 1000 4000. 6000. 8000. 10000. 12000. 14000. 16000. 18000. 20000. 22000. 24000 Frequency (MHz) Site : 966 Chamber 5 Condition: PART27_(B3@) HORIZONTAL Remak : LTE Band 30 QPSK_SM_H—CH Link Tested by: Jisyong Wang Read Limit Over Freq Level Level Line Limit Factor Remark MHz dBm dBm dBm dB dB 1 pp 4625.00 —59.87 —56.19 —40.00 —19.87 —3.68 Peak

suneaAu venirks Bureau Veritas Consumer Products Services Ltd.,Taoyuan Branch Data: 4 eLevel (dBm) Date: 2018—05—27 —10.0 —20.0 —30.0 40.0 PART27_(B30) —50.0 —60.0 j —70.0 B 1000 4000. 6000. 8000. 10000. 12000. 14000. 16000. 18000. 20000. 22000. 24000 Frequency (MHz) Site : 966 Chamber 5 Condition: PART27_(B3@) VERTICAL Remak : LTE Band 30 QPSK_SM_H—CH Link Tested by: Jisyong Wang Read Limit Over Freq Level Level Line Limit Factor Remark MHz dBm dBm dBm dB dB 1 pp 4625.00 —60.26 —56.58 —40.00 —20.26 —3.68 Peak

Channel Bandwidth: 10 MHz / QPSK Middle Channel Report No.: RF170822C16D-3 Page No. 21 / 24 Report Format Version: 6.1.1 Reference No.: 180418C11

suneaAu Bureau Veritas Consumer Products Services Ltd.,Taoyuan Branch Data: 8 eLe\rel (dBm) Date: 2018—05—27 —10.0 —20.0 —30.0 PART27_(830) —40.0 8 —50.0 —60.0 4 —70.0 8 30 3000. 5000. 7000. 9000. 11000. 13000. 15000. 17000. 19000. 21000. 24000 Frequency (MHz) Site : 966 Chamber 5 Condition: PART27_(B3@) VERTICAL Remak LTE Band 30 QPSK_10M_M—CH Link Tested by: Jisyong Wang Read Limit Over Freq Level Level Line Limit Factor Remark MHz dBm dBm dBm dB dB 1 pp 39.45 —44.10 —44.74 —40.00 —4.10 0.64 Peak 2 69.42 —50.93 —42.53 —40.00 —10.93 —8.40 Peak 3 99.39 —56.40 —45.84 —40.00 —16.40 —10.56 Peak 4 214.68 —53.81 —46.37 —40.00 —13.81 —7.44 Peak 5 265.98 —56.94 —50.63 —40.00 —16.94 —6.31 Peak 6 437.20 —54.34 —48.69 —40.00 —14.34 —5.65 Peak 7 4620.00 —60.40 —56.72 —40.00 —20.40 —3.68 Peak 8 6930.00 —48.98 —51.67 —40.00 —8.98 2.69 Peak

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF170822C16D-3 Page No. 23 / 24 Report Format Version: 6.1.1 Reference No.: 180418C11

Appendix – Information on the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are FCC recognized accredited test firms and accredited according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF170822C16D-3 Page No. 24 / 24 Report Format Version: 6.1.1 Reference No.: 180418C11


Document Created: 2018-07-13 14:48:44
Document Modified: 2018-07-13 14:48:44
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC