SAR Report -Appendix A&B

FCC ID: ZMOL850GL

RF Exposure Info

Download: PDF
FCCID_3924819

FCC SAR Test Report Appendix A. SAR Plots of System Verification The plots for system verification with largest deviation for each SAR system combination are shown as follows. Report Format Version 5.0.0 Issued Date : Jun. 29, 2018 Report No. : SA170822C16D Reference No. : 180418C11

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/06/07 System Check_B750_180607 DUT: Dipole 750 MHz; Type: D750V3; SN: 1013 Communication System: CW; Frequency: 750 MHz;Duty Cycle: 1:1 Medium: B06T09N1_0607 Medium parameters used: f = 750 MHz; σ = 0.975 S/m; εr = 55.099; ρ = 1000 kg/m3 Ambient Temperature：23.6 ℃ ; Liquid Temperature：23.2 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3820; ConvF(9.47, 9.47, 9.47); Calibrated: 2017/06/27; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn917; Calibrated: 2017/12/14 - Phantom: ELI Phantom_1039; Type: QDOVA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) Pin=250mW/Area Scan (61x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.78 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 53.53 V/m; Power Drift = -0.15 dB Peak SAR (extrapolated) = 3.25 W/kg SAR(1 g) = 2.22 W/kg; SAR(10 g) = 1.48 W/kg Maximum value of SAR (measured) = 2.79 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/06/12 System Check_B835_180612 DUT: Dipole 835 MHz; Type: D835V2; SN: 4d121 Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium: B07T10N1_0612 Medium parameters used: f = 835 MHz; σ = 1.014 S/m; εr = 54.848; ρ = 1000 kg/m3 Ambient Temperature：23.7 ℃ ; Liquid Temperature：23.5 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3650; ConvF(9.76, 9.76, 9.76); Calibrated: 2017/07/24; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2018/01/18 - Phantom: ELI Phantom_1206; Type: QDOVA; - Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7373) Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 3.06 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 57.35 V/m; Power Drift = -0.06 dB Peak SAR (extrapolated) = 3.44 W/kg SAR(1 g) = 2.3 W/kg; SAR(10 g) = 1.51 W/kg Maximum value of SAR (measured) = 3.07 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/06/06 System Check_B1750_180606 DUT: Dipole 1750 MHz; Type: D1750V2; SN: 1055 Communication System: CW; Frequency: 1750 MHz;Duty Cycle: 1:1 Medium: B16T20N1_0606 Medium parameters used: f = 1750 MHz; σ = 1.437 S/m; εr = 52.601; ρ = 1000 kg/m3 Ambient Temperature：23.6 ℃ ; Liquid Temperature：23.3 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3820; ConvF(7.77, 7.77, 7.77); Calibrated: 2017/06/27 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn917; Calibrated: 2017/12/14 - Phantom: ELI Phantom_1039; Type: QDOVA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 13.5 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 100.5 V/m; Power Drift = -0.09 dB Peak SAR (extrapolated) = 15.7 W/kg SAR(1 g) = 8.86 W/kg; SAR(10 g) = 4.74 W/kg Maximum value of SAR (measured) = 13.4 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/06/06 System Check_B1900_180606 DUT: Dipole 1900 MHz; Type: D1900V2; SN: 5d036 Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium: B16T20N1_0606 Medium parameters used: f = 1900 MHz; σ = 1.581 S/m; εr = 52.161; ρ = 1000 kg/m3 Ambient Temperature：23.6 ℃ ; Liquid Temperature：23.3 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3820; ConvF(7.62, 7.62, 7.62); Calibrated: 2017/06/27 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn917; Calibrated: 2017/12/14 - Phantom: ELI Phantom_1039; Type: QDOVA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 14.2 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 95.68 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 17.5 W/kg SAR(1 g) = 9.86 W/kg; SAR(10 g) = 5.2 W/kg Maximum value of SAR (measured) = 14.0 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/06/07 System Check_B2300_180607 DUT: Dipole 2300 MHz; Type: D2300V2; SN:1004 Communication System: CW; Frequency: 2300 MHz;Duty Cycle: 1:1 Medium: B19T27N1_0607 Medium parameters used: f = 2300 MHz; σ = 1.835 S/m; εr = 51.657; ρ = 1000 kg/m3 Ambient Temperature：23.6 ℃ ; Liquid Temperature：23.2 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3971; ConvF(7.75, 7.75, 7.75); Calibrated: 2018/03/26 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1431; Calibrated: 2018/03/16 - Phantom: ELI Phantom_1039; Type: QDOVA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) Pin=250mW/Area Scan (81x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 19.0 W/kg Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 104.9 V/m; Power Drift = -0.13 dB Peak SAR (extrapolated) = 22.8 W/kg SAR(1 g) = 11.7 W/kg; SAR(10 g) = 5.65 W/kg Maximum value of SAR (measured) = 18.9 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/06/18 System Check_B2450_180618 DUT: Dipole 2450 MHz; Type: D2450V2; SN: 737 Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: B19T27N5_0618 Medium parameters used: f = 2450 MHz; σ = 2.044 S/m; εr = 50.51; ρ = 1000 kg/m3 Ambient Temperature：23.6 ℃ ; Liquid Temperature：23.3 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3650; ConvF(7.68, 7.68, 7.68); Calibrated: 2017/07/24 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2018/01/18 - Phantom: ELI Phantom_1206; Type: QDOVA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) Pin=250mW/Area Scan (81x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 19.7 W/kg Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 91.13 V/m; Power Drift = -0.14 dB Peak SAR (extrapolated) = 25.1 W/kg SAR(1 g) = 12.1 W/kg; SAR(10 g) = 5.6 W/kg Maximum value of SAR (measured) = 20.4 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/06/07 System Check_B2600_180607 DUT: Dipole 2600 MHz; Type: D2600V2; SN: 1020 Communication System: CW; Frequency: 2600 MHz;Duty Cycle: 1:1 Medium: B19T27N1_0607 Medium parameters used: f = 2600 MHz; σ = 2.168 S/m; εr = 50.887; ρ = 1000 kg/m3 Ambient Temperature：23.6 ℃ ; Liquid Temperature：23.2 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3820; ConvF(6.86, 6.86, 6.86); Calibrated: 2017/06/27; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn917; Calibrated: 2017/12/14 - Phantom: ELI Phantom_1039; Type: QDOVA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) Pin=250mW/Area Scan (81x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 23.7 W/kg Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 109.2 V/m; Power Drift = -0.12 dB Peak SAR (extrapolated) = 29.2 W/kg SAR(1 g) = 13.8 W/kg; SAR(10 g) = 6.14 W/kg Maximum value of SAR (measured) = 23.5 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/06/12 System Check_B5250_180612 DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1019 Communication System: CW; Frequency: 5250 MHz;Duty Cycle: 1:1 Medium: B34T60N1_0612 Medium parameters used: f = 5250 MHz; σ = 5.49 S/m; εr = 47.641; ρ = 1000 kg/m3 Ambient Temperature：23.7 ℃ ; Liquid Temperature：23.5 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3650; ConvF(5.28, 5.28, 5.28); Calibrated: 2017/07/24; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2018/01/18 - Phantom: ELI Phantom_1206; Type: QDOVA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 18.1 W/kg Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 57.34 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 34.0 W/kg SAR(1 g) = 7.9 W/kg; SAR(10 g) = 2.24 W/kg Maximum value of SAR (measured) = 19.9 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/06/13 System Check_B5600_180613 DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1019 Communication System: CW; Frequency: 5600 MHz;Duty Cycle: 1:1 Medium: B34T60N1_0613 Medium parameters used: f = 5600 MHz; σ = 5.94 S/m; εr = 47.006; ρ = 1000 kg/m3 Ambient Temperature：23.9 ℃ ; Liquid Temperature：23.2 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3650; ConvF(4.29, 4.29, 4.29); Calibrated: 2017/07/24 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2018/01/18 - Phantom: ELI Phantom_1206; Type: QDOVA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 18.4 W/kg Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 58.26 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 31.9 W/kg SAR(1 g) = 7.66 W/kg; SAR(10 g) = 2.17 W/kg Maximum value of SAR (measured) = 19.4 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/06/13 System Check_B5800_180613 DUT: Dipole 5 GHz; Type: D5GHzV2; SN: 1019 Communication System: CW; Frequency: 5800 MHz;Duty Cycle: 1:1 Medium: B34T60N1_0613 Medium parameters used: f = 5800 MHz; σ = 6.231 S/m; εr = 46.62; ρ = 1000 kg/m3 Ambient Temperature：23.9 ℃ ; Liquid Temperature：23.2 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3650; ConvF(4.61, 4.61, 4.61); Calibrated: 2017/07/24 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2018/01/18 - Phantom: ELI Phantom_1206; Type: QDOVA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 15.8 W/kg Pin=100mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 57.38 V/m; Power Drift = -0.17 dB Peak SAR (extrapolated) = 33.4 W/kg SAR(1 g) = 7.94 W/kg; SAR(10 g) = 2.24 W/kg Maximum value of SAR (measured) = 16.9 W/kg

FCC SAR Test Report Appendix B. SAR Plots of SAR Measurement The SAR plots for highest measured SAR in each exposure configuration, wireless mode and frequency band combination, and measured SAR > 1.5 W/kg are shown as follows. Report Format Version 5.0.0 Issued Date : Jun. 29, 2018 Report No. : SA170822C16D Reference No. : 180418C11

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/06/12 P01 WCDMA II_RMC12.2K_Top Side_0mm_Ch9262_Sample1 DUT: 180418C11 Communication System: WCDMA; Frequency: 1852.4 MHz;Duty Cycle: 1:1 Medium: B16T20N1_0612 Medium parameters used: f = 1852.4 MHz; σ = 1.535 S/m; εr = 51.425; ρ = 1000 kg/m3 Ambient Temperature：23.7 ℃ ; Liquid Temperature：23.5 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3650; ConvF(8, 8, 8); Calibrated: 2017/07/24; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2018/01/18 - Phantom: ELI Phantom_1206; Type: QDOVA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) - Area Scan (61x241x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 1.19 W/kg - Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 25.90 V/m; Power Drift = -0.08 dB Peak SAR (extrapolated) = 1.60 W/kg SAR(1 g) = 0.750 W/kg; SAR(10 g) = 0.351 W/kg Maximum value of SAR (measured) = 1.28 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/06/12 P02 WCDMA IV_RMC12.2K_Top Side_0mm_Ch1513_Sample1 DUT: 180418C11 Communication System: WCDMA; Frequency: 1752.6 MHz;Duty Cycle: 1:1 Medium: B16T20N1_0612 Medium parameters used: f = 1753 MHz; σ = 1.444 S/m; εr = 51.718; ρ = 1000 kg/m3 Ambient Temperature：23.7 ℃ ; Liquid Temperature：23.5 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3650; ConvF(8.27, 8.27, 8.27); Calibrated: 2017/07/24; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2018/01/18 - Phantom: ELI Phantom_1206; Type: QDOVA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) - Area Scan (61x241x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 1.01 W/kg - Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 27.05 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 1.55 W/kg SAR(1 g) = 0.739 W/kg; SAR(10 g) = 0.353 W/kg Maximum value of SAR (measured) = 1.25 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/06/07 P03 WCDMA V_RMC12.2K_Top Side_0mm_Ch4132_Sample1 DUT: 180418C11 Communication System: WCDMA ; Frequency: 826.4 MHz;Duty Cycle: 1:1 Medium: B07T10N2_0607 Medium parameters used: f = 826.4 MHz; σ = 0.988 S/m; εr = 54.947; ρ = 1000 kg/m3 Ambient Temperature：23.6 ℃ ; Liquid Temperature：23.2 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3820; ConvF(9.59, 9.59, 9.59); Calibrated: 2017/06/27; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn917; Calibrated: 2017/12/14 - Phantom: ELI Phantom_1039; Type: QDOVA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) - Area Scan (61x241x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.680 W/kg - Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 26.89 V/m; Power Drift = -0.16 dB Peak SAR (extrapolated) = 1.26 W/kg SAR(1 g) = 0.567 W/kg; SAR(10 g) = 0.298 W/kg Maximum value of SAR (measured) = 0.849 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/06/06 P04 LTE 2_QPSK20M_Top Side_0mm_Ch18700_1RB_OS0_Sample1 DUT: 180418C11 Communication System: LTE; Frequency: 1860 MHz;Duty Cycle: 1:1 Medium: B16T20N1_0606 Medium parameters used: f = 1860 MHz; σ = 1.543 S/m; εr = 52.269; ρ = 1000 kg/m3 Ambient Temperature：23.6 ℃ ; Liquid Temperature：23.3 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3820; ConvF(7.62, 7.62, 7.62); Calibrated: 2017/06/27 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn917; Calibrated: 2017/12/14 - Phantom: ELI Phantom_1039; Type: QDOVA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) - Area Scan (61x241x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 1.42 W/kg - Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 28.60 V/m; Power Drift = -0.09 dB Peak SAR (extrapolated) = 2.54 W/kg SAR(1 g) = 1.19 W/kg; SAR(10 g) = 0.552 W/kg Maximum value of SAR (measured) = 1.76 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/06/07 P05 LTE 4_QPSK20M_Top Side_0mm_Ch20300_1RB_OS0_Sample1 DUT: 180418C11 Communication System: LTE; Frequency: 1745 MHz;Duty Cycle: 1:1 Medium: B16T20N2_0607 Medium parameters used: f = 1745 MHz; σ = 1.433 S/m; εr = 51.149; ρ = 1000 kg/m3 Ambient Temperature：23.6 ℃ ; Liquid Temperature：23.2 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3971; ConvF(8.34, 8.34, 8.34); Calibrated: 2018/03/26 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1431; Calibrated: 2018/03/16 - Phantom: ELI Phantom_1039; Type: QDOVA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) - Area Scan (61x241x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.910 W/kg - Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 23.41 V/m; Power Drift = -0.13 dB Peak SAR (extrapolated) = 1.91 W/kg SAR(1 g) = 0.894 W/kg; SAR(10 g) = 0.423 W/kg Maximum value of SAR (measured) = 1.55 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/06/07 P06 LTE 5_QPSK10M_Top Side_0mm_Ch20450_1RB_OS49_Sample1 DUT: 180418C11 Communication System: LTE; Frequency: 829 MHz;Duty Cycle: 1:1 Medium: B07T10N2_0607 Medium parameters used: f = 829 MHz; σ = 0.991 S/m; εr = 54.926; ρ = 1000 kg/m3 Ambient Temperature：23.6 ℃ ; Liquid Temperature：23.2 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3820; ConvF(9.59, 9.59, 9.59); Calibrated: 2017/06/27; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn917; Calibrated: 2017/12/14 - Phantom: ELI Phantom_1039; Type: QDOVA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) - Area Scan (61x241x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.754 W/kg - Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 28.55 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 1.20 W/kg SAR(1 g) = 0.539 W/kg; SAR(10 g) = 0.286 W/kg Maximum value of SAR (measured) = 0.917 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/06/07 P07 LTE 7_QPSK20M_Rear Face_0mm_Ch20850_1RB_OS50_Sample1 DUT: 180418C11 Communication System: LTE; Frequency: 2510 MHz;Duty Cycle: 1:1 Medium: B19T27N1_0607 Medium parameters used: f = 2510 MHz; σ = 2.064 S/m; εr = 51.141; ρ = 1000 kg/m3 Ambient Temperature：23.6 ℃ ; Liquid Temperature：23.2 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3820; ConvF(7.1, 7.1, 7.1); Calibrated: 2017/06/27; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn917; Calibrated: 2017/12/14 - Phantom: ELI Phantom_1039; Type: QDOVA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) - Area Scan (231x321x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 0.347 W/kg - Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 12.49 V/m; Power Drift = -0.14 dB Peak SAR (extrapolated) = 0.768 W/kg SAR(1 g) = 0.285 W/kg; SAR(10 g) = 0.107 W/kg Maximum value of SAR (measured) = 0.415 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/06/07 P08 LTE 12_QPSK10M_Top Side_0mm_Ch23130_1RB_OS0_Sample1 DUT: 180418C11 Communication System: LTE; Frequency: 711 MHz;Duty Cycle: 1:1 Medium: B06T09N1_0607 Medium parameters used: f = 711 MHz; σ = 0.941 S/m; εr = 55.447; ρ = 1000 kg/m3 Ambient Temperature：23.6 ℃ ; Liquid Temperature：23.2 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3820; ConvF(9.47, 9.47, 9.47); Calibrated: 2017/06/27; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn917; Calibrated: 2017/12/14 - Phantom: ELI Phantom_1039; Type: QDOVA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) - Area Scan (61x241x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.713 W/kg - Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 27.31 V/m; Power Drift = -0.11 dB Peak SAR (extrapolated) = 1.46 W/kg SAR(1 g) = 0.682 W/kg; SAR(10 g) = 0.354 W/kg Maximum value of SAR (measured) = 1.09 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/06/07 P09 LTE 13_QPSK10M_Top Side_0mm_Ch23230_1RB_OS0_Sample1 DUT: 180418C11 Communication System: LTE; Frequency: 782 MHz;Duty Cycle: 1:1 Medium: B06T09N1_0607 Medium parameters used: f = 782 MHz; σ = 1.003 S/m; εr = 54.837; ρ = 1000 kg/m3 Ambient Temperature：23.6 ℃ ; Liquid Temperature：23.2 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3820; ConvF(9.47, 9.47, 9.47); Calibrated: 2017/06/27; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn917; Calibrated: 2017/12/14 - Phantom: ELI Phantom_1039; Type: QDOVA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) - Area Scan (61x241x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.983 W/kg - Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 31.65 V/m; Power Drift = -0.17 dB Peak SAR (extrapolated) = 2.03 W/kg SAR(1 g) = 0.94 W/kg; SAR(10 g) = 0.497 W/kg Maximum value of SAR (measured) = 1.51 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/06/07 P10 LTE 26_QPSK15M_Top Side_0mm_Ch26765_1RB_OS74_Sample1 DUT: 180418C11 Communication System: LTE; Frequency: 821.5 MHz;Duty Cycle: 1:1 Medium: B07T10N2_0607 Medium parameters used: f = 821.5 MHz; σ = 0.983 S/m; εr = 54.991; ρ = 1000 kg/m3 Ambient Temperature：23.6 ℃ ; Liquid Temperature：23.2 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3820; ConvF(9.59, 9.59, 9.59); Calibrated: 2017/06/27; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn917; Calibrated: 2017/12/14 - Phantom: ELI Phantom_1039; Type: QDOVA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) - Area Scan (61x241x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.752 W/kg - Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 28.76 V/m; Power Drift = -0.14 dB Peak SAR (extrapolated) = 1.24 W/kg SAR(1 g) = 0.566 W/kg; SAR(10 g) = 0.297 W/kg Maximum value of SAR (measured) = 0.935 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/06/07 P11 LTE 30_QPSK10M_Rear Face_0mm_Ch27710_1RB_OS0_Sample1 DUT: 180418C11 Communication System: LTE; Frequency: 2310 MHz;Duty Cycle: 1:1 Medium: B19T27N1_0607 Medium parameters used: f = 2310 MHz; σ = 1.845 S/m; εr = 51.641; ρ = 1000 kg/m3 Ambient Temperature：23.6 ℃ ; Liquid Temperature：23.2 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3971; ConvF(7.75, 7.75, 7.75); Calibrated: 2018/03/26 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1431; Calibrated: 2018/03/16 - Phantom: ELI Phantom_1039; Type: QDOVA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) - Area Scan (231x321x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 0.856 W/kg - Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 16.94 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 0.871 W/kg SAR(1 g) = 0.473 W/kg; SAR(10 g) = 0.246 W/kg Maximum value of SAR (measured) = 0.718 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/06/07 P12 LTE 41_QPSK20M_Rear Face_0mm_Ch40185_1RB_OS0_Sample1 DUT: 180418C11 Communication System: LTE TDD CF0 ; Frequency: 2549.5 MHz;Duty Cycle: 1:1.58 Medium: B19T27N1_0607 Medium parameters used: f = 2550 MHz; σ = 2.11 S/m; εr = 51.026; ρ = 1000 kg/m3 Ambient Temperature：23.6 ℃ ; Liquid Temperature：23.2 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3820; ConvF(6.86, 6.86, 6.86); Calibrated: 2017/06/27; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn917; Calibrated: 2017/12/14 - Phantom: ELI Phantom_1039; Type: QDOVA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) - Area Scan (231x321x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 0.191 W/kg - Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 8.905 V/m; Power Drift = 0.00 dB Peak SAR (extrapolated) = 0.284 W/kg SAR(1 g) = 0.143 W/kg; SAR(10 g) = 0.072 W/kg Maximum value of SAR (measured) = 0.218 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/06/06 P13 LTE 66_QPSK20M_Top Side_0mm_Ch132572_1RB_OS0_Sample1 DUT: 180418C11 Communication System: LTE; Frequency: 1770 MHz;Duty Cycle: 1:1 Medium: B16T20N1_0606 Medium parameters used: f = 1770 MHz; σ = 1.457 S/m; εr = 52.557; ρ = 1000 kg/m3 Ambient Temperature：23.6 ℃ ; Liquid Temperature：23.3 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3820; ConvF(7.77, 7.77, 7.77); Calibrated: 2017/06/27 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn917; Calibrated: 2017/12/14 - Phantom: ELI Phantom_1039; Type: QDOVA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) - Area Scan (61x241x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 1.35 W/kg - Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 30.43 V/m; Power Drift = -0.09 dB Peak SAR (extrapolated) = 2.35 W/kg SAR(1 g) = 1.03 W/kg; SAR(10 g) = 0.490 W/kg Maximum value of SAR (measured) = 1.72 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/06/12 P14 WLAN2.4G_802.11b_Bottom Side_0mm_Ch1_Sample1_Ant0 DUT: 180418C11 Communication System: WLAN_2.4G; Frequency: 2412 MHz;Duty Cycle: 1:1 Medium: B19T27N1_0612 Medium parameters used: f = 2412 MHz; σ = 1.979 S/m; εr = 50.718; ρ = 1000 kg/m3 Ambient Temperature：23.7 ℃ ; Liquid Temperature：23.5 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3650; ConvF(7.68, 7.68, 7.68); Calibrated: 2017/07/24; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2018/01/18 - Phantom: ELI Phantom_1206; Type: QDOVA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) - Area Scan (71x301x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 0.869 W/kg - Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 19.46 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 2.03 W/kg SAR(1 g) = 0.779 W/kg; SAR(10 g) = 0.313 W/kg Maximum value of SAR (measured) = 1.25 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/06/13 P15 WLAN5G_802.11ac VH80_Bottom Side_0mm_Ch58_Sample1_Ant0 DUT: 180418C11 Communication System: WLAN_5G; Frequency: 5290 MHz;Duty Cycle: 1:1 Medium: B34T60N1_0613 Medium parameters used: f = 5290 MHz; σ = 5.492 S/m; εr = 47.608; ρ = 1000 kg/m3 Ambient Temperature：23.9 ℃ ; Liquid Temperature：23.2 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3650; ConvF(5.28, 5.28, 5.28) ; Calibrated: 2017/07/24 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2018/01/18 - Phantom: ELI Phantom_1206; Type: QDOVA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) - Area Scan (81x361x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 1.53 W/kg - Zoom Scan (6x6x12)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=2mm Reference Value = 13.30 V/m; Power Drift = -0.16 dB Peak SAR (extrapolated) = 3.33 W/kg SAR(1 g) = 0.766 W/kg; SAR(10 g) = 0.242 W/kg Maximum value of SAR (measured) = 1.80 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/06/13 P16 WLAN5G_802.11ac VH80_Bottom Side_0mm_Ch106_Sample1_Ant0 DUT: 180418C11 Communication System: WLAN_5G; Frequency: 5530 MHz;Duty Cycle: 1:1 Medium: B34T60N1_0613 Medium parameters used: f = 5530 MHz; σ = 5.833 S/m; εr = 47.073; ρ = 1000 kg/m3 Ambient Temperature：23.9 ℃ ; Liquid Temperature：23.2 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3650; ConvF(4.29, 4.29, 4.29); Calibrated: 2017/07/24 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2018/01/18 - Phantom: ELI Phantom_1206; Type: QDOVA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) - Area Scan (81x361x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 1.59 W/kg - Zoom Scan (6x6x12)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=2mm Reference Value = 14.70 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 4.82 W/kg SAR(1 g) = 0.923 W/kg; SAR(10 g) = 0.289 W/kg Maximum value of SAR (measured) = 2.24 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/06/13 P17 WLAN5G_802.11ac VH80_Bottom Side_0mm_Ch155_Sample1_Ant0 DUT: 180418C11 Communication System: WLAN_5G; Frequency: 5775 MHz;Duty Cycle: 1:1 Medium: B34T60N1_0613 Medium parameters used: f = 5775 MHz; σ = 6.193 S/m; εr = 46.634; ρ = 1000 kg/m3 Ambient Temperature：23.9 ℃ ; Liquid Temperature：23.2 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3650; ConvF(4.61, 4.61, 4.61); Calibrated: 2017/07/24 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2018/01/18 - Phantom: ELI Phantom_1206; Type: QDOVA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) - Area Scan (81x361x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 1.41 W/kg - Zoom Scan (6x6x12)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=2mm Reference Value = 12.94 V/m; Power Drift = -0.06 dB Peak SAR (extrapolated) = 3.02 W/kg SAR(1 g) = 0.692 W/kg; SAR(10 g) = 0.220 W/kg Maximum value of SAR (measured) = 1.75 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/06/12 P18 BT_BR-EDR_Top Side_0mm_Ch39_Sample1_Ant1 DUT: 180418C11 Communication System: BT; Frequency: 2441 MHz;Duty Cycle: 1:1 Medium: B19T27N1_0612 Medium parameters used: f = 2441 MHz; σ = 2.008 S/m; εr = 50.581; ρ = 1000 kg/m3 Ambient Temperature：23.7 ℃ ; Liquid Temperature：23.5 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3650; ConvF(7.68, 7.68, 7.68); Calibrated: 2017/07/24; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2018/01/18 - Phantom: ELI Phantom_1206; Type: QDOVA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) - Area Scan (71x301x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 0.124 W/kg - Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 7.093 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 0.165 W/kg SAR(1 g) = 0.077 W/kg; SAR(10 g) = 0.033 W/kg Maximum value of SAR (measured) = 0.134 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/06/18 P19 WLAN2.4G_802.11b_Bottom_0mm_Ch1_Sample1_Ant0 DUT: 180418C11 Communication System: WLAN_2.4G; Frequency: 2412 MHz;Duty Cycle: 1:1 Medium: B19T27N5_0618 Medium parameters used: f = 2412 MHz; σ = 1.998 S/m; εr = 50.62; ρ = 1000 kg/m3 Ambient Temperature：23.6 ℃ ; Liquid Temperature：23.3 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3650; ConvF(7.68, 7.68, 7.68); Calibrated: 2017/07/24 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2018/01/18 - Phantom: ELI Phantom_1206; Type: QDOVA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) - Area Scan (91x301x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 0.165 W/kg - Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 8.623 V/m; Power Drift = 0.08 dB Peak SAR (extrapolated) = 0.173 W/kg SAR(1 g) = 0.080 W/kg; SAR(10 g) = 0.039 W/kg Maximum value of SAR (measured) = 0.115 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/06/18 P20 WLAN5G_802.11ac VHT80_Bottom_0mm_Ch58_Sample1_Ant0 DUT: 180418C11 Communication System: WLAN_5G; Frequency: 5290 MHz;Duty Cycle: 1:1 Medium: B34T60N3_0618 Medium parameters used: f = 5290 MHz; σ = 5.595 S/m; εr = 48.146; ρ = 1000 kg/m3 Ambient Temperature：23.6 ℃ ; Liquid Temperature：23.3 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3650; ConvF(5.28, 5.28, 5.28); Calibrated: 2017/07/24 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2018/01/18 - Phantom: ELI Phantom_1206; Type: QDOVA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) - Area Scan (101x361x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.368 W/kg - Zoom Scan (6x6x12)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=2mm Reference Value = 6.834 V/m; Power Drift = 0.20 dB Peak SAR (extrapolated) = 0.753 W/kg SAR(1 g) = 0.137 W/kg; SAR(10 g) = 0.045 W/kg Maximum value of SAR (measured) = 0.328 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/06/18 P21 WLAN5G_802.11ac VHT80_Bottom_0mm_Ch106_Sample1_Ant0 DUT: 180418C11 Communication System: WLAN_5G; Frequency: 5530 MHz;Duty Cycle: 1:1 Medium: B34T60N3_0618 Medium parameters used: f = 5530 MHz; σ = 5.919 S/m; εr = 47.698; ρ = 1000 kg/m3 Ambient Temperature：23.6 ℃ ; Liquid Temperature：23.3 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3650; ConvF(4.29, 4.29, 4.29); Calibrated: 2017/07/24; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2018/01/18 - Phantom: ELI Phantom_1206; Type: QDOVA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) - Area Scan (101x361x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.519 W/kg - Zoom Scan (6x6x12)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=2mm Reference Value = 5.727 V/m; Power Drift = 0.11 dB Peak SAR (extrapolated) = 1.06 W/kg SAR(1 g) = 0.217 W/kg; SAR(10 g) = 0.064 W/kg Maximum value of SAR (measured) = 0.522 W/kg

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/06/18 P22 WLAN5G_802.11ac VHT80_Bottom_0mm_Ch155_Sample1_Ant0 DUT: 180418C11 Communication System: WLAN_5G; Frequency: 5775 MHz;Duty Cycle: 1:1 Medium: B34T60N2_0618 Medium parameters used: f = 5775 MHz; σ = 6.182 S/m; εr = 46.01; ρ = 1000 kg/m3 Ambient Temperature：23.6 ℃ ; Liquid Temperature：23.3 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3650; ConvF(4.61, 4.61, 4.61); Calibrated: 2017/07/24 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1277; Calibrated: 2018/01/18 - Phantom: ELI Phantom_1206; Type: QDOVA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) - Area Scan (101x361x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.320 W/kg - Zoom Scan (6x6x12)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=2mm Reference Value = 7.626 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 0.772 W/kg SAR(1 g) = 0.216 W/kg; SAR(10 g) = 0.070 W/kg Maximum value of SAR (measured) = 0.521 W/kg


Document Created: 2018-07-06 14:15:24
Document Modified: 2018-07-06 14:15:24
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC