MODULAR APPROVAL COVER LETTER

FCC ID: ZMOH330

Cover Letter(s)

Download: PDF
FCCID_1738280

Shenzhen G&T Industrial Development Co., Ltd. 5/F,A Building,Technology Building II, 1057#Nanhai Blvd,Nanshan District,Shenzhen Request for Modular Approval FCC ID: ZMOH330 Item Requirements EUT 1 Have its own RF shielding Device is equipped with metal shielding to cover RF section. Refer to external and internal photos. 2 Have buffered modulation/data All inputs to the modules are buffered through logic and microprocessor inputs (if such inputs are provided) inputs 3 Have its own power supply regulation Module chipset incorporates voltage regulation to transceiver circuitry 4 Meet the antenna requirements of The device contains a unique antenna connector, and the maximum antenna section 15.203 gain in both 850MHz and 1900MHz is 2.5dBi. 5 Demonstrate compliance in a Device is tested in a test fixture in a standalone configuration stand‐alone configuration 6 The licensed module must have a FCC FCC ID label format will be included in ID label on the module itself. That FCC the filling. Host ID label will be displayed on the host system. ID label must be visible through a window on the final device or it must be visible when an access panel, door or cover is easily removed. If not, a second label must be placed on the outside of the final device that contains the following text: Contains “FCC ID: ZMOH330” 7 The module must comply with all Please refer to “User Manual” Exhibit specific rules applicable to the transmitter. The grantee must provide comprehensive instructions to explain compliance requirements. 8 The module must comply with RF Compliance with RF exposure exposure requirements. See FCC requirements is addressed in RF Rules. Spread Spectrum transmitters exposure report (MPE). must comply with RF exposure limits in 15.247.


Document Created: 2012-07-06 11:24:20
Document Modified: 2012-07-06 11:24:20
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC