Modular Approval Letter

FCC ID: ZKJ-WCATB004

Cover Letter(s)

Download: PDF
FCCID_3744198

                                             Appliance Park, AP2-226, Louisville, KY 40225, United
                                             States
                                             Tel No : +82-31-8094-6732
                                             Fax No : +82-31-8094-7040



                            MODULAR APPROVAL LETTER
2018-01-29

Applicant : Haier US Appliance Solutions, Inc.
FCC ID : ZKJ-WCATB004

We would like to answer for Single Modular Approval in accordance with the requirement of rule part 15.212 as
described below

No.                              Requirements                                            Comment                     Comply (Y/N)
       The radio element of the modular transmitter has its own
  1                                                                        Refer to the external photo                    Y
       shielding
       The modular transmitter must have buffered modulation               All input to the modules are
  2                                                                                                                       Y
       data/inputs (if such inputs are provided)                           buffered through microprocessor inputs.
       The modular transmitter must have its own power supply              Internal power regulators
  3                                                                                                                       Y
       regulation.                                                         Refer to the Block-diagram
       The modular transmitter must comply with the antenna
  4                                                                        Refer to the internal photo                    Y
       requirements of Section 15.203 and 15.204(c).
       The modular transmitter must be tested in a stand-alone             The EUT was tested in a standalone
  5    configuration, i.e., the module must not be inside another device   configuration via a SD extension cable         Y
       during testing.                                                     Refer to the test setup photo
       The modular transmitter must be labeled with its own FCC ID.
       If the FCC ID is not visible when the module is installed inside
  6    another device, then the outside of the device into which the       Refer to the user manual                       Y
       module is installed must also display a label referring to the
       enclosed module
       The modular transmitter must comply with any specific rules or
       operating requirements that ordinarily apply to a complete
  7    transmitter and the manufacturer must provide adequate              Refer to the user manual                       Y
       instructions along with the module to explain any such
       requirements
       The modular transmitter must comply with any applicable RF          Refer to the RF exposure
  8                                                                                                                       Y
       exposure requirements                                               statement for more details.




Sincerely,




Park Hansung / Hardware RF Engineer
GE Appliances, a Haier company



Document Created: 2018-01-31 11:39:59
Document Modified: 2018-01-31 11:39:59

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC